nextcloud/build/stubs/intl.php

6847 lines
245 KiB
PHP
Raw Normal View History

<?php
// Start of intl v.1.1.0
class Collator {
const DEFAULT_VALUE = -1;
const PRIMARY = 0;
const SECONDARY = 1;
const TERTIARY = 2;
const DEFAULT_STRENGTH = 2;
const QUATERNARY = 3;
const IDENTICAL = 15;
const OFF = 16;
const ON = 17;
const SHIFTED = 20;
const NON_IGNORABLE = 21;
const LOWER_FIRST = 24;
const UPPER_FIRST = 25;
/**
* <p>
* Sort strings with different accents from the back of the string. This
* attribute is automatically set to
* On
* for the French locales and a few others. Users normally would not need
* to explicitly set this attribute. There is a string comparison
* performance cost when it is set On,
* but sort key length is unaffected. Possible values are:
* <b>Collator::ON</b>
* <b>Collator::OFF</b>(default)
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* <p>
* FRENCH_COLLATION rules
* <p>
* F=OFF cote &lt; coté &lt; côte &lt; côté
* F=ON cote &lt; côte &lt; coté &lt; côté
* </p>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const FRENCH_COLLATION = 0;
/**
* <p>
* The Alternate attribute is used to control the handling of the so called
* variable characters in the UCA: whitespace, punctuation and symbols. If
* Alternate is set to NonIgnorable
* (N), then differences among these characters are of the same importance
* as differences among letters. If Alternate is set to
* Shifted
* (S), then these characters are of only minor importance. The
* Shifted value is often used in combination with
* Strength
* set to Quaternary. In such a case, whitespace, punctuation, and symbols
* are considered when comparing strings, but only if all other aspects of
* the strings (base letters, accents, and case) are identical. If
* Alternate is not set to Shifted, then there is no difference between a
* Strength of 3 and a Strength of 4. For more information and examples,
* see Variable_Weighting in the
* UCA.
* The reason the Alternate values are not simply
* On and Off
* is that additional Alternate values may be added in the future. The UCA
* option Blanked is expressed with Strength set to 3, and Alternate set to
* Shifted. The default for most locales is NonIgnorable. If Shifted is
* selected, it may be slower if there are many strings that are the same
* except for punctuation; sort key length will not be affected unless the
* strength level is also increased.
* </p>
* <p>
* Possible values are:
* <b>Collator::NON_IGNORABLE</b>(default)
* <b>Collator::SHIFTED</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* <p>
* ALTERNATE_HANDLING rules
* <p>
* S=3, A=N di Silva &lt; Di Silva &lt; diSilva &lt; U.S.A. &lt; USA
* S=3, A=S di Silva = diSilva &lt; Di Silva &lt; U.S.A. = USA
* S=4, A=S di Silva &lt; diSilva &lt; Di Silva &lt; U.S.A. &lt; USA
* </p>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const ALTERNATE_HANDLING = 1;
/**
* <p>
* The Case_First attribute is used to control whether uppercase letters
* come before lowercase letters or vice versa, in the absence of other
* differences in the strings. The possible values are
* Uppercase_First
* (U) and Lowercase_First
* (L), plus the standard Default
* and Off.
* There is almost no difference between the Off and Lowercase_First
* options in terms of results, so typically users will not use
* Lowercase_First: only Off or Uppercase_First. (People interested in the
* detailed differences between X and L should consult the Collation
* Customization). Specifying either L or U won't affect string comparison
* performance, but will affect the sort key length.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::LOWER_FIRST</b>
* <b>Collator::UPPER_FIRST</b>
* <b>Collator:DEFAULT</b>
* </p>
* <p>
* CASE_FIRST rules
* <p>
* C=X or C=L "china" &lt; "China" &lt; "denmark" &lt; "Denmark"
* C=U "China" &lt; "china" &lt; "Denmark" &lt; "denmark"
* </p>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const CASE_FIRST = 2;
/**
* <p>
* The Case_Level attribute is used when ignoring accents but not case. In
* such a situation, set Strength to be Primary,
* and Case_Level to be On.
* In most locales, this setting is Off by default. There is a small
* string comparison performance and sort key impact if this attribute is
* set to be On.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::ON</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* <p>
* CASE_LEVEL rules
* <p>
* S=1, E=X role = Role = rôle
* S=1, E=O role = rôle &lt; Role
* </p>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const CASE_LEVEL = 3;
/**
* <p>
* The Normalization setting determines whether text is thoroughly
* normalized or not in comparison. Even if the setting is off (which is
* the default for many locales), text as represented in common usage will
* compare correctly (for details, see UTN #5). Only if the accent marks
* are in noncanonical order will there be a problem. If the setting is
* On,
* then the best results are guaranteed for all possible text input.
* There is a medium string comparison performance cost if this attribute
* is On,
* depending on the frequency of sequences that require normalization.
* There is no significant effect on sort key length. If the input text is
* known to be in NFD or NFKD normalization forms, there is no need to
* enable this Normalization option.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::ON</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const NORMALIZATION_MODE = 4;
/**
* <p>
* The ICU Collation Service supports many levels of comparison (named
* "Levels", but also known as "Strengths"). Having these categories
* enables ICU to sort strings precisely according to local conventions.
* However, by allowing the levels to be selectively employed, searching
* for a string in text can be performed with various matching conditions.
* For more detailed information, see
* <b>collator_set_strength</b> chapter.
* </p>
* <p>
* Possible values are:
* <b>Collator::PRIMARY</b>
* <b>Collator::SECONDARY</b>
* <b>Collator::TERTIARY</b>(<default)
* <b>Collator::QUATERNARY</b>
* <b>Collator::IDENTICAL</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const STRENGTH = 5;
/**
* <p>
* Compatibility with JIS x 4061 requires the introduction of an additional
* level to distinguish Hiragana and Katakana characters. If compatibility
* with that standard is required, then this attribute should be set
* On,
* and the strength set to Quaternary. This will affect sort key length
* and string comparison string comparison performance.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::ON</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const HIRAGANA_QUATERNARY_MODE = 6;
/**
* <p>
* When turned on, this attribute generates a collation key for the numeric
* value of substrings of digits. This is a way to get '100' to sort AFTER
* '2'.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::ON</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const NUMERIC_COLLATION = 7;
const SORT_REGULAR = 0;
const SORT_STRING = 1;
const SORT_NUMERIC = 2;
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a collator
* @link https://php.net/manual/en/collator.construct.php
* @param string $locale
*/
public function __construct($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a collator
* @link https://php.net/manual/en/collator.create.php
* @param string $locale <p>
* The locale containing the required collation rules. Special values for
* locales can be passed in - if null is passed for the locale, the
* default locale collation rules will be used. If empty string ("") or
* "root" are passed, UCA rules will be used.
* </p>
* @return Collator Return new instance of <b>Collator</b> object, or <b>NULL</b>
* on error.
*/
public static function create($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Compare two Unicode strings
* @link https://php.net/manual/en/collator.compare.php
* @param string $str1 <p>
* The first string to compare.
* </p>
* @param string $str2 <p>
* The second string to compare.
* </p>
* @return int Return comparison result:</p>
* <p>
* <p>
* 1 if <i>str1</i> is greater than
* <i>str2</i> ;
* </p>
* <p>
* 0 if <i>str1</i> is equal to
* <i>str2</i>;
* </p>
* <p>
* -1 if <i>str1</i> is less than
* <i>str2</i> .
* </p>
* On error
* boolean
* <b>FALSE</b>
* is returned.
*/
public function compare($str1, $str2) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array using specified collator
* @link https://php.net/manual/en/collator.sort.php
* @param array $arr <p>
* Array of strings to sort.
* </p>
* @param int $sort_flag [optional] <p>
* Optional sorting type, one of the following:
* </p>
* <p>
* <p>
* <b>Collator::SORT_REGULAR</b>
* - compare items normally (don't change types)
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function sort(array &$arr, $sort_flag = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array using specified collator and sort keys
* @link https://php.net/manual/en/collator.sortwithsortkeys.php
* @param array $arr <p>Array of strings to sort</p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function sortWithSortKeys(array &$arr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array maintaining index association
* @link https://php.net/manual/en/collator.asort.php
* @param array $arr <p>Array of strings to sort.</p>
* @param int $sort_flag [optional] <p>
* Optional sorting type, one of the following:
* <p>
* <b>Collator::SORT_REGULAR</b>
* - compare items normally (don't change types)
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function asort(array &$arr, $sort_flag = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get collation attribute value
* @link https://php.net/manual/en/collator.getattribute.php
* @param int $attr <p>
* Attribute to get value for.
* </p>
* @return int|false Attribute value, or boolean <b>FALSE</b> on error.
*/
public function getAttribute($attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set collation attribute
* @link https://php.net/manual/en/collator.setattribute.php
* @param int $attr <p>Attribute.</p>
* @param int $val <p>
* Attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setAttribute($attr, $val) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get current collation strength
* @link https://php.net/manual/en/collator.getstrength.php
* @return int|false current collation strength, or boolean <b>FALSE</b> on error.
*/
public function getStrength() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set collation strength
* @link https://php.net/manual/en/collator.setstrength.php
* @param int $strength <p>Strength to set.</p>
* <p>
* Possible values are:
* <p>
* <b>Collator::PRIMARY</b>
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setStrength($strength) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale name of the collator
* @link https://php.net/manual/en/collator.getlocale.php
* @param int $type [optional] <p>
* You can choose between valid and actual locale (
* <b>Locale::VALID_LOCALE</b> and
* <b>Locale::ACTUAL_LOCALE</b>,
* respectively). The default is the actual locale.
* </p>
* @return string Real locale name from which the collation data comes. If the collator was
* instantiated from rules or an error occurred, returns
* boolean <b>FALSE</b>.
*/
public function getLocale($type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get collator's last error code
* @link https://php.net/manual/en/collator.geterrorcode.php
* @return int Error code returned by the last Collator API function call.
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get text for collator's last error code
* @link https://php.net/manual/en/collator.geterrormessage.php
* @return string Description of an error occurred in the last Collator API function call.
*/
public function getErrorMessage() { }
/**
* (No version information available, might only be in SVN)<br/>
* Get sorting key for a string
* @link https://php.net/manual/en/collator.getsortkey.php
* @param string $str <p>
* The string to produce the key from.
* </p>
* @return string the collation key for the string. Collation keys can be compared directly instead of strings.
*/
public function getSortKey($str) { }
}
class NumberFormatter {
/**
* Decimal format defined by pattern
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PATTERN_DECIMAL = 0;
/**
* Decimal format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DECIMAL = 1;
/**
* Currency format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const CURRENCY = 2;
/**
* Percent format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PERCENT = 3;
/**
* Scientific format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SCIENTIFIC = 4;
/**
* Spellout rule-based format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SPELLOUT = 5;
/**
* Ordinal rule-based format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ORDINAL = 6;
/**
* Duration rule-based format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DURATION = 7;
/**
* Rule-based format defined by pattern
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PATTERN_RULEBASED = 9;
/**
* Alias for PATTERN_DECIMAL
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const IGNORE = 0;
/**
* Default format for the locale
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DEFAULT_STYLE = 1;
/**
* Rounding mode to round towards positive infinity.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_CEILING = 0;
/**
* Rounding mode to round towards negative infinity.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_FLOOR = 1;
/**
* Rounding mode to round towards zero.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_DOWN = 2;
/**
* Rounding mode to round away from zero.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_UP = 3;
/**
* Rounding mode to round towards the "nearest neighbor" unless both
* neighbors are equidistant, in which case, round towards the even
* neighbor.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_HALFEVEN = 4;
/**
* Rounding mode to round towards "nearest neighbor" unless both neighbors
* are equidistant, in which case round down.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_HALFDOWN = 5;
/**
* Rounding mode to round towards "nearest neighbor" unless both neighbors
* are equidistant, in which case round up.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_HALFUP = 6;
/**
* Pad characters inserted before the prefix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_BEFORE_PREFIX = 0;
/**
* Pad characters inserted after the prefix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_AFTER_PREFIX = 1;
/**
* Pad characters inserted before the suffix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_BEFORE_SUFFIX = 2;
/**
* Pad characters inserted after the suffix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_AFTER_SUFFIX = 3;
/**
* Parse integers only.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PARSE_INT_ONLY = 0;
/**
* Use grouping separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const GROUPING_USED = 1;
/**
* Always show decimal point.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DECIMAL_ALWAYS_SHOWN = 2;
/**
* Maximum integer digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MAX_INTEGER_DIGITS = 3;
/**
* Minimum integer digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MIN_INTEGER_DIGITS = 4;
/**
* Integer digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const INTEGER_DIGITS = 5;
/**
* Maximum fraction digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MAX_FRACTION_DIGITS = 6;
/**
* Minimum fraction digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MIN_FRACTION_DIGITS = 7;
/**
* Fraction digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const FRACTION_DIGITS = 8;
/**
* Multiplier.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MULTIPLIER = 9;
/**
* Grouping size.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const GROUPING_SIZE = 10;
/**
* Rounding Mode.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUNDING_MODE = 11;
/**
* Rounding increment.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUNDING_INCREMENT = 12;
/**
* The width to which the output of format() is padded.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const FORMAT_WIDTH = 13;
/**
* The position at which padding will take place. See pad position
* constants for possible argument values.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PADDING_POSITION = 14;
/**
* Secondary grouping size.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SECONDARY_GROUPING_SIZE = 15;
/**
* Use significant digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SIGNIFICANT_DIGITS_USED = 16;
/**
* Minimum significant digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MIN_SIGNIFICANT_DIGITS = 17;
/**
* Maximum significant digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MAX_SIGNIFICANT_DIGITS = 18;
/**
* Lenient parse mode used by rule-based formats.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const LENIENT_PARSE = 19;
/**
* Positive prefix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const POSITIVE_PREFIX = 0;
/**
* Positive suffix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const POSITIVE_SUFFIX = 1;
/**
* Negative prefix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const NEGATIVE_PREFIX = 2;
/**
* Negative suffix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const NEGATIVE_SUFFIX = 3;
/**
* The character used to pad to the format width.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PADDING_CHARACTER = 4;
/**
* The ISO currency code.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const CURRENCY_CODE = 5;
/**
* The default rule set. This is only available with rule-based
* formatters.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DEFAULT_RULESET = 6;
/**
* The public rule sets. This is only available with rule-based
* formatters. This is a read-only attribute. The public rulesets are
* returned as a single string, with each ruleset name delimited by ';'
* (semicolon).
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PUBLIC_RULESETS = 7;
/**
* The decimal separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DECIMAL_SEPARATOR_SYMBOL = 0;
/**
* The grouping separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const GROUPING_SEPARATOR_SYMBOL = 1;
/**
* The pattern separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PATTERN_SEPARATOR_SYMBOL = 2;
/**
* The percent sign.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PERCENT_SYMBOL = 3;
/**
* Zero.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ZERO_DIGIT_SYMBOL = 4;
/**
* Character representing a digit in the pattern.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DIGIT_SYMBOL = 5;
/**
* The minus sign.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MINUS_SIGN_SYMBOL = 6;
/**
* The plus sign.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PLUS_SIGN_SYMBOL = 7;
/**
* The currency symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const CURRENCY_SYMBOL = 8;
/**
* The international currency symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const INTL_CURRENCY_SYMBOL = 9;
/**
* The monetary separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MONETARY_SEPARATOR_SYMBOL = 10;
/**
* The exponential symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const EXPONENTIAL_SYMBOL = 11;
/**
* Per mill symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PERMILL_SYMBOL = 12;
/**
* Escape padding character.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_ESCAPE_SYMBOL = 13;
/**
* Infinity symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const INFINITY_SYMBOL = 14;
/**
* Not-a-number symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const NAN_SYMBOL = 15;
/**
* Significant digit symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SIGNIFICANT_DIGIT_SYMBOL = 16;
/**
* The monetary grouping separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MONETARY_GROUPING_SEPARATOR_SYMBOL = 17;
/**
* Derive the type from variable type
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_DEFAULT = 0;
/**
* Format/parse as 32-bit integer
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_INT32 = 1;
/**
* Format/parse as 64-bit integer
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_INT64 = 2;
/**
* Format/parse as floating point value
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_DOUBLE = 3;
/**
* Format/parse as currency value
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_CURRENCY = 4;
/**
* @param $locale
* @param $style
* @param $pattern [optional]
*/
public function __construct($locale, $style, $pattern = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a number formatter
* @link https://php.net/manual/en/numberformatter.create.php
* @param string $locale <p>
* Locale in which the number would be formatted (locale name, e.g. en_CA).
* </p>
* @param int $style <p>
* Style of the formatting, one of the
* format style constants. If
* <b>NumberFormatter::PATTERN_DECIMAL</b>
* or <b>NumberFormatter::PATTERN_RULEBASED</b>
* is passed then the number format is opened using the given pattern,
* which must conform to the syntax described in
* ICU DecimalFormat
* documentation or
* ICU RuleBasedNumberFormat
* documentation, respectively.
* </p>
* @param string $pattern [optional] <p>
* Pattern string if the chosen style requires a pattern.
* </p>
* @return NumberFormatter|false <b>NumberFormatter</b> object or <b>FALSE</b> on error.
*/
public static function create($locale, $style, $pattern = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format a number
* @link https://php.net/manual/en/numberformatter.format.php
* @param int|float $value <p>
* The value to format. Can be integer or float,
* other values will be converted to a numeric value.
* </p>
* @param int $type [optional] <p>
* The
* formatting type to use.
* </p>
* @return string|false the string containing formatted value, or <b>FALSE</b> on error.
*/
public function format($value, $type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse a number
* @link https://php.net/manual/en/numberformatter.parse.php
* @param string $value
* @param int $type [optional] <p>
* The
* formatting type to use. By default,
* <b>NumberFormatter::TYPE_DOUBLE</b> is used.
* </p>
* @param int $position [optional] <p>
* Offset in the string at which to begin parsing. On return, this value
* will hold the offset at which parsing ended.
* </p>
* @return mixed The value of the parsed number or <b>FALSE</b> on error.
*/
public function parse($value, $type = null, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format a currency value
* @link https://php.net/manual/en/numberformatter.formatcurrency.php
* @param float $value <p>
* The numeric currency value.
* </p>
* @param string $currency <p>
* The 3-letter ISO 4217 currency code indicating the currency to use.
* </p>
* @return string String representing the formatted currency value.
*/
public function formatCurrency($value, $currency) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse a currency number
* @link https://php.net/manual/en/numberformatter.parsecurrency.php
* @param string $value
* @param string $currency <p>
* Parameter to receive the currency name (3-letter ISO 4217 currency
* code).
* </p>
* @param int $position [optional] <p>
* Offset in the string at which to begin parsing. On return, this value
* will hold the offset at which parsing ended.
* </p>
* @return float|false The parsed numeric value or <b>FALSE</b> on error.
*/
public function parseCurrency($value, &$currency, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set an attribute
* @link https://php.net/manual/en/numberformatter.setattribute.php
* @param int $attr <p>
* Attribute specifier - one of the
* numeric attribute constants.
* </p>
* @param int $value <p>
* The attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setAttribute($attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get an attribute
* @link https://php.net/manual/en/numberformatter.getattribute.php
* @param int $attr <p>
* Attribute specifier - one of the
* numeric attribute constants.
* </p>
* @return int|false Return attribute value on success, or <b>FALSE</b> on error.
*/
public function getAttribute($attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set a text attribute
* @link https://php.net/manual/en/numberformatter.settextattribute.php
* @param int $attr <p>
* Attribute specifier - one of the
* text attribute
* constants.
* </p>
* @param string $value <p>
* Text for the attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setTextAttribute($attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get a text attribute
* @link https://php.net/manual/en/numberformatter.gettextattribute.php
* @param int $attr <p>
* Attribute specifier - one of the
* text attribute constants.
* </p>
* @return string|false Return attribute value on success, or <b>FALSE</b> on error.
*/
public function getTextAttribute($attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set a symbol value
* @link https://php.net/manual/en/numberformatter.setsymbol.php
* @param int $attr <p>
* Symbol specifier, one of the
* format symbol constants.
* </p>
* @param string $value <p>
* Text for the symbol.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setSymbol($attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get a symbol value
* @link https://php.net/manual/en/numberformatter.getsymbol.php
* @param int $attr <p>
* Symbol specifier, one of the
* format symbol constants.
* </p>
* @return string|false The symbol string or <b>FALSE</b> on error.
*/
public function getSymbol($attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set formatter pattern
* @link https://php.net/manual/en/numberformatter.setpattern.php
* @param string $pattern <p>
* Pattern in syntax described in
* ICU DecimalFormat
* documentation.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setPattern($pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter pattern
* @link https://php.net/manual/en/numberformatter.getpattern.php
* @return string|false Pattern string that is used by the formatter, or <b>FALSE</b> if an error happens.
*/
public function getPattern() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter locale
* @link https://php.net/manual/en/numberformatter.getlocale.php
* @param int $type [optional] <p>
* You can choose between valid and actual locale (
* <b>Locale::VALID_LOCALE</b>,
* <b>Locale::ACTUAL_LOCALE</b>,
* respectively). The default is the actual locale.
* </p>
* @return string The locale name used to create the formatter.
*/
public function getLocale($type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter's last error code.
* @link https://php.net/manual/en/numberformatter.geterrorcode.php
* @return int error code from last formatter call.
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter's last error message.
* @link https://php.net/manual/en/numberformatter.geterrormessage.php
* @return string error message from last formatter call.
*/
public function getErrorMessage() { }
}
class Normalizer {
/**
* Default normalization options
* @link https://secure.php.net/manual/en/class.normalizer.php
*/
const OPTION_DEFAULT = "";
/**
* No decomposition/composition
* @link https://secure.php.net/manual/en/class.normalizer.php
* @removed 8.0
*/
const NONE = "1";
/**
* Normalization Form D (NFD) - Canonical Decomposition
* @link https://secure.php.net/manual/en/class.normalizer.php
*/
const FORM_D = "2";
const NFD = 2;
/**
* Normalization Form KD (NFKD) - Compatibility Decomposition
* @link https://secure.php.net/manual/en/class.normalizer.php
*/
const FORM_KD = "3";
const NFKD = 3;
/**
* Normalization Form C (NFC) - Canonical Decomposition followed by
* Canonical Composition
* @link https://secure.php.net/manual/en/class.normalizer.php
*/
const FORM_C = "4";
const NFC = 4;
/**
* Normalization Form KC (NFKC) - Compatibility Decomposition, followed by
* Canonical Composition
* @link https://secure.php.net/manual/en/class.normalizer.php
*/
const FORM_KC = "5";
const NFKC = 5;
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Normalizes the input provided and returns the normalized string
* @link https://php.net/manual/en/normalizer.normalize.php
* @param string $input <p>The input string to normalize</p>
* @param string $form [optional] <p>One of the normalization forms.</p>
* @return string The normalized string or <b>NULL</b> if an error occurred.
*/
public static function normalize($input, $form = Normalizer::FORM_C) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Checks if the provided string is already in the specified normalization form.
* @link https://php.net/manual/en/normalizer.isnormalized.php
* @param string $input <p>The input string to normalize</p>
* @param string $form [optional] <p>
* One of the normalization forms.
* </p>
* @return bool <b>TRUE</b> if normalized, <b>FALSE</b> otherwise or if there an error
*/
public static function isNormalized($input, $form = Normalizer::FORM_C) { }
}
class Locale {
/**
* This is locale the data actually comes from.
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const ACTUAL_LOCALE = 0;
/**
* This is the most specific locale supported by ICU.
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const VALID_LOCALE = 1;
/**
* Used as locale parameter with the methods of the various locale affected classes,
* such as NumberFormatter. This constant would make the methods to use default
* locale.
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const DEFAULT_LOCALE = null;
/**
* Language subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const LANG_TAG = "language";
/**
* Extended language subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const EXTLANG_TAG = "extlang";
/**
* Script subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const SCRIPT_TAG = "script";
/**
* Region subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const REGION_TAG = "region";
/**
* Variant subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const VARIANT_TAG = "variant";
/**
* Grandfathered Language subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const GRANDFATHERED_LANG_TAG = "grandfathered";
/**
* Private subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const PRIVATE_TAG = "private";
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the default locale value from the INTL global 'default_locale'
* @link https://php.net/manual/en/locale.getdefault.php
* @return string The current runtime locale
*/
public static function getDefault() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* sets the default runtime locale
* @link https://php.net/manual/en/locale.setdefault.php
* @param string $locale <p>
* Is a BCP 47 compliant language tag containing the
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public static function setDefault($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the primary language for the input locale
* @link https://php.net/manual/en/locale.getprimarylanguage.php
* @param string $locale <p>
* The locale to extract the primary language code from
* </p>
* @return string The language code associated with the language or <b>NULL</b> in case of error.
*/
public static function getPrimaryLanguage($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the script for the input locale
* @link https://php.net/manual/en/locale.getscript.php
* @param string $locale <p>
* The locale to extract the script code from
* </p>
* @return string The script subtag for the locale or <b>NULL</b> if not present
*/
public static function getScript($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the region for the input locale
* @link https://php.net/manual/en/locale.getregion.php
* @param string $locale <p>
* The locale to extract the region code from
* </p>
* @return string The region subtag for the locale or <b>NULL</b> if not present
*/
public static function getRegion($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the keywords for the input locale
* @link https://php.net/manual/en/locale.getkeywords.php
* @param string $locale <p>
* The locale to extract the keywords from
* </p>
* @return array Associative array containing the keyword-value pairs for this locale
*/
public static function getKeywords($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for script of the input locale
* @link https://php.net/manual/en/locale.getdisplayscript.php
* @param string $locale <p>
* The locale to return a display script for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the script name
* </p>
* @return string Display name of the script for the $locale in the format appropriate for
* $in_locale.
*/
public static function getDisplayScript($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for region of the input locale
* @link https://php.net/manual/en/locale.getdisplayregion.php
* @param string $locale <p>
* The locale to return a display region for.
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the region name
* </p>
* @return string display name of the region for the $locale in the format appropriate for
* $in_locale.
*/
public static function getDisplayRegion($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for the input locale
* @link https://php.net/manual/en/locale.getdisplayname.php
* @param string $locale <p>
* The locale to return a display name for.
* </p>
* @param string $in_locale [optional] <p>optional format locale</p>
* @return string Display name of the locale in the format appropriate for $in_locale.
*/
public static function getDisplayName($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for language of the inputlocale
* @link https://php.net/manual/en/locale.getdisplaylanguage.php
* @param string $locale <p>
* The locale to return a display language for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the language name
* </p>
* @return string display name of the language for the $locale in the format appropriate for
* $in_locale.
*/
public static function getDisplayLanguage($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for variants of the input locale
* @link https://php.net/manual/en/locale.getdisplayvariant.php
* @param string $locale <p>
* The locale to return a display variant for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the variant name
* </p>
* @return string Display name of the variant for the $locale in the format appropriate for
* $in_locale.
*/
public static function getDisplayVariant($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns a correctly ordered and delimited locale ID
* @link https://php.net/manual/en/locale.composelocale.php
* @param array $subtags <p>
* an array containing a list of key-value pairs, where the keys identify
* the particular locale ID subtags, and the values are the associated
* subtag values.
* <p>
* The 'variant' and 'private' subtags can take maximum 15 values
* whereas 'extlang' can take maximum 3 values.e.g. Variants are allowed
* with the suffix ranging from 0-14. Hence the keys for the input array
* can be variant0, variant1, ...,variant14. In the returned locale id,
* the subtag is ordered by suffix resulting in variant0 followed by
* variant1 followed by variant2 and so on.
* </p>
* <p>
* The 'variant', 'private' and 'extlang' multiple values can be specified both
* as array under specific key (e.g. 'variant') and as multiple numbered keys
* (e.g. 'variant0', 'variant1', etc.).
* </p>
* </p>
* @return string The corresponding locale identifier.
*/
public static function composeLocale(array $subtags) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns a key-value array of locale ID subtag elements.
* @link https://php.net/manual/en/locale.parselocale.php
* @param string $locale <p>
* The locale to extract the subtag array from. Note: The 'variant' and
* 'private' subtags can take maximum 15 values whereas 'extlang' can take
* maximum 3 values.
* </p>
* @return array an array containing a list of key-value pairs, where the keys
* identify the particular locale ID subtags, and the values are the
* associated subtag values. The array will be ordered as the locale id
* subtags e.g. in the locale id if variants are '-varX-varY-varZ' then the
* returned array will have variant0=&gt;varX , variant1=&gt;varY ,
* variant2=&gt;varZ
*/
public static function parseLocale($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the variants for the input locale
* @link https://php.net/manual/en/locale.getallvariants.php
* @param string $locale <p>
* The locale to extract the variants from
* </p>
* @return array The array containing the list of all variants subtag for the locale
* or <b>NULL</b> if not present
*/
public static function getAllVariants($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Checks if a language tag filter matches with locale
* @link https://php.net/manual/en/locale.filtermatches.php
* @param string $langtag <p>
* The language tag to check
* </p>
* @param string $locale <p>
* The language range to check against
* </p>
* @param bool $canonicalize [optional] <p>
* If true, the arguments will be converted to canonical form before
* matching.
* </p>
* @return bool <b>TRUE</b> if $locale matches $langtag <b>FALSE</b> otherwise.
*/
public static function filterMatches($langtag, $locale, $canonicalize = false) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Searches the language tag list for the best match to the language
* @link https://php.net/manual/en/locale.lookup.php
* @param array $langtag <p>
* An array containing a list of language tags to compare to
* <i>locale</i>. Maximum 100 items allowed.
* </p>
* @param string $locale <p>
* The locale to use as the language range when matching.
* </p>
* @param bool $canonicalize [optional] <p>
* If true, the arguments will be converted to canonical form before
* matching.
* </p>
* @param string $default [optional] <p>
* The locale to use if no match is found.
* </p>
* @return string The closest matching language tag or default value.
*/
public static function lookup(array $langtag, $locale, $canonicalize = false, $default = null) { }
/**
* @link https://php.net/manual/en/locale.canonicalize.php
* @param string $locale
* @return string
*/
public static function canonicalize($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Tries to find out best available locale based on HTTP "Accept-Language" header
* @link https://php.net/manual/en/locale.acceptfromhttp.php
* @param string $header <p>
* The string containing the "Accept-Language" header according to format in RFC 2616.
* </p>
* @return string The corresponding locale identifier.
*/
public static function acceptFromHttp($header) { }
}
class MessageFormatter {
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Constructs a new Message Formatter
* @link https://php.net/manual/en/messageformatter.create.php
* @param string $locale <p>
* The locale to use when formatting arguments
* </p>
* @param string $pattern <p>
* The pattern string to stick arguments into.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
*/
public function __construct($locale, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Constructs a new Message Formatter
* @link https://php.net/manual/en/messageformatter.create.php
* @param string $locale <p>
* The locale to use when formatting arguments
* </p>
* @param string $pattern <p>
* The pattern string to stick arguments into.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @return MessageFormatter The formatter object
*/
public static function create($locale, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format the message
* @link https://php.net/manual/en/messageformatter.format.php
* @param array $args <p>
* Arguments to insert into the format string
* </p>
* @return string|false The formatted string, or <b>FALSE</b> if an error occurred
*/
public function format(array $args) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Quick format message
* @link https://php.net/manual/en/messageformatter.formatmessage.php
* @param string $locale <p>
* The locale to use for formatting locale-dependent parts
* </p>
* @param string $pattern <p>
* The pattern string to insert things into.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @param array $args <p>
* The array of values to insert into the format string
* </p>
* @return string|false The formatted pattern string or <b>FALSE</b> if an error occurred
*/
public static function formatMessage($locale, $pattern, array $args) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse input string according to pattern
* @link https://php.net/manual/en/messageformatter.parse.php
* @param string $value <p>
* The string to parse
* </p>
* @return array|false An array containing the items extracted, or <b>FALSE</b> on error
*/
public function parse($value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Quick parse input string
* @link https://php.net/manual/en/messageformatter.parsemessage.php
* @param string $locale <p>
* The locale to use for parsing locale-dependent parts
* </p>
* @param string $pattern <p>
* The pattern with which to parse the <i>value</i>.
* </p>
* @param string $source <p>
* The string to parse, conforming to the <i>pattern</i>.
* </p>
* @return array|false An array containing items extracted, or <b>FALSE</b> on error
*/
public static function parseMessage($locale, $pattern, $source) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the pattern used by the formatter
* @link https://php.net/manual/en/messageformatter.setpattern.php
* @param string $pattern <p>
* The pattern string to use in this message formatter.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setPattern($pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the pattern used by the formatter
* @link https://php.net/manual/en/messageformatter.getpattern.php
* @return string The pattern string for this message formatter
*/
public function getPattern() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale for which the formatter was created.
* @link https://php.net/manual/en/messageformatter.getlocale.php
* @return string The locale name
*/
public function getLocale() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error code from last operation
* @link https://php.net/manual/en/messageformatter.geterrorcode.php
* @return int The error code, one of UErrorCode values. Initial value is U_ZERO_ERROR.
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error text from the last operation
* @link https://php.net/manual/en/messageformatter.geterrormessage.php
* @return string Description of the last error.
*/
public function getErrorMessage() { }
}
class IntlDateFormatter {
/**
* Completely specified style (Tuesday, April 12, 1952 AD or 3:30:42pm PST)
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const FULL = 0;
/**
* Long style (January 12, 1952 or 3:30:32pm)
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const LONG = 1;
/**
* Medium style (Jan 12, 1952)
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const MEDIUM = 2;
/**
* Most abbreviated style, only essential data (12/13/52 or 3:30pm)
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const SHORT = 3;
/**
* Do not include this element
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const NONE = -1;
/**
* Gregorian Calendar
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const GREGORIAN = 1;
/**
* Non-Gregorian Calendar
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const TRADITIONAL = 0;
const RELATIVE_FULL = 0;
const RELATIVE_LONG = 1;
const RELATIVE_MEDIUM = 2;
const RELATIVE_SHORT = 3;
/**
* @param string|null $locale
* @param int $datetype
* @param int $timetype
* @param mixed|null $timezone [optional]
* @param mixed|null $calendar [optional]
* @param string $pattern [optional]
*/
public function __construct($locale, $datetype, $timetype, $timezone = null, $calendar = null, $pattern = '') { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a date formatter
* @link https://php.net/manual/en/intldateformatter.create.php
* @param string $locale <p>
* Locale to use when formatting or parsing; default is specified in the ini setting intl.default_locale.
* </p>
* @param int $datetype <p>
* Date type to use (<b>none</b>,
* <b>short</b>, <b>medium</b>,
* <b>long</b>, <b>full</b>).
* This is one of the
* IntlDateFormatter constants.
* </p>
* @param int $timetype <p>
* Time type to use (<b>none</b>,
* <b>short</b>, <b>medium</b>,
* <b>long</b>, <b>full</b>).
* This is one of the
* IntlDateFormatter constants.
* </p>
* @param string $timezone [optional] <p>
* Time zone ID, default is system default.
* </p>
* @param int $calendar [optional] <p>
* Calendar to use for formatting or parsing; default is Gregorian.
* This is one of the
* IntlDateFormatter calendar constants.
* </p>
* @param string $pattern [optional] <p>
* Optional pattern to use when formatting or parsing.
* Possible patterns are documented at http://userguide.icu-project.org/formatparse/datetime.
* </p>
* @return IntlDateFormatter
*/
public static function create($locale, $datetype, $timetype, $timezone = null, $calendar = null, $pattern = '') { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the datetype used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getdatetype.php
* @return int The current date type value of the formatter.
*/
public function getDateType() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the timetype used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.gettimetype.php
* @return int The current date type value of the formatter.
*/
public function getTimeType() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the calendar used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getcalendar.php
* @return int The calendar being used by the formatter.
*/
public function getCalendar() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* sets the calendar used to the appropriate calendar, which must be
* @link https://php.net/manual/en/intldateformatter.setcalendar.php
* @param int $which <p>
* The calendar to use.
* Default is <b>IntlDateFormatter::GREGORIAN</b>.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setCalendar($which) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the timezone-id used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.gettimezoneid.php
* @return string ID string for the time zone used by this formatter.
*/
public function getTimeZoneId() { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Get copy of formatter's calendar object
* @link https://secure.php.net/manual/en/intldateformatter.getcalendarobject.php
* @return IntlCalendar A copy of the internal calendar object used by this formatter.
*/
public function getCalendarObject() { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Get formatter's timezone
* @link https://secure.php.net/manual/en/intldateformatter.gettimezone.php
* @return IntlTimeZone|false The associated IntlTimeZone object or FALSE on failure.
*/
public function getTimeZone() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sets the time zone to use
* @link https://php.net/manual/en/intldateformatter.settimezoneid.php
* @param string $zone <p>
* The time zone ID string of the time zone to use.
* If <b>NULL</b> or the empty string, the default time zone for the runtime is used.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
* @deprecated 5.5 https://secure.php.net/manual/en/migration55.deprecated.php
* @removed 7.0
*/
public function setTimeZoneId($zone) { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Sets formatter's timezone
* @link https://php.net/manual/en/intldateformatter.settimezone.php
* @param mixed $zone <p>
* The timezone to use for this formatter. This can be specified in the
* following forms:
* <ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link "https://secure.php.net/manual/en/datetime.configuration.php#ini.date.timezone" date.timezone} or
* through the function {@link "https://secure.php.net/manual/en/function.date-default-timezone-set.php" date_default_timezone_set()} and as
* returned by {@link "https://secure.php.net/manual/en/function.date-default-timezone-get.php" date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link "https://secure.php.net/manual/en/class.intltimezone.php" IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link "https://secure.php.net/manual/en/class.datetimezone.php" DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
*<li>
* <p>
* A {@link "https://secure.php.net/manual/en/language.types.string.php" string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setTimeZone($zone) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the pattern used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.setpattern.php
* @param string $pattern <p>
* New pattern string to use.
* Possible patterns are documented at http://userguide.icu-project.org/formatparse/datetime.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
* Bad formatstrings are usually the cause of the failure.
*/
public function setPattern($pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the pattern used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getpattern.php
* @return string The pattern string being used to format/parse.
*/
public function getPattern() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale used by formatter
* @link https://php.net/manual/en/intldateformatter.getlocale.php
* @param int $which [optional]
* @return string|false the locale of this formatter or 'false' if error
*/
public function getLocale($which = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the leniency of the parser
* @link https://php.net/manual/en/intldateformatter.setlenient.php
* @param bool $lenient <p>
* Sets whether the parser is lenient or not, default is <b>TRUE</b> (lenient).
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setLenient($lenient) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the lenient used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.islenient.php
* @return bool <b>TRUE</b> if parser is lenient, <b>FALSE</b> if parser is strict. By default the parser is lenient.
*/
public function isLenient() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format the date/time value as a string
* @link https://php.net/manual/en/intldateformatter.format.php
* @param mixed $value <p>
* Value to format. This may be a <b>DateTime</b> object,
* an integer representing a Unix timestamp value (seconds
* since epoch, UTC) or an array in the format output by
* <b>localtime</b>.
* </p>
* @return string|false The formatted string or, if an error occurred, <b>FALSE</b>.
*/
public function format($value) { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Formats an object
* @link https://secure.php.net/manual/en/intldateformatter.formatobject.php
* @param object $object <p>
* An object of type {@link "https://secure.php.net/manual/en/class.intlcalendar.php" IntlCalendar} or {@link "https://secure.php.net/manual/en/class.datetime.php" DateTime}. The timezone information in the object will be used.
* </p>
* @param mixed $format [optional] <p>
* How to format the date/time. This can either be an {@link "https://secure.php.net/manual/en/language.types.array.php" array} with
* two elements (first the date style, then the time style, these being one
* of the constants <b>IntlDateFormatter::NONE</b>,
* <b>IntlDateFormatter::SHORT</b>,
* <b>IntlDateFormatter::MEDIUM</b>,
* <b>IntlDateFormatter::LONG</b>,
* <b>IntlDateFormatter::FULL</b>), a long with
* the value of one of these constants (in which case it will be used both
* for the time and the date) or a {@link "https://secure.php.net/manual/en/language.types.string.php" string} with the format
* described in {@link "http://www.icu-project.org/apiref/icu4c/classSimpleDateFormat.html#details" the ICU documentation}.
* If <br>NULL</br>, the default style will be used.
* </p>
* @param string $locale [optional] <p>
* The locale to use, or <b>NULL</b> to use the {@link "https://secure.php.net/manual/en/intl.configuration.php#ini.intl.default-locale"default one}.</p>
* @return string|false A string with result or <b>FALSE</b> on failure.
*/
public static function formatObject($object, $format = null, $locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse string to a timestamp value
* @link https://php.net/manual/en/intldateformatter.parse.php
* @param string $value <p>
* string to convert to a time
* </p>
* @param int $position [optional] <p>
* Position at which to start the parsing in $value (zero-based).
* If no error occurs before $value is consumed, $parse_pos will contain -1
* otherwise it will contain the position at which parsing ended (and the error occurred).
* This variable will contain the end position if the parse fails.
* If $parse_pos > strlen($value), the parse fails immediately.
* </p>
* @return int timestamp parsed value
*/
public function parse($value, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse string to a field-based time value
* @link https://php.net/manual/en/intldateformatter.localtime.php
* @param string $value <p>
* string to convert to a time
* </p>
* @param int $position [optional] <p>
* Position at which to start the parsing in $value (zero-based).
* If no error occurs before $value is consumed, $parse_pos will contain -1
* otherwise it will contain the position at which parsing ended .
* If $parse_pos > strlen($value), the parse fails immediately.
* </p>
* @return array Localtime compatible array of integers : contains 24 hour clock value in tm_hour field
*/
public function localtime($value, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error code from last operation
* @link https://php.net/manual/en/intldateformatter.geterrorcode.php
* @return int The error code, one of UErrorCode values. Initial value is U_ZERO_ERROR.
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error text from the last operation.
* @link https://php.net/manual/en/intldateformatter.geterrormessage.php
* @return string Description of the last error.
*/
public function getErrorMessage() { }
}
class ResourceBundle implements IteratorAggregate {
/**
* @param $locale
* @param $bundlename
* @param $fallback [optional]
*/
public function __construct($locale, $bundlename, $fallback) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Create a resource bundle
* @link https://php.net/manual/en/resourcebundle.create.php
* @param string $locale <p>
* Locale for which the resources should be loaded (locale name, e.g. en_CA).
* </p>
* @param string $bundlename <p>
* The directory where the data is stored or the name of the .dat file.
* </p>
* @param bool $fallback [optional] <p>
* Whether locale should match exactly or fallback to parent locale is allowed.
* </p>
* @return ResourceBundle|false <b>ResourceBundle</b> object or <b>FALSE</b> on error.
*/
public static function create($locale, $bundlename, $fallback = null) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get data from the bundle
* @link https://php.net/manual/en/resourcebundle.get.php
* @param string|int $index <p>
* Data index, must be string or integer.
* </p>
* @return mixed the data located at the index or <b>NULL</b> on error. Strings, integers and binary data strings
* are returned as corresponding PHP types, integer array is returned as PHP array. Complex types are
* returned as <b>ResourceBundle</b> object.
*/
public function get($index) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get number of elements in the bundle
* @link https://php.net/manual/en/resourcebundle.count.php
* @return int number of elements in the bundle.
*/
public function count() { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get supported locales
* @link https://php.net/manual/en/resourcebundle.locales.php
* @param string $bundlename <p>
* Path of ResourceBundle for which to get available locales, or
* empty string for default locales list.
* </p>
* @return array the list of locales supported by the bundle.
*/
public static function getLocales($bundlename) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get bundle's last error code.
* @link https://php.net/manual/en/resourcebundle.geterrorcode.php
* @return int error code from last bundle object call.
*/
public function getErrorCode() { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get bundle's last error message.
* @link https://php.net/manual/en/resourcebundle.geterrormessage.php
* @return string error message from last bundle object's call.
*/
public function getErrorMessage() { }
/**
* @since 8.0
*/
public function getIterator(){}
}
/**
* @since 5.4
*/
class Transliterator {
const FORWARD = 0;
const REVERSE = 1;
public $id;
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Private constructor to deny instantiation
* @link https://php.net/manual/en/transliterator.construct.php
*/
final private function __construct() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create a transliterator
* @link https://php.net/manual/en/transliterator.create.php
* @param string $id <p>
* The id.
* </p>
* @param int $direction [optional] <p>
* The direction, defaults to
* >Transliterator::FORWARD.
* May also be set to
* Transliterator::REVERSE.
* </p>
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure.
*/
public static function create($id, $direction = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create transliterator from rules
* @link https://php.net/manual/en/transliterator.createfromrules.php
* @param string $rules <p>
* The rules.
* </p>
* @param string $direction [optional] <p>
* The direction, defaults to
* >Transliterator::FORWARD.
* May also be set to
* Transliterator::REVERSE.
* </p>
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure.
*/
public static function createFromRules($rules, $direction = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create an inverse transliterator
* @link https://php.net/manual/en/transliterator.createinverse.php
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure
*/
public function createInverse() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get transliterator IDs
* @link https://php.net/manual/en/transliterator.listids.php
* @return array An array of registered transliterator IDs on success,
* or <b>FALSE</b> on failure.
*/
public static function listIDs() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Transliterate a string
* @link https://php.net/manual/en/transliterator.transliterate.php
* @param string $subject <p>
* The string to be transformed.
* </p>
* @param int $start [optional] <p>
* The start index (in UTF-16 code units) from which the string will start
* to be transformed, inclusive. Indexing starts at 0. The text before will
* be left as is.
* </p>
* @param int $end [optional] <p>
* The end index (in UTF-16 code units) until which the string will be
* transformed, exclusive. Indexing starts at 0. The text after will be
* left as is.
* </p>
* @return string|false The transfomed string on success, or <b>FALSE</b> on failure.
*/
public function transliterate($subject, $start = null, $end = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get last error code
* @link https://php.net/manual/en/transliterator.geterrorcode.php
* @return int The error code on success,
* or <b>FALSE</b> if none exists, or on failure.
*/
public function getErrorCode() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get last error message
* @link https://php.net/manual/en/transliterator.geterrormessage.php
* @return string The error code on success,
* or <b>FALSE</b> if none exists, or on failure.
*/
public function getErrorMessage() { }
}
/**
* @link https://php.net/manual/en/class.spoofchecker.php
*/
class Spoofchecker {
const SINGLE_SCRIPT_CONFUSABLE = 1;
const MIXED_SCRIPT_CONFUSABLE = 2;
const WHOLE_SCRIPT_CONFUSABLE = 4;
const ANY_CASE = 8;
const SINGLE_SCRIPT = 16;
const INVISIBLE = 32;
const CHAR_LIMIT = 64;
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Constructor
* @link https://php.net/manual/en/spoofchecker.construct.php
*/
public function __construct() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Checks if a given text contains any suspicious characters
* @link https://php.net/manual/en/spoofchecker.issuspicious.php
* @param string $text <p>
* </p>
* @param string $error [optional] <p>
* </p>
* @return bool
*/
public function isSuspicious($text, &$error = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Checks if a given text contains any confusable characters
* @link https://php.net/manual/en/spoofchecker.areconfusable.php
* @param string $s1 <p>
* </p>
* @param string $s2 <p>
* </p>
* @param string $error [optional] <p>
* </p>
* @return bool
*/
public function areConfusable($s1, $s2, &$error = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Locales to use when running checks
* @link https://php.net/manual/en/spoofchecker.setallowedlocales.php
* @param string $locale_list <p>
* </p>
* @return void
*/
public function setAllowedLocales($locale_list) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Set the checks to run
* @link https://php.net/manual/en/spoofchecker.setchecks.php
* @param string $checks <p>
* </p>
* @return void
*/
public function setChecks($checks) { }
}
/**
* @since 5.5
*/
class IntlGregorianCalendar extends IntlCalendar {
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @param mixed $timeZone
* @param string $locale
* @return IntlGregorianCalendar
*/
public static function createInstance($timeZone = null, $locale = null) { }
/**
* @param double $change
*
*/
public function setGregorianChange($change) { }
/**
* @return double $change
*/
public function getGregorianChange() { }
/**
* @param int $year
* @return bool
*/
public function isLeapYear($year) { }
}
/**
* @since 5.5
*/
class IntlCalendar {
/* Constants */
const FIELD_ERA = 0;
const FIELD_YEAR = 1;
const FIELD_MONTH = 2;
const FIELD_WEEK_OF_YEAR = 3;
const FIELD_WEEK_OF_MONTH = 4;
const FIELD_DATE = 5;
const FIELD_DAY_OF_YEAR = 6;
const FIELD_DAY_OF_WEEK = 7;
const FIELD_DAY_OF_WEEK_IN_MONTH = 8;
const FIELD_AM_PM = 9;
const FIELD_HOUR = 10;
const FIELD_HOUR_OF_DAY = 11;
const FIELD_MINUTE = 12;
const FIELD_SECOND = 13;
const FIELD_MILLISECOND = 14;
const FIELD_ZONE_OFFSET = 15;
const FIELD_DST_OFFSET = 16;
const FIELD_YEAR_WOY = 17;
const FIELD_DOW_LOCAL = 18;
const FIELD_EXTENDED_YEAR = 19;
const FIELD_JULIAN_DAY = 20;
const FIELD_MILLISECONDS_IN_DAY = 21;
const FIELD_IS_LEAP_MONTH = 22;
const FIELD_FIELD_COUNT = 23;
const FIELD_DAY_OF_MONTH = 5;
const DOW_SUNDAY = 1;
const DOW_MONDAY = 2;
const DOW_TUESDAY = 3;
const DOW_WEDNESDAY = 4;
const DOW_THURSDAY = 5;
const DOW_FRIDAY = 6;
const DOW_SATURDAY = 7;
const DOW_TYPE_WEEKDAY = 0;
const DOW_TYPE_WEEKEND = 1;
const DOW_TYPE_WEEKEND_OFFSET = 2;
const DOW_TYPE_WEEKEND_CEASE = 3;
const WALLTIME_FIRST = 1;
const WALLTIME_LAST = 0;
const WALLTIME_NEXT_VALID = 2;
/* Methods */
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Add a (signed) amount of time to a field
* @link https://secure.php.net/manual/en/intlcalendar.add.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param int $amount <p>The signed amount to add to the current field. If the amount is positive, the instant will be moved forward; if it is negative, the instant wil be moved into the past. The unit is implicit to the field type.
* For instance, hours for <b>IntlCalendar::FIELD_HOUR_OF_DAY</b>.</p>
* @return bool Returns TRUE on success or FALSE on failure.
*/
public function add($field, $amount) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether this object's time is after that of the passed object
* https://secure.php.net/manual/en/intlcalendar.after.php
* @param IntlCalendar $calendar <p>The calendar whose time will be checked against this object's time.</p>
* @return bool
* Returns <b>TRUE</b> if this object's current time is after that of the
* <em>calendar</em> argument's time. Returns <b>FALSE</b> otherwise.
* Also returns <b>FALSE</b> on failure. You can use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or
* {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to detect error conditions.
*/
public function after(IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether this object's time is before that of the passed object
* @link https://secure.php.net/manual/en/intlcalendar.before.php
* @param IntlCalendar $calendar <p> The calendar whose time will be checked against this object's time.</p>
* @return bool
* Returns <b>TRUE</B> if this object's current time is before that of the
* <em>calendar</em> argument's time. Returns <b>FALSE</b> otherwise.
* Also returns <b>FALSE</b> on failure. You can use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or
* {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to detect error conditions.
* </p>
*/
public function before(IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Clear a field or all fields
* @link https://secure.php.net/manual/en/intlcalendar.clear.php
* @param int $field [optional] <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure. Failure can only occur is invalid arguments are provided.
*/
public function clear($field = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Private constructor for disallowing instantiation
* @link https://secure.php.net/manual/en/intlcalendar.construct.php
*
*/
private function __construct() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a new IntlCalendar
* @link https://secure.php.net/manual/en/intlcalendar.createinstance.php
* @param mixed $timeZone [optional] <p> <p>
* The timezone to use.
* </p>
*
* <ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link https://secure.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone} or
* through the function {@link https://secure.php.net/manual/en/function.date-default-timezone-set.php date_default_timezone_set()} and as
* returned by {@link https://secure.php.net/manual/en/function.date-default-timezone-get.php date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link https://secure.php.net/manual/en/class.intltimezone.php IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link https://secure.php.net/manual/en/class.datetimezone.php DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link https://secure.php.net/manual/en/language.types.string.php string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw
* offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* </p>
* @param string $locale [optional] <p>
* A locale to use or <b>NULL</b> to use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.default-locale the default locale}.
* </p>
* @return IntlCalendar
* The created {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} instance or <b>NULL</b> on
* failure.
*/
public static function createInstance($timeZone = null, $locale = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Compare time of two IntlCalendar objects for equality
* @link https://secure.php.net/manual/en/intlcalendar.equals.php
* @param IntlCalendar $calendar
* @return bool <p>
* Returns <b>TRUE</b> if the current time of both this and the passed in
* {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} object are the same, or <b>FALSE</b>
* otherwise. The value <b>FALSE</b> can also be returned on failure. This can only
* happen if bad arguments are passed in. In any case, the two cases can be
* distinguished by calling {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()}.
* </p>
*/
public function equals($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Calculate difference between given time and this object's time
* @link https://secure.php.net/manual/en/intlcalendar.fielddifference.php
* @param float $when <p>
* The time against which to compare the quantity represented by the
* <em>field</em>. For the result to be positive, the time
* given for this parameter must be ahead of the time of the object the
* method is being invoked on.
* </p>
* @param int $field <p>
* The field that represents the quantity being compared.
* </p>
*
* <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int Returns a (signed) difference of time in the unit associated with the
* specified field or <b>FALSE</b> on failure.
*
*/
public function fieldDifference($when, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a2)<br/>
* Create an IntlCalendar from a DateTime object or string
* @link https://secure.php.net/manual/en/intlcalendar.fromdatetime.php
* @param mixed $dateTime <p>
* A {@link https://secure.php.net/manual/en/class.datetime.php DateTime} object or a {@link https://secure.php.net/manual/en/language.types.string.php string} that
* can be passed to {@link https://secure.php.net/manual/en/datetime.construct.php DateTime::__construct()}.
* </p>
* @return IntlCalendar
* The created {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} object or <b>NULL</b> in case of
* failure. If a {@link https://secure.php.net/manual/en/language.types.string.php string} is passed, any exception that occurs
* inside the {@link https://secure.php.net/manual/en/class.datetime.php DateTime} constructor is propagated.
*/
public static function fromDateTime($dateTime) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the value for a field
* @link https://secure.php.net/manual/en/intlcalendar.get.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int An integer with the value of the time field.
*/
public function get($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* The maximum value for a field, considering the object's current time
* @link https://secure.php.net/manual/en/intlcalendar.getactualmaximum.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing the maximum value in the units associated
* with the given <em>field</em> or <b>FALSE</b> on failure.
*/
public function getActualMaximum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* The minimum value for a field, considering the object's current time
* @link https://secure.php.net/manual/en/intlcalendar.getactualminimum.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing the minimum value in the field's
* unit or <b>FALSE</b> on failure.
*/
public function getActualMinimum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get array of locales for which there is data
* @link https://secure.php.net/manual/en/intlcalendar.getavailablelocales.php
* @return array An array of strings, one for which locale.
*/
public static function getAvailableLocales() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Tell whether a day is a weekday, weekend or a day that has a transition between the two
* @param int $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return int
* Returns one of the constants
* <b>IntlCalendar::DOW_TYPE_WEEKDAY</b>,
* <b>IntlCalendar::DOW_TYPE_WEEKEND</b>,
* <b>IntlCalendar::DOW_TYPE_WEEKEND_OFFSET</b> or
* <b>IntlCalendar::DOW_TYPE_WEEKEND_CEASE</b> or <b>FALSE</b> on failure.
*
*/
public function getDayOfWeekType($dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error code on the object
* @link https://secure.php.net/manual/en/intlcalendar.geterrorcode.php
* @return int An ICU error code indicating either success, failure or a warning.
*
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error message on the object
* @link https://secure.php.net/manual/en/intlcalendar.geterrormessage.php
* @return string The error message associated with last error that occurred in a function call on this object, or a string indicating the non-existance of an error.
*/
public function getErrorMessage() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the first day of the week for the calendar's locale
* @link https://secure.php.net/manual/en/intlcalendar.getfirstdayofweek.php
* @return int
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b> or <b>FALSE</b> on failure.
*
*/
public function getFirstDayOfWeek() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the largest local minimum value for a field
* @link https://secure.php.net/manual/en/intlcalendar.getgreatestminimum.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing a field value, in the field's
* unit, or <b>FALSE</b> on failure.
*/
public function getGreatestMinimum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get set of locale keyword values
* @param string $key <p>
* The locale keyword for which relevant values are to be queried. Only
* <em>'calendar'</em> is supported.
* </p>
* @param string $locale <p>
* The locale onto which the keyword/value pair are to be appended.
* </p>
* @param bool $commonlyUsed
* <p>
* Whether to show only the values commonly used for the specified locale.
* </p>
* @return Iterator|false An iterator that yields strings with the locale keyword values or <b>FALSE</b> on failure.
*/
public static function getKeywordValuesForLocale($key, $locale, $commonlyUsed) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the smallest local maximum for a field
* @link https://secure.php.net/manual/en/intlcalendar.getleastmaximum.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.ph int} representing a field value in the field's
* unit or <b>FALSE</b> on failure.
* </p>
*/
public function getLeastMaximum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the locale associated with the object
* @link https://secure.php.net/manual/en/intlcalendar.getlocale.php
* @param int $localeType <p>
* Whether to fetch the actual locale (the locale from which the calendar
* data originates, with <b>Locale::ACTUAL_LOCALE</b>) or the
* valid locale, i.e., the most specific locale supported by ICU relatively
* to the requested locale see <b>Locale::VALID_LOCALE</b>.
* From the most general to the most specific, the locales are ordered in
* this fashion actual locale, valid locale, requested locale.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
*
*/
public function getLocale($localeType) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global maximum value for a field
* @link https://secure.php.net/manual/en/intlcalendar.getmaximum.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
*/
public function getMaximum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get minimal number of days the first week in a year or month can have
* @link https://secure.php.net/manual/en/intlcalendar.getminimaldaysinfirstweek.php
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing a number of days or <b>FALSE</b> on failure.
*/
public function getMinimalDaysInFirstWeek() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global minimum value for a field
* @link https://secure.php.net/manual/en/intlcalendar.getminimum.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An int representing a value for the given field in the field's unit or FALSE on failure.
*/
public function getMinimum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get number representing the current time
* @return float A float representing a number of milliseconds since the epoch, not counting leap seconds.
*/
public static function getNow() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get behavior for handling repeating wall time
* @link https://secure.php.net/manual/en/intlcalendar.getrepeatedwalltimeoption.php
* @return int
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b> or
* <b>IntlCalendar::WALLTIME_LAST</b>.
*
*/
public function getRepeatedWallTimeOption() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get behavior for handling skipped wall time
* @link https://secure.php.net/manual/en/intlcalendar.getskippedwalltimeoption.php
* @return int
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b>,
* <b>IntlCalendar::WALLTIME_LAST</b> or
* <b>IntlCalendar::WALLTIME_NEXT_VALID</b>.
*/
public function getSkippedWallTimeOption() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get time currently represented by the object
* @return float
* A {@link https://secure.php.net/manual/en/language.types.float.php float} representing the number of milliseconds elapsed since the
* reference time (1 Jan 1970 00:00:00 UTC).
*/
public function getTime() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the object's timezone
* @link https://secure.php.net/manual/en/intlcalendar.gettimezone.php
* @return IntlTimeZone
* An {@link https://secure.php.net/manual/en/class.intltimezone.php IntlTimeZone} object corresponding to the one used
* internally in this object.
*/
public function getTimeZone() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the calendar type
* @link https://secure.php.net/manual/en/intlcalendar.gettype.php
* @return string
* A {@link https://secure.php.net/manual/en/language.types.string.php string} representing the calendar type, such as
* <em>'gregorian'</em>, <em>'islamic'</em>, etc.
*/
public function getType() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get time of the day at which weekend begins or ends
* @link https://secure.php.net/manual/en/intlcalendar.getweekendtransition.php
* @param string $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return int
* The number of milliseconds into the day at which the the weekend begins or
* ends or <b>FALSE</b> on failure.
*/
public function getWeekendTransition($dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether the object's time is in Daylight Savings Time
* @link https://secure.php.net/manual/en/intlcalendar.indaylighttime.php
* @return bool
* Returns <b>TRUE</b> if the date is in Daylight Savings Time, <b>FALSE</b> otherwise.
* The value <b>FALSE</b> may also be returned on failure, for instance after
* specifying invalid field values on non-lenient mode; use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or query
* {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to disambiguate.
*/
public function inDaylightTime() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether another calendar is equal but for a different time
* @link https://secure.php.net/manual/en/intlcalendar.isequivalentto.php
* @param IntlCalendar $calendar The other calendar against which the comparison is to be made.
* @return bool
* Assuming there are no argument errors, returns <b>TRUE</b> iif the calendars are equivalent except possibly for their set time.
*/
public function isEquivalentTo(IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether date/time interpretation is in lenient mode
* @link https://secure.php.net/manual/en/intlcalendar.islenient.php
* @return bool
* A {@link https://secure.php.net/manual/en/language.types.boolean.php bool} representing whether the calendar is set to lenient mode.
*/
public function isLenient() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether a certain date/time is in the weekend
* @link https://secure.php.net/manual/en/intlcalendar.isweekend.php
* @param float|null $date [optional] <p>
* An optional timestamp representing the number of milliseconds since the
* epoch, excluding leap seconds. If <b>NULL</b>, this object's current time is
* used instead.
* </p>
* @return bool
* <p> A {@link https://secure.php.net/manual/en/language.types.boolean.php bool} indicating whether the given or this object's time occurs
* in a weekend.
* </p>
* <p>
* The value <b>FALSE</b> may also be returned on failure, for instance after giving
* a date out of bounds on non-lenient mode; use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or query
* {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to disambiguate.</p>
*/
public function isWeekend($date = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Add value to field without carrying into more significant fields
* @link https://secure.php.net/manual/en/intlcalendar.roll.php
* @param int $field
* <p>One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time
* {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param mixed $amountOrUpOrDown <p>
* The (signed) amount to add to the field, <b>TRUE</b> for rolling up (adding
* <em>1</em>), or <b>FALSE</b> for rolling down (subtracting
* <em>1</em>).
* </p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function roll($field, $amountOrUpOrDown) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether a field is set
* @link https://secure.php.net/manual/en/intlcalendar.isset.php
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time
* {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return bool Assuming there are no argument errors, returns <b>TRUE</b> iif the field is set.
*/
public function PS_UNRESERVE_PREFIX_isSet($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set a time field or several common fields at once
* @link https://secure.php.net/manual/en/intlcalendar.set.php
* @param int $year <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param int $month <p>
* The new value for <b>IntlCalendar::FIELD_MONTH</b>.
* </p>
* @param int $dayOfMonth [optional] <p>
* The new value for <b>IntlCalendar::FIELD_DAY_OF_MONTH</b>.
* The month sequence is zero-based, i.e., January is represented by 0,
* February by 1, ..., December is 11 and Undecember (if the calendar has
* it) is 12.
* </p>
* @param int $hour [optional]
* <p>
* The new value for <b>IntlCalendar::FIELD_HOUR_OF_DAY</b>.
* </p>
* @param int $minute [optional]
* <p>
* The new value for <b>IntlCalendar::FIELD_MINUTE</b>.
* </p>
* @param int $second [optional] <p>
* The new value for <b>IntlCalendar::FIELD_SECOND</b>.
*</p>
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
*/
public function set($year, $month, $dayOfMonth = null, $hour = null, $minute = null, $second = null) { }
/**
* (PHP 5 >=5.5.0 PECL intl >= 3.0.0a1)<br/>
* Set a time field or several common fields at once
* @link https://secure.php.net/manual/en/intlcalendar.set.php
* @param int $field One of the IntlCalendar date/time field constants. These are integer values between 0 and IntlCalendar::FIELD_COUNT.
* @param int $value The new value of the given field.
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
* @since 5.5
*/
public function set($field, $value) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the day on which the week is deemed to start
* @link https://secure.php.net/manual/en/intlcalendar.setfirstdayofweek.php
* @param int $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return bool Returns TRUE on success. Failure can only happen due to invalid parameters.
*/
public function setFirstDayOfWeek($dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set whether date/time interpretation is to be lenient
* @link https://secure.php.net/manual/en/intlcalendar.setlenient.php
* @param string $isLenient <p>
* Use <b>TRUE</b> to activate the lenient mode; <b>FALSE</b> otherwise.
* </p>
* @return bool Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
*/
public function setLenient($isLenient) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set behavior for handling repeating wall times at negative timezone offset transitions
* @link https://secure.php.net/manual/en/intlcalendar.setrepeatedwalltimeoption.php
* @param int $wallTimeOption <p>
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b> or
* <b>IntlCalendar::WALLTIME_LAST</b>.
* </p>
* @return bool
* Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
*
*/
public function setRepeatedWallTimeOption($wallTimeOption) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set behavior for handling skipped wall times at positive timezone offset transitions
* @link https://secure.php.net/manual/en/intlcalendar.setskippedwalltimeoption.php
* @param int $wallTimeOption <p>
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b>,
* <b>IntlCalendar::WALLTIME_LAST</b> or
* <b>IntlCalendar::WALLTIME_NEXT_VALID</b>.
* </p>
* @return bool
* <p>
* Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
* </p>
*/
public function setSkippedWallTimeOption($wallTimeOption) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the calendar time in milliseconds since the epoch
* @link https://secure.php.net/manual/en/intlcalendar.settime.php
* @param float $date <p>
* An instant represented by the number of number of milliseconds between
* such instant and the epoch, ignoring leap seconds.
* </p>
* @return bool
* Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
*/
public function setTime($date) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the timezone used by this calendar
* @link https://secure.php.net/manual/en/intlcalendar.settimezone.php
* @param mixed $timeZone <p>
* The new timezone to be used by this calendar. It can be specified in the
* following ways:
*
* </p><ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link https://secure.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone} or
* through the function {@link https://secure.php.net/manual/en/function.date-default-timezone-set.php date_default_timezone_set()} and as
* returned by {@link https://secure.php.net/manual/en/function.date-default-timezone-get.php date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link https://secure.php.net/manual/en/class.intltimezone.php IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link https://secure.php.net/manual/en/class.datetimezone.php DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link https://secure.php.net/manual/en/language.types.string.php string}, which should be a valid ICU timezone identifier.
* See b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw
* offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
*/
public function setTimeZone($timeZone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a2)<br/>
* Convert an IntlCalendar into a DateTime object
* @link https://secure.php.net/manual/en/intlcalendar.todatetime.php
* @return DateTime|false
* A {@link https://secure.php.net/manual/en/class.datetime.php DateTime} object with the same timezone as this
* object (though using PHP's database instead of ICU's) and the same time,
* except for the smaller precision (second precision instead of millisecond).
* Returns <b>FALSE</b> on failure.
*/
public function toDateTime() { }
}
/**
* @since 5.5
*/
class IntlIterator implements Iterator {
public function current() { }
public function key() { }
public function next() { }
public function rewind() { }
public function valid() { }
}
/**
* @since 5.5
*/
class IntlException extends Exception {
}
/**
* @since 5.5
*/
class IntlTimeZone {
/* Constants */
const DISPLAY_SHORT = 1;
const DISPLAY_LONG = 2;
/* Methods */
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the number of IDs in the equivalency group that includes the given ID
* @link https://secure.php.net/manual/en/intltimezone.countequivalentids.php
* @param string $zoneId
* @return int|false number of IDs or <b>FALSE</b> on failure
*/
public static function countEquivalentIDs($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a new copy of the default timezone for this host
* @link https://secure.php.net/manual/en/intltimezone.createdefault.php
* @return IntlTimeZone
*/
public static function createDefault() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get an enumeration over time zone IDs associated with the given country or offset
* @link https://secure.php.net/manual/en/intltimezone.createenumeration.php
* @param mixed $countryOrRawOffset [optional]
* @return IntlIterator|false an iterator or <b>FALSE</b> on failure
*/
public static function createEnumeration($countryOrRawOffset) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a timezone object for the given ID
* @link https://secure.php.net/manual/en/intltimezone.createtimezone.php
* @param string $zoneId
* @return IntlTimeZone|null a timezone object or <b>NULL</b> on failure
*/
public static function createTimeZone($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get an enumeration over system time zone IDs with the given filter conditions
* @link https://secure.php.net/manual/en/intltimezone.createtimezoneidenumeration.php
* @param int $zoneType
* @param string|null $region [optional]
* @param int $rawOffset [optional]
* @return IntlIterator|false an iterator or <b>FALSE</b> on failure
*/
public static function createTimeZoneIDEnumeration($zoneType, $region = null, $rawOffset = 0) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a timezone object from DateTimeZone
* @link https://secure.php.net/manual/en/intltimezone.fromdatetimezone.php
* @param DateTimeZone $zoneId
* @return IntlTimeZone|null a timezone object or <b>NULL</b> on failure
*/
public static function fromDateTimeZone($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the canonical system timezone ID or the normalized custom time zone ID for the given time zone ID
* @link https://secure.php.net/manual/en/intltimezone.getcanonicalid.php
* @param string $zoneId
* @param bool $isSystemID [optional]
* @return string|false the timezone ID or <b>FALSE</b> on failure
*/
public static function getCanonicalID($zoneId, &$isSystemID) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get a name of this time zone suitable for presentation to the user
* @param bool $isDaylight [optional]
* @param int $style [optional]
* @param string $locale [optional]
* @return string|false the timezone name or <b>FALSE</b> on failure
*/
public function getDisplayName($isDaylight, $style, $locale) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the amount of time to be added to local standard time to get local wall clock time
* @link https://secure.php.net/manual/en/intltimezone.getequivalentid.php
* @return int
*/
public function getDSTSavings() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get an ID in the equivalency group that includes the given ID
* @link https://secure.php.net/manual/en/intltimezone.getequivalentid.php
* @param string $zoneId
* @param int $index
* @return string|false the time zone ID or <b>FALSE</b> on failure
*/
public static function getEquivalentID($zoneId, $index) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error code on the object
* @link https://secure.php.net/manual/en/intltimezone.geterrorcode.php
* @return int
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error message on the object
* @link https://secure.php.net/manual/en/intltimezone.geterrormessage.php
* @return string
*/
public function getErrorMessage() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create GMT (UTC) timezone
* @link https://secure.php.net/manual/en/intltimezone.getgmt.php
* @return IntlTimeZone
*/
public static function getGMT() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get timezone ID
* @return string
*/
public function getID() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the time zone raw and GMT offset for the given moment in time
* @link https://secure.php.net/manual/en/intltimezone.getoffset.php
* @param float $date
* moment in time for which to return offsets, in units of milliseconds from
* January 1, 1970 0:00 GMT, either GMT time or local wall time, depending on
* `local'.
* @param bool $local
* if true, `date' is local wall time; otherwise it is in GMT time.
* @param int &$rawOffset
* output parameter to receive the raw offset, that is, the offset not
* including DST adjustments
* @param int &$dstOffset
* output parameter to receive the DST offset, that is, the offset to be added
* to `rawOffset' to obtain the total offset between local and GMT time. If
* DST is not in effect, this value is zero; otherwise it is a positive value,
* typically one hour.
* @return bool boolean indication of success
*/
public function getOffset($date, $local, &$rawOffset, &$dstOffset) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the raw GMT offset (before taking daylight savings time into account
* @link https://secure.php.net/manual/en/intltimezone.getrawoffset.php
* @return int
*/
public function getRawOffset() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the region code associated with the given system time zone ID
* @link https://secure.php.net/manual/en/intltimezone.getregion.php
* @param string $zoneId
* @return string|false region or <b>FALSE</b> on failure
*/
public static function getRegion($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the timezone data version currently used by ICU
* @link https://secure.php.net/manual/en/intltimezone.gettzdataversion.php
* @return string
*/
public static function getTZDataVersion() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the "unknown" time zone
* @link https://secure.php.net/manual/en/intltimezone.getunknown.php
* @return IntlTimeZone
*/
public static function getUnknown() { }
/**
* (PHP 7 &gt;=7.1.0)<br/>
* Translates a system timezone (e.g. "America/Los_Angeles") into a Windows
* timezone (e.g. "Pacific Standard Time").
* @link https://secure.php.net/manual/en/intltimezone.getwindowsid.php
* @param string $timezone
* @return string|false the Windows timezone or <b>FALSE</b> on failure
* @since 7.1
*/
public static function getWindowsID($timezone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Check if this zone has the same rules and offset as another zone
* @link https://secure.php.net/manual/en/intltimezone.hassamerules.php
* @param IntlTimeZone $otherTimeZone
* @return bool
*/
public function hasSameRules(IntlTimeZone $otherTimeZone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Convert to DateTimeZone object
* @link https://secure.php.net/manual/ru/intltimezone.todatetimezone.php
* @return DateTimeZone|false the DateTimeZone object or <b>FALSE</b> on failure
*/
public function toDateTimeZone() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Check if this time zone uses daylight savings time
* @link https://secure.php.net/manual/ru/intltimezone.usedaylighttime.php
* @return bool
*/
public function useDaylightTime() { }
}
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a collator
* @link https://php.net/manual/en/collator.create.php
* @param string $locale <p>
* The locale containing the required collation rules. Special values for
* locales can be passed in - if null is passed for the locale, the
* default locale collation rules will be used. If empty string ("") or
* "root" are passed, UCA rules will be used.
* </p>
* @return Collator Return new instance of <b>Collator</b> object, or <b>NULL</b>
* on error.
*/
function collator_create($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Compare two Unicode strings
* @link https://php.net/manual/en/collator.compare.php
* @param Collator $object
* @param string $str1 <p>
* The first string to compare.
* </p>
* @param string $str2 <p>
* The second string to compare.
* </p>
* @return int Return comparison result:</p>
* <p>
* <p>
* 1 if <i>str1</i> is greater than
* <i>str2</i> ;
* </p>
* <p>
* 0 if <i>str1</i> is equal to
* <i>str2</i>;
* </p>
* <p>
* -1 if <i>str1</i> is less than
* <i>str2</i> .
* </p>
* On error
* boolean
* <b>FALSE</b>
* is returned.
*/
function collator_compare(Collator $object, $str1, $str2) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get collation attribute value
* @link https://php.net/manual/en/collator.getattribute.php
* @param Collator $object
* @param int $attr <p>
* Attribute to get value for.
* </p>
* @return int|false Attribute value, or boolean <b>FALSE</b> on error.
*/
function collator_get_attribute(Collator $object, $attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set collation attribute
* @link https://php.net/manual/en/collator.setattribute.php
* @param Collator $object
* @param int $attr <p>Attribute.</p>
* @param int $val <p>
* Attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_set_attribute(Collator $object, $attr, $val) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get current collation strength
* @link https://php.net/manual/en/collator.getstrength.php
* @param Collator $object
* @return int|false current collation strength, or boolean <b>FALSE</b> on error.
*/
function collator_get_strength(Collator $object) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set collation strength
* @link https://php.net/manual/en/collator.setstrength.php
* @param Collator $object
* @param int $strength <p>Strength to set.</p>
* <p>
* Possible values are:
* <p>
* <b>Collator::PRIMARY</b>
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_set_strength(Collator $object, $strength) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array using specified collator
* @link https://php.net/manual/en/collator.sort.php
* @param Collator $object
* @param array $arr <p>
* Array of strings to sort.
* </p>
* @param int $sort_flag [optional] <p>
* Optional sorting type, one of the following:
* </p>
* <p>
* <p>
* <b>Collator::SORT_REGULAR</b>
* - compare items normally (don't change types)
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_sort(Collator $object, array &$arr, $sort_flag = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array using specified collator and sort keys
* @link https://php.net/manual/en/collator.sortwithsortkeys.php
* @param Collator $object
* @param array $arr <p>Array of strings to sort</p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_sort_with_sort_keys(Collator $object, array &$arr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array maintaining index association
* @link https://php.net/manual/en/collator.asort.php
* @param Collator $object
* @param array $arr <p>Array of strings to sort.</p>
* @param int $sort_flag [optional] <p>
* Optional sorting type, one of the following:
* <p>
* <b>Collator::SORT_REGULAR</b>
* - compare items normally (don't change types)
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_asort(Collator $object, array &$arr, $sort_flag = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale name of the collator
* @link https://php.net/manual/en/collator.getlocale.php
* @param Collator $object
* @param int $type [optional] <p>
* You can choose between valid and actual locale (
* <b>Locale::VALID_LOCALE</b> and
* <b>Locale::ACTUAL_LOCALE</b>,
* respectively). The default is the actual locale.
* </p>
* @return string Real locale name from which the collation data comes. If the collator was
* instantiated from rules or an error occurred, returns
* boolean <b>FALSE</b>.
*/
function collator_get_locale(Collator $object, $type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get collator's last error code
* @link https://php.net/manual/en/collator.geterrorcode.php
* @param Collator $object
* @return int Error code returned by the last Collator API function call.
*/
function collator_get_error_code(Collator $object) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get text for collator's last error code
* @link https://php.net/manual/en/collator.geterrormessage.php
* @param Collator $object
* @return string Description of an error occurred in the last Collator API function call.
*/
function collator_get_error_message(Collator $object) { }
/**
* (No version information available, might only be in SVN)<br/>
* Get sorting key for a string
* @link https://php.net/manual/en/collator.getsortkey.php
* @param Collator $object
* @param string $str <p>
* The string to produce the key from.
* </p>
* @return string the collation key for the string. Collation keys can be compared directly instead of strings.
*/
function collator_get_sort_key(Collator $object, $str) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a number formatter
* @link https://php.net/manual/en/numberformatter.create.php
* @param string $locale <p>
* Locale in which the number would be formatted (locale name, e.g. en_CA).
* </p>
* @param int $style <p>
* Style of the formatting, one of the
* format style constants. If
* <b>NumberFormatter::PATTERN_DECIMAL</b>
* or <b>NumberFormatter::PATTERN_RULEBASED</b>
* is passed then the number format is opened using the given pattern,
* which must conform to the syntax described in
* ICU DecimalFormat
* documentation or
* ICU RuleBasedNumberFormat
* documentation, respectively.
* </p>
* @param string $pattern [optional] <p>
* Pattern string if the chosen style requires a pattern.
* </p>
* @return NumberFormatter|false <b>NumberFormatter</b> object or <b>FALSE</b> on error.
*/
function numfmt_create($locale, $style, $pattern = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format a number
* @link https://php.net/manual/en/numberformatter.format.php
* @param NumberFormatter $fmt
* @param int|float $value <p>
* The value to format. Can be integer or float,
* other values will be converted to a numeric value.
* </p>
* @param int $type [optional] <p>
* The
* formatting type to use.
* </p>
* @return string|false the string containing formatted value, or <b>FALSE</b> on error.
*/
function numfmt_format(NumberFormatter $fmt, $value, $type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse a number
* @link https://php.net/manual/en/numberformatter.parse.php
* @param NumberFormatter $fmt
* @param string $value
* @param int $type [optional] <p>
* The
* formatting type to use. By default,
* <b>NumberFormatter::TYPE_DOUBLE</b> is used.
* </p>
* @param int $position [optional] <p>
* Offset in the string at which to begin parsing. On return, this value
* will hold the offset at which parsing ended.
* </p>
* @return mixed The value of the parsed number or <b>FALSE</b> on error.
*/
function numfmt_parse(NumberFormatter $fmt, $value, $type = null, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format a currency value
* @link https://php.net/manual/en/numberformatter.formatcurrency.php
* @param NumberFormatter $fmt
* @param float $value <p>
* The numeric currency value.
* </p>
* @param string $currency <p>
* The 3-letter ISO 4217 currency code indicating the currency to use.
* </p>
* @return string String representing the formatted currency value.
*/
function numfmt_format_currency(NumberFormatter $fmt, $value, $currency) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse a currency number
* @link https://php.net/manual/en/numberformatter.parsecurrency.php
* @param NumberFormatter $fmt
* @param string $value
* @param string $currency <p>
* Parameter to receive the currency name (3-letter ISO 4217 currency
* code).
* </p>
* @param int $position [optional] <p>
* Offset in the string at which to begin parsing. On return, this value
* will hold the offset at which parsing ended.
* </p>
* @return float|false The parsed numeric value or <b>FALSE</b> on error.
*/
function numfmt_parse_currency(NumberFormatter $fmt, $value, &$currency, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set an attribute
* @link https://php.net/manual/en/numberformatter.setattribute.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Attribute specifier - one of the
* numeric attribute constants.
* </p>
* @param int $value <p>
* The attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function numfmt_set_attribute(NumberFormatter $fmt, $attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get an attribute
* @link https://php.net/manual/en/numberformatter.getattribute.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Attribute specifier - one of the
* numeric attribute constants.
* </p>
* @return int|false Return attribute value on success, or <b>FALSE</b> on error.
*/
function numfmt_get_attribute(NumberFormatter $fmt, $attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set a text attribute
* @link https://php.net/manual/en/numberformatter.settextattribute.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Attribute specifier - one of the
* text attribute
* constants.
* </p>
* @param string $value <p>
* Text for the attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function numfmt_set_text_attribute(NumberFormatter $fmt, $attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get a text attribute
* @link https://php.net/manual/en/numberformatter.gettextattribute.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Attribute specifier - one of the
* text attribute constants.
* </p>
* @return string|false Return attribute value on success, or <b>FALSE</b> on error.
*/
function numfmt_get_text_attribute(NumberFormatter $fmt, $attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set a symbol value
* @link https://php.net/manual/en/numberformatter.setsymbol.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Symbol specifier, one of the
* format symbol constants.
* </p>
* @param string $value <p>
* Text for the symbol.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function numfmt_set_symbol(NumberFormatter $fmt, $attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get a symbol value
* @link https://php.net/manual/en/numberformatter.getsymbol.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Symbol specifier, one of the
* format symbol constants.
* </p>
* @return string|false The symbol string or <b>FALSE</b> on error.
*/
function numfmt_get_symbol(NumberFormatter $fmt, $attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set formatter pattern
* @link https://php.net/manual/en/numberformatter.setpattern.php
* @param NumberFormatter $fmt
* @param string $pattern <p>
* Pattern in syntax described in
* ICU DecimalFormat
* documentation.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function numfmt_set_pattern(NumberFormatter $fmt, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter pattern
* @link https://php.net/manual/en/numberformatter.getpattern.php
* @param NumberFormatter $fmt
* @param $nf
* @return string|false Pattern string that is used by the formatter, or <b>FALSE</b> if an error happens.
*/
function numfmt_get_pattern(NumberFormatter $fmt, $nf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter locale
* @link https://php.net/manual/en/numberformatter.getlocale.php
* @param NumberFormatter $fmt
* @param int $type [optional] <p>
* You can choose between valid and actual locale (
* <b>Locale::VALID_LOCALE</b>,
* <b>Locale::ACTUAL_LOCALE</b>,
* respectively). The default is the actual locale.
* </p>
* @return string The locale name used to create the formatter.
*/
function numfmt_get_locale(NumberFormatter $fmt, $type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter's last error code.
* @link https://php.net/manual/en/numberformatter.geterrorcode.php
* @param NumberFormatter $fmt
* @param $nf
* @return int error code from last formatter call.
*/
function numfmt_get_error_code(NumberFormatter $fmt, $nf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter's last error message.
* @link https://php.net/manual/en/numberformatter.geterrormessage.php
* @param NumberFormatter $fmt
* @param $nf
* @return string error message from last formatter call.
*/
function numfmt_get_error_message(NumberFormatter $fmt, $nf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Normalizes the input provided and returns the normalized string
* @link https://php.net/manual/en/normalizer.normalize.php
* @param string $input <p>The input string to normalize</p>
* @param string $form [optional] <p>One of the normalization forms.</p>
* @return string The normalized string or <b>NULL</b> if an error occurred.
*/
function normalizer_normalize($input, $form = Normalizer::FORM_C) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Checks if the provided string is already in the specified normalization
form.
* @link https://php.net/manual/en/normalizer.isnormalized.php
* @param string $input <p>The input string to normalize</p>
* @param string $form [optional] <p>
* One of the normalization forms.
* </p>
* @return bool <b>TRUE</b> if normalized, <b>FALSE</b> otherwise or if there an error
*/
function normalizer_is_normalized($input, $form = Normalizer::FORM_C) { }
/**
* Get the default Locale
* @link https://php.net/manual/en/function.locale-get-default.php
* @return string a string with the current Locale.
*/
function locale_get_default() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the default Locale
* @link https://php.net/manual/en/function.locale-set-default.php
* @param string $name <p>
* The new Locale name. A comprehensive list of the supported locales is
* available at .
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function locale_set_default($name) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the primary language for the input locale
* @link https://php.net/manual/en/locale.getprimarylanguage.php
* @param string $locale <p>
* The locale to extract the primary language code from
* </p>
* @return string The language code associated with the language or <b>NULL</b> in case of error.
*/
function locale_get_primary_language($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the script for the input locale
* @link https://php.net/manual/en/locale.getscript.php
* @param string $locale <p>
* The locale to extract the script code from
* </p>
* @return string The script subtag for the locale or <b>NULL</b> if not present
*/
function locale_get_script($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the region for the input locale
* @link https://php.net/manual/en/locale.getregion.php
* @param string $locale <p>
* The locale to extract the region code from
* </p>
* @return string The region subtag for the locale or <b>NULL</b> if not present
*/
function locale_get_region($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the keywords for the input locale
* @link https://php.net/manual/en/locale.getkeywords.php
* @param string $locale <p>
* The locale to extract the keywords from
* </p>
* @return array Associative array containing the keyword-value pairs for this locale
*/
function locale_get_keywords($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for script of the input locale
* @link https://php.net/manual/en/locale.getdisplayscript.php
* @param string $locale <p>
* The locale to return a display script for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the script name
* </p>
* @return string Display name of the script for the $locale in the format appropriate for
* $in_locale.
*/
function locale_get_display_script($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for region of the input locale
* @link https://php.net/manual/en/locale.getdisplayregion.php
* @param string $locale <p>
* The locale to return a display region for.
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the region name
* </p>
* @return string display name of the region for the $locale in the format appropriate for
* $in_locale.
*/
function locale_get_display_region($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for the input locale
* @link https://php.net/manual/en/locale.getdisplayname.php
* @param string $locale <p>
* The locale to return a display name for.
* </p>
* @param string $in_locale [optional] <p>optional format locale</p>
* @return string Display name of the locale in the format appropriate for $in_locale.
*/
function locale_get_display_name($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for language of the inputlocale
* @link https://php.net/manual/en/locale.getdisplaylanguage.php
* @param string $locale <p>
* The locale to return a display language for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the language name
* </p>
* @return string display name of the language for the $locale in the format appropriate for
* $in_locale.
*/
function locale_get_display_language($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for variants of the input locale
* @link https://php.net/manual/en/locale.getdisplayvariant.php
* @param string $locale <p>
* The locale to return a display variant for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the variant name
* </p>
* @return string Display name of the variant for the $locale in the format appropriate for
* $in_locale.
*/
function locale_get_display_variant($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns a correctly ordered and delimited locale ID
* @link https://php.net/manual/en/locale.composelocale.php
* @param array $subtags <p>
* an array containing a list of key-value pairs, where the keys identify
* the particular locale ID subtags, and the values are the associated
* subtag values.
* <p>
* The 'variant' and 'private' subtags can take maximum 15 values
* whereas 'extlang' can take maximum 3 values.e.g. Variants are allowed
* with the suffix ranging from 0-14. Hence the keys for the input array
* can be variant0, variant1, ...,variant14. In the returned locale id,
* the subtag is ordered by suffix resulting in variant0 followed by
* variant1 followed by variant2 and so on.
* </p>
* <p>
* The 'variant', 'private' and 'extlang' multiple values can be specified both
* as array under specific key (e.g. 'variant') and as multiple numbered keys
* (e.g. 'variant0', 'variant1', etc.).
* </p>
* </p>
* @return string The corresponding locale identifier.
*/
function locale_compose(array $subtags) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns a key-value array of locale ID subtag elements.
* @link https://php.net/manual/en/locale.parselocale.php
* @param string $locale <p>
* The locale to extract the subtag array from. Note: The 'variant' and
* 'private' subtags can take maximum 15 values whereas 'extlang' can take
* maximum 3 values.
* </p>
* @return array an array containing a list of key-value pairs, where the keys
* identify the particular locale ID subtags, and the values are the
* associated subtag values. The array will be ordered as the locale id
* subtags e.g. in the locale id if variants are '-varX-varY-varZ' then the
* returned array will have variant0=&gt;varX , variant1=&gt;varY ,
* variant2=&gt;varZ
*/
function locale_parse($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the variants for the input locale
* @link https://php.net/manual/en/locale.getallvariants.php
* @param string $locale <p>
* The locale to extract the variants from
* </p>
* @return array The array containing the list of all variants subtag for the locale
* or <b>NULL</b> if not present
*/
function locale_get_all_variants($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Checks if a language tag filter matches with locale
* @link https://php.net/manual/en/locale.filtermatches.php
* @param string $langtag <p>
* The language tag to check
* </p>
* @param string $locale <p>
* The language range to check against
* </p>
* @param bool $canonicalize [optional] <p>
* If true, the arguments will be converted to canonical form before
* matching.
* </p>
* @return bool <b>TRUE</b> if $locale matches $langtag <b>FALSE</b> otherwise.
*/
function locale_filter_matches($langtag, $locale, $canonicalize = false) { }
/**
* @param $arg1
*/
function locale_canonicalize($arg1) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Searches the language tag list for the best match to the language
* @link https://php.net/manual/en/locale.lookup.php
* @param array $langtag <p>
* An array containing a list of language tags to compare to
* <i>locale</i>. Maximum 100 items allowed.
* </p>
* @param string $locale <p>
* The locale to use as the language range when matching.
* </p>
* @param bool $canonicalize [optional] <p>
* If true, the arguments will be converted to canonical form before
* matching.
* </p>
* @param string $default [optional] <p>
* The locale to use if no match is found.
* </p>
* @return string The closest matching language tag or default value.
*/
function locale_lookup(array $langtag, $locale, $canonicalize = false, $default = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Tries to find out best available locale based on HTTP "Accept-Language" header
* @link https://php.net/manual/en/locale.acceptfromhttp.php
* @param string $header <p>
* The string containing the "Accept-Language" header according to format in RFC 2616.
* </p>
* @return string The corresponding locale identifier.
*/
function locale_accept_from_http($header) { }
/**
* @param $locale
* @param $pattern
*/
function msgfmt_create($locale, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format the message
* @link https://php.net/manual/en/messageformatter.format.php
* @param MessageFormatter $fmt
* @param array $args <p>
* Arguments to insert into the format string
* </p>
* @return string|false The formatted string, or <b>FALSE</b> if an error occurred
*/
function msgfmt_format(MessageFormatter $fmt, array $args) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Quick format message
* @link https://php.net/manual/en/messageformatter.formatmessage.php
* @param string $locale <p>
* The locale to use for formatting locale-dependent parts
* </p>
* @param string $pattern <p>
* The pattern string to insert things into.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @param array $args <p>
* The array of values to insert into the format string
* </p>
* @return string|false The formatted pattern string or <b>FALSE</b> if an error occurred
*/
function msgfmt_format_message(string $locale, string $pattern, array $args) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse input string according to pattern
* @link https://php.net/manual/en/messageformatter.parse.php
* @param MessageFormatter $fmt
* @param string $value <p>
* The string to parse
* </p>
* @return array|false An array containing the items extracted, or <b>FALSE</b> on error
*/
function msgfmt_parse(MessageFormatter $fmt, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Quick parse input string
* @link https://php.net/manual/en/messageformatter.parsemessage.php
* @param MessageFormatter $fmt
* @param string $locale <p>
* The locale to use for parsing locale-dependent parts
* </p>
* @param string $pattern <p>
* The pattern with which to parse the <i>value</i>.
* </p>
* @param string $source <p>
* The string to parse, conforming to the <i>pattern</i>.
* </p>
* @return array|false An array containing items extracted, or <b>FALSE</b> on error
*/
function msgfmt_parse_message(MessageFormatter $fmt, $locale, $pattern, $source) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the pattern used by the formatter
* @link https://php.net/manual/en/messageformatter.setpattern.php
* @param MessageFormatter $fmt
* @param string $pattern <p>
* The pattern string to use in this message formatter.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function msgfmt_set_pattern(MessageFormatter $fmt, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the pattern used by the formatter
* @link https://php.net/manual/en/messageformatter.getpattern.php
* @param MessageFormatter $fmt
* @param $mf
* @return string The pattern string for this message formatter
*/
function msgfmt_get_pattern(MessageFormatter $fmt, $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale for which the formatter was created.
* @link https://php.net/manual/en/messageformatter.getlocale.php
* @param MessageFormatter $fmt
* @param $mf
* @return string The locale name
*/
function msgfmt_get_locale(MessageFormatter $fmt, $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error code from last operation
* @link https://php.net/manual/en/messageformatter.geterrorcode.php
* @param MessageFormatter $fmt
* @param $nf
* @return int The error code, one of UErrorCode values. Initial value is U_ZERO_ERROR.
*/
function msgfmt_get_error_code(MessageFormatter $fmt, $nf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error text from the last operation
* @link https://php.net/manual/en/messageformatter.geterrormessage.php
* @param MessageFormatter $fmt
* @param $coll
* @return string Description of the last error.
*/
function msgfmt_get_error_message(MessageFormatter $fmt, $coll) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a date formatter
* @link https://php.net/manual/en/intldateformatter.create.php
* @param string|null $locale <p>
* Locale to use when formatting or parsing.
* </p>
* @param int $datetype <p>
* Date type to use (<b>none</b>,
* <b>short</b>, <b>medium</b>,
* <b>long</b>, <b>full</b>).
* This is one of the
* IntlDateFormatter constants.
* </p>
* @param int $timetype <p>
* Time type to use (<b>none</b>,
* <b>short</b>, <b>medium</b>,
* <b>long</b>, <b>full</b>).
* This is one of the
* IntlDateFormatter constants.
* </p>
* @param string|null $timezone [optional] <p>
* Time zone ID, default is system default.
* </p>
* @param int|null $calendar [optional] <p>
* Calendar to use for formatting or parsing; default is Gregorian.
* This is one of the
* IntlDateFormatter calendar constants.
* </p>
* @param string $pattern [optional] <p>
* Optional pattern to use when formatting or parsing.
* Possible patterns are documented at http://userguide.icu-project.org/formatparse/datetime.
* </p>
* @return IntlDateFormatter
*/
function datefmt_create($locale, $datetype, $timetype, $timezone = null, $calendar = null, $pattern = '') { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the datetype used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getdatetype.php
* @param $mf
* @return int The current date type value of the formatter.
*/
function datefmt_get_datetype(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the timetype used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.gettimetype.php
* @param $mf
* @return int The current date type value of the formatter.
*/
function datefmt_get_timetype(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the calendar used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getcalendar.php
* @param $mf
* @return int The calendar being used by the formatter.
*/
function datefmt_get_calendar(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* sets the calendar used to the appropriate calendar, which must be
* @link https://php.net/manual/en/intldateformatter.setcalendar.php
* @param MessageFormatter $mf
* @param int $which <p>
* The calendar to use.
* Default is <b>IntlDateFormatter::GREGORIAN</b>.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function datefmt_set_calendar(MessageFormatter $mf, $which) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale used by formatter
* @link https://php.net/manual/en/intldateformatter.getlocale.php
* @param MessageFormatter $mf
* @param int $which [optional]
* @return string|false the locale of this formatter or 'false' if error
*/
function datefmt_get_locale(MessageFormatter $mf, $which = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the timezone-id used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.gettimezoneid.php
* @param $mf
* @return string ID string for the time zone used by this formatter.
*/
function datefmt_get_timezone_id(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 3.0.0)<br/>
* Get copy of formatter's calendar object
* @link https://secure.php.net/manual/en/intldateformatter.getcalendarobject.php
* @return IntlCalendar A copy of the internal calendar object used by this formatter.
*/
function datefmt_get_calendar_object() { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Get formatter's timezone
* @link https://secure.php.net/manual/en/intldateformatter.gettimezone.php
* @return IntlTimeZone|false The associated IntlTimeZone object or FALSE on failure.
*/
function datefmt_get_timezone() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sets the time zone to use
* @link https://php.net/manual/en/intldateformatter.settimezoneid.php
* @param MessageFormatter $mf
* @param string $zone <p>
* The time zone ID string of the time zone to use.
* If <b>NULL</b> or the empty string, the default time zone for the runtime is used.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
* @deprecated 5.5 https://secure.php.net/manual/en/migration55.deprecated.php
* @removed 7.0
*/
function datefmt_set_timezone_id(MessageFormatter $mf, $zone) { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Sets formatter's timezone
* @link https://php.net/manual/en/intldateformatter.settimezone.php
* @param MessageFormatter $mf
* @param mixed $zone <p>
* The timezone to use for this formatter. This can be specified in the
* following forms:
* <ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link "https://secure.php.net/manual/en/datetime.configuration.php#ini.date.timezone" date.timezone} or
* through the function {@link "https://secure.php.net/manual/en/function.date-default-timezone-set.php" date_default_timezone_set()} and as
* returned by {@link "https://secure.php.net/manual/en/function.date-default-timezone-get.php" date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link "https://secure.php.net/manual/en/class.intltimezone.php" IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link "https://secure.php.net/manual/en/class.datetimezone.php" DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link "https://secure.php.net/manual/en/language.types.string.php" string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function datefmt_set_timezone(MessageFormatter $mf, $zone) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the pattern used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getpattern.php
* @param $mf
* @return string The pattern string being used to format/parse.
*/
function datefmt_get_pattern(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the pattern used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.setpattern.php
* @param MessageFormatter $mf
* @param string $pattern <p>
* New pattern string to use.
* Possible patterns are documented at http://userguide.icu-project.org/formatparse/datetime.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
* Bad formatstrings are usually the cause of the failure.
*/
function datefmt_set_pattern(MessageFormatter $mf, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the lenient used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.islenient.php
* @param $mf
* @return bool <b>TRUE</b> if parser is lenient, <b>FALSE</b> if parser is strict. By default the parser is lenient.
*/
function datefmt_is_lenient(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the leniency of the parser
* @link https://php.net/manual/en/intldateformatter.setlenient.php
* @param MessageFormatter $mf
* @param bool $lenient <p>
* Sets whether the parser is lenient or not, default is <b>TRUE</b> (lenient).
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function datefmt_set_lenient(MessageFormatter $mf, $lenient) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format the date/time value as a string
* @link https://php.net/manual/en/intldateformatter.format.php
* @param MessageFormatter $mf
* @param mixed $value <p>
* Value to format. This may be a <b>DateTime</b> object,
* an integer representing a Unix timestamp value (seconds
* since epoch, UTC) or an array in the format output by
* <b>localtime</b>.
* </p>
* @return string|false The formatted string or, if an error occurred, <b>FALSE</b>.
*/
function datefmt_format(MessageFormatter $mf, $value) { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Formats an object
* @link https://secure.php.net/manual/en/intldateformatter.formatobject.php
* @param object $object <p>
* An object of type IntlCalendar or DateTime. The timezone information in the object will be used.
* </p>
* @param mixed $format [optional] <p>
* How to format the date/time. This can either be an {https://secure.php.net/manual/en/language.types.array.php array} with
* two elements (first the date style, then the time style, these being one
* of the constants <b>IntlDateFormatter::NONE</b>,
* <b>IntlDateFormatter::SHORT</b>,
* <b>IntlDateFormatter::MEDIUM</b>,
* <b>IntlDateFormatter::LONG</b>,
* <b>IntlDateFormatter::FULL</b>), a long with
* the value of one of these constants (in which case it will be used both
* for the time and the date) or a {@link https://secure.php.net/manual/en/language.types.string.php} with the format
* described in {@link http://www.icu-project.org/apiref/icu4c/classSimpleDateFormat.html#details the ICU documentation}
* documentation. If <b>NULL</b>, the default style will be used.
* </p>
* @param string|null $locale [optional] <p>
* The locale to use, or NULL to use the default one.</p>
* @return string|false The formatted string or, if an error occurred, <b>FALSE</b>.
*/
function datefmt_format_object($object, $format = null, $locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse string to a timestamp value
* @link https://php.net/manual/en/intldateformatter.parse.php
* @param MessageFormatter $mf
* @param string $value <p>
* string to convert to a time
* </p>
* @param int $position [optional] <p>
* Position at which to start the parsing in $value (zero-based).
* If no error occurs before $value is consumed, $parse_pos will contain -1
* otherwise it will contain the position at which parsing ended (and the error occurred).
* This variable will contain the end position if the parse fails.
* If $parse_pos > strlen($value), the parse fails immediately.
* </p>
* @return int timestamp parsed value
*/
function datefmt_parse(MessageFormatter $mf, $value, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse string to a field-based time value
* @link https://php.net/manual/en/intldateformatter.localtime.php
* @param MessageFormatter $mf
* @param string $value <p>
* string to convert to a time
* </p>
* @param int $position [optional] <p>
* Position at which to start the parsing in $value (zero-based).
* If no error occurs before $value is consumed, $parse_pos will contain -1
* otherwise it will contain the position at which parsing ended .
* If $parse_pos > strlen($value), the parse fails immediately.
* </p>
* @return array Localtime compatible array of integers : contains 24 hour clock value in tm_hour field
*/
function datefmt_localtime(MessageFormatter $mf, $value, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error code from last operation
* @link https://php.net/manual/en/intldateformatter.geterrorcode.php
* @param MessageFormatter $mf
* @return int The error code, one of UErrorCode values. Initial value is U_ZERO_ERROR.
*/
function datefmt_get_error_code(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error text from the last operation.
* @link https://php.net/manual/en/intldateformatter.geterrormessage.php
* @param MessageFormatter $mf
* @param $coll
* @return string Description of the last error.
*/
function datefmt_get_error_message(MessageFormatter $mf, $coll) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get string length in grapheme units
* @link https://php.net/manual/en/function.grapheme-strlen.php
* @param string $input <p>
* The string being measured for length. It must be a valid UTF-8 string.
* </p>
* @return int|false|null The length of the string on success, and 0 if the string is empty.
*/
function grapheme_strlen($input) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Find position (in grapheme units) of first occurrence of a string
* @link https://php.net/manual/en/function.grapheme-strpos.php
* @param string $haystack <p>
* The string to look in. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param int $offset [optional] <p>
* The optional $offset parameter allows you to specify where in $haystack to
* start searching as an offset in grapheme units (not bytes or characters).
* The position returned is still relative to the beginning of haystack
* regardless of the value of $offset.
* </p>
* @return int|false the position as an integer. If needle is not found, strpos() will return boolean FALSE.
*/
function grapheme_strpos($haystack, $needle, $offset = 0) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Find position (in grapheme units) of first occurrence of a case-insensitive string
* @link https://php.net/manual/en/function.grapheme-stripos.php
* @param string $haystack <p>
* The string to look in. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param int $offset [optional] <p>
* The optional $offset parameter allows you to specify where in haystack to
* start searching as an offset in grapheme units (not bytes or characters).
* The position returned is still relative to the beginning of haystack
* regardless of the value of $offset.
* </p>
* @return int|false the position as an integer. If needle is not found, grapheme_stripos() will return boolean FALSE.
*/
function grapheme_stripos($haystack, $needle, $offset = 0) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Find position (in grapheme units) of last occurrence of a string
* @link https://php.net/manual/en/function.grapheme-strrpos.php
* @param string $haystack <p>
* The string to look in. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param int $offset [optional] <p>
* The optional $offset parameter allows you to specify where in $haystack to
* start searching as an offset in grapheme units (not bytes or characters).
* The position returned is still relative to the beginning of haystack
* regardless of the value of $offset.
* </p>
* @return int|false the position as an integer. If needle is not found, grapheme_strrpos() will return boolean FALSE.
*/
function grapheme_strrpos($haystack, $needle, $offset = 0) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Find position (in grapheme units) of last occurrence of a case-insensitive string
* @link https://php.net/manual/en/function.grapheme-strripos.php
* @param string $haystack <p>
* The string to look in. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param int $offset [optional] <p>
* The optional $offset parameter allows you to specify where in $haystack to
* start searching as an offset in grapheme units (not bytes or characters).
* The position returned is still relative to the beginning of haystack
* regardless of the value of $offset.
* </p>
* @return int|false the position as an integer. If needle is not found, grapheme_strripos() will return boolean FALSE.
*/
function grapheme_strripos($haystack, $needle, $offset = 0) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Return part of a string
* @link https://php.net/manual/en/function.grapheme-substr.php
* @param string $string <p>
* The input string. Must be valid UTF-8.
* </p>
* @param int $start <p>
* Start position in default grapheme units.
* If $start is non-negative, the returned string will start at the
* $start'th position in $string, counting from zero. If $start is negative,
* the returned string will start at the $start'th grapheme unit from the
* end of string.
* </p>
* @param int $length [optional] <p>
* Length in grapheme units.
* If $length is given and is positive, the string returned will contain
* at most $length grapheme units beginning from $start (depending on the
* length of string). If $length is given and is negative, then
* that many grapheme units will be omitted from the end of string (after the
* start position has been calculated when a start is negative). If $start
* denotes a position beyond this truncation, <b>FALSE</b> will be returned.
* </p>
* @return string|false <p>the extracted part of $string,<br />
or <strong>FALSE</strong> if $length is negative and $start denotes a position beyond truncation $length,<br />
or also <strong>FALSE</strong> if $start denotes a position beyond $string length</p>
*/
function grapheme_substr($string, $start, $length = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns part of haystack string from the first occurrence of needle to the end of haystack.
* @link https://php.net/manual/en/function.grapheme-strstr.php
* @param string $haystack <p>
* The input string. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param bool $before_needle [optional] <p>
* If <b>TRUE</b>, grapheme_strstr() returns the part of the
* haystack before the first occurrence of the needle (excluding the needle).
* </p>
* @return string|false the portion of string, or FALSE if needle is not found.
*/
function grapheme_strstr($haystack, $needle, $before_needle = false) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns part of haystack string from the first occurrence of case-insensitive needle to the end of haystack.
* @link https://php.net/manual/en/function.grapheme-stristr.php
* @param string $haystack <p>
* The input string. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param bool $before_needle [optional] <p>
* If <b>TRUE</b>, grapheme_strstr() returns the part of the
* haystack before the first occurrence of the needle (excluding needle).
* </p>
* @return string|false the portion of $haystack, or FALSE if $needle is not found.
*/
function grapheme_stristr($haystack, $needle, $before_needle = false) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Function to extract a sequence of default grapheme clusters from a text buffer, which must be encoded in UTF-8.
* @link https://php.net/manual/en/function.grapheme-extract.php
* @param string $haystack <p>
* String to search.
* </p>
* @param int $size <p>
* Maximum number items - based on the $extract_type - to return.
* </p>
* @param int $extract_type [optional] <p>
* Defines the type of units referred to by the $size parameter:
* </p>
* <p>
* GRAPHEME_EXTR_COUNT (default) - $size is the number of default
* grapheme clusters to extract.
* GRAPHEME_EXTR_MAXBYTES - $size is the maximum number of bytes
* returned.
* GRAPHEME_EXTR_MAXCHARS - $size is the maximum number of UTF-8
* characters returned.
* </p>
* @param int $start [optional] <p>
* Starting position in $haystack in bytes - if given, it must be zero or a
* positive value that is less than or equal to the length of $haystack in
* bytes. If $start does not point to the first byte of a UTF-8
* character, the start position is moved to the next character boundary.
* </p>
* @param int $next [optional] <p>
* Reference to a value that will be set to the next starting position.
* When the call returns, this may point to the first byte position past the end of the string.
* </p>
* @return string|false A string starting at offset $start and ending on a default grapheme cluster
* boundary that conforms to the $size and $extract_type specified.
*/
function grapheme_extract($haystack, $size, $extract_type = null, $start = 0, &$next = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PHP 7, PECL intl &gt;= 1.0.2, PHP 7, PECL idn &gt;= 0.1)<br/>
* Convert domain name to IDNA ASCII form.
* @link https://php.net/manual/en/function.idn-to-ascii.php
* @param string $domain <p>
* Domain to convert. In PHP 5 must be UTF-8 encoded.
* If e.g. an ISO-8859-1 (aka Western Europe latin1) encoded string is
* passed it will be converted into an ACE encoded "xn--" string.
* It will not be the one you expected though!
* </p>
* @param int $options [optional] <p>
* Conversion options - combination of IDNA_* constants (except IDNA_ERROR_* constants).
* </p>
* @param int $variant [optional] <p>
* Either INTL_IDNA_VARIANT_2003 for IDNA 2003 or INTL_IDNA_VARIANT_UTS46 for UTS #46.
* </p>
* @param array $idna_info [optional] <p>
* This parameter can be used only if INTL_IDNA_VARIANT_UTS46 was used for variant.
* In that case, it will be filled with an array with the keys 'result',
* the possibly illegal result of the transformation, 'isTransitionalDifferent',
* a boolean indicating whether the usage of the transitional mechanisms of UTS #46
* either has or would have changed the result and 'errors',
* which is an int representing a bitset of the error constants IDNA_ERROR_*.
* </p>
* @return string|false The ACE encoded version of the domain name or <b>FALSE</b> on failure.
*/
function idn_to_ascii($domain, $options = 0, $variant = INTL_IDNA_VARIANT_2003, array &$idna_info = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PHP 7, PECL intl &gt;= 1.0.2, PHP 7, PECL idn &gt;= 0.1)<br/>
* Convert domain name from IDNA ASCII to Unicode.
* @link https://php.net/manual/en/function.idn-to-utf8.php
* @param string $domain <p>
* Domain to convert in IDNA ASCII-compatible format.
* The ASCII encoded domain name. Looks like "xn--..." if the it originally contained non-ASCII characters.
* </p>
* @param int $options [optional] <p>
* Conversion options - combination of IDNA_* constants (except IDNA_ERROR_* constants).
* </p>
* @param int $variant [optional] <p>
* Either INTL_IDNA_VARIANT_2003 for IDNA 2003 or INTL_IDNA_VARIANT_UTS46 for UTS #46.
* </p>
* @param int &$idna_info [optional] <p>
* This parameter can be used only if INTL_IDNA_VARIANT_UTS46 was used for variant.
* In that case, it will be filled with an array with the keys 'result',
* the possibly illegal result of the transformation, 'isTransitionalDifferent',
* a boolean indicating whether the usage of the transitional mechanisms of UTS #46
* either has or would have changed the result and 'errors',
* which is an int representing a bitset of the error constants IDNA_ERROR_*.
* </p>
* @return string|false The UTF-8 encoded version of the domain name or <b>FALSE</b> on failure.
* RFC 3490 4.2 states though "ToUnicode never fails. If any step fails, then the original input
* sequence is returned immediately in that step."
*/
function idn_to_utf8($domain, $options = 0, $variant = INTL_IDNA_VARIANT_2003, array &$idna_info) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a new IntlCalendar
* @link https://secure.php.net/manual/en/intlcalendar.createinstance.php
* @param mixed $timeZone [optional] <p> <p>
* The timezone to use.
* </p>
*
* <ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link https://secure.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone} or
* through the function {@link https://secure.php.net/manual/en/function.date-default-timezone-set.php date_default_timezone_set()} and as
* returned by {@link https://secure.php.net/manual/en/function.date-default-timezone-get.php date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link https://secure.php.net/manual/en/class.intltimezone.php IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link https://secure.php.net/manual/en/class.datetimezone.php DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link https://secure.php.net/manual/en/language.types.string.php string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw
* offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* </p>
* @param string $locale [optional] <p>
* A locale to use or <b>NULL</b> to use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.default-locale the default locale}.
* </p>
* @return IntlCalendar
* The created {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} instance or <b>NULL</b> on
* failure.
* @since 5.5
*/
function intlcal_create_instance($timeZone = null, $locale = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get set of locale keyword values
* @param string $key <p>
* The locale keyword for which relevant values are to be queried. Only
* <em>'calendar'</em> is supported.
* </p>
* @param string $locale <p>
* The locale onto which the keyword/value pair are to be appended.
* </p>
* @param bool $commonlyUsed
* <p>
* Whether to show only the values commonly used for the specified locale.
* </p>
* @return Iterator|false An iterator that yields strings with the locale keyword values or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_keyword_values_for_locale($key, $locale, $commonlyUsed) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get number representing the current time
* @link https://secure.php.net/manual/en/intlcalendar.getnow.php
* @return float A float representing a number of milliseconds since the epoch, not counting leap seconds.
* @since 5.5
*/
function intlcal_get_now() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get array of locales for which there is data
* @link https://secure.php.net/manual/en/intlcalendar.getavailablelocales.php
* @return array An array of strings, one for which locale.
* @since 5.5
*/
function intlcal_get_available_locales() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the value for a field
* @link https://secure.php.net/manual/en/intlcalendar.get.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int An integer with the value of the time field.
* @since 5.5
*/
function intl_get($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get time currently represented by the object
* @param IntlCalendar $calendar <p>The calendar whose time will be checked against this object's time.</p>
* @return float
* A {@link https://secure.php.net/manual/en/language.types.float.php float} representing the number of milliseconds elapsed since the
* reference time (1 Jan 1970 00:00:00 UTC).
* @since 5.5
*/
function intlcal_get_time($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the calendar time in milliseconds since the epoch
* @link https://secure.php.net/manual/en/intlcalendar.settime.php
* @param float $date <p>
* An instant represented by the number of number of milliseconds between
* such instant and the epoch, ignoring leap seconds.
* </p>
* @return bool
* Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_set_time($date) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Add a (signed) amount of time to a field
* @link https://secure.php.net/manual/en/intlcalendar.add.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param int $amount <p>The signed amount to add to the current field. If the amount is positive, the instant will be moved forward; if it is negative, the instant wil be moved into the past. The unit is implicit to the field type.
* For instance, hours for IntlCalendar::FIELD_HOUR_OF_DAY.</p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_add($calendar, $field, $amount) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the timezone used by this calendar
* @link https://secure.php.net/manual/en/intlcalendar.settimezone.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param mixed $timeZone <p>
* The new timezone to be used by this calendar. It can be specified in the
* following ways:
*
* </p><ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link https://secure.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone} or
* through the function {@link https://secure.php.net/manual/en/function.date-default-timezone-set.php date_default_timezone_set()} and as
* returned by {@link https://secure.php.net/manual/en/function.date-default-timezone-get.php date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link https://secure.php.net/manual/en/class.intltimezone.php IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link https://secure.php.net/manual/en/class.datetimezone.php DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link https://secure.php.net/manual/en/language.types.string.php string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw
* offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_set_time_zone($calendar, $timeZone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether this object's time is after that of the passed object
* https://secure.php.net/manual/en/intlcalendar.after.php
* @param IntlCalendar $calendarObject <p>
* The calendar object, on the procedural style interface.
* </p>
* @param IntlCalendar $calendar <p>The calendar whose time will be checked against this object's time.</p>
* @return bool
* Returns <b>TRUE</b> if this object's current time is after that of the
* <em>calendar</em> argument's time. Returns <b>FALSE</b> otherwise.
* Also returns <b>FALSE</b> on failure. You can use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or
* {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to detect error conditions.
* @since 5.5
*/
function intlcal_after(IntlCalendar $calendarObject, IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether this object's time is before that of the passed object
* @link https://secure.php.net/manual/en/intlcalendar.before.php
* @param IntlCalendar $calendarObject <p>
* The calendar object, on the procedural style interface.
* </p>
* @param IntlCalendar $calendar <p> The calendar whose time will be checked against this object's time.</p>
* @return bool
* Returns <b>TRUE</B> if this object's current time is before that of the
* <em>calendar</em> argument's time. Returns <b>FALSE</b> otherwise.
* Also returns <b>FALSE</b> on failure. You can use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or
* {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to detect error conditions.
* </p>
* @since 5.5
*/
function intlcal_before(IntlCalendar $calendarObject, IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set a time field or several common fields at once
* @link https://secure.php.net/manual/en/intlcalendar.set.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $year <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param int $month <p>
* The new value for <b>IntlCalendar::FIELD_MONTH</b>.
* </p>
* @param int $dayOfMonth [optional] <p>
* The new value for <b>IntlCalendar::FIELD_DAY_OF_MONTH</b>.
* The month sequence is zero-based, i.e., January is represented by 0,
* February by 1, ..., December is 11 and Undecember (if the calendar has
* it) is 12.
* </p>
* @param int $hour [optional]
* <p>
* The new value for <b>IntlCalendar::FIELD_HOUR_OF_DAY</b>.
* </p>
* @param int $minute [optional]
* <p>
* The new value for <b>IntlCalendar::FIELD_MINUTE</b>.
* </p>
* @param int $second [optional] <p>
* The new value for <b>IntlCalendar::FIELD_SECOND</b>.
*</p>
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_set($calendar, $year, $month, $dayOfMonth = null, $hour = null, $minute = null, $second = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Add value to field without carrying into more significant fields
* @link https://secure.php.net/manual/en/intlcalendar.roll.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>One of the
* {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time
* {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param mixed $amountOrUpOrDown <p>
* The (signed) amount to add to the field, <b>TRUE</b> for rolling up (adding
* <em>1</em>), or <b>FALSE</b> for rolling down (subtracting
* <em>1</em>).
* </p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_roll($calendar, $field, $amountOrUpOrDown) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Clear a field or all fields
* @link https://secure.php.net/manual/en/intlcalendar.clear.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field [optional] <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure. Failure can only occur is invalid arguments are provided.
* @since 5.5
*/
function intlcal_clear($calendar, $field = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Calculate difference between given time and this object's time
* @link https://secure.php.net/manual/en/intlcalendar.fielddifference.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param float $when <p>
* The time against which to compare the quantity represented by the
* <em>field</em>. For the result to be positive, the time
* given for this parameter must be ahead of the time of the object the
* method is being invoked on.
* </p>
* @param int $field <p>
* The field that represents the quantity being compared.
* </p>
*
* <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int Returns a (signed) difference of time in the unit associated with the
* specified field or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_field_difference($calendar, $when, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* The maximum value for a field, considering the object's current time
* @link https://secure.php.net/manual/en/intlcalendar.getactualmaximum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing the maximum value in the units associated
* with the given <em>field</em> or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_actual_maximum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* The minimum value for a field, considering the object's current time
* @link https://secure.php.net/manual/en/intlcalendar.getactualminimum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing the minimum value in the field's
* unit or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_actual_minimum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://secure.php.net/manual/en/intlcalendar.getdayofweektype.php
* Tell whether a day is a weekday, weekend or a day that has a transition between the two
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return int
* Returns one of the constants
* <b>IntlCalendar::DOW_TYPE_WEEKDAY</b>,
* <b>IntlCalendar::DOW_TYPE_WEEKEND</b>,
* <b>IntlCalendar::DOW_TYPE_WEEKEND_OFFSET</b> or
* <b>IntlCalendar::DOW_TYPE_WEEKEND_CEASE</b> or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_day_of_week_type($calendar, $dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the first day of the week for the calendar's locale
* @link https://secure.php.net/manual/en/intlcalendar.getfirstdayofweek.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b> or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_first_day_of_week($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the largest local minimum value for a field
* @link https://secure.php.net/manual/en/intlcalendar.getgreatestminimum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing a field value, in the field's
* unit, or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_greates_minimum($calendar, $field) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get data from the bundle
* @link https://php.net/manual/en/resourcebundle.get.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param string|int $index <p>
* Data index, must be string or integer.
* </p>
* @return mixed the data located at the index or <b>NULL</b> on error. Strings, integers and binary data strings
* are returned as corresponding PHP types, integer array is returned as PHP array. Complex types are
* returned as <b>ResourceBundle</b> object.
*/
function intlcal_get($calendar, $index) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the smallest local maximum for a field
* @link https://secure.php.net/manual/en/intlcalendar.getleastmaximum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.ph int} representing a field value in the field's
* unit or <b>FALSE</b> on failure.
* </p>
* @since 5.5
*/
function intlcal_get_least_maximum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the largest local minimum value for a field
* @link https://secure.php.net/manual/en/intlcalendar.getgreatestminimum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing a field value, in the field's
* unit, or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_greatest_minimum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the locale associated with the object
* @link https://secure.php.net/manual/en/intlcalendar.getlocale.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $localeType <p>
* Whether to fetch the actual locale (the locale from which the calendar
* data originates, with <b>Locale::ACTUAL_LOCALE</b>) or the
* valid locale, i.e., the most specific locale supported by ICU relatively
* to the requested locale see <b>Locale::VALID_LOCALE</b>.
* From the most general to the most specific, the locales are ordered in
* this fashion actual locale, valid locale, requested locale.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_locale($calendar, $localeType) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global maximum value for a field
* @link https://secure.php.net/manual/en/intlcalendar.getmaximum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
* @since 5.5
*/
function intcal_get_maximum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://secure.php.net/manual/en/intlcalendar.getminimaldaysinfirstweek.php
* Get minimal number of days the first week in a year or month can have
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int
* An {@link https://secure.php.net/manual/en/language.types.integer.php int} representing a number of days or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_minimal_days_in_first_week($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global minimum value for a field
* @link https://secure.php.net/manual/en/intlcalendar.getminimum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An int representing a value for the given field in the field's unit or FALSE on failure.
* @since 5.5
*/
function intlcal_get_minimum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the object's timezone
* @link https://secure.php.net/manual/en/intlcalendar.gettimezone.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return IntlTimeZone
* An {@link https://secure.php.net/manual/en/class.intltimezone.php IntlTimeZone} object corresponding to the one used
* internally in this object.
* @since 5.5
*/
function intlcal_get_time_zone($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the calendar type
* @link https://secure.php.net/manual/en/intlcalendar.gettype.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return string
* A {@link https://secure.php.net/manual/en/language.types.string.php string} representing the calendar type, such as
* <em>'gregorian'</em>, <em>'islamic'</em>, etc.
* @since 5.5
*/
function intlcal_get_type($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get time of the day at which weekend begins or ends
* @link https://secure.php.net/manual/en/intlcalendar.getweekendtransition.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param string $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return int
* The number of milliseconds into the day at which the the weekend begins or
* ends or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_weekend_transition($calendar, $dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether the object's time is in Daylight Savings Time
* @link https://secure.php.net/manual/en/intlcalendar.indaylighttime.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return bool
* Returns <b>TRUE</b> if the date is in Daylight Savings Time, <b>FALSE</b> otherwise.
* The value <b>FALSE</b> may also be returned on failure, for instance after
* specifying invalid field values on non-lenient mode; use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or query
* {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to disambiguate.
* @since 5.5
*/
function intlcal_in_daylight_time($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether date/time interpretation is in lenient mode
* @link https://secure.php.net/manual/en/intlcalendar.islenient.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return bool
* A {@link https://secure.php.net/manual/en/language.types.boolean.php bool} representing whether the calendar is set to lenient mode.
* @since 5.5
*/
function intlcal_is_lenient($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether a field is set
* @link https://secure.php.net/manual/en/intlcalendar.isset.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return bool Assuming there are no argument errors, returns <b>TRUE</b> iif the field is set.
* @since 5.5
*/
function intlcal_is_set($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global maximum value for a field
* @link https://secure.php.net/manual/en/intlcalendar.getmaximum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://secure.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_maximum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether another calendar is equal but for a different time
* @link https://secure.php.net/manual/en/intlcalendar.isequivalentto.php
* @param IntlCalendar $calendarObject <p>
* The calendar object, on the procedural style interface.
* </p>
* @param IntlCalendar $calendar The other calendar against which the comparison is to be made.
* @return bool
* Assuming there are no argument errors, returns <b>TRUE</b> iif the calendars are equivalent except possibly for their set time.
* @since 5.5
*/
function intlcal_is_equivalent_to(IntlCalendar $calendarObject, IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether a certain date/time is in the weekend
* @link https://secure.php.net/manual/en/intlcalendar.isweekend.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param float|null $date [optional] <p>
* An optional timestamp representing the number of milliseconds since the
* epoch, excluding leap seconds. If <b>NULL</b>, this object's current time is
* used instead.
* </p>
* @return bool
* <p> A {@link https://secure.php.net/manual/en/language.types.boolean.php bool} indicating whether the given or this object's time occurs
* in a weekend.
* </p>
* <p>
* The value <b>FALSE</b> may also be returned on failure, for instance after giving
* a date out of bounds on non-lenient mode; use {@link https://secure.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or query
* {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to disambiguate.</p>
* @since 5.5
*/
function intlcal_is_weekend($calendar, $date = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the day on which the week is deemed to start
* @link https://secure.php.net/manual/en/intlcalendar.setfirstdayofweek.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return bool Returns TRUE on success. Failure can only happen due to invalid parameters.
* @since 5.5
*/
function intlcal_set_first_day_of_week($calendar, $dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set whether date/time interpretation is to be lenient
* @link https://secure.php.net/manual/en/intlcalendar.setlenient.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param string $isLenient <p>
* Use <b>TRUE</b> to activate the lenient mode; <b>FALSE</b> otherwise.
* </p>
* @return bool Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
* @since 5.5
*/
function intlcal_set_lenient($calendar, $isLenient) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get behavior for handling repeating wall time
* @link https://secure.php.net/manual/en/intlcalendar.getrepeatedwalltimeoption.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b> or
* <b>IntlCalendar::WALLTIME_LAST</b>.
* @since 5.5
*/
function intlcal_get_repeated_wall_time_option($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Compare time of two IntlCalendar objects for equality
* @link https://secure.php.net/manual/en/intlcalendar.equals.php
* @param IntlCalendar $calendarObject <p>
* The calendar object, on the procedural style interface.
* </p>
* @param IntlCalendar $calendar
* @return bool <p>
* Returns <b>TRUE</b> if the current time of both this and the passed in
* {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} object are the same, or <b>FALSE</b>
* otherwise. The value <b>FALSE</b> can also be returned on failure. This can only
* happen if bad arguments are passed in. In any case, the two cases can be
* distinguished by calling {@link https://secure.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()}.
* </p>
* @since 5.5
*/
function intlcal_equals($calendarObject, $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get behavior for handling skipped wall time
* @link https://secure.php.net/manual/en/intlcalendar.getskippedwalltimeoption.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b>,
* <b>IntlCalendar::WALLTIME_LAST</b> or
* <b>IntlCalendar::WALLTIME_NEXT_VALID</b>.
* @since 5.5
*/
function intlcal_get_skipped_wall_time_option($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set behavior for handling repeating wall times at negative timezone offset transitions
* @link https://secure.php.net/manual/en/intlcalendar.setrepeatedwalltimeoption.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $wallTimeOption <p>
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b> or
* <b>IntlCalendar::WALLTIME_LAST</b>.
* </p>
* @return bool
* Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
* @since 5.5
*/
function intlcal_set_repeated_wall_time_option($calendar, $wallTimeOption) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set behavior for handling skipped wall times at positive timezone offset transitions
* @link https://secure.php.net/manual/en/intlcalendar.setskippedwalltimeoption.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $wallTimeOption <p>
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b>,
* <b>IntlCalendar::WALLTIME_LAST</b> or
* <b>IntlCalendar::WALLTIME_NEXT_VALID</b>.
* </p>
* @return bool
* <p>
* Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
* </p>
* @since 5.5
*/
function intlcal_set_skipped_wall_time_option($calendar, $wallTimeOption) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a2)<br/>
* Create an IntlCalendar from a DateTime object or string
* @link https://secure.php.net/manual/en/intlcalendar.fromdatetime.php
* @param mixed $dateTime <p>
* A {@link https://secure.php.net/manual/en/class.datetime.php DateTime} object or a {@link https://secure.php.net/manual/en/language.types.string.php string} that
* can be passed to {@link https://secure.php.net/manual/en/datetime.construct.php DateTime::__construct()}.
* </p>
* @return IntlCalendar
* The created {@link https://secure.php.net/manual/en/class.intlcalendar.php IntlCalendar} object or <b>NULL</b> in case of
* failure. If a {@link https://secure.php.net/manual/en/language.types.string.php string} is passed, any exception that occurs
* inside the {@link https://secure.php.net/manual/en/class.datetime.php DateTime} constructor is propagated.
* @since 5.5
*/
function intlcal_from_date_time($dateTime) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a2)<br/>
* Convert an IntlCalendar into a DateTime object
* @link https://secure.php.net/manual/en/intlcalendar.todatetime.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return DateTime|false
* A {@link https://secure.php.net/manual/en/class.datetime.php DateTime} object with the same timezone as this
* object (though using PHP's database instead of ICU's) and the same time,
* except for the smaller precision (second precision instead of millisecond).
* Returns <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_to_date_time($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error code on the object
* @link https://secure.php.net/manual/en/intlcalendar.geterrorcode.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int An ICU error code indicating either success, failure or a warning.
* @since 5.5
*/
function intlcal_get_error_code($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error message on the object
* @link https://secure.php.net/manual/en/intlcalendar.geterrormessage.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return string The error message associated with last error that occurred in a function call on this object, or a string indicating the non-existance of an error.
* @since 5.5
*/
function intlcal_get_error_message($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the number of IDs in the equivalency group that includes the given ID
* @link https://secure.php.net/manual/en/intltimezone.countequivalentids.php
* @param string $zoneId
* @return int
* @since 5.5
*/
function intltz_count_equivalent_ids($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a new copy of the default timezone for this host
* @link https://secure.php.net/manual/en/intltimezone.createdefault.php
* @return IntlTimeZone
* @since 5.5
*/
function intlz_create_default() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://secure.php.net/manual/en/intltimezone.createenumeration.php
* @param mixed $countryOrRawOffset [optional]
* @return IntlIterator
* @since 5.5
*/
function intltz_create_enumeration($countryOrRawOffset) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://secure.php.net/manual/en/intltimezone.createtimezone.php
* @param string $zoneId
* @return IntlTimeZone
* @since 5.5
*/
function intltz_create_time_zone($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://secure.php.net/manual/en/intltimezone.fromdatetimezone.php
* @param DateTimeZone $zoneId
* @return IntlTimeZone
* @since 5.5
*/
function intltz_from_date_time_zone($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the canonical system timezone ID or the normalized custom time zone ID for the given time zone ID
* @link https://secure.php.net/manual/en/intltimezone.getcanonicalid.php
* @param string $zoneId
* @param bool $isSystemID [optional]
* @return string
* @since 5.5
*/
function intltz_get_canonical_id($zoneId, &$isSystemID) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get a name of this time zone suitable for presentation to the user
* @param IntlTimeZone $obj - <p>
* The time zone object, on the procedural style interface.
* </p>
* @param bool $isDaylight [optional]
* @param int $style [optional]
* @param string $locale [optional]
* @return string
* @since 5.5
*/
function intltz_get_display_name($obj, $isDaylight, $style, $locale) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the amount of time to be added to local standard time to get local wall clock time
* @param IntlTimeZone $obj - <p>
* The time zone object, on the procedural style interface.
* </p>
* @link https://secure.php.net/manual/en/intltimezone.getequivalentid.php
* @return int
* @since 5.5
*/
function intltz_get_dst_savings($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get an ID in the equivalency group that includes the given ID
* @link https://secure.php.net/manual/en/intltimezone.getequivalentid.php
* @param string $zoneId
* @param int $index
* @return string
* @since 5.5
*/
function intltz_get_equivalent_id($zoneId, $index) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error code on the object
* @link https://secure.php.net/manual/en/intltimezone.geterrorcode.php
* @param IntlTimeZone $obj - <p>
* The time zone object, on the procedural style interface.
* </p>
* @return int
* @since 5.5
*/
function intltz_get_error_code($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error message on the object
* @link https://secure.php.net/manual/en/intltimezone.geterrormessage.php
* @param IntlTimeZone $obj - <p>
* The time zone object, on the procedural style interface.
* </p>
* @return string
* @since 5.5
*/
function intltz_get_error_message($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create GMT (UTC) timezone
* @link https://secure.php.net/manual/en/intltimezone.getgmt.php
* @return IntlTimeZone
* @since 5.5
*/
function intltz_getGMT() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get timezone ID
* @link https://secure.php.net/manual/en/intltimezone.getid.php
* @param IntlTimeZone $obj
* @return string
* @since 5.5
*/
function intltz_get_id($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the time zone raw and GMT offset for the given moment in time
* @link https://secure.php.net/manual/en/intltimezone.getoffset.php
* @param IntlTimeZone $obj
* @param float $date
* @param bool $local
* @param int $rawOffset
* @param int $dstOffset
* @return int
* @since 5.5
*/
function intltz_get_offset($obj, $date, $local, &$rawOffset, &$dstOffset) { }
/**
* Get the raw GMT offset (before taking daylight savings time into account
* @link https://secure.php.net/manual/en/intltimezone.getrawoffset.php
* @param IntlTimeZone $obj
* @return int
*/
function intltz_get_raw_offset($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the timezone data version currently used by ICU
* @link https://secure.php.net/manual/en/intltimezone.gettzdataversion.php
* @param IntlTimeZone $obj
* @return string
* @since 5.5
*/
function intltz_get_tz_data_version($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Check if this zone has the same rules and offset as another zone
* @link https://secure.php.net/manual/en/intltimezone.hassamerules.php
* @param IntlTimeZone $obj
* @param IntlTimeZone $otherTimeZone
* @return bool
* @since 5.5
*/
function intltz_has_same_rules($obj, $otherTimeZone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Convert to DateTimeZone object
* @link https://secure.php.net/manual/ru/intltimezone.todatetimezone.php
* @param $obj
* @return DateTimeZone
* @since 5.5
*/
function intltz_to_date_time_zone($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Check if this time zone uses daylight savings time
* @link https://secure.php.net/manual/ru/intltimezone.usedaylighttime.php
* @param $obj
* @return bool
* @since 5.5
*/
function intltz_use_daylight_time($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @param mixed $timeZone
* @param string $locale
* @return IntlGregorianCalendar
* @since 5.5
*/
function intlgregcal_create_instance($timeZone = null, $locale = null) { }
/**
* @param IntlGregorianCalendar $obj
* @param double $change
*
*/
function intlgregcal_set_gregorian_change($obj, $change) { }
/**
* @param IntlGregorianCalendar $obj
* @return double $change
*/
function intlgregcal_get_gregorian_change($obj) { }
/**
* @param int $year
* @return bool
*/
function intlgregcal_is_leap_year($year) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Create a resource bundle
* @link https://php.net/manual/en/resourcebundle.create.php
* @param string $locale <p>
* Locale for which the resources should be loaded (locale name, e.g. en_CA).
* </p>
* @param string $bundlename <p>
* The directory where the data is stored or the name of the .dat file.
* </p>
* @param bool $fallback [optional] <p>
* Whether locale should match exactly or fallback to parent locale is allowed.
* </p>
* @return ResourceBundle|false <b>ResourceBundle</b> object or <b>FALSE</b> on error.
*/
function resourcebundle_create($locale, $bundlename, $fallback = null) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get data from the bundle
* @link https://php.net/manual/en/resourcebundle.get.php
* @param ResourceBundle $r
* @param string|int $index <p>
* Data index, must be string or integer.
* </p>
* @return mixed the data located at the index or <b>NULL</b> on error. Strings, integers and binary data strings
* are returned as corresponding PHP types, integer array is returned as PHP array. Complex types are
* returned as <b>ResourceBundle</b> object.
*/
function resourcebundle_get(ResourceBundle $r, $index) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get number of elements in the bundle
* @link https://php.net/manual/en/resourcebundle.count.php
* @param ResourceBundle $r
* @param $bundle
* @return int number of elements in the bundle.
*/
function resourcebundle_count(ResourceBundle $r, $bundle) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get supported locales
* @link https://php.net/manual/en/resourcebundle.locales.php
* @param string $bundlename <p>
* Path of ResourceBundle for which to get available locales, or
* empty string for default locales list.
* </p>
* @return array the list of locales supported by the bundle.
*/
function resourcebundle_locales($bundlename) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get bundle's last error code.
* @link https://php.net/manual/en/resourcebundle.geterrorcode.php
* @param $bundle
* @return int error code from last bundle object call.
*/
function resourcebundle_get_error_code(ResourceBundle $bundle) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get bundle's last error message.
* @link https://php.net/manual/en/resourcebundle.geterrormessage.php
* @param $bundle
* @return string error message from last bundle object's call.
*/
function resourcebundle_get_error_message(ResourceBundle $bundle) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create a transliterator
* @link https://php.net/manual/en/transliterator.create.php
* @param string $id <p>
* The id.
* </p>
* @param int $direction [optional] <p>
* The direction, defaults to
* >Transliterator::FORWARD.
* May also be set to
* Transliterator::REVERSE.
* </p>
* @return Transliterator|null a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure.
* @since 5.4
*/
function transliterator_create($id, $direction = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create transliterator from rules
* @link https://php.net/manual/en/transliterator.createfromrules.php
* @param string $rules <p>
* The rules.
* </p>
* @param string $direction [optional] <p>
* The direction, defaults to
* >Transliterator::FORWARD.
* May also be set to
* Transliterator::REVERSE.
* </p>
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure.
* @since 5.4
*/
function transliterator_create_from_rules($rules, $direction = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get transliterator IDs
* @link https://php.net/manual/en/transliterator.listids.php
* @return array An array of registered transliterator IDs on success,
* or <b>FALSE</b> on failure.
* @since 5.4
*/
function transliterator_list_ids() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create an inverse transliterator
* @link https://php.net/manual/en/transliterator.createinverse.php
* @param Transliterator $orig_trans
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure
* @since 5.4
*/
function transliterator_create_inverse(Transliterator $orig_trans) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Transliterate a string
* @link https://php.net/manual/en/transliterator.transliterate.php
* @param Transliterator|string $transliterator
* @param string $subject <p>
* The string to be transformed.
* </p>
* @param int $start [optional] <p>
* The start index (in UTF-16 code units) from which the string will start
* to be transformed, inclusive. Indexing starts at 0. The text before will
* be left as is.
* </p>
* @param int $end [optional] <p>
* The end index (in UTF-16 code units) until which the string will be
* transformed, exclusive. Indexing starts at 0. The text after will be
* left as is.
* </p>
* @return string|false The transfomed string on success, or <b>FALSE</b> on failure.
* @since 5.4
*/
function transliterator_transliterate($transliterator, $subject, $start = null, $end = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get last error code
* @link https://php.net/manual/en/transliterator.geterrorcode.php
* @param Transliterator $trans
* @return int The error code on success,
* or <b>FALSE</b> if none exists, or on failure.
* @since 5.4
*/
function transliterator_get_error_code(Transliterator $trans) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get last error message
* @link https://php.net/manual/en/transliterator.geterrormessage.php
* @param Transliterator $trans
* @return string The error code on success,
* or <b>FALSE</b> if none exists, or on failure.
* @since 5.4
*/
function transliterator_get_error_message(Transliterator $trans) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the last error code
* @link https://php.net/manual/en/function.intl-get-error-code.php
* @return int Error code returned by the last API function call.
*/
function intl_get_error_code() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get description of the last error
* @link https://php.net/manual/en/function.intl-get-error-message.php
* @return string Description of an error occurred in the last API function call.
*/
function intl_get_error_message() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Check whether the given error code indicates failure
* @link https://php.net/manual/en/function.intl-is-failure.php
* @param int $error_code <p>
* is a value that returned by functions:
* <b>intl_get_error_code</b>,
* <b>collator_get_error_code</b> .
* </p>
* @return bool <b>TRUE</b> if it the code indicates some failure, and <b>FALSE</b>
* in case of success or a warning.
*/
function intl_is_failure($error_code) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get symbolic name for a given error code
* @link https://php.net/manual/en/function.intl-error-name.php
* @param int $error_code <p>
* ICU error code.
* </p>
* @return string The returned string will be the same as the name of the error code
* constant.
*/
function intl_error_name($error_code) { }
/**
* Gets the Decomposition_Mapping property for the given UTF-8 encoded code point
*
* @link https://www.php.net/manual/en/normalizer.getrawdecomposition.php
*
* @param string $input
* @return string|null
*
* @since 7.3
*/
function normalizer_get_raw_decomposition($input) { }
/**
* @since 5.5
*/
function intltz_create_default() { }
/**
* @since 5.5
*/
function intltz_get_gmt() { }
/**
* @since 5.5
*/
function intltz_get_unknown() { }
/**
* @since 5.5
*/
function intltz_create_time_zone_id_enumeration($zoneType, $region = null, $rawOffset = null) { }
/**
* @since 5.5
*/
function intltz_get_region($zoneId) { }
/**
* Set minimal number of days the first week in a year or month can have
*
* @link https://www.php.net/manual/en/intlcalendar.setminimaldaysinfirstweek.php
*
* @param IntlCalendar $calendar
* @param int $numberOfDays
* @return bool
*
* @since 5.5.1
*/
function intlcal_set_minimal_days_in_first_week(IntlCalendar $calendar, $numberOfDays) { }
/**
* Limit on locale length, set to 80 in PHP code. Locale names longer
* than this limit will not be accepted.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('INTL_MAX_LOCALE_LEN', 80);
define ('INTL_ICU_VERSION', "4.8.1.1");
define ('INTL_ICU_DATA_VERSION', "4.8.1");
define ('ULOC_ACTUAL_LOCALE', 0);
define ('ULOC_VALID_LOCALE', 1);
define ('GRAPHEME_EXTR_COUNT', 0);
define ('GRAPHEME_EXTR_MAXBYTES', 1);
define ('GRAPHEME_EXTR_MAXCHARS', 2);
define ('U_USING_FALLBACK_WARNING', -128);
define ('U_ERROR_WARNING_START', -128);
define ('U_USING_DEFAULT_WARNING', -127);
define ('U_SAFECLONE_ALLOCATED_WARNING', -126);
define ('U_STATE_OLD_WARNING', -125);
define ('U_STRING_NOT_TERMINATED_WARNING', -124);
define ('U_SORT_KEY_TOO_SHORT_WARNING', -123);
define ('U_AMBIGUOUS_ALIAS_WARNING', -122);
define ('U_DIFFERENT_UCA_VERSION', -121);
define ('U_ERROR_WARNING_LIMIT', -119);
define ('U_ZERO_ERROR', 0);
define ('U_ILLEGAL_ARGUMENT_ERROR', 1);
define ('U_MISSING_RESOURCE_ERROR', 2);
define ('U_INVALID_FORMAT_ERROR', 3);
define ('U_FILE_ACCESS_ERROR', 4);
define ('U_INTERNAL_PROGRAM_ERROR', 5);
define ('U_MESSAGE_PARSE_ERROR', 6);
define ('U_MEMORY_ALLOCATION_ERROR', 7);
define ('U_INDEX_OUTOFBOUNDS_ERROR', 8);
define ('U_PARSE_ERROR', 9);
define ('U_INVALID_CHAR_FOUND', 10);
define ('U_TRUNCATED_CHAR_FOUND', 11);
define ('U_ILLEGAL_CHAR_FOUND', 12);
define ('U_INVALID_TABLE_FORMAT', 13);
define ('U_INVALID_TABLE_FILE', 14);
define ('U_BUFFER_OVERFLOW_ERROR', 15);
define ('U_UNSUPPORTED_ERROR', 16);
define ('U_RESOURCE_TYPE_MISMATCH', 17);
define ('U_ILLEGAL_ESCAPE_SEQUENCE', 18);
define ('U_UNSUPPORTED_ESCAPE_SEQUENCE', 19);
define ('U_NO_SPACE_AVAILABLE', 20);
define ('U_CE_NOT_FOUND_ERROR', 21);
define ('U_PRIMARY_TOO_LONG_ERROR', 22);
define ('U_STATE_TOO_OLD_ERROR', 23);
define ('U_TOO_MANY_ALIASES_ERROR', 24);
define ('U_ENUM_OUT_OF_SYNC_ERROR', 25);
define ('U_INVARIANT_CONVERSION_ERROR', 26);
define ('U_INVALID_STATE_ERROR', 27);
define ('U_COLLATOR_VERSION_MISMATCH', 28);
define ('U_USELESS_COLLATOR_ERROR', 29);
define ('U_NO_WRITE_PERMISSION', 30);
define ('U_STANDARD_ERROR_LIMIT', 31);
define ('U_BAD_VARIABLE_DEFINITION', 65536);
define ('U_PARSE_ERROR_START', 65536);
define ('U_MALFORMED_RULE', 65537);
define ('U_MALFORMED_SET', 65538);
define ('U_MALFORMED_SYMBOL_REFERENCE', 65539);
define ('U_MALFORMED_UNICODE_ESCAPE', 65540);
define ('U_MALFORMED_VARIABLE_DEFINITION', 65541);
define ('U_MALFORMED_VARIABLE_REFERENCE', 65542);
define ('U_MISMATCHED_SEGMENT_DELIMITERS', 65543);
define ('U_MISPLACED_ANCHOR_START', 65544);
define ('U_MISPLACED_CURSOR_OFFSET', 65545);
define ('U_MISPLACED_QUANTIFIER', 65546);
define ('U_MISSING_OPERATOR', 65547);
define ('U_MISSING_SEGMENT_CLOSE', 65548);
define ('U_MULTIPLE_ANTE_CONTEXTS', 65549);
define ('U_MULTIPLE_CURSORS', 65550);
define ('U_MULTIPLE_POST_CONTEXTS', 65551);
define ('U_TRAILING_BACKSLASH', 65552);
define ('U_UNDEFINED_SEGMENT_REFERENCE', 65553);
define ('U_UNDEFINED_VARIABLE', 65554);
define ('U_UNQUOTED_SPECIAL', 65555);
define ('U_UNTERMINATED_QUOTE', 65556);
define ('U_RULE_MASK_ERROR', 65557);
define ('U_MISPLACED_COMPOUND_FILTER', 65558);
define ('U_MULTIPLE_COMPOUND_FILTERS', 65559);
define ('U_INVALID_RBT_SYNTAX', 65560);
define ('U_INVALID_PROPERTY_PATTERN', 65561);
define ('U_MALFORMED_PRAGMA', 65562);
define ('U_UNCLOSED_SEGMENT', 65563);
define ('U_ILLEGAL_CHAR_IN_SEGMENT', 65564);
define ('U_VARIABLE_RANGE_EXHAUSTED', 65565);
define ('U_VARIABLE_RANGE_OVERLAP', 65566);
define ('U_ILLEGAL_CHARACTER', 65567);
define ('U_INTERNAL_TRANSLITERATOR_ERROR', 65568);
define ('U_INVALID_ID', 65569);
define ('U_INVALID_FUNCTION', 65570);
define ('U_PARSE_ERROR_LIMIT', 65571);
define ('U_UNEXPECTED_TOKEN', 65792);
define ('U_FMT_PARSE_ERROR_START', 65792);
define ('U_MULTIPLE_DECIMAL_SEPARATORS', 65793);
define ('U_MULTIPLE_DECIMAL_SEPERATORS', 65793);
define ('U_MULTIPLE_EXPONENTIAL_SYMBOLS', 65794);
define ('U_MALFORMED_EXPONENTIAL_PATTERN', 65795);
define ('U_MULTIPLE_PERCENT_SYMBOLS', 65796);
define ('U_MULTIPLE_PERMILL_SYMBOLS', 65797);
define ('U_MULTIPLE_PAD_SPECIFIERS', 65798);
define ('U_PATTERN_SYNTAX_ERROR', 65799);
define ('U_ILLEGAL_PAD_POSITION', 65800);
define ('U_UNMATCHED_BRACES', 65801);
define ('U_UNSUPPORTED_PROPERTY', 65802);
define ('U_UNSUPPORTED_ATTRIBUTE', 65803);
define ('U_FMT_PARSE_ERROR_LIMIT', 65810);
define ('U_BRK_INTERNAL_ERROR', 66048);
define ('U_BRK_ERROR_START', 66048);
define ('U_BRK_HEX_DIGITS_EXPECTED', 66049);
define ('U_BRK_SEMICOLON_EXPECTED', 66050);
define ('U_BRK_RULE_SYNTAX', 66051);
define ('U_BRK_UNCLOSED_SET', 66052);
define ('U_BRK_ASSIGN_ERROR', 66053);
define ('U_BRK_VARIABLE_REDFINITION', 66054);
define ('U_BRK_MISMATCHED_PAREN', 66055);
define ('U_BRK_NEW_LINE_IN_QUOTED_STRING', 66056);
define ('U_BRK_UNDEFINED_VARIABLE', 66057);
define ('U_BRK_INIT_ERROR', 66058);
define ('U_BRK_RULE_EMPTY_SET', 66059);
define ('U_BRK_UNRECOGNIZED_OPTION', 66060);
define ('U_BRK_MALFORMED_RULE_TAG', 66061);
define ('U_BRK_ERROR_LIMIT', 66062);
define ('U_REGEX_INTERNAL_ERROR', 66304);
define ('U_REGEX_ERROR_START', 66304);
define ('U_REGEX_RULE_SYNTAX', 66305);
define ('U_REGEX_INVALID_STATE', 66306);
define ('U_REGEX_BAD_ESCAPE_SEQUENCE', 66307);
define ('U_REGEX_PROPERTY_SYNTAX', 66308);
define ('U_REGEX_UNIMPLEMENTED', 66309);
define ('U_REGEX_MISMATCHED_PAREN', 66310);
define ('U_REGEX_NUMBER_TOO_BIG', 66311);
define ('U_REGEX_BAD_INTERVAL', 66312);
define ('U_REGEX_MAX_LT_MIN', 66313);
define ('U_REGEX_INVALID_BACK_REF', 66314);
define ('U_REGEX_INVALID_FLAG', 66315);
define ('U_REGEX_LOOK_BEHIND_LIMIT', 66316);
define ('U_REGEX_SET_CONTAINS_STRING', 66317);
define ('U_REGEX_ERROR_LIMIT', 66324);
define ('U_IDNA_PROHIBITED_ERROR', 66560);
define ('U_IDNA_ERROR_START', 66560);
define ('U_IDNA_UNASSIGNED_ERROR', 66561);
define ('U_IDNA_CHECK_BIDI_ERROR', 66562);
define ('U_IDNA_STD3_ASCII_RULES_ERROR', 66563);
define ('U_IDNA_ACE_PREFIX_ERROR', 66564);
define ('U_IDNA_VERIFICATION_ERROR', 66565);
define ('U_IDNA_LABEL_TOO_LONG_ERROR', 66566);
define ('U_IDNA_ZERO_LENGTH_LABEL_ERROR', 66567);
define ('U_IDNA_DOMAIN_NAME_TOO_LONG_ERROR', 66568);
define ('U_IDNA_ERROR_LIMIT', 66569);
define ('U_STRINGPREP_PROHIBITED_ERROR', 66560);
define ('U_STRINGPREP_UNASSIGNED_ERROR', 66561);
define ('U_STRINGPREP_CHECK_BIDI_ERROR', 66562);
define ('U_ERROR_LIMIT', 66818);
/**
* Prohibit processing of unassigned codepoints in the input for IDN
* functions and do not check if the input conforms to domain name ASCII rules.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_DEFAULT', 0);
/**
* Allow processing of unassigned codepoints in the input for IDN functions.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_ALLOW_UNASSIGNED', 1);
/**
* Check if the input for IDN functions conforms to domain name ASCII rules.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_USE_STD3_RULES', 2);
/**
* Check whether the input conforms to the BiDi rules.
* Ignored by the IDNA2003 implementation, which always performs this check.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_CHECK_BIDI', 4);
/**
* Check whether the input conforms to the CONTEXTJ rules.
* Ignored by the IDNA2003 implementation, as this check is new in IDNA2008.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_CHECK_CONTEXTJ', 8);
/**
* Option for nontransitional processing in
* <b>idn_to_ascii</b>. Transitional processing is activated
* by default. This option is ignored by the IDNA2003 implementation.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_NONTRANSITIONAL_TO_ASCII', 16);
/**
* Option for nontransitional processing in
* <b>idn_to_utf8</b>. Transitional processing is activated
* by default. This option is ignored by the IDNA2003 implementation.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_NONTRANSITIONAL_TO_UNICODE', 32);
/**
* Use IDNA 2003 algorithm in {@see idn_to_utf8} and
* {@see idn_to_ascii}. This is the default.
* @link https://php.net/manual/en/intl.constants.php
* @deprecated 7.2 Use {@see INTL_IDNA_VARIANT_UTS46} instead.
* @removed 8.0
*/
define ('INTL_IDNA_VARIANT_2003', 0);
/**
* Use UTS #46 algorithm in <b>idn_to_utf8</b> and
* <b>idn_to_ascii</b>.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('INTL_IDNA_VARIANT_UTS46', 1);
/**
* Errors reported in a bitset returned by the UTS #46 algorithm in
* <b>idn_to_utf8</b> and
* <b>idn_to_ascii</b>.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_ERROR_EMPTY_LABEL', 1);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_LABEL_TOO_LONG', 2);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_DOMAIN_NAME_TOO_LONG', 4);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_LEADING_HYPHEN', 8);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_TRAILING_HYPHEN', 16);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_HYPHEN_3_4', 32);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_LEADING_COMBINING_MARK', 64);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_DISALLOWED', 128);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_PUNYCODE', 256);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_LABEL_HAS_DOT', 512);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_INVALID_ACE_LABEL', 1024);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_BIDI', 2048);
/**
* @link https://secure.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_CONTEXTJ', 4096);
/**
* @since 5.5
*/
class IntlBreakIterator implements IteratorAggregate
{
/* Constants */
const DONE = -1;
const WORD_NONE = 0;
const WORD_NONE_LIMIT = 100;
const WORD_NUMBER = 100;
const WORD_NUMBER_LIMIT = 200;
const WORD_LETTER = 200;
const WORD_LETTER_LIMIT = 300;
const WORD_KANA = 300;
const WORD_KANA_LIMIT = 400;
const WORD_IDEO = 400;
const WORD_IDEO_LIMIT = 500;
const LINE_SOFT = 0;
const LINE_SOFT_LIMIT = 100;
const LINE_HARD = 100;
const LINE_HARD_LIMIT = 200;
const SENTENCE_TERM = 0;
const SENTENCE_TERM_LIMIT = 100;
const SENTENCE_SEP = 100;
const SENTENCE_SEP_LIMIT = 200;
/* Methods */
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Private constructor for disallowing instantiation
*/
private function __construct() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for boundaries of combining character sequences
* @link https://secure.php.net/manual/en/intlbreakiterator.createcharacterinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createCharacterInstance($locale = null) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for boundaries of code points
* @link https://secure.php.net/manual/en/intlbreakiterator.createcodepointinstance.php
* @return IntlBreakIterator
*/
public static function createCodePointInstance() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for logically possible line breaks
* @link https://secure.php.net/manual/en/intlbreakiterator.createlineinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createLineInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for sentence breaks
* @link https://secure.php.net/manual/en/intlbreakiterator.createsentenceinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createSentenceInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for title-casing breaks
* @link https://secure.php.net/manual/en/intlbreakiterator.createtitleinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createTitleInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for word breaks
* @link https://secure.php.net/manual/en/intlbreakiterator.createwordinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createWordInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get index of current position
* @link https://secure.php.net/manual/en/intlbreakiterator.current.php
* @return int
*/
public function current() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set position to the first character in the text
* @link https://secure.php.net/manual/en/intlbreakiterator.first.php
*/
public function first() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Advance the iterator to the first boundary following specified offset
* @link https://secure.php.net/manual/en/intlbreakiterator.following.php
* @param int $offset
*/
public function following($offset) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last error code on the object
* @link https://secure.php.net/manual/en/intlbreakiterator.geterrorcode.php
* @return int
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last error message on the object
* @link https://secure.php.net/manual/en/intlbreakiterator.geterrormessage.php
* @return string
*/
public function getErrorMessage() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the locale associated with the object
* @link https://secure.php.net/manual/en/intlbreakiterator.getlocale.php
* @param string $locale_type
*/
public function getLocale($locale_type) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create iterator for navigating fragments between boundaries
* @link https://secure.php.net/manual/en/intlbreakiterator.getpartsiterator.php
* @param string $key_type [optional]
*/
public function getPartsIterator($key_type = IntlPartsIterator::KEY_SEQUENTIAL) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the text being scanned
* @link https://secure.php.net/manual/en/intlbreakiterator.gettext.php
*/
public function getText() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Tell whether an offset is a boundary's offset
* @link https://secure.php.net/manual/en/intlbreakiterator.isboundary.php
* @param string $offset
*/
public function isBoundary($offset) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the iterator position to index beyond the last character
* @link https://secure.php.net/manual/en/intlbreakiterator.last.php
* @return int
*/
public function last() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://secure.php.net/manual/en/intlbreakiterator.next.php
* @param string $offset [optional]
* @return int
*/
public function next($offset = null) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://secure.php.net/manual/en/intlbreakiterator.preceding.php
* @param int $offset
*/
public function preceding($offset) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the iterator position to the boundary immediately before the current
* @link https://secure.php.net/manual/en/intlbreakiterator.previous.php
* @return int
*/
public function previous() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the text being scanned
* @link https://secure.php.net/manual/en/intlbreakiterator.settext.php
* @param string $text
*/
public function setText($text) { }
public function getIterator(){}
}
class IntlRuleBasedBreakIterator extends IntlBreakIterator implements Traversable {
/* Methods */
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://secure.php.net/manual/en/intlbreakiterator.construct.php
* @param string $rules
* @param string $areCompiled [optional]
*/
public function __construct($rules, $areCompiled) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for boundaries of combining character sequences
* @link https://secure.php.net/manual/en/intlbreakiterator.createcharacterinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createCharacterInstance($locale) { }
/*
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for boundaries of code points
* @link https://secure.php.net/manual/en/intlbreakiterator.createcodepointinstance.php
* @return IntlRuleBasedBreakIterator
*/
public static function createCodePointInstance() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for logically possible line breaks
* @link https://secure.php.net/manual/en/intlbreakiterator.createlineinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createLineInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for sentence breaks
* @link https://secure.php.net/manual/en/intlbreakiterator.createsentenceinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createSentenceInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for title-casing breaks
* @link https://secure.php.net/manual/en/intlbreakiterator.createtitleinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createTitleInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for word breaks
* @link https://secure.php.net/manual/en/intlbreakiterator.createwordinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createWordInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://secure.php.net/manual/en/intlrulebasedbreakiterator.getbinaryrules.php
* Get the binary form of compiled rules
* @return string
*/
public function getBinaryRules() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://secure.php.net/manual/en/intlrulebasedbreakiterator.getrules.php
* Get the rule set used to create this object
* @return string
*/
public function getRules() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://secure.php.net/manual/en/intlrulebasedbreakiterator.getrulesstatus.php
* Get the largest status value from the break rules that determined the current break position
* @return int
*/
public function getRuleStatus() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://secure.php.net/manual/en/intlrulebasedbreakiterator.getrulestatusvec.php
* Get the status values from the break rules that determined the current break position
* @return array
*/
public function getRuleStatusVec() { }
}
/**
* @link https://www.php.net/manual/en/class.intlpartsiterator.php
* @since 5.5
*/
class IntlPartsIterator extends IntlIterator implements Iterator {
const KEY_SEQUENTIAL = 0 ;
const KEY_LEFT = 1 ;
const KEY_RIGHT = 2 ;
/**
* @return IntlBreakIterator
*/
public function getBreakIterator() { }
}
class IntlCodePointBreakIterator extends IntlBreakIterator implements Traversable {
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last code point passed over after advancing or receding the iterator
* @link https://secure.php.net/manual/en/intlcodepointbreakiterator.getlastcodepoint.php
* @return int
*/
public function getLastCodePoint() { }
}
class UConverter {
/* Constants */
const REASON_UNASSIGNED = 0;
const REASON_ILLEGAL = 1;
const REASON_IRREGULAR = 2;
const REASON_RESET = 3;
const REASON_CLOSE = 4;
const REASON_CLONE = 5;
const UNSUPPORTED_CONVERTER = -1;
const SBCS = 0;
const DBCS = 1;
const MBCS = 2;
const LATIN_1 = 3;
const UTF8 = 4;
const UTF16_BigEndian = 5;
const UTF16_LittleEndian = 6;
const UTF32_BigEndian = 7;
const UTF32_LittleEndian = 8;
const EBCDIC_STATEFUL = 9;
const ISO_2022 = 10;
const LMBCS_1 = 11;
const LMBCS_2 = 12;
const LMBCS_3 = 13;
const LMBCS_4 = 14;
const LMBCS_5 = 15;
const LMBCS_6 = 16;
const LMBCS_8 = 17;
const LMBCS_11 = 18;
const LMBCS_16 = 19;
const LMBCS_17 = 20;
const LMBCS_18 = 21;
const LMBCS_19 = 22;
const LMBCS_LAST = 22;
const HZ = 23;
const SCSU = 24;
const ISCII = 25;
const US_ASCII = 26;
const UTF7 = 27;
const BOCU1 = 28;
const UTF16 = 29;
const UTF32 = 30;
const CESU8 = 31;
const IMAP_MAILBOX = 32;
/* Methods */
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create UConverter object
* @link https://php.net/manual/en/uconverter.construct.php
* @param string $destination_encoding
* @param string $source_encoding
*/
public function __construct($destination_encoding = null, $source_encoding = null) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Convert string from one charset to anothe
* @link https://php.net/manual/en/uconverter.convert.php
* @param string $str
* @param bool $reverse
* @return string
*/
public function convert($str, $reverse) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Default "from" callback function
* @link https://php.net/manual/en/uconverter.fromucallback.php
* @param int $reason
* @param string $source
* @param string $codePoint
* @param int $error
* @return mixed
*/
public function fromUCallback($reason, $source, $codePoint, &$error) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the aliases of the given name
* @link https://php.net/manual/en/uconverter.getaliases.php
* @param string $name
* @return array
*/
public static function getAliases($name = null) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the available canonical converter names
* @link https://php.net/manual/en/uconverter.getavailable.php
* @return array
*/
public static function getAvailable() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the destination encoding
* @link https://php.net/manual/en/uconverter.getdestinationencoding.php
* @return string
*/
public function getDestinationEncoding() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the destination converter type
* @link https://php.net/manual/en/uconverter.getdestinationtype.php
* @return int
*/
public function getDestinationType() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last error code on the object
* @link https://php.net/manual/en/uconverter.geterrorcode.php
* @return int
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last error message on the object
* @link https://php.net/manual/en/uconverter.geterrormessage.php
* @return string
*/
public function getErrorMessage() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the source encoding
* @link https://php.net/manual/en/uconverter.getsourceencoding.php
* @return string
*/
public function getSourceEncoding() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the source convertor type
* @link https://php.net/manual/en/uconverter.getsourcetype.php
* @return int
*/
public function getSourceType() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get standards associated to converter names
* @link https://php.net/manual/en/uconverter.getstandards.php
* @return array
*/
public static function getStandards() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get substitution chars
* @link https://php.net/manual/en/uconverter.getsubstchars.php
* @return string
*/
public function getSubstChars() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get string representation of the callback reason
* @link https://php.net/manual/en/uconverter.reasontext.php
* @param int $reason
* @return string
*/
public static function reasonText($reason) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the destination encoding
* @link https://php.net/manual/en/uconverter.setdestinationencoding.php
* @param string $encoding
* @return void
*/
public function setDestinationEncoding($encoding) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the source encoding
* @link https://php.net/manual/en/uconverter.setsourceencoding.php
* @param string $encoding
* @return void
*/
public function setSourceEncoding($encoding) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the substitution chars
* @link https://php.net/manual/en/uconverter.setsubstchars.php
* @param string $chars
* @return void
*/
public function setSubstChars($chars) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Default "to" callback function
* @link https://php.net/manual/en/uconverter.toucallback.php
* @param int $reason
* @param string $source
* @param string $codeUnits
* @param int $error
* @return mixed
*/
public function toUCallback($reason, $source, $codeUnits, &$error) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Convert string from one charset to another
* @link https://php.net/manual/en/uconverter.transcode.php
* @param string $str
* @param string $toEncoding
* @param string $fromEncoding
* @param array $options
* @return string
*/
public static function transcode($str, $toEncoding, $fromEncoding, array $options = []) { }
}
// End of intl v.1.1.0
?>