Atomically attempts to find key in the cache, if it cannot be found generator is called, + * passing key as the only argument. The return value of the call is then cached with the optionally + * specified ttl, and returned. + *
+ * + *Note: When control enters apcu_entry() the lock for the cache is acquired exclusively, it is released when + * control leaves apcu_entry(): In effect, this turns the body of generator into a critical section, + * disallowing two processes from executing the same code paths concurrently. + * In addition, it prohibits the concurrent execution of any other APCu functions, + * since they will acquire the same lock. + *
+ * + * @link https://php.net/manual/en/function.apcu-entry.php + * + * @param string $key Identity of cache entry + * @param callable $generator A callable that accepts key as the only argument and returns the value to cache. + *Warning + * The only APCu function that can be called safely by generator is apcu_entry().
+ * @param int $ttl [optional] Time To Live; store var in the cache for ttl seconds. + * After the ttl has passed, the stored variable will be expunged from the cache (on the next request). + * If no ttl is supplied (or if the ttl is 0), the value will persist until it is removed from the cache manually, + * or otherwise fails to exist in the cache (clear, restart, etc.). + * @return mixed Returns the cached value + * @since APCu 5.1.0 + */ +function apcu_entry($key, callable $generator, $ttl = 0){} + +/** + * Retrieves cached information from APCu's data store + * + * @link https://php.net/manual/en/function.apcu-cache-info.php + * + * @param bool $limited If limited is TRUE, the return value will exclude the individual list of cache entries. + * This is useful when trying to optimize calls for statistics gathering. + * @return array|false Array of cached data (and meta-data) or FALSE on failure + */ +function apcu_cache_info($limited = false){} + +/** + * Whether APCu is usable in the current environment + * + * @link https://www.php.net/manual/en/function.apcu-enabled.php + * + * @return bool + */ +function apcu_enabled(){} + +/** + * @param string $key + */ +function apcu_key_info($key){} + +/** + * The APCuIterator class + * + * The APCuIterator class makes it easier to iterate over large APCu caches. + * This is helpful as it allows iterating over large caches in steps, while grabbing a defined number + * of entries per lock instance, so it frees the cache locks for other activities rather than hold up + * the entire cache to grab 100 (the default) entries. Also, using regular expression matching is more + * efficient as it's been moved to the C level. + * + * @link https://php.net/manual/en/class.apcuiterator.php + * @since APCu 5.0.0 + */ +class APCuIterator implements Iterator +{ + /** + * Constructs an APCuIterator iterator object + * @link https://php.net/manual/en/apcuiterator.construct.php + * @param string|string[]|null $search A PCRE regular expression that matches against APCu key names, + * either as a string for a single regular expression, or as an array of regular expressions. + * Or, optionally pass in NULL to skip the search. + * @param int $format The desired format, as configured with one ore more of the APC_ITER_* constants. + * @param int $chunk_size The chunk size. Must be a value greater than 0. The default value is 100. + * @param int $list The type to list. Either pass in APC_LIST_ACTIVE or APC_LIST_DELETED. + */ + public function __construct($search = null, $format = APC_ITER_ALL, $chunk_size = 100, $list = APC_LIST_ACTIVE){} + + /** + * Rewinds back the iterator to the first element + * @link https://php.net/manual/en/apcuiterator.rewind.php + */ + public function rewind(){} + + /** + * Checks if the current iterator position is valid + * @link https://php.net/manual/en/apcuiterator.valid.php + * @return bool Returns TRUE if the current iterator position is valid, otherwise FALSE. + */ + public function valid(){} + + /** + * Gets the current item from the APCuIterator stack + * @link https://php.net/manual/en/apcuiterator.current.php + * @return mixed Returns the current item on success, or FALSE if no more items or exist, or on failure. + */ + public function current(){} + + /** + * Gets the current iterator key + * @link https://php.net/manual/en/apcuiterator.key.php + * @return string|int|false Returns the key on success, or FALSE upon failure. + */ + public function key(){} + + /** + * Moves the iterator pointer to the next element + * @link https://php.net/manual/en/apcuiterator.next.php + * @return bool Returns TRUE on success or FALSE on failure. + */ + public function next(){} + + /** + * Gets the total number of cache hits + * @link https://php.net/manual/en/apcuiterator.gettotalhits.php + * @return int|false The number of hits on success, or FALSE on failure. + */ + public function getTotalHits(){} + + /** + * Gets the total cache size + * @link https://php.net/manual/en/apcuiterator.gettotalsize.php + * @return int|false The total cache size. + */ + public function getTotalSize(){} + + /** + * Get the total count + * @link https://php.net/manual/en/apcuiterator.gettotalcount.php + * @return int|false The total count. + */ + public function getTotalCount(){} +} diff --git a/build/stubs/imagick.php b/build/stubs/imagick.php new file mode 100644 index 0000000000..0c48973622 --- /dev/null +++ b/build/stubs/imagick.php @@ -0,0 +1,6744 @@ +Makes an exact copy of the Imagick object + * @link https://php.net/manual/en/class.imagick.php + */ +class Imagick implements Iterator, Countable { + const COLOR_BLACK = 11; + const COLOR_BLUE = 12; + const COLOR_CYAN = 13; + const COLOR_GREEN = 14; + const COLOR_RED = 15; + const COLOR_YELLOW = 16; + const COLOR_MAGENTA = 17; + const COLOR_OPACITY = 18; + const COLOR_ALPHA = 19; + const COLOR_FUZZ = 20; + const IMAGICK_EXTNUM = 30403; + const IMAGICK_EXTVER = "3.4.3"; + const QUANTUM_RANGE = 65535; + const USE_ZEND_MM = 0; + const COMPOSITE_DEFAULT = 40; + const COMPOSITE_UNDEFINED = 0; + const COMPOSITE_NO = 1; + const COMPOSITE_ADD = 2; + const COMPOSITE_ATOP = 3; + const COMPOSITE_BLEND = 4; + const COMPOSITE_BUMPMAP = 5; + const COMPOSITE_CLEAR = 7; + const COMPOSITE_COLORBURN = 8; + const COMPOSITE_COLORDODGE = 9; + const COMPOSITE_COLORIZE = 10; + const COMPOSITE_COPYBLACK = 11; + const COMPOSITE_COPYBLUE = 12; + const COMPOSITE_COPY = 13; + const COMPOSITE_COPYCYAN = 14; + const COMPOSITE_COPYGREEN = 15; + const COMPOSITE_COPYMAGENTA = 16; + const COMPOSITE_COPYOPACITY = 17; + const COMPOSITE_COPYRED = 18; + const COMPOSITE_COPYYELLOW = 19; + const COMPOSITE_DARKEN = 20; + const COMPOSITE_DSTATOP = 21; + const COMPOSITE_DST = 22; + const COMPOSITE_DSTIN = 23; + const COMPOSITE_DSTOUT = 24; + const COMPOSITE_DSTOVER = 25; + const COMPOSITE_DIFFERENCE = 26; + const COMPOSITE_DISPLACE = 27; + const COMPOSITE_DISSOLVE = 28; + const COMPOSITE_EXCLUSION = 29; + const COMPOSITE_HARDLIGHT = 30; + const COMPOSITE_HUE = 31; + const COMPOSITE_IN = 32; + const COMPOSITE_LIGHTEN = 33; + const COMPOSITE_LUMINIZE = 35; + const COMPOSITE_MINUS = 36; + const COMPOSITE_MODULATE = 37; + const COMPOSITE_MULTIPLY = 38; + const COMPOSITE_OUT = 39; + const COMPOSITE_OVER = 40; + const COMPOSITE_OVERLAY = 41; + const COMPOSITE_PLUS = 42; + const COMPOSITE_REPLACE = 43; + const COMPOSITE_SATURATE = 44; + const COMPOSITE_SCREEN = 45; + const COMPOSITE_SOFTLIGHT = 46; + const COMPOSITE_SRCATOP = 47; + const COMPOSITE_SRC = 48; + const COMPOSITE_SRCIN = 49; + const COMPOSITE_SRCOUT = 50; + const COMPOSITE_SRCOVER = 51; + const COMPOSITE_SUBTRACT = 52; + const COMPOSITE_THRESHOLD = 53; + const COMPOSITE_XOR = 54; + const COMPOSITE_CHANGEMASK = 6; + const COMPOSITE_LINEARLIGHT = 34; + const COMPOSITE_DIVIDE = 55; + const COMPOSITE_DISTORT = 56; + const COMPOSITE_BLUR = 57; + const COMPOSITE_PEGTOPLIGHT = 58; + const COMPOSITE_VIVIDLIGHT = 59; + const COMPOSITE_PINLIGHT = 60; + const COMPOSITE_LINEARDODGE = 61; + const COMPOSITE_LINEARBURN = 62; + const COMPOSITE_MATHEMATICS = 63; + const COMPOSITE_MODULUSADD = 2; + const COMPOSITE_MODULUSSUBTRACT = 52; + const COMPOSITE_MINUSDST = 36; + const COMPOSITE_DIVIDEDST = 55; + const COMPOSITE_DIVIDESRC = 64; + const COMPOSITE_MINUSSRC = 65; + const COMPOSITE_DARKENINTENSITY = 66; + const COMPOSITE_LIGHTENINTENSITY = 67; + const MONTAGEMODE_FRAME = 1; + const MONTAGEMODE_UNFRAME = 2; + const MONTAGEMODE_CONCATENATE = 3; + const STYLE_NORMAL = 1; + const STYLE_ITALIC = 2; + const STYLE_OBLIQUE = 3; + const STYLE_ANY = 4; + const FILTER_UNDEFINED = 0; + const FILTER_POINT = 1; + const FILTER_BOX = 2; + const FILTER_TRIANGLE = 3; + const FILTER_HERMITE = 4; + const FILTER_HANNING = 5; + const FILTER_HAMMING = 6; + const FILTER_BLACKMAN = 7; + const FILTER_GAUSSIAN = 8; + const FILTER_QUADRATIC = 9; + const FILTER_CUBIC = 10; + const FILTER_CATROM = 11; + const FILTER_MITCHELL = 12; + const FILTER_LANCZOS = 22; + const FILTER_BESSEL = 13; + const FILTER_SINC = 14; + const FILTER_KAISER = 16; + const FILTER_WELSH = 17; + const FILTER_PARZEN = 18; + const FILTER_LAGRANGE = 21; + const FILTER_SENTINEL = 31; + const FILTER_BOHMAN = 19; + const FILTER_BARTLETT = 20; + const FILTER_JINC = 13; + const FILTER_SINCFAST = 15; + const FILTER_ROBIDOUX = 26; + const FILTER_LANCZOSSHARP = 23; + const FILTER_LANCZOS2 = 24; + const FILTER_LANCZOS2SHARP = 25; + const FILTER_ROBIDOUXSHARP = 27; + const FILTER_COSINE = 28; + const FILTER_SPLINE = 29; + const FILTER_LANCZOSRADIUS = 30; + const IMGTYPE_UNDEFINED = 0; + const IMGTYPE_BILEVEL = 1; + const IMGTYPE_GRAYSCALE = 2; + const IMGTYPE_GRAYSCALEMATTE = 3; + const IMGTYPE_PALETTE = 4; + const IMGTYPE_PALETTEMATTE = 5; + const IMGTYPE_TRUECOLOR = 6; + const IMGTYPE_TRUECOLORMATTE = 7; + const IMGTYPE_COLORSEPARATION = 8; + const IMGTYPE_COLORSEPARATIONMATTE = 9; + const IMGTYPE_OPTIMIZE = 10; + const IMGTYPE_PALETTEBILEVELMATTE = 11; + const RESOLUTION_UNDEFINED = 0; + const RESOLUTION_PIXELSPERINCH = 1; + const RESOLUTION_PIXELSPERCENTIMETER = 2; + const COMPRESSION_UNDEFINED = 0; + const COMPRESSION_NO = 1; + const COMPRESSION_BZIP = 2; + const COMPRESSION_FAX = 6; + const COMPRESSION_GROUP4 = 7; + const COMPRESSION_JPEG = 8; + const COMPRESSION_JPEG2000 = 9; + const COMPRESSION_LOSSLESSJPEG = 10; + const COMPRESSION_LZW = 11; + const COMPRESSION_RLE = 12; + const COMPRESSION_ZIP = 13; + const COMPRESSION_DXT1 = 3; + const COMPRESSION_DXT3 = 4; + const COMPRESSION_DXT5 = 5; + const COMPRESSION_ZIPS = 14; + const COMPRESSION_PIZ = 15; + const COMPRESSION_PXR24 = 16; + const COMPRESSION_B44 = 17; + const COMPRESSION_B44A = 18; + const COMPRESSION_LZMA = 19; + const COMPRESSION_JBIG1 = 20; + const COMPRESSION_JBIG2 = 21; + const PAINT_POINT = 1; + const PAINT_REPLACE = 2; + const PAINT_FLOODFILL = 3; + const PAINT_FILLTOBORDER = 4; + const PAINT_RESET = 5; + const GRAVITY_NORTHWEST = 1; + const GRAVITY_NORTH = 2; + const GRAVITY_NORTHEAST = 3; + const GRAVITY_WEST = 4; + const GRAVITY_CENTER = 5; + const GRAVITY_EAST = 6; + const GRAVITY_SOUTHWEST = 7; + const GRAVITY_SOUTH = 8; + const GRAVITY_SOUTHEAST = 9; + const GRAVITY_FORGET = 0; + const GRAVITY_STATIC = 10; + const STRETCH_NORMAL = 1; + const STRETCH_ULTRACONDENSED = 2; + const STRETCH_EXTRACONDENSED = 3; + const STRETCH_CONDENSED = 4; + const STRETCH_SEMICONDENSED = 5; + const STRETCH_SEMIEXPANDED = 6; + const STRETCH_EXPANDED = 7; + const STRETCH_EXTRAEXPANDED = 8; + const STRETCH_ULTRAEXPANDED = 9; + const STRETCH_ANY = 10; + const ALIGN_UNDEFINED = 0; + const ALIGN_LEFT = 1; + const ALIGN_CENTER = 2; + const ALIGN_RIGHT = 3; + const DECORATION_NO = 1; + const DECORATION_UNDERLINE = 2; + const DECORATION_OVERLINE = 3; + const DECORATION_LINETROUGH = 4; + const DECORATION_LINETHROUGH = 4; + const NOISE_UNIFORM = 1; + const NOISE_GAUSSIAN = 2; + const NOISE_MULTIPLICATIVEGAUSSIAN = 3; + const NOISE_IMPULSE = 4; + const NOISE_LAPLACIAN = 5; + const NOISE_POISSON = 6; + const NOISE_RANDOM = 7; + const CHANNEL_UNDEFINED = 0; + const CHANNEL_RED = 1; + const CHANNEL_GRAY = 1; + const CHANNEL_CYAN = 1; + const CHANNEL_GREEN = 2; + const CHANNEL_MAGENTA = 2; + const CHANNEL_BLUE = 4; + const CHANNEL_YELLOW = 4; + const CHANNEL_ALPHA = 8; + const CHANNEL_OPACITY = 8; + const CHANNEL_MATTE = 8; + const CHANNEL_BLACK = 32; + const CHANNEL_INDEX = 32; + const CHANNEL_ALL = 134217727; + const CHANNEL_DEFAULT = 134217719; + const CHANNEL_RGBA = 15; + const CHANNEL_TRUEALPHA = 64; + const CHANNEL_RGBS = 128; + const CHANNEL_GRAY_CHANNELS = 128; + const CHANNEL_SYNC = 256; + const CHANNEL_COMPOSITES = 47; + const METRIC_UNDEFINED = 0; + const METRIC_ABSOLUTEERRORMETRIC = 1; + const METRIC_MEANABSOLUTEERROR = 2; + const METRIC_MEANERRORPERPIXELMETRIC = 3; + const METRIC_MEANSQUAREERROR = 4; + const METRIC_PEAKABSOLUTEERROR = 5; + const METRIC_PEAKSIGNALTONOISERATIO = 6; + const METRIC_ROOTMEANSQUAREDERROR = 7; + const METRIC_NORMALIZEDCROSSCORRELATIONERRORMETRIC = 8; + const METRIC_FUZZERROR = 9; + const PIXEL_CHAR = 1; + const PIXEL_DOUBLE = 2; + const PIXEL_FLOAT = 3; + const PIXEL_INTEGER = 4; + const PIXEL_LONG = 5; + const PIXEL_QUANTUM = 6; + const PIXEL_SHORT = 7; + const EVALUATE_UNDEFINED = 0; + const EVALUATE_ADD = 1; + const EVALUATE_AND = 2; + const EVALUATE_DIVIDE = 3; + const EVALUATE_LEFTSHIFT = 4; + const EVALUATE_MAX = 5; + const EVALUATE_MIN = 6; + const EVALUATE_MULTIPLY = 7; + const EVALUATE_OR = 8; + const EVALUATE_RIGHTSHIFT = 9; + const EVALUATE_SET = 10; + const EVALUATE_SUBTRACT = 11; + const EVALUATE_XOR = 12; + const EVALUATE_POW = 13; + const EVALUATE_LOG = 14; + const EVALUATE_THRESHOLD = 15; + const EVALUATE_THRESHOLDBLACK = 16; + const EVALUATE_THRESHOLDWHITE = 17; + const EVALUATE_GAUSSIANNOISE = 18; + const EVALUATE_IMPULSENOISE = 19; + const EVALUATE_LAPLACIANNOISE = 20; + const EVALUATE_MULTIPLICATIVENOISE = 21; + const EVALUATE_POISSONNOISE = 22; + const EVALUATE_UNIFORMNOISE = 23; + const EVALUATE_COSINE = 24; + const EVALUATE_SINE = 25; + const EVALUATE_ADDMODULUS = 26; + const EVALUATE_MEAN = 27; + const EVALUATE_ABS = 28; + const EVALUATE_EXPONENTIAL = 29; + const EVALUATE_MEDIAN = 30; + const EVALUATE_SUM = 31; + const COLORSPACE_UNDEFINED = 0; + const COLORSPACE_RGB = 1; + const COLORSPACE_GRAY = 2; + const COLORSPACE_TRANSPARENT = 3; + const COLORSPACE_OHTA = 4; + const COLORSPACE_LAB = 5; + const COLORSPACE_XYZ = 6; + const COLORSPACE_YCBCR = 7; + const COLORSPACE_YCC = 8; + const COLORSPACE_YIQ = 9; + const COLORSPACE_YPBPR = 10; + const COLORSPACE_YUV = 11; + const COLORSPACE_CMYK = 12; + const COLORSPACE_SRGB = 13; + const COLORSPACE_HSB = 14; + const COLORSPACE_HSL = 15; + const COLORSPACE_HWB = 16; + const COLORSPACE_REC601LUMA = 17; + const COLORSPACE_REC709LUMA = 19; + const COLORSPACE_LOG = 21; + const COLORSPACE_CMY = 22; + const COLORSPACE_LUV = 23; + const COLORSPACE_HCL = 24; + const COLORSPACE_LCH = 25; + const COLORSPACE_LMS = 26; + const COLORSPACE_LCHAB = 27; + const COLORSPACE_LCHUV = 28; + const COLORSPACE_SCRGB = 29; + const COLORSPACE_HSI = 30; + const COLORSPACE_HSV = 31; + const COLORSPACE_HCLP = 32; + const COLORSPACE_YDBDR = 33; + const COLORSPACE_REC601YCBCR = 18; + const COLORSPACE_REC709YCBCR = 20; + const VIRTUALPIXELMETHOD_UNDEFINED = 0; + const VIRTUALPIXELMETHOD_BACKGROUND = 1; + const VIRTUALPIXELMETHOD_CONSTANT = 2; + const VIRTUALPIXELMETHOD_EDGE = 4; + const VIRTUALPIXELMETHOD_MIRROR = 5; + const VIRTUALPIXELMETHOD_TILE = 7; + const VIRTUALPIXELMETHOD_TRANSPARENT = 8; + const VIRTUALPIXELMETHOD_MASK = 9; + const VIRTUALPIXELMETHOD_BLACK = 10; + const VIRTUALPIXELMETHOD_GRAY = 11; + const VIRTUALPIXELMETHOD_WHITE = 12; + const VIRTUALPIXELMETHOD_HORIZONTALTILE = 13; + const VIRTUALPIXELMETHOD_VERTICALTILE = 14; + const VIRTUALPIXELMETHOD_HORIZONTALTILEEDGE = 15; + const VIRTUALPIXELMETHOD_VERTICALTILEEDGE = 16; + const VIRTUALPIXELMETHOD_CHECKERTILE = 17; + const PREVIEW_UNDEFINED = 0; + const PREVIEW_ROTATE = 1; + const PREVIEW_SHEAR = 2; + const PREVIEW_ROLL = 3; + const PREVIEW_HUE = 4; + const PREVIEW_SATURATION = 5; + const PREVIEW_BRIGHTNESS = 6; + const PREVIEW_GAMMA = 7; + const PREVIEW_SPIFF = 8; + const PREVIEW_DULL = 9; + const PREVIEW_GRAYSCALE = 10; + const PREVIEW_QUANTIZE = 11; + const PREVIEW_DESPECKLE = 12; + const PREVIEW_REDUCENOISE = 13; + const PREVIEW_ADDNOISE = 14; + const PREVIEW_SHARPEN = 15; + const PREVIEW_BLUR = 16; + const PREVIEW_THRESHOLD = 17; + const PREVIEW_EDGEDETECT = 18; + const PREVIEW_SPREAD = 19; + const PREVIEW_SOLARIZE = 20; + const PREVIEW_SHADE = 21; + const PREVIEW_RAISE = 22; + const PREVIEW_SEGMENT = 23; + const PREVIEW_SWIRL = 24; + const PREVIEW_IMPLODE = 25; + const PREVIEW_WAVE = 26; + const PREVIEW_OILPAINT = 27; + const PREVIEW_CHARCOALDRAWING = 28; + const PREVIEW_JPEG = 29; + const RENDERINGINTENT_UNDEFINED = 0; + const RENDERINGINTENT_SATURATION = 1; + const RENDERINGINTENT_PERCEPTUAL = 2; + const RENDERINGINTENT_ABSOLUTE = 3; + const RENDERINGINTENT_RELATIVE = 4; + const INTERLACE_UNDEFINED = 0; + const INTERLACE_NO = 1; + const INTERLACE_LINE = 2; + const INTERLACE_PLANE = 3; + const INTERLACE_PARTITION = 4; + const INTERLACE_GIF = 5; + const INTERLACE_JPEG = 6; + const INTERLACE_PNG = 7; + const FILLRULE_UNDEFINED = 0; + const FILLRULE_EVENODD = 1; + const FILLRULE_NONZERO = 2; + const PATHUNITS_UNDEFINED = 0; + const PATHUNITS_USERSPACE = 1; + const PATHUNITS_USERSPACEONUSE = 2; + const PATHUNITS_OBJECTBOUNDINGBOX = 3; + const LINECAP_UNDEFINED = 0; + const LINECAP_BUTT = 1; + const LINECAP_ROUND = 2; + const LINECAP_SQUARE = 3; + const LINEJOIN_UNDEFINED = 0; + const LINEJOIN_MITER = 1; + const LINEJOIN_ROUND = 2; + const LINEJOIN_BEVEL = 3; + const RESOURCETYPE_UNDEFINED = 0; + const RESOURCETYPE_AREA = 1; + const RESOURCETYPE_DISK = 2; + const RESOURCETYPE_FILE = 3; + const RESOURCETYPE_MAP = 4; + const RESOURCETYPE_MEMORY = 5; + const RESOURCETYPE_TIME = 7; + const RESOURCETYPE_THROTTLE = 8; + const RESOURCETYPE_THREAD = 6; + const DISPOSE_UNRECOGNIZED = 0; + const DISPOSE_UNDEFINED = 0; + const DISPOSE_NONE = 1; + const DISPOSE_BACKGROUND = 2; + const DISPOSE_PREVIOUS = 3; + const INTERPOLATE_UNDEFINED = 0; + const INTERPOLATE_AVERAGE = 1; + const INTERPOLATE_BICUBIC = 2; + const INTERPOLATE_BILINEAR = 3; + const INTERPOLATE_FILTER = 4; + const INTERPOLATE_INTEGER = 5; + const INTERPOLATE_MESH = 6; + const INTERPOLATE_NEARESTNEIGHBOR = 7; + const INTERPOLATE_SPLINE = 8; + const LAYERMETHOD_UNDEFINED = 0; + const LAYERMETHOD_COALESCE = 1; + const LAYERMETHOD_COMPAREANY = 2; + const LAYERMETHOD_COMPARECLEAR = 3; + const LAYERMETHOD_COMPAREOVERLAY = 4; + const LAYERMETHOD_DISPOSE = 5; + const LAYERMETHOD_OPTIMIZE = 6; + const LAYERMETHOD_OPTIMIZEPLUS = 8; + const LAYERMETHOD_OPTIMIZETRANS = 9; + const LAYERMETHOD_COMPOSITE = 12; + const LAYERMETHOD_OPTIMIZEIMAGE = 7; + const LAYERMETHOD_REMOVEDUPS = 10; + const LAYERMETHOD_REMOVEZERO = 11; + const LAYERMETHOD_TRIMBOUNDS = 16; + const ORIENTATION_UNDEFINED = 0; + const ORIENTATION_TOPLEFT = 1; + const ORIENTATION_TOPRIGHT = 2; + const ORIENTATION_BOTTOMRIGHT = 3; + const ORIENTATION_BOTTOMLEFT = 4; + const ORIENTATION_LEFTTOP = 5; + const ORIENTATION_RIGHTTOP = 6; + const ORIENTATION_RIGHTBOTTOM = 7; + const ORIENTATION_LEFTBOTTOM = 8; + const DISTORTION_UNDEFINED = 0; + const DISTORTION_AFFINE = 1; + const DISTORTION_AFFINEPROJECTION = 2; + const DISTORTION_ARC = 9; + const DISTORTION_BILINEAR = 6; + const DISTORTION_PERSPECTIVE = 4; + const DISTORTION_PERSPECTIVEPROJECTION = 5; + const DISTORTION_SCALEROTATETRANSLATE = 3; + const DISTORTION_POLYNOMIAL = 8; + const DISTORTION_POLAR = 10; + const DISTORTION_DEPOLAR = 11; + const DISTORTION_BARREL = 14; + const DISTORTION_SHEPARDS = 16; + const DISTORTION_SENTINEL = 18; + const DISTORTION_BARRELINVERSE = 15; + const DISTORTION_BILINEARFORWARD = 6; + const DISTORTION_BILINEARREVERSE = 7; + const DISTORTION_RESIZE = 17; + const DISTORTION_CYLINDER2PLANE = 12; + const DISTORTION_PLANE2CYLINDER = 13; + const LAYERMETHOD_MERGE = 13; + const LAYERMETHOD_FLATTEN = 14; + const LAYERMETHOD_MOSAIC = 15; + const ALPHACHANNEL_ACTIVATE = 1; + const ALPHACHANNEL_RESET = 7; + const ALPHACHANNEL_SET = 8; + const ALPHACHANNEL_UNDEFINED = 0; + const ALPHACHANNEL_COPY = 3; + const ALPHACHANNEL_DEACTIVATE = 4; + const ALPHACHANNEL_EXTRACT = 5; + const ALPHACHANNEL_OPAQUE = 6; + const ALPHACHANNEL_SHAPE = 9; + const ALPHACHANNEL_TRANSPARENT = 10; + const SPARSECOLORMETHOD_UNDEFINED = 0; + const SPARSECOLORMETHOD_BARYCENTRIC = 1; + const SPARSECOLORMETHOD_BILINEAR = 7; + const SPARSECOLORMETHOD_POLYNOMIAL = 8; + const SPARSECOLORMETHOD_SPEPARDS = 16; + const SPARSECOLORMETHOD_VORONOI = 18; + const SPARSECOLORMETHOD_INVERSE = 19; + const DITHERMETHOD_UNDEFINED = 0; + const DITHERMETHOD_NO = 1; + const DITHERMETHOD_RIEMERSMA = 2; + const DITHERMETHOD_FLOYDSTEINBERG = 3; + const FUNCTION_UNDEFINED = 0; + const FUNCTION_POLYNOMIAL = 1; + const FUNCTION_SINUSOID = 2; + const ALPHACHANNEL_BACKGROUND = 2; + const FUNCTION_ARCSIN = 3; + const FUNCTION_ARCTAN = 4; + const ALPHACHANNEL_FLATTEN = 11; + const ALPHACHANNEL_REMOVE = 12; + const STATISTIC_GRADIENT = 1; + const STATISTIC_MAXIMUM = 2; + const STATISTIC_MEAN = 3; + const STATISTIC_MEDIAN = 4; + const STATISTIC_MINIMUM = 5; + const STATISTIC_MODE = 6; + const STATISTIC_NONPEAK = 7; + const STATISTIC_STANDARD_DEVIATION = 8; + const MORPHOLOGY_CONVOLVE = 1; + const MORPHOLOGY_CORRELATE = 2; + const MORPHOLOGY_ERODE = 3; + const MORPHOLOGY_DILATE = 4; + const MORPHOLOGY_ERODE_INTENSITY = 5; + const MORPHOLOGY_DILATE_INTENSITY = 6; + const MORPHOLOGY_DISTANCE = 7; + const MORPHOLOGY_OPEN = 8; + const MORPHOLOGY_CLOSE = 9; + const MORPHOLOGY_OPEN_INTENSITY = 10; + const MORPHOLOGY_CLOSE_INTENSITY = 11; + const MORPHOLOGY_SMOOTH = 12; + const MORPHOLOGY_EDGE_IN = 13; + const MORPHOLOGY_EDGE_OUT = 14; + const MORPHOLOGY_EDGE = 15; + const MORPHOLOGY_TOP_HAT = 16; + const MORPHOLOGY_BOTTOM_HAT = 17; + const MORPHOLOGY_HIT_AND_MISS = 18; + const MORPHOLOGY_THINNING = 19; + const MORPHOLOGY_THICKEN = 20; + const MORPHOLOGY_VORONOI = 21; + const MORPHOLOGY_ITERATIVE = 22; + const KERNEL_UNITY = 1; + const KERNEL_GAUSSIAN = 2; + const KERNEL_DIFFERENCE_OF_GAUSSIANS = 3; + const KERNEL_LAPLACIAN_OF_GAUSSIANS = 4; + const KERNEL_BLUR = 5; + const KERNEL_COMET = 6; + const KERNEL_LAPLACIAN = 7; + const KERNEL_SOBEL = 8; + const KERNEL_FREI_CHEN = 9; + const KERNEL_ROBERTS = 10; + const KERNEL_PREWITT = 11; + const KERNEL_COMPASS = 12; + const KERNEL_KIRSCH = 13; + const KERNEL_DIAMOND = 14; + const KERNEL_SQUARE = 15; + const KERNEL_RECTANGLE = 16; + const KERNEL_OCTAGON = 17; + const KERNEL_DISK = 18; + const KERNEL_PLUS = 19; + const KERNEL_CROSS = 20; + const KERNEL_RING = 21; + const KERNEL_PEAKS = 22; + const KERNEL_EDGES = 23; + const KERNEL_CORNERS = 24; + const KERNEL_DIAGONALS = 25; + const KERNEL_LINE_ENDS = 26; + const KERNEL_LINE_JUNCTIONS = 27; + const KERNEL_RIDGES = 28; + const KERNEL_CONVEX_HULL = 29; + const KERNEL_THIN_SE = 30; + const KERNEL_SKELETON = 31; + const KERNEL_CHEBYSHEV = 32; + const KERNEL_MANHATTAN = 33; + const KERNEL_OCTAGONAL = 34; + const KERNEL_EUCLIDEAN = 35; + const KERNEL_USER_DEFINED = 36; + const KERNEL_BINOMIAL = 37; + const DIRECTION_LEFT_TO_RIGHT = 2; + const DIRECTION_RIGHT_TO_LEFT = 1; + const NORMALIZE_KERNEL_NONE = 0; + const NORMALIZE_KERNEL_VALUE = 8192; + const NORMALIZE_KERNEL_CORRELATE = 65536; + const NORMALIZE_KERNEL_PERCENT = 4096; + + /** + * (PECL imagick 2.0.0)+ * One of the layer method constants. + *
+ * @return Imagick TRUE on success. + */ + public function compareImageLayers ($method) {} + + /** + * (PECL imagick 2.0.0)+ * A string containing the image. + *
+ * @return bool TRUE on success. + */ + public function pingImageBlob ($image) {} + + /** + * (PECL imagick 2.0.0)+ * An open filehandle to the image. + *
+ * @param string $fileName [optional]+ * Optional filename for this image. + *
+ * @return bool TRUE on success. + */ + public function pingImageFile ($filehandle, $fileName = null) {} + + /** + * (PECL imagick 2.0.0)+ * By default target must match a particular pixel color exactly. + * However, in many cases two colors may differ by a small amount. + * The fuzz member of image defines how much tolerance is acceptable + * to consider two colors as the same. This parameter represents the variation + * on the quantum range. + *
+ * @return bool TRUE on success. + */ + public function trimImage ($fuzz) {} + + /** + * (PECL imagick 2.0.0)+ * The amplitude of the wave. + *
+ * @param float $length+ * The length of the wave. + *
+ * @return bool TRUE on success. + */ + public function waveImage ($amplitude, $length) {} + + /** + * (PECL imagick 2.0.0)+ * The black point. + *
+ * @param float $whitePoint+ * The white point + *
+ * @param int $x+ * X offset of the ellipse + *
+ * @param int $y+ * Y offset of the ellipse + *
+ * @return bool TRUE on success. + */ + public function vignetteImage ($blackPoint, $whitePoint, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * True activates the matte channel and false disables it. + *
+ * @return bool TRUE on success. + */ + public function setImageMatte ($matte) {} + + /** + * Adaptively resize image with data dependent triangulation + * + * If legacy is true, the calculations are done with the small rounding bug that existed in Imagick before 3.4.0.+ * The radius of the Gaussian, in pixels, not counting the center pixel + *
+ * @param float $sigma+ * The standard deviation of the Gaussian, in pixels. + *
+ * @param float $angle+ * Apply the effect along this angle. + *
+ * @return bool TRUE on success. + */ + public function sketchImage ($radius, $sigma, $angle) {} + + /** + * (PECL imagick 2.0.0)+ * A value other than zero shades the intensity of each pixel. + *
+ * @param float $azimuth+ * Defines the light source direction. + *
+ * @param float $elevation+ * Defines the light source direction. + *
+ * @return bool TRUE on success. + */ + public function shadeImage ($gray, $azimuth, $elevation) {} + + /** + * (PECL imagick 2.0.0)+ * The width in pixels. + *
+ * @param int $rows+ * The height in pixels. + *
+ * @param int $offset+ * The image offset. + *
+ * @return bool TRUE on success. + */ + public function setSizeOffset ($columns, $rows, $offset) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the Gaussian, in pixels, not counting the center pixel. + * Provide a value of 0 and the radius will be chosen automagically. + *
+ * @param float $sigma+ * The standard deviation of the Gaussian, in pixels. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return bool TRUE on success. + */ + public function adaptiveBlurImage ($radius, $sigma, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (PECL imagick 2.0.0)+ * The black point. + *
+ * @param float $white_point+ * The white point. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Imagick::CHANNEL_ALL. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function contrastStretchImage ($black_point, $white_point, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the Gaussian, in pixels, not counting the center pixel. Use 0 for auto-select. + *
+ * @param float $sigma+ * The standard deviation of the Gaussian, in pixels. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return bool TRUE on success. + */ + public function adaptiveSharpenImage ($radius, $sigma, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (PECL imagick 2.0.0)+ * The low point + *
+ * @param float $high+ * The high point + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function randomThresholdImage ($low, $high, $channel = Imagick::CHANNEL_ALL) {} + + /** + * @param $xRounding + * @param $yRounding + * @param $strokeWidth [optional] + * @param $displace [optional] + * @param $sizeCorrection [optional] + */ + public function roundCornersImage ($xRounding, $yRounding, $strokeWidth, $displace, $sizeCorrection) {} + + /** + * (PECL imagick 2.0.0)+ * x rounding + *
+ * @param float $y_rounding+ * y rounding + *
+ * @param float $stroke_width [optional]+ * stroke width + *
+ * @param float $displace [optional]+ * image displace + *
+ * @param float $size_correction [optional]+ * size correction + *
+ * @return bool TRUE on success. + */ + public function roundCorners ($x_rounding, $y_rounding, $stroke_width = 10.0, $displace = 5.0, $size_correction = -6.0) {} + + /** + * (PECL imagick 2.0.0)+ * The position to set the iterator to + *
+ * @return bool TRUE on success. + */ + public function setIteratorIndex ($index) {} + + /** + * (PECL imagick 2.0.0)+ * A crop geometry string. This geometry defines a subregion of the image to crop. + *
+ * @param string $geometry+ * An image geometry string. This geometry defines the final size of the image. + *
+ * @return Imagick TRUE on success. + */ + public function transformImage ($crop, $geometry) {} + + /** + * (PECL imagick 2.0.0)+ * The level of transparency: 1.0 is fully opaque and 0.0 is fully + * transparent. + *
+ * @return bool TRUE on success. + */ + public function setImageOpacity ($opacity) {} + + /** + * (PECL imagick 2.2.2)+ * A string containing the name of the threshold dither map to use + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function orderedPosterizeImage ($threshold_map, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * The polaroid properties + *
+ * @param float $angle+ * The polaroid angle + *
+ * @return bool TRUE on success. + */ + public function polaroidImage (ImagickDraw $properties, $angle) {} + + /** + * (PECL imagick 2.0.0)+ * name of the property (for example Exif:DateTime) + *
+ * @return string|false a string containing the image property, false if a + * property with the given name does not exist. + */ + public function getImageProperty ($name) {} + + /** + * (PECL imagick 2.0.0)+ * The method is one of the Imagick::INTERPOLATE_* constants + *
+ * @return bool TRUE on success. + */ + public function setImageInterpolateMethod ($method) {} + + /** + * (PECL imagick 2.0.0)+ * The image black point + *
+ * @param float $whitePoint+ * The image white point + *
+ * @return bool TRUE on success. + */ + public function linearStretchImage ($blackPoint, $whitePoint) {} + + /** + * (PECL imagick 2.0.0)+ * The new width + *
+ * @param int $height+ * The new height + *
+ * @param int $x+ * X position for the new size + *
+ * @param int $y+ * Y position for the new size + *
+ * @return bool TRUE on success. + */ + public function extentImage ($width, $height, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * One of the orientation constants + *
+ * @return bool TRUE on success. + */ + public function setImageOrientation ($orientation) {} + + /** + * (PECL imagick 2.1.0)+ * ImagickPixel object or a string containing the fill color + *
+ * @param float $fuzz+ * The amount of fuzz. For example, set fuzz to 10 and the color red at + * intensities of 100 and 102 respectively are now interpreted as the + * same color for the purposes of the floodfill. + *
+ * @param mixed $bordercolor+ * ImagickPixel object or a string containing the border color + *
+ * @param int $x+ * X start position of the floodfill + *
+ * @param int $y+ * Y start position of the floodfill + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return bool TRUE on success. + */ + public function paintFloodfillImage ($fill, $fuzz, $bordercolor, $x, $y, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * Imagick object containing the color lookup table + *
+ * @param int $channel [optional]+ * The Channeltype + * constant. When not supplied, default channels are replaced. + *
+ * @return bool TRUE on success. + * @since 2.0.0 + */ + public function clutImage (Imagick $lookup_table, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (PECL imagick 2.0.0)+ * The pattern for property names. + *
+ * @param bool $only_names [optional]+ * Whether to return only property names. If FALSE then also the values are returned + *
+ * @return array an array containing the image properties or property names. + */ + public function getImageProperties ($pattern = "*", $only_names = true) {} + + /** + * (PECL imagick 2.2.0)+ * The pattern for profile names. + *
+ * @param bool $include_values [optional]+ * Whether to return only profile names. If FALSE then only profile names will be returned. + *
+ * @return array an array containing the image profiles or profile names. + */ + public function getImageProfiles ($pattern = "*", $include_values = true) {} + + /** + * (PECL imagick 2.0.1)+ * The method of image distortion. See distortion constants + *
+ * @param array $arguments+ * The arguments for this distortion method + *
+ * @param bool $bestfit+ * Attempt to resize destination to fit distorted source + *
+ * @return bool TRUE on success. + */ + public function distortImage ($method, array $arguments, $bestfit) {} + + /** + * (No version information available, might only be in SVN)+ * Filehandle where to write the image + *
+ * @return bool TRUE on success. + */ + public function writeImageFile ($filehandle) {} + + /** + * (No version information available, might only be in SVN)+ * Filehandle where to write the images + *
+ * @return bool TRUE on success. + */ + public function writeImagesFile ($filehandle) {} + + /** + * (No version information available, might only be in SVN)+ * The page definition. For example 7168x5147+0+0 + *
+ * @return bool TRUE on success. + */ + public function resetImagePage ($page) {} + + /** + * (No version information available, might only be in SVN)+ * The Imagick object containing the clip mask + *
+ * @return bool TRUE on success. + */ + public function setImageClipMask (Imagick $clip_mask) {} + + /** + * (No version information available, might only be in SVN)+ * X server address + *
+ * @return bool TRUE on success. + */ + public function animateImages ($x_server) {} + + /** + * (No version information available, might only be in SVN)+ * The matrix containing the color values + *
+ * @return bool TRUE on success. + */ + public function recolorImage (array $matrix) {} + + /** + * (PECL imagick 2.1.0)+ * Font name or a filename + *
+ * @return bool TRUE on success. + */ + public function setFont ($font) {} + + /** + * (PECL imagick 2.1.0)+ * Point size + *
+ * @return bool TRUE on success. + */ + public function setPointSize ($point_size) {} + + /** + * (No version information available, might only be in SVN)+ * One of the Imagick::LAYERMETHOD_* constants + *
+ * @return Imagick Returns an Imagick object containing the merged image. + * @throws ImagickException + */ + public function mergeImageLayers ($layer_method) {} + + /** + * (No version information available, might only be in SVN)+ * One of the Imagick::ALPHACHANNEL_* constants + *
+ * @return bool TRUE on success. + */ + public function setImageAlphaChannel ($mode) {} + + /** + * (No version information available, might only be in SVN)+ * ImagickPixel object or a string containing the fill color + *
+ * @param float $fuzz+ * The amount of fuzz. For example, set fuzz to 10 and the color red at intensities of 100 and 102 respectively are now interpreted as the same color. + *
+ * @param mixed $target+ * ImagickPixel object or a string containing the target color to paint + *
+ * @param int $x+ * X start position of the floodfill + *
+ * @param int $y+ * Y start position of the floodfill + *
+ * @param bool $invert+ * If TRUE paints any pixel that does not match the target color. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return bool TRUE on success. + */ + public function floodFillPaintImage ($fill, $fuzz, $target, $x, $y, $invert, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (No version information available, might only be in SVN)+ * ImagickPixel object or a string containing the color to change + *
+ * @param mixed $fill+ * The replacement color + *
+ * @param float $fuzz+ * The amount of fuzz. For example, set fuzz to 10 and the color red at intensities of 100 and 102 respectively are now interpreted as the same color. + *
+ * @param bool $invert+ * If TRUE paints any pixel that does not match the target color. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return bool TRUE on success. + */ + public function opaquePaintImage ($target, $fill, $fuzz, $invert, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (No version information available, might only be in SVN)+ * The target color to paint + *
+ * @param float $alpha+ * The level of transparency: 1.0 is fully opaque and 0.0 is fully transparent. + *
+ * @param float $fuzz+ * The amount of fuzz. For example, set fuzz to 10 and the color red at intensities of 100 and 102 respectively are now interpreted as the same color. + *
+ * @param bool $invert+ * If TRUE paints any pixel that does not match the target color. + *
+ * @return bool TRUE on success. + */ + public function transparentPaintImage ($target, $alpha, $fuzz, $invert) {} + + /** + * (No version information available, might only be in SVN)+ * The width of the target size + *
+ * @param int $height+ * The height of the target size + *
+ * @param float $delta_x+ * How much the seam can traverse on x-axis. + * Passing 0 causes the seams to be straight. + *
+ * @param float $rigidity+ * Introduces a bias for non-straight seams. This parameter is + * typically 0. + *
+ * @return bool TRUE on success. + */ + public function liquidRescaleImage ($width, $height, $delta_x, $rigidity) {} + + /** + * (No version information available, might only be in SVN)+ * The passphrase + *
+ * @return bool TRUE on success. + */ + public function encipherImage ($passphrase) {} + + /** + * (No version information available, might only be in SVN)+ * The passphrase + *
+ * @return bool TRUE on success. + */ + public function decipherImage ($passphrase) {} + + /** + * (No version information available, might only be in SVN)+ * The gravity property. Refer to the list of + * gravity constants. + *
+ * @return bool No value is returned. + */ + public function setGravity ($gravity) {} + + /** + * (No version information available, might only be in SVN)+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return array an array containing minima and maxima values of the channel(s). + */ + public function getImageChannelRange ($channel) {} + + /** + * (No version information available, might only be in SVN)+ * Imagick object containing the reference image + *
+ * @param int $metric+ * Refer to this list of metric type constants. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return float a double describing the channel distortion. + */ + public function getImageChannelDistortions (Imagick $reference, $metric, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (No version information available, might only be in SVN)+ * The gravity property. Refer to the list of + * gravity constants. + *
+ * @return bool No value is returned. + */ + public function setImageGravity ($gravity) {} + + /** + * (No version information available, might only be in SVN)+ * The image x position + *
+ * @param int $y+ * The image y position + *
+ * @param int $width+ * The image width + *
+ * @param int $height+ * The image height + *
+ * @param string $map+ * Map of pixel ordering as a string. This can be for example RGB. + * The value can be any combination or order of R = red, G = green, B = blue, A = alpha (0 is transparent), + * O = opacity (0 is opaque), C = cyan, Y = yellow, M = magenta, K = black, I = intensity (for grayscale), P = pad. + *
+ * @param int $storage+ * The pixel storage method. + * Refer to this list of pixel constants. + *
+ * @param array $pixels+ * The array of pixels + *
+ * @return bool TRUE on success. + */ + public function importImagePixels ($x, $y, $width, $height, $map, $storage, array $pixels) {} + + /** + * (No version information available, might only be in SVN)+ * Deskew threshold + *
+ * @return bool + */ + public function deskewImage ($threshold) {} + + /** + * (No version information available, might only be in SVN)+ * One of the COLORSPACE constants. + *
+ * @param float $cluster_threshold+ * A percentage describing minimum number of pixels + * contained in hexedra before it is considered valid. + *
+ * @param float $smooth_threshold+ * Eliminates noise from the histogram. + *
+ * @param bool $verbose [optional]+ * Whether to output detailed information about recognised classes. + *
+ * @return bool + */ + public function segmentImage ($COLORSPACE, $cluster_threshold, $smooth_threshold, $verbose = false) {} + + /** + * (No version information available, might only be in SVN)+ * Refer to this list of sparse method constants + *
+ * @param array $arguments+ * An array containing the coordinates. + * The array is in format array(1,1, 2,45) + *
+ * @param int $channel [optional] + * @return bool TRUE on success. + */ + public function sparseColorImage ($SPARSE_METHOD, array $arguments, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (No version information available, might only be in SVN)+ * An Imagick object containing the replacement colors + *
+ * @param int $DITHER+ * Refer to this list of dither method constants + *
+ * @return bool TRUE on success. + */ + public function remapImage (Imagick $replacement, $DITHER) {} + + /** + * (No version information available, might only be in SVN)+ * X-coordinate of the exported area + *
+ * @param int $y+ * Y-coordinate of the exported area + *
+ * @param int $width+ * Width of the exported aread + *
+ * @param int $height+ * Height of the exported area + *
+ * @param string $map+ * Ordering of the exported pixels. For example "RGB". + * Valid characters for the map are R, G, B, A, O, C, Y, M, K, I and P. + *
+ * @param int $STORAGE+ * Refer to this list of pixel type constants + *
+ * @return array an array containing the pixels values. + */ + public function exportImagePixels ($x, $y, $width, $height, $map, $STORAGE) {} + + /** + * (No version information available, might only be in SVN)+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return array an array with kurtosis and skewness + * members. + */ + public function getImageChannelKurtosis ($channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (No version information available, might only be in SVN)+ * Refer to this list of function constants + *
+ * @param array $arguments+ * Array of arguments to pass to this function. + *
+ * @param int $channel [optional] + * @return bool TRUE on success. + */ + public function functionImage ($function, array $arguments, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * @param $COLORSPACE + */ + public function transformImageColorspace ($COLORSPACE) {} + + /** + * (No version information available, might only be in SVN)+ * Imagick object containing the Hald lookup image. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return bool TRUE on success. + */ + public function haldClutImage (Imagick $clut, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * @param $CHANNEL [optional] + */ + public function autoLevelImage ($CHANNEL) {} + + /** + * @param $factor [optional] + */ + public function blueShiftImage ($factor) {} + + /** + * (No version information available, might only be in SVN)+ * The name of the artifact + *
+ * @return string the artifact value on success. + */ + public function getImageArtifact ($artifact) {} + + /** + * (No version information available, might only be in SVN)+ * The name of the artifact + *
+ * @param string $value+ * The value of the artifact + *
+ * @return bool TRUE on success. + */ + public function setImageArtifact ($artifact, $value) {} + + /** + * (No version information available, might only be in SVN)+ * The name of the artifact to delete + *
+ * @return bool TRUE on success. + */ + public function deleteImageArtifact ($artifact) {} + + /** + * (PECL imagick 0.9.10-0.9.9)+ * One of the COLORSPACE constants + *
+ * @return bool TRUE on success. + */ + public function setColorspace ($COLORSPACE) {} + + /** + * @param $CHANNEL [optional] + */ + public function clampImage ($CHANNEL) {} + + /** + * @param $stack + * @param $offset + */ + public function smushImages ($stack, $offset) {} + + /** + * (PECL imagick 2.0.0)+ * The path to an image to load or an array of paths. Paths can include + * wildcards for file names, or can be URLs. + *
+ * @throws ImagickException Throws ImagickException on error. + */ + public function __construct ($files = null) {} + + /** + * @return string + */ + public function __toString () {} + + public function count () {} + + /** + * (PECL imagick 2.0.0)+ * The x-coordinate of the region. + *
+ * @param int $y+ * The y-coordinate of the region. + *
+ * @param int $columns+ * The width of the region. + *
+ * @param int $rows+ * The height of the region. + *
+ * @return ImagickPixelIterator an ImagickPixelIterator for an image section. + */ + public function getPixelRegionIterator ($x, $y, $columns, $rows) {} + + /** + * (PECL imagick 0.9.0-0.9.9)+ * String presentation of the image format. Format support + * depends on the ImageMagick installation. + *
+ * @return bool TRUE on success. + */ + public function setImageFormat ($format) {} + + /** + * Scales the size of an image to the given dimensions. Passing zero as either of the arguments will preserve dimension while scaling.+ * Filename where to write the image. The extension of the filename + * defines the type of the file. + * Format can be forced regardless of file extension using format: prefix, + * for example "jpg:test.png". + *
+ * @return bool TRUE on success. + */ + public function writeImage ($filename = null) {} + + /** + * (PECL imagick 0.9.0-0.9.9)+ * Blur radius + *
+ * @param float $sigma+ * Standard deviation + *
+ * @param int $channel [optional]+ * The Channeltype + * constant. When not supplied, all channels are blurred. + *
+ * @return bool TRUE on success. + */ + public function blurImage ($radius, $sigma, $channel = null) {} + + /** + * Changes the size of an image to the given dimensions and removes any associated profiles.+ * Image width + *
+ * @param int $rows+ * Image height + *
+ * @param bool $bestfit [optional]+ * Whether to force maximum values + *
+ * The behavior of the parameter bestfit changed in Imagick 3.0.0. Before this version given dimensions 400x400 an image of dimensions 200x150 would be left untouched. In Imagick 3.0.0 and later the image would be scaled up to size 400x300 as this is the "best fit" for the given dimensions. If bestfit parameter is used both width and height must be given. + * @param bool $fill [optional] + * @param bool $legacy [optional] Added since 3.4.0. Default value FALSE + * @return bool TRUE on success. + * @since 2.0.0 + */ + public function thumbnailImage ($columns, $rows, $bestfit = false, $fill = false, $legacy = false) {} + + /** + * Creates a cropped thumbnail at the requested size. + * If legacy is true, uses the incorrect behaviour that was present until Imagick 3.4.0. + * If false it uses the correct behaviour. + * @link https://php.net/manual/en/imagick.cropthumbnailimage.php + * @param int $width The width of the thumbnail + * @param int $height The Height of the thumbnail + * @param bool $legacy [optional] Added since 3.4.0. Default value FALSE + * @return bool TRUE on succes + * @throws ImagickException Throws ImagickException on error + * @since 2.0.0 + */ + public function cropThumbnailImage ($width, $height, $legacy = false) {} + + /** + * (PECL imagick 2.0.0)+ * The position to set the iterator to + *
+ * @return bool TRUE on success. + */ + public function setImageIndex ($index) {} + + /** + * (PECL imagick 2.0.0)+ * The comment to add + *
+ * @return bool TRUE on success. + */ + public function commentImage ($comment) {} + + /** + * (PECL imagick 2.0.0)+ * The width of the crop + *
+ * @param int $height+ * The height of the crop + *
+ * @param int $x+ * The X coordinate of the cropped region's top left corner + *
+ * @param int $y+ * The Y coordinate of the cropped region's top left corner + *
+ * @return bool TRUE on success. + */ + public function cropImage ($width, $height, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * The label to add + *
+ * @return bool TRUE on success. + */ + public function labelImage ($label) {} + + /** + * (PECL imagick 2.0.0)+ * The drawing operations to render on the image. + *
+ * @return bool TRUE on success. + */ + public function drawImage (ImagickDraw $draw) {} + + /** + * (No version information available, might only be in SVN)+ * The image compression quality as an integer + *
+ * @return bool TRUE on success. + */ + public function setImageCompressionQuality ($quality) {} + + /** + * (PECL imagick 2.2.2)+ * The ImagickDraw object that contains settings for drawing the text + *
+ * @param float $x+ * Horizontal offset in pixels to the left of text + *
+ * @param float $y+ * Vertical offset in pixels to the baseline of text + *
+ * @param float $angle+ * The angle at which to write the text + *
+ * @param string $text+ * The string to draw + *
+ * @return bool TRUE on success. + */ + public function annotateImage (ImagickDraw $draw_settings, $x, $y, $angle, $text) {} + + /** + * (PECL imagick 2.0.0)+ * Imagick object which holds the composite image + *
+ * @param int $composite Composite operator + * @param int $x+ * The column offset of the composited image + *
+ * @param int $y+ * The row offset of the composited image + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function compositeImage (Imagick $composite_object, $composite, $x, $y, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * The font name, size, and color are obtained from this object. + *
+ * @param string $tile_geometry+ * The number of tiles per row and page (e.g. 6x4+0+0). + *
+ * @param string $thumbnail_geometry+ * Preferred image size and border size of each thumbnail + * (e.g. 120x120+4+3>). + *
+ * @param int $mode+ * Thumbnail framing mode, see Montage Mode constants. + *
+ * @param string $frame+ * Surround the image with an ornamental border (e.g. 15x15+3+3). The + * frame color is that of the thumbnail's matte color. + *
+ * @return Imagick TRUE on success. + */ + public function montageImage (ImagickDraw $draw, $tile_geometry, $thumbnail_geometry, $mode, $frame) {} + + /** + * (PECL imagick 2.0.0)+ * Width of the local neighborhood. + *
+ * @param int $height+ * Height of the local neighborhood. + *
+ * @param int $offset+ * The mean offset + *
+ * @return bool TRUE on success. + */ + public function adaptiveThresholdImage ($width, $height, $offset) {} + + /** + * (PECL imagick 2.0.0)+ * The threshold below which everything turns black + *
+ * @return bool TRUE on success. + */ + public function blackThresholdImage ($threshold) {} + + /** + * (PECL imagick 2.0.0)+ * Whether to stack the images vertically. + * By default (or if FALSE is specified) images are stacked left-to-right. + * If stack is TRUE, images are stacked top-to-bottom. + *
+ * @return Imagick Imagick instance on success. + */ + public function appendImages ($stack = false) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the Gaussian, in pixels, not counting the center pixel + *
+ * @param float $sigma+ * The standard deviation of the Gaussian, in pixels + *
+ * @return bool TRUE on success. + */ + public function charcoalImage ($radius, $sigma) {} + + /** + * (PECL imagick 2.0.0)+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function normalizeImage ($channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the circular neighborhood. + *
+ * @return bool TRUE on success. + */ + public function oilPaintImage ($radius) {} + + /** + * (PECL imagick 2.0.0)+ * The X offset. + *
+ * @param int $y+ * The Y offset. + *
+ * @return bool TRUE on success. + */ + public function rollImage ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * The background color + *
+ * @param float $degrees+ * The number of degrees to rotate the image + *
+ * @return bool TRUE on success. + */ + public function rotateImage ($background, $degrees) {} + + /** + * (PECL imagick 2.0.0)+ * One of the COMPRESSION constants + *
+ * @return bool TRUE on success. + */ + public function setImageCompression ($compression) {} + + /** + * (PECL imagick 2.0.0)+ * The amount of time expressed in 'ticks' that the image should be + * displayed for. For animated GIFs there are 100 ticks per second, so a + * value of 20 would be 20/100 of a second aka 1/5th of a second. + *
+ * @return bool TRUE on success. + */ + public function setImageDelay ($delay) {} + + /** + * (PECL imagick 2.0.0)+ * The number of iterations the image should loop over. Set to '0' to loop + * continuously. + *
+ * @return bool TRUE on success. + */ + public function setImageIterations ($iterations) {} + + /** + * (PECL imagick 2.0.0)+ * The duration for which an image should be displayed expressed in ticks + * per second. + *
+ * @return bool TRUE on success. + */ + public function setImageTicksPerSecond ($ticks_per_second) {} + + /** + * (PECL imagick 2.0.0)+ * The background color + *
+ * @param float $x_shear+ * The number of degrees to shear on the x axis + *
+ * @param float $y_shear+ * The number of degrees to shear on the y axis + *
+ * @return bool TRUE on success. + */ + public function shearImage ($background, $x_shear, $y_shear) {} + + /** + * (PECL imagick 2.0.0)+ * The filename to read the information from. + *
+ * @return bool TRUE on success. + */ + public function pingImage ($filename) {} + + /** + * (PECL imagick 2.0.0)+ * The X server name + *
+ * @return bool TRUE on success. + */ + public function displayImage ($servername) {} + + /** + * (PECL imagick 2.0.0)+ * The X server name + *
+ * @return bool TRUE on success. + */ + public function displayImages ($servername) {} + + /** + * (PECL imagick 2.0.0)+ * The query pattern + *
+ * @return array an array containing the configured fonts. + */ + public static function queryFonts ($pattern = "*") {} + + /** + * (PECL imagick 2.0.0)+ * ImagickDraw object containing font properties + *
+ * @param string $text+ * The text + *
+ * @param bool $multiline [optional]+ * Multiline parameter. If left empty it is autodetected + *
+ * @return array a multi-dimensional array representing the font metrics. + */ + public function queryFontMetrics (ImagickDraw $properties, $text, $multiline = null) {} + + /** + * (PECL imagick 2.0.0)+ * The type of the noise. Refer to this list of + * noise constants. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return bool TRUE on success. + */ + public function addNoiseImage ($noise_type, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the Gaussian, in pixels, not counting the center pixel. + *
+ * @param float $sigma+ * The standard deviation of the Gaussian, in pixels. + *
+ * @param float $angle+ * Apply the effect along this angle. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + * The channel argument affects only if Imagick is compiled against ImageMagick version + * 6.4.4 or greater. + *
+ * @return bool TRUE on success. + */ + public function motionBlurImage ($radius, $sigma, $angle, $channel = Imagick::CHANNEL_DEFAULT) {} + + /** + * (PECL imagick 2.0.0)+ * The number of in-between images to generate. + *
+ * @return Imagick This method returns a new Imagick object on success. + * Throw an ImagickException on error. + * @throws ImagickException on error + */ + public function morphImages ($number_frames) {} + + /** + * (PECL imagick 2.0.0)+ * The affine matrix + *
+ * @return bool TRUE on success. + */ + public function affineTransformImage (ImagickDraw $matrix) {} + + /** + * (PECL imagick 2.0.0)+ * ImagickPixel object or a string containing the border color + *
+ * @param int $width+ * Border width + *
+ * @param int $height+ * Border height + *
+ * @return bool TRUE on success. + */ + public function borderImage ($bordercolor, $width, $height) {} + + /** + * (PECL imagick 2.0.0)+ * Width of the chopped area + *
+ * @param int $height+ * Height of the chopped area + *
+ * @param int $x+ * X origo of the chopped area + *
+ * @param int $y+ * Y origo of the chopped area + *
+ * @return bool TRUE on success. + */ + public function chopImage ($width, $height, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * The name of the path + *
+ * @param bool $inside+ * If TRUE later operations take effect inside clipping path. + * Otherwise later operations take effect outside clipping path. + *
+ * @return bool TRUE on success. + */ + public function clipPathImage ($pathname, $inside) {} + + /** + * @param $pathname + * @param $inside + */ + public function clipImagePath ($pathname, $inside) {} + + /** + * (PECL imagick 2.0.0)+ * ImagickPixel object containing the fill color + *
+ * @param float $fuzz+ * The amount of fuzz. For example, set fuzz to 10 and the color red at + * intensities of 100 and 102 respectively are now interpreted as the + * same color for the purposes of the floodfill. + *
+ * @param mixed $bordercolor+ * ImagickPixel object containing the border color + *
+ * @param int $x+ * X start position of the floodfill + *
+ * @param int $y+ * Y start position of the floodfill + *
+ * @return bool TRUE on success. + */ + public function colorFloodfillImage ($fill, $fuzz, $bordercolor, $x, $y) {} + + /** + * Blends the fill color with each pixel in the image. The 'opacity' color is a per channel strength factor for how strongly the color should be applied.+ * ImagickPixel object or a string containing the colorize color + *
+ * @param mixed $opacity+ * ImagickPixel object or an float containing the opacity value. + * 1.0 is fully opaque and 0.0 is fully transparent. + *
+ * @param bool $legacy [optional] Added since 3.4.0. Default value FALSE + * @return bool TRUE on success. + * @throws ImagickException Throws ImagickException on error + * @since 2.0.0 + */ + public function colorizeImage ($colorize, $opacity, $legacy = false) {} + + /** + * (PECL imagick 2.0.0)+ * Imagick object containing the image to compare. + *
+ * @param int $channelType+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @param int $metricType+ * One of the metric type constants. + *
+ * @return array Array consisting of new_wand and + * distortion. + */ + public function compareImageChannels (Imagick $image, $channelType, $metricType) {} + + /** + * (PECL imagick 2.0.0)+ * An image to compare to. + *
+ * @param int $metric+ * Provide a valid metric type constant. Refer to this + * list of metric constants. + *
+ * @return array Array consisting of an Imagick object of the + * reconstructed image and a double representing the difference. + * @throws ImagickException Throws ImagickException on error. + */ + public function compareImages (Imagick $compare, $metric) {} + + /** + * (PECL imagick 2.0.0)+ * The sharpen value + *
+ * @return bool TRUE on success. + */ + public function contrastImage ($sharpen) {} + + /** + * (PECL imagick 2.0.0)+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return Imagick TRUE on success. + */ + public function combineImages ($channelType) {} + + /** + * (PECL imagick 2.0.0)+ * The convolution kernel + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function convolveImage (array $kernel, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * The amount to displace the colormap. + *
+ * @return bool TRUE on success. + */ + public function cycleColormapImage ($displace) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the operation. + *
+ * @return bool TRUE on success. + */ + public function edgeImage ($radius) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the effect + *
+ * @param float $sigma+ * The sigma of the effect + *
+ * @return bool TRUE on success. + */ + public function embossImage ($radius, $sigma) {} + + /** + * (PECL imagick 2.0.0)+ * The evaluation operator + *
+ * @param float $constant+ * The value of the operator + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function evaluateImage ($op, $constant, $channel = Imagick::CHANNEL_ALL) {} + + /** + * Merges a sequence of images. This is useful for combining Photoshop layers into a single image. + * This is replaced by: + *+ * $im = $im->mergeImageLayers(\Imagick::LAYERMETHOD_FLATTEN) + *+ * @link https://php.net/manual/en/imagick.flattenimages.php + * @return Imagick Returns an Imagick object containing the merged image. + * @throws ImagickException Throws ImagickException on error. + * @since 2.0.0 + */ + public function flattenImages () {} + + /** + * (PECL imagick 2.0.0)
+ * ImagickPixel object or a string representing the matte color + *
+ * @param int $width+ * The width of the border + *
+ * @param int $height+ * The height of the border + *
+ * @param int $inner_bevel+ * The inner bevel width + *
+ * @param int $outer_bevel+ * The outer bevel width + *
+ * @return bool TRUE on success. + */ + public function frameImage ($matte_color, $width, $height, $inner_bevel, $outer_bevel) {} + + /** + * (PECL imagick 2.0.0)+ * The expression. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return Imagick TRUE on success. + */ + public function fxImage ($expression, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * The amount of gamma-correction. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function gammaImage ($gamma, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the Gaussian, in pixels, not counting the center pixel. + *
+ * @param float $sigma+ * The standard deviation of the Gaussian, in pixels. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function gaussianBlurImage ($radius, $sigma, $channel = Imagick::CHANNEL_ALL) {} + + /** + * @param $key + */ + public function getImageAttribute ($key) {} + + /** + * (PECL imagick 2.0.0)+ * Provide any channel constant that is valid for your channel mode. To apply to more than one channel, combine channel constants using bitwise operators. Defaults to Imagick::CHANNEL_DEFAULT. Refer to this list of channel constants + *
+ * @return int TRUE on success. + */ + public function getImageChannelDepth ($channel) {} + + /** + * (PECL imagick 2.0.0)+ * Imagick object to compare to. + *
+ * @param int $channel+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @param int $metric+ * One of the metric type constants. + *
+ * @return float TRUE on success. + */ + public function getImageChannelDistortion (Imagick $reference, $channel, $metric) {} + + /** + * (PECL imagick 2.0.0)+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return array TRUE on success. + */ + public function getImageChannelExtrema ($channel) {} + + /** + * (PECL imagick 2.0.0)+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return array TRUE on success. + */ + public function getImageChannelMean ($channel) {} + + /** + * (PECL imagick 2.0.0)+ * The offset into the image colormap. + *
+ * @return ImagickPixel TRUE on success. + */ + public function getImageColormapColor ($index) {} + + /** + * (PECL imagick 2.0.0)+ * Imagick object to compare to. + *
+ * @param int $metric+ * One of the metric type constants. + *
+ * @return float the distortion metric used on the image (or the best guess + * thereof). + */ + public function getImageDistortion (Imagick $reference, $metric) {} + + /** + * (PECL imagick 2.0.0)+ * The x-coordinate of the pixel + *
+ * @param int $y+ * The y-coordinate of the pixel + *
+ * @return ImagickPixel an ImagickPixel instance for the color at the coordinates given. + */ + public function getImagePixelColor ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * The name of the profile to return. + *
+ * @return string a string containing the image profile. + */ + public function getImageProfile ($name) {} + + /** + * (PECL imagick 2.0.0)+ * The width of the extracted region. + *
+ * @param int $height+ * The height of the extracted region. + *
+ * @param int $x+ * X-coordinate of the top-left corner of the extracted region. + *
+ * @param int $y+ * Y-coordinate of the top-left corner of the extracted region. + *
+ * @return Imagick Extracts a region of the image and returns it as a new wand. + */ + public function getImageRegion ($width, $height, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the implode + *
+ * @return bool TRUE on success. + */ + public function implodeImage ($radius) {} + + /** + * (PECL imagick 2.0.0)+ * The image black point + *
+ * @param float $gamma+ * The gamma value + *
+ * @param float $whitePoint+ * The image white point + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function levelImage ($blackPoint, $gamma, $whitePoint, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * The level of transparency: 1.0 is fully opaque and 0.0 is fully + * transparent. + *
+ * @param float $fuzz+ * The fuzz member of image defines how much tolerance is acceptable to + * consider two colors as the same. + *
+ * @param mixed $bordercolor+ * An ImagickPixel object or string representing the border color. + *
+ * @param int $x+ * The starting x coordinate of the operation. + *
+ * @param int $y+ * The starting y coordinate of the operation. + *
+ * @return bool TRUE on success. + */ + public function matteFloodfillImage ($alpha, $fuzz, $bordercolor, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * The radius of the pixel neighborhood. + *
+ * @return bool TRUE on success. + */ + public function medianFilterImage ($radius) {} + + /** + * (PECL imagick 2.0.0)+ * Whether to only negate grayscale pixels within the image. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function negateImage ($gray, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * Change this target color to the fill color within the image. An + * ImagickPixel object or a string representing the target color. + *
+ * @param mixed $fill+ * An ImagickPixel object or a string representing the fill color. + *
+ * @param float $fuzz+ * The fuzz member of image defines how much tolerance is acceptable to + * consider two colors as the same. + *
+ * @param int $channel [optional]+ * Provide any channel constant that is valid for your channel mode. To + * apply to more than one channel, combine channeltype constants using + * bitwise operators. Refer to this + * list of channel constants. + *
+ * @return bool TRUE on success. + */ + public function paintOpaqueImage ($target, $fill, $fuzz, $channel = Imagick::CHANNEL_ALL) {} + + /** + * (PECL imagick 2.0.0)+ * Change this target color to specified opacity value within the image. + *
+ * @param float $alpha+ * The level of transparency: 1.0 is fully opaque and 0.0 is fully + * transparent. + *
+ * @param float $fuzz+ * The fuzz member of image defines how much tolerance is acceptable to + * consider two colors as the same. + *
+ * @return bool TRUE on success. + */ + public function paintTransparentImage ($target, $alpha, $fuzz) {} + + /** + * (PECL imagick 2.0.0)+ * Preview type. See Preview type constants + *
+ * @return bool TRUE on success. + */ + public function previewImages ($preview) {} + + /** + * (PECL imagick 2.0.0)+ * The border color + *
+ * @return bool TRUE on success. + */ + public function setImageBorderColor ($border) {} + + /** + * (PECL imagick 2.0.0)+ * One of the COLORSPACE constants + *
+ * @return bool TRUE on success. + */ + public function setImageColorspace ($colorspace) {} + + /** + * (PECL imagick 2.0.0)+ * The source Imagick object + *
+ * @return bool TRUE on success. + */ + public function addImage (Imagick $source) {} + + /** + * (PECL imagick 2.0.0)+ * The replace Imagick object + *
+ * @return bool TRUE on success. + */ + public function setImage (Imagick $replace) {} + + /** + * (PECL imagick 2.0.0)+ * Columns in the new image + *
+ * @param int $rows+ * Rows in the new image + *
+ * @param mixed $background+ * The background color used for this image + *
+ * @param string $format [optional]+ * Image format. This parameter was added in Imagick version 2.0.1. + *
+ * @return bool TRUE on success. + */ + public function newImage ($cols, $rows, $background, $format = null) {} + + /** + * (PECL imagick 2.0.0)+ * columns in the new image + *
+ * @param int $rows+ * rows in the new image + *
+ * @param string $pseudoString+ * string containing pseudo image definition. + *
+ * @return bool TRUE on success. + */ + public function newPseudoImage ($columns, $rows, $pseudoString) {} + + /** + * (PECL imagick 2.0.0)+ * The name of the option + *
+ * @return string a value associated with a wand and the specified key. + */ + public function getOption ($key) {} + + /** + * (PECL imagick 2.0.0)+ * Refer to the list of resourcetype constants. + *
+ * @return int the specified resource's memory usage in megabytes. + */ + public static function getResource ($type) {} + + /** + * (PECL imagick 2.0.0)+ * Refer to the list of resourcetype constants. + *
+ * @return int the specified resource limit in megabytes. + */ + public static function getResourceLimit ($type) {} + + /** + * (PECL imagick 2.0.0)+ * Refer to the list of resourcetype constants. + *
+ * @param int $limit+ * The resource limit. The unit depends on the type of the resource being limited. + *
+ * @return bool TRUE on success. + */ + public static function setResourceLimit ($type, $limit) {} + + /** + * (PECL imagick 2.0.0)+ * The horizontal resolution. + *
+ * @param float $y_resolution+ * The vertical resolution. + *
+ * @return bool TRUE on success. + */ + public function setResolution ($x_resolution, $y_resolution) {} + + /** + * (PECL imagick 2.0.0)bool callback ( mixed $offset , mixed $span )+ * Caution + * The values passed to the callback function are not consistent. In particular the span parameter can increase during image processing. Because of this calculating the percentage complete of an image operation is not trivial. + * @return void + * @since 3.3.0 + */ + public function setProgressMonitor ($callback) { } + + /** + * Sets the ImageMagick registry entry named key to value. This is most useful for setting "temporary-path" which controls where ImageMagick creates temporary images e.g. while processing PDFs. + * @link https://php.net/manual/en/imagick.setregistry.php + * @param string $key + * @param string $value + * @return void + * @since 3.3.0 + */ + public static function setRegistry ($key, $value) { } + + /** + * Replace each pixel with corresponding statistic from the neighborhood of the specified width and height. + * @link https://php.net/manual/en/imagick.statisticimage.php + * @param int $type + * @param int $width + * @param int $height + * @param int $channel [optional] + * @return void + * @since 3.3.0 + */ + public function statisticImage ($type, $width, $height, $channel = Imagick::CHANNEL_DEFAULT ) { } + + /** + * Searches for a subimage in the current image and returns a similarity image such that an exact match location is + * completely white and if none of the pixels match, black, otherwise some gray level in-between. + * You can also pass in the optional parameters bestMatch and similarity. After calling the function similarity will + * be set to the 'score' of the similarity between the subimage and the matching position in the larger image, + * bestMatch will contain an associative array with elements x, y, width, height that describe the matching region. + * + * @link https://php.net/manual/en/imagick.subimagematch.php + * @param Imagick $imagick + * @param array $bestMatch [optional] + * @param float $similarity [optional] A new image that displays the amount of similarity at each pixel. + * @param float $similarity_threshold [optional] Only used if compiled with ImageMagick (library) > 7 + * @param int $metric [optional] Only used if compiled with ImageMagick (library) > 7 + * @return Imagick + * @since 3.3.0 + */ + public function subImageMatch (Imagick $imagick, array &$bestMatch, &$similarity, $similarity_threshold, $metric) { } + + /** + * Is an alias of Imagick::subImageMatch + * + * @param Imagick $imagick + * @param array $bestMatch [optional] + * @param float $similarity [optional] A new image that displays the amount of similarity at each pixel. + * @param float $similarity_threshold [optional] + * @param int $metric [optional] + * @return Imagick + * @see Imagick::subImageMatch() This function is an alias of subImageMatch() + * @since 3.4.0 + */ + public function similarityImage (Imagick $imagick, array &$bestMatch, &$similarity, $similarity_threshold, $metric) { } + + /** + * Returns any ImageMagick configure options that match the specified pattern (e.g. "*" for all). Options include NAME, VERSION, LIB_VERSION, etc. + * @return string + * @since 3.4.0 + */ + public function getConfigureOptions () { } + + /** + * GetFeatures() returns the ImageMagick features that have been compiled into the runtime. + * @return string + * @since 3.4.0 + */ + public function getFeatures () { } + + /** + * @return int + * @since 3.4.0 + */ + public function getHDRIEnabled () { } + + /** + * Sets the image channel mask. Returns the previous set channel mask. + * Only works with Imagick >=7 + * @param int $channel + * @since 3.4.0 + */ + public function setImageChannelMask ($channel) {} + + /** + * Merge multiple images of the same size together with the selected operator. https://www.imagemagick.org/Usage/layers/#evaluate-sequence + * @param int $EVALUATE_CONSTANT + * @return bool + * @see https://www.imagemagick.org/Usage/layers/#evaluate-sequence + * @since 3.4.0 + */ + public function evaluateImages ($EVALUATE_CONSTANT) { } + + /** + * Extracts the 'mean' from the image and adjust the image to try make set its gamma appropriately. + * @param int $channel [optional] Default value Imagick::CHANNEL_ALL + * @return bool + * @since 3.4.1 + */ + public function autoGammaImage ($channel = Imagick::CHANNEL_ALL) { } + + /** + * Adjusts an image so that its orientation is suitable $ for viewing (i.e. top-left orientation). + * @return bool + * @since 3.4.1 + */ + public function autoOrient () { } + + /** + * Composite one image onto another using the specified gravity. + * + * @param Imagick $imagick + * @param int $COMPOSITE_CONSTANT + * @param int $GRAVITY_CONSTANT + * @return bool + * @since 3.4.1 + */ + public function compositeImageGravity(Imagick $imagick, $COMPOSITE_CONSTANT, $GRAVITY_CONSTANT) { } + + /** + * Attempts to increase the appearance of large-scale light-dark transitions. + * + * @param float $radius + * @param float $strength + * @return bool + * @since 3.4.1 + */ + public function localContrastImage($radius, $strength) { } + + /** + * Identifies the potential image type, returns one of the Imagick::IMGTYPE_* constants + * @return int + * @since 3.4.3 + */ + public function identifyImageType() { } + + /** + * Sets the image to the specified alpha level. Will replace ImagickDraw::setOpacity() + * + * @param float $alpha + * @return bool + * @since 3.4.3 + */ + public function setImageAlpha($alpha) { } +} + +/** + * @method ImagickDraw clone() (PECL imagick 2.0.0)
+ * ImagickPixel to use to set the color + *
+ * @return bool No value is returned. + */ + public function setFillColor (ImagickPixel $fill_pixel) {} + + /** + * (PECL imagick 2.0.0)+ * fill alpha + *
+ * @return bool No value is returned. + */ + public function setFillAlpha ($opacity) {} + + /** + * @param $x_resolution + * @param $y_resolution + */ + public function setResolution ($x_resolution, $y_resolution) {} + + /** + * (PECL imagick 2.0.0)+ * the stroke color + *
+ * @return bool No value is returned. + */ + public function setStrokeColor (ImagickPixel $stroke_pixel) {} + + /** + * (PECL imagick 2.0.0)+ * opacity + *
+ * @return bool No value is returned. + */ + public function setStrokeAlpha ($opacity) {} + + /** + * (PECL imagick 2.0.0)+ * stroke width + *
+ * @return bool No value is returned. + */ + public function setStrokeWidth ($stroke_width) {} + + /** + * (PECL imagick 2.0.0)+ * origin x coordinate + *
+ * @param float $oy+ * origin y coordinate + *
+ * @param float $px+ * perimeter x coordinate + *
+ * @param float $py+ * perimeter y coordinate + *
+ * @return bool No value is returned. + */ + public function circle ($ox, $oy, $px, $py) {} + + /** + * (PECL imagick 2.0.0)+ * The x coordinate where text is drawn + *
+ * @param float $y+ * The y coordinate where text is drawn + *
+ * @param string $text+ * The text to draw on the image + *
+ * @return bool No value is returned. + */ + public function annotation ($x, $y, $text) {} + + /** + * (PECL imagick 2.0.0)+ * the encoding name + *
+ * @return bool No value is returned. + */ + public function setTextEncoding ($encoding) {} + + /** + * (PECL imagick 2.0.0)+ * the font family + *
+ * @return bool TRUE on success. + */ + public function setFontFamily ($font_family) {} + + /** + * (PECL imagick 2.0.0)+ * the point size + *
+ * @return bool No value is returned. + */ + public function setFontSize ($pointsize) {} + + /** + * (PECL imagick 2.0.0)+ * STYLETYPE_ constant + *
+ * @return bool No value is returned. + */ + public function setFontStyle ($style) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the top left corner + *
+ * @param float $y1+ * y coordinate of the top left corner + *
+ * @param float $x2+ * x coordinate of the bottom right corner + *
+ * @param float $y2+ * y coordinate of the bottom right corner + *
+ * @return bool No value is returned. + */ + public function rectangle ($x1, $y1, $x2, $y2) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the top left corner + *
+ * @param float $y1+ * y coordinate of the top left corner + *
+ * @param float $x2+ * x coordinate of the bottom right + *
+ * @param float $y2+ * y coordinate of the bottom right + *
+ * @param float $rx+ * x rounding + *
+ * @param float $ry+ * y rounding + *
+ * @return bool No value is returned. + */ + public function roundRectangle ($x1, $y1, $x2, $y2, $rx, $ry) {} + + /** + * (PECL imagick 2.0.0)+ * degrees to skew + *
+ * @return bool No value is returned. + */ + public function skewX ($degrees) {} + + /** + * (PECL imagick 2.0.0)+ * degrees to skew + *
+ * @return bool No value is returned. + */ + public function skewY ($degrees) {} + + /** + * (PECL imagick 2.0.0)+ * horizontal translation + *
+ * @param float $y+ * vertical translation + *
+ * @return bool No value is returned. + */ + public function translate ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * starting x coordinate + *
+ * @param float $sy+ * starting y coordinate + *
+ * @param float $ex+ * ending x coordinate + *
+ * @param float $ey+ * ending y coordinate + *
+ * @return bool No value is returned. + */ + public function line ($sx, $sy, $ex, $ey) {} + + /** + * (PECL imagick 2.0.0)+ * Starting x ordinate of bounding rectangle + *
+ * @param float $sy+ * starting y ordinate of bounding rectangle + *
+ * @param float $ex+ * ending x ordinate of bounding rectangle + *
+ * @param float $ey+ * ending y ordinate of bounding rectangle + *
+ * @param float $sd+ * starting degrees of rotation + *
+ * @param float $ed+ * ending degrees of rotation + *
+ * @return bool No value is returned. + */ + public function arc ($sx, $sy, $ex, $ey, $sd, $ed) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the matte + *
+ * @param float $y+ * y coordinate of the matte + *
+ * @param int $paintMethod+ * PAINT_ constant + *
+ * @return bool TRUE on success or FALSE on failure. + */ + public function matte ($x, $y, $paintMethod) {} + + /** + * (PECL imagick 2.0.0)+ * multidimensional array like array( array( 'x' => 3, 'y' => 4 ), array( 'x' => 2, 'y' => 6 ) ); + *
+ * @return bool TRUE on success. + */ + public function polygon (array $coordinates) {} + + /** + * (PECL imagick 2.0.0)+ * point's x coordinate + *
+ * @param float $y+ * point's y coordinate + *
+ * @return bool No value is returned. + */ + public function point ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * STRETCH_ constant + *
+ * @return bool No value is returned. + */ + public function setFontStretch ($fontStretch) {} + + /** + * (PECL imagick 2.0.0)+ * the antialias setting + *
+ * @return bool No value is returned. + */ + public function setStrokeAntialias ($stroke_antialias) {} + + /** + * (PECL imagick 2.0.0)+ * ALIGN_ constant + *
+ * @return bool No value is returned. + */ + public function setTextAlignment ($alignment) {} + + /** + * (PECL imagick 2.0.0)+ * DECORATION_ constant + *
+ * @return bool No value is returned. + */ + public function setTextDecoration ($decoration) {} + + /** + * (PECL imagick 2.0.0)+ * the under color + *
+ * @return bool No value is returned. + */ + public function setTextUnderColor (ImagickPixel $under_color) {} + + /** + * (PECL imagick 2.0.0)+ * left x coordinate + *
+ * @param int $y1+ * left y coordinate + *
+ * @param int $x2+ * right x coordinate + *
+ * @param int $y2+ * right y coordinate + *
+ * @return bool No value is returned. + */ + public function setViewbox ($x1, $y1, $x2, $y2) {} + + /** + * (PECL imagick 2.0.0)+ * Affine matrix parameters + *
+ * @return bool No value is returned. + */ + public function affine (array $affine) {} + + /** + * (PECL imagick 2.0.0)+ * Multidimensional array like array( array( 'x' => 1, 'y' => 2 ), + * array( 'x' => 3, 'y' => 4 ) ) + *
+ * @return bool No value is returned. + */ + public function bezier (array $coordinates) {} + + /** + * (PECL imagick 2.0.0)+ * composition operator. One of COMPOSITE_ constants + *
+ * @param float $x+ * x coordinate of the top left corner + *
+ * @param float $y+ * y coordinate of the top left corner + *
+ * @param float $width+ * width of the composition image + *
+ * @param float $height+ * height of the composition image + *
+ * @param Imagick $compositeWand+ * the Imagick object where composition image is taken from + *
+ * @return bool TRUE on success. + */ + public function composite ($compose, $x, $y, $width, $height, Imagick $compositeWand) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the paint + *
+ * @param float $y+ * y coordinate of the paint + *
+ * @param int $paintMethod+ * one of the PAINT_ constants + *
+ * @return bool No value is returned. + */ + public function color ($x, $y, $paintMethod) {} + + /** + * (PECL imagick 2.0.0)+ * The comment string to add to vector output stream + *
+ * @return bool No value is returned. + */ + public function comment ($comment) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the first control point + *
+ * @param float $y1+ * y coordinate of the first control point + *
+ * @param float $x2+ * x coordinate of the second control point + *
+ * @param float $y2+ * y coordinate of the first control point + *
+ * @param float $x+ * x coordinate of the curve end + *
+ * @param float $y+ * y coordinate of the curve end + *
+ * @return bool No value is returned. + */ + public function pathCurveToAbsolute ($x1, $y1, $x2, $y2, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of starting control point + *
+ * @param float $y1+ * y coordinate of starting control point + *
+ * @param float $x2+ * x coordinate of ending control point + *
+ * @param float $y2+ * y coordinate of ending control point + *
+ * @param float $x+ * ending x coordinate + *
+ * @param float $y+ * ending y coordinate + *
+ * @return bool No value is returned. + */ + public function pathCurveToRelative ($x1, $y1, $x2, $y2, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the control point + *
+ * @param float $y1+ * y coordinate of the control point + *
+ * @param float $x+ * x coordinate of the end point + *
+ * @param float $y+ * y coordinate of the end point + *
+ * @return bool No value is returned. + */ + public function pathCurveToQuadraticBezierAbsolute ($x1, $y1, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * starting x coordinate + *
+ * @param float $y1+ * starting y coordinate + *
+ * @param float $x+ * ending x coordinate + *
+ * @param float $y+ * ending y coordinate + *
+ * @return bool No value is returned. + */ + public function pathCurveToQuadraticBezierRelative ($x1, $y1, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * ending x coordinate + *
+ * @param float $y+ * ending y coordinate + *
+ * @return bool No value is returned. + */ + public function pathCurveToQuadraticBezierSmoothAbsolute ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * ending x coordinate + *
+ * @param float $y+ * ending y coordinate + *
+ * @return bool No value is returned. + */ + public function pathCurveToQuadraticBezierSmoothRelative ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the second control point + *
+ * @param float $y2+ * y coordinate of the second control point + *
+ * @param float $x+ * x coordinate of the ending point + *
+ * @param float $y+ * y coordinate of the ending point + *
+ * @return bool No value is returned. + */ + public function pathCurveToSmoothAbsolute ($x2, $y2, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the second control point + *
+ * @param float $y2+ * y coordinate of the second control point + *
+ * @param float $x+ * x coordinate of the ending point + *
+ * @param float $y+ * y coordinate of the ending point + *
+ * @return bool No value is returned. + */ + public function pathCurveToSmoothRelative ($x2, $y2, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * x radius + *
+ * @param float $ry+ * y radius + *
+ * @param float $x_axis_rotation+ * x axis rotation + *
+ * @param bool $large_arc_flag+ * large arc flag + *
+ * @param bool $sweep_flag+ * sweep flag + *
+ * @param float $x+ * x coordinate + *
+ * @param float $y+ * y coordinate + *
+ * @return bool No value is returned. + */ + public function pathEllipticArcAbsolute ($rx, $ry, $x_axis_rotation, $large_arc_flag, $sweep_flag, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * x radius + *
+ * @param float $ry+ * y radius + *
+ * @param float $x_axis_rotation+ * x axis rotation + *
+ * @param bool $large_arc_flag+ * large arc flag + *
+ * @param bool $sweep_flag+ * sweep flag + *
+ * @param float $x+ * x coordinate + *
+ * @param float $y+ * y coordinate + *
+ * @return bool No value is returned. + */ + public function pathEllipticArcRelative ($rx, $ry, $x_axis_rotation, $large_arc_flag, $sweep_flag, $x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * starting x coordinate + *
+ * @param float $y+ * ending x coordinate + *
+ * @return bool No value is returned. + */ + public function pathLineToAbsolute ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * starting x coordinate + *
+ * @param float $y+ * starting y coordinate + *
+ * @return bool No value is returned. + */ + public function pathLineToRelative ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate + *
+ * @return bool No value is returned. + */ + public function pathLineToHorizontalAbsolute ($x) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate + *
+ * @return bool No value is returned. + */ + public function pathLineToHorizontalRelative ($x) {} + + /** + * (PECL imagick 2.0.0)+ * y coordinate + *
+ * @return bool No value is returned. + */ + public function pathLineToVerticalAbsolute ($y) {} + + /** + * (PECL imagick 2.0.0)+ * y coordinate + *
+ * @return bool No value is returned. + */ + public function pathLineToVerticalRelative ($y) {} + + /** + * (PECL imagick 2.0.0)+ * x coordinate of the starting point + *
+ * @param float $y+ * y coordinate of the starting point + *
+ * @return bool No value is returned. + */ + public function pathMoveToAbsolute ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * target x coordinate + *
+ * @param float $y+ * target y coordinate + *
+ * @return bool No value is returned. + */ + public function pathMoveToRelative ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * array of x and y coordinates: array( array( 'x' => 4, 'y' => 6 ), array( 'x' => 8, 'y' => 10 ) ) + *
+ * @return bool TRUE on success. + */ + public function polyline (array $coordinates) {} + + /** + * (PECL imagick 2.0.0)+ * Clip mask Id + *
+ * @return bool No value is returned. + */ + public function pushClipPath ($clip_mask_id) {} + + /** + * (PECL imagick 2.0.0)+ * the pattern Id + *
+ * @param float $x+ * x coordinate of the top-left corner + *
+ * @param float $y+ * y coordinate of the top-left corner + *
+ * @param float $width+ * width of the pattern + *
+ * @param float $height+ * height of the pattern + *
+ * @return bool TRUE on success or FALSE on failure. + */ + public function pushPattern ($pattern_id, $x, $y, $width, $height) {} + + /** + * (PECL imagick 2.0.0)+ * degrees to rotate + *
+ * @return bool No value is returned. + */ + public function rotate ($degrees) {} + + /** + * (PECL imagick 2.0.0)+ * horizontal factor + *
+ * @param float $y+ * vertical factor + *
+ * @return bool No value is returned. + */ + public function scale ($x, $y) {} + + /** + * (PECL imagick 2.0.0)+ * the clipping path name + *
+ * @return bool No value is returned. + */ + public function setClipPath ($clip_mask) {} + + /** + * (PECL imagick 2.0.0)+ * FILLRULE_ constant + *
+ * @return bool No value is returned. + */ + public function setClipRule ($fill_rule) {} + + /** + * (PECL imagick 2.0.0)+ * the number of clip units + *
+ * @return bool No value is returned. + */ + public function setClipUnits ($clip_units) {} + + /** + * (PECL imagick 2.0.0)+ * the fill opacity + *
+ * @return bool No value is returned. + */ + public function setFillOpacity ($fillOpacity) {} + + /** + * (PECL imagick 2.0.0)+ * URL to use to obtain fill pattern. + *
+ * @return bool TRUE on success or FALSE on failure. + */ + public function setFillPatternURL ($fill_url) {} + + /** + * (PECL imagick 2.0.0)+ * FILLRULE_ constant + *
+ * @return bool No value is returned. + */ + public function setFillRule ($fill_rule) {} + + /** + * (PECL imagick 2.0.0)+ * GRAVITY_ constant + *
+ * @return bool No value is returned. + */ + public function setGravity ($gravity) {} + + /** + * (PECL imagick 2.0.0)+ * stroke URL + *
+ * @return bool imagick.imagickdraw.return.success; + */ + public function setStrokePatternURL ($stroke_url) {} + + /** + * (PECL imagick 2.0.0)+ * dash offset + *
+ * @return bool No value is returned. + */ + public function setStrokeDashOffset ($dash_offset) {} + + /** + * (PECL imagick 2.0.0)+ * LINECAP_ constant + *
+ * @return bool No value is returned. + */ + public function setStrokeLineCap ($linecap) {} + + /** + * (PECL imagick 2.0.0)+ * LINEJOIN_ constant + *
+ * @return bool No value is returned. + */ + public function setStrokeLineJoin ($linejoin) {} + + /** + * (PECL imagick 2.0.0)+ * the miter limit + *
+ * @return bool No value is returned. + */ + public function setStrokeMiterLimit ($miterlimit) {} + + /** + * (PECL imagick 2.0.0)+ * stroke opacity. 1.0 is fully opaque + *
+ * @return bool No value is returned. + */ + public function setStrokeOpacity ($stroke_opacity) {} + + /** + * (PECL imagick 2.0.0)+ * xml containing the vector graphics + *
+ * @return bool TRUE on success or FALSE on failure. + */ + public function setVectorGraphics ($xml) {} + + /** + * (PECL imagick 2.0.0)+ * array of floats + *
+ * @return bool TRUE on success. + */ + public function setStrokeDashArray (array $dashArray) {} + + /** + * Sets the opacity to use when drawing using the fill or stroke color or texture. Fully opaque is 1.0. + * + * @param float $opacity + * @return void + * @since 3.4.1 + */ + public function setOpacity($opacity) { } + + /** + * Returns the opacity used when drawing with the fill or stroke color or texture. Fully opaque is 1.0. + * + * @return float + * @since 3.4.1 + */ + public function getOpacity() { } + + /** + * Sets the image font resolution. + * + * @param float $x + * @param float $y + * @return bool + * @since 3.4.1 + */ + public function setFontResolution($x, $y) { } + + /** + * Gets the image X and Y resolution. + * + * @return array + * @since 3.4.1 + */ + public function getFontResolution() { } + + /** + * Returns the direction that will be used when annotating with text. + * @return bool + * @since 3.4.1 + */ + public function getTextDirection() { } + + /** + * Sets the font style to use when annotating with text. The AnyStyle enumeration acts as a wild-card "don't care" option. + * + * @param int $direction + * @return bool + * @since 3.4.1 + */ + public function setTextDirection($direction) { } + + /** + * Returns the border color used for drawing bordered objects. + * + * @return ImagickPixel + * @since 3.4.1 + */ + public function getBorderColor() { } + + /** + * Sets the border color to be used for drawing bordered objects. + * @param ImagickPixel $color + * @return bool + * @since 3.4.1 + */ + public function setBorderColor(ImagickPixel $color) { } + + /** + * Obtains the vertical and horizontal resolution. + * + * @return string|null + * @since 3.4.1 + */ + public function getDensity() { } + + /** + * Sets the vertical and horizontal resolution. + * @param string $density_string + * @return bool + * @since 3.4.1 + */ + public function setDensity($density_string) { } +} + +/** + * @link https://php.net/manual/en/class.imagickpixeliterator.php + */ +class ImagickPixelIterator implements Iterator { + + /** + * (PECL imagick 2.0.0)+ * The normalized value for hue, described as a fractional arc + * (between 0 and 1) of the hue circle, where the zero value is + * red. + *
+ * @param float $saturation+ * The normalized value for saturation, with 1 as full saturation. + *
+ * @param float $luminosity+ * The normalized value for luminosity, on a scale from black at + * 0 to white at 1, with the full HS value at 0.5 luminosity. + *
+ * @return bool TRUE on success. + */ + public function setHSL ($hue, $saturation, $luminosity) {} + + public function getColorValueQuantum () {} + + /** + * @param $color_value + */ + public function setColorValueQuantum ($color_value) {} + + public function getIndex () {} + + /** + * @param $index + */ + public function setIndex ($index) {} + + /** + * (PECL imagick 2.0.0)+ * The optional color string to use as the initial value of this object. + *
+ */ + public function __construct ($color = null) {} + + /** + * (PECL imagick 2.0.0)+ * The color definition to use in order to initialise the + * ImagickPixel object. + *
+ * @return bool TRUE if the specified color was set, FALSE otherwise. + */ + public function setColor ($color) {} + + /** + * (PECL imagick 2.0.0)+ * One of the Imagick color constants e.g. \Imagick::COLOR_GREEN or \Imagick::COLOR_ALPHA. + *
+ * @param float $value+ * The value to set this channel to, ranging from 0 to 1. + *
+ * @return bool TRUE on success. + */ + public function setColorValue ($color, $value) {} + + /** + * (PECL imagick 2.0.0)+ * The color to get the value of, specified as one of the Imagick color + * constants. This can be one of the RGB colors, CMYK colors, alpha and + * opacity e.g (Imagick::COLOR_BLUE, Imagick::COLOR_MAGENTA). + *
+ * @return float The value of the channel, as a normalized floating-point number, throwing + * ImagickPixelException on error. + * @throws ImagickPixelException on error + */ + public function getColorValue ($color) {} + + /** + * (PECL imagick 2.0.0)+ * The ImagickPixel object to compare this object against. + *
+ * @param float $fuzz+ * The maximum distance within which to consider these colors as similar. + * The theoretical maximum for this value is the square root of three + * (1.732). + *
+ * @return bool TRUE on success. + */ + public function isSimilar (ImagickPixel $color, $fuzz) {} + + /** + * (No version information available, might only be in SVN)+ * The ImagickPixel object to compare this object against. + *
+ * @param float $fuzz+ * The maximum distance within which to consider these colors as similar. + * The theoretical maximum for this value is the square root of three + * (1.732). + *
+ * @return bool TRUE on success. + */ + public function isPixelSimilar (ImagickPixel $color, $fuzz) {} + + /** + * (PECL imagick 2.0.0)+ * Normalize the color values + *
+ * @return array An array of channel values, each normalized if TRUE is given as param. Throws + * ImagickPixelException on error. + * @throws ImagickPixelException on error. + */ + public function getColor ($normalized = false) {} + + /** + * (PECL imagick 2.1.0)Type: boolean, default: TRUE.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_COMPRESSION = -1001; + const OPT_COMPRESSION_TYPE = -1004; + + /** + *This can be used to create a "domain" for your item keys. The value + * specified here will be prefixed to each of the keys. It cannot be + * longer than 128 characters and will reduce the + * maximum available key size. The prefix is applied only to the item keys, + * not to the server keys.
+ *Type: string, default: "".
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_PREFIX_KEY = -1002; + + /** + *+ * Specifies the serializer to use for serializing non-scalar values. + * The valid serializers are Memcached::SERIALIZER_PHP + * or Memcached::SERIALIZER_IGBINARY. The latter is + * supported only when memcached is configured with + * --enable-memcached-igbinary option and the + * igbinary extension is loaded. + *
+ *Type: integer, default: Memcached::SERIALIZER_PHP.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_SERIALIZER = -1003; + + /** + *Indicates whether igbinary serializer support is available.
+ *Type: boolean.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HAVE_IGBINARY = 0; + + /** + *Indicates whether JSON serializer support is available.
+ *Type: boolean.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HAVE_JSON = 0; + + /** + *Indicates whether msgpack serializer support is available.
+ *Type: boolean.
+ * Available as of Memcached 3.0.0. + * @since 3.0.0 + * @link https://php.net/manual/en/memcached.constants.php + */ + const HAVE_MSGPACK = 0; + + /** + *Indicate whether set_encoding_key is available
+ *Type: boolean.
+ * @link https://github.com/php-memcached-dev/php-memcached/blob/v3.1.5/memcached-api.php, https://github.com/php-memcached-dev/php-memcached/blob/v3.1.5/php_memcached.c#L4387 + */ + const HAVE_ENCODING = 0; + + /** + * Feature support + */ + const HAVE_SESSION = 1; + const HAVE_SASL = 0; + + /** + *Specifies the hashing algorithm used for the item keys. The valid + * values are supplied via Memcached::HASH_* constants. + * Each hash algorithm has its advantages and its disadvantages. Go with the + * default if you don't know or don't care.
+ *Type: integer, default: Memcached::HASH_DEFAULT
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_HASH = 2; + + /** + *The default (Jenkins one-at-a-time) item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_DEFAULT = 0; + + /** + *MD5 item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_MD5 = 1; + + /** + *CRC item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_CRC = 2; + + /** + *FNV1_64 item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_FNV1_64 = 3; + + /** + *FNV1_64A item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_FNV1A_64 = 4; + + /** + *FNV1_32 item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_FNV1_32 = 5; + + /** + *FNV1_32A item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_FNV1A_32 = 6; + + /** + *Hsieh item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_HSIEH = 7; + + /** + *Murmur item key hashing algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const HASH_MURMUR = 8; + + /** + *Specifies the method of distributing item keys to the servers. + * Currently supported methods are modulo and consistent hashing. Consistent + * hashing delivers better distribution and allows servers to be added to + * the cluster with minimal cache losses.
+ *Type: integer, default: Memcached::DISTRIBUTION_MODULA.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_DISTRIBUTION = 9; + + /** + *Modulo-based key distribution algorithm.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const DISTRIBUTION_MODULA = 0; + + /** + *Consistent hashing key distribution algorithm (based on libketama).
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const DISTRIBUTION_CONSISTENT = 1; + const DISTRIBUTION_VIRTUAL_BUCKET = 6; + + /** + *Enables or disables compatibility with libketama-like behavior. When + * enabled, the item key hashing algorithm is set to MD5 and distribution is + * set to be weighted consistent hashing distribution. This is useful + * because other libketama-based clients (Python, Ruby, etc.) with the same + * server configuration will be able to access the keys transparently. + *
+ *+ * It is highly recommended to enable this option if you want to use + * consistent hashing, and it may be enabled by default in future + * releases. + *
+ *Type: boolean, default: FALSE.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_LIBKETAMA_COMPATIBLE = 16; + const OPT_LIBKETAMA_HASH = 17; + const OPT_TCP_KEEPALIVE = 32; + + /** + *Enables or disables buffered I/O. Enabling buffered I/O causes + * storage commands to "buffer" instead of being sent. Any action that + * retrieves data causes this buffer to be sent to the remote connection. + * Quitting the connection or closing down the connection will also cause + * the buffered data to be pushed to the remote connection.
+ *Type: boolean, default: FALSE.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_BUFFER_WRITES = 10; + + /** + *Enable the use of the binary protocol. Please note that you cannot + * toggle this option on an open connection.
+ *Type: boolean, default: FALSE.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_BINARY_PROTOCOL = 18; + + /** + *Enables or disables asynchronous I/O. This is the fastest transport + * available for storage functions.
+ *Type: boolean, default: FALSE.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_NO_BLOCK = 0; + + /** + *Enables or disables the no-delay feature for connecting sockets (may + * be faster in some environments).
+ *Type: boolean, default: FALSE.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_TCP_NODELAY = 1; + + /** + *The maximum socket send buffer in bytes.
+ *Type: integer, default: varies by platform/kernel + * configuration.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_SOCKET_SEND_SIZE = 4; + + /** + *The maximum socket receive buffer in bytes.
+ *Type: integer, default: varies by platform/kernel + * configuration.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_SOCKET_RECV_SIZE = 5; + + /** + *In non-blocking mode this set the value of the timeout during socket + * connection, in milliseconds.
+ *Type: integer, default: 1000.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_CONNECT_TIMEOUT = 14; + + /** + *The amount of time, in seconds, to wait until retrying a failed + * connection attempt.
+ *Type: integer, default: 0.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_RETRY_TIMEOUT = 15; + + /** + *Socket sending timeout, in microseconds. In cases where you cannot + * use non-blocking I/O this will allow you to still have timeouts on the + * sending of data.
+ *Type: integer, default: 0.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_SEND_TIMEOUT = 19; + + /** + *Socket reading timeout, in microseconds. In cases where you cannot + * use non-blocking I/O this will allow you to still have timeouts on the + * reading of data.
+ *Type: integer, default: 0.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_RECV_TIMEOUT = 20; + + /** + *Timeout for connection polling, in milliseconds.
+ *Type: integer, default: 1000.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_POLL_TIMEOUT = 8; + + /** + *Enables or disables caching of DNS lookups.
+ *Type: boolean, default: FALSE.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_CACHE_LOOKUPS = 6; + + /** + *Specifies the failure limit for server connection attempts. The + * server will be removed after this many continuous connection + * failures.
+ *Type: integer, default: 0.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const OPT_SERVER_FAILURE_LIMIT = 21; + const OPT_AUTO_EJECT_HOSTS = 28; + const OPT_HASH_WITH_PREFIX_KEY = 25; + const OPT_NOREPLY = 26; + const OPT_SORT_HOSTS = 12; + const OPT_VERIFY_KEY = 13; + const OPT_USE_UDP = 27; + const OPT_NUMBER_OF_REPLICAS = 29; + const OPT_RANDOMIZE_REPLICA_READ = 30; + const OPT_CORK = 31; + const OPT_REMOVE_FAILED_SERVERS = 35; + const OPT_DEAD_TIMEOUT = 36; + const OPT_SERVER_TIMEOUT_LIMIT = 37; + const OPT_MAX = 38; + const OPT_IO_BYTES_WATERMARK = 23; + const OPT_IO_KEY_PREFETCH = 24; + const OPT_IO_MSG_WATERMARK = 22; + const OPT_LOAD_FROM_FILE = 34; + const OPT_SUPPORT_CAS = 7; + const OPT_TCP_KEEPIDLE = 33; + const OPT_USER_DATA = 11; + + + /** + * libmemcached result codes + */ + /** + *The operation was successful.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_SUCCESS = 0; + + /** + *The operation failed in some fashion.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_FAILURE = 1; + + /** + *DNS lookup failed.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_HOST_LOOKUP_FAILURE = 2; + + /** + *Failed to read network data.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_UNKNOWN_READ_FAILURE = 7; + + /** + *Bad command in memcached protocol.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_PROTOCOL_ERROR = 8; + + /** + *Error on the client side.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_CLIENT_ERROR = 9; + + /** + *Error on the server side.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_SERVER_ERROR = 10; + + /** + *Failed to write network data.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_WRITE_FAILURE = 5; + + /** + *Failed to do compare-and-swap: item you are trying to store has been + * modified since you last fetched it.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_DATA_EXISTS = 12; + + /** + *Item was not stored: but not because of an error. This normally + * means that either the condition for an "add" or a "replace" command + * wasn't met, or that the item is in a delete queue.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_NOTSTORED = 14; + + /** + *Item with this key was not found (with "get" operation or "cas" + * operations).
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_NOTFOUND = 16; + + /** + *Partial network data read error.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_PARTIAL_READ = 18; + + /** + *Some errors occurred during multi-get.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_SOME_ERRORS = 19; + + /** + *Server list is empty.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_NO_SERVERS = 20; + + /** + *End of result set.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_END = 21; + + /** + *System error.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_ERRNO = 26; + + /** + *The operation was buffered.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_BUFFERED = 32; + + /** + *The operation timed out.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_TIMEOUT = 31; + + /** + *Bad key.
+ * @link https://php.net/manual/en/memcached.constants.php, http://docs.libmemcached.org/index.html + */ + /** + *MEMCACHED_BAD_KEY_PROVIDED: The key provided is not a valid key.
+ */ + const RES_BAD_KEY_PROVIDED = 33; + /** + *MEMCACHED_STORED: The requested object has been successfully stored on the server.
+ */ + const RES_STORED = 15; + /** + *MEMCACHED_DELETED: The object requested by the key has been deleted.
+ */ + const RES_DELETED = 22; + /** + *MEMCACHED_STAT: A “stat” command has been returned in the protocol.
+ */ + const RES_STAT = 24; + /** + *MEMCACHED_ITEM: An item has been fetched (this is an internal error only).
+ */ + const RES_ITEM = 25; + /** + *MEMCACHED_NOT_SUPPORTED: The given method is not supported in the server.
+ */ + const RES_NOT_SUPPORTED = 28; + /** + *MEMCACHED_FETCH_NOTFINISHED: A request has been made, but the server has not finished the fetch of the last request.
+ */ + const RES_FETCH_NOTFINISHED = 30; + /** + *MEMCACHED_SERVER_MARKED_DEAD: The requested server has been marked dead.
+ */ + const RES_SERVER_MARKED_DEAD = 35; + /** + *MEMCACHED_UNKNOWN_STAT_KEY: The server you are communicating with has a stat key which has not be defined in the protocol.
+ */ + const RES_UNKNOWN_STAT_KEY = 36; + /** + *MEMCACHED_INVALID_HOST_PROTOCOL: The server you are connecting too has an invalid protocol. Most likely you are connecting to an older server that does not speak the binary protocol.
+ */ + const RES_INVALID_HOST_PROTOCOL = 34; + /** + *MEMCACHED_MEMORY_ALLOCATION_FAILURE: An error has occurred while trying to allocate memory.
+ */ + const RES_MEMORY_ALLOCATION_FAILURE = 17; + /** + *MEMCACHED_E2BIG: Item is too large for the server to store.
+ */ + const RES_E2BIG = 37; + /** + *MEMCACHED_KEY_TOO_BIG: The key that has been provided is too large for the given server.
+ */ + const RES_KEY_TOO_BIG = 39; + /** + *MEMCACHED_SERVER_TEMPORARILY_DISABLED
+ */ + const RES_SERVER_TEMPORARILY_DISABLED = 47; + /** + *MEMORY_ALLOCATION_FAILURE: An error has occurred while trying to allocate memory. + * + * #if defined(LIBMEMCACHED_VERSION_HEX) && LIBMEMCACHED_VERSION_HEX >= 0x01000008
+ */ + const RES_SERVER_MEMORY_ALLOCATION_FAILURE = 48; + /** + *MEMCACHED_AUTH_PROBLEM: An unknown issue has occured during authentication.
+ */ + const RES_AUTH_PROBLEM = 40; + /** + *MEMCACHED_AUTH_FAILURE: The credentials provided are not valid for this server.
+ */ + const RES_AUTH_FAILURE = 41; + /** + *MEMCACHED_AUTH_CONTINUE: Authentication has been paused.
+ */ + const RES_AUTH_CONTINUE = 42; + /** + *MEMCACHED_CONNECTION_FAILURE: A unknown error has occured while trying to connect to a server.
+ */ + const RES_CONNECTION_FAILURE = 3; + /** + *MEMCACHED_CONNECTION_BIND_FAILURE: Deprecated since version <0.30(libmemcached). + * We were not able to bind() to the socket.
+ */ + const RES_CONNECTION_BIND_FAILURE = 4; + /** + *MEMCACHED_READ_FAILURE: A read failure has occurred.
+ */ + const RES_READ_FAILURE = 6; + /** + *MEMCACHED_DATA_DOES_NOT_EXIST: The data requested with the key given was not found.
+ */ + const RES_DATA_DOES_NOT_EXIST = 13; + /** + *MEMCACHED_VALUE: A value has been returned from the server (this is an internal condition only).
+ */ + const RES_VALUE = 23; + /** + *MEMCACHED_FAIL_UNIX_SOCKET: A connection was not established with the server via a unix domain socket.
+ */ + const RES_FAIL_UNIX_SOCKET = 27; + /** + *MEMCACHED_NO_KEY_PROVIDED: Deprecated since version <0.30(libmemcached): Use MEMCACHED_BAD_KEY_PROVIDED instead. + * No key was provided.
+ */ + const RES_NO_KEY_PROVIDED = 29; + /** + *MEMCACHED_INVALID_ARGUMENTS: The arguments supplied to the given function were not valid.
+ */ + const RES_INVALID_ARGUMENTS = 38; + /** + *MEMCACHED_PARSE_ERROR: An error has occurred while trying to parse the configuration string. You should use memparse to determine what the error was.
+ */ + const RES_PARSE_ERROR = 43; + /** + *MEMCACHED_PARSE_USER_ERROR: An error has occurred in parsing the configuration string.
+ */ + const RES_PARSE_USER_ERROR = 44; + /** + *MEMCACHED_DEPRECATED: The method that was requested has been deprecated.
+ */ + const RES_DEPRECATED = 45; + //unknow + const RES_IN_PROGRESS = 46; + /** + *MEMCACHED_MAXIMUM_RETURN: This in an internal only state.
+ */ + const RES_MAXIMUM_RETURN = 49; + + /** + * Server callbacks, if compiled with --memcached-protocol + * @link https://github.com/php-memcached-dev/php-memcached/blob/v3.1.5/memcached-api.php + */ + const ON_CONNECT = 0; + const ON_ADD = 1; + const ON_APPEND = 2; + const ON_DECREMENT = 3; + const ON_DELETE = 4; + const ON_FLUSH = 5; + const ON_GET = 6; + const ON_INCREMENT = 7; + const ON_NOOP = 8; + const ON_PREPEND = 9; + const ON_QUIT = 10; + const ON_REPLACE = 11; + const ON_SET = 12; + const ON_STAT = 13; + const ON_VERSION = 14; + /** + * Constants used when compiled with --memcached-protocol + * @link https://github.com/php-memcached-dev/php-memcached/blob/v3.1.5/memcached-api.php + */ + const RESPONSE_SUCCESS = 0; + const RESPONSE_KEY_ENOENT = 1; + const RESPONSE_KEY_EEXISTS = 2; + const RESPONSE_E2BIG = 3; + const RESPONSE_EINVAL = 4; + const RESPONSE_NOT_STORED = 5; + const RESPONSE_DELTA_BADVAL = 6; + const RESPONSE_NOT_MY_VBUCKET = 7; + const RESPONSE_AUTH_ERROR = 32; + const RESPONSE_AUTH_CONTINUE = 33; + const RESPONSE_UNKNOWN_COMMAND = 129; + const RESPONSE_ENOMEM = 130; + const RESPONSE_NOT_SUPPORTED = 131; + const RESPONSE_EINTERNAL = 132; + const RESPONSE_EBUSY = 133; + const RESPONSE_ETMPFAIL = 134; + + + /** + *Failed to create network socket.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_CONNECTION_SOCKET_CREATE_FAILURE = 11; + + /** + *Payload failure: could not compress/decompress or serialize/unserialize the value.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const RES_PAYLOAD_FAILURE = -1001; + + /** + *The default PHP serializer.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const SERIALIZER_PHP = 1; + + /** + *The igbinary serializer. + * Instead of textual representation it stores PHP data structures in a + * compact binary form, resulting in space and time gains.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const SERIALIZER_IGBINARY = 2; + + /** + *The JSON serializer. Requires PHP 5.2.10+.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const SERIALIZER_JSON = 3; + const SERIALIZER_JSON_ARRAY = 4; + /** + *The msgpack serializer.
+ * @link https://github.com/php-memcached-dev/php-memcached/blob/v3.1.5/memcached-api.php + */ + const SERIALIZER_MSGPACK = 5; + + const COMPRESSION_FASTLZ = 2; + const COMPRESSION_ZLIB = 1; + + /** + *A flag for Memcached::getMulti and + * Memcached::getMultiByKey to ensure that the keys are + * returned in the same order as they were requested in. Non-existing keys + * get a default value of NULL.
+ * @link https://php.net/manual/en/memcached.constants.php + */ + const GET_PRESERVE_ORDER = 1; + + /** + * A flag for Memcached::get(), Memcached::getMulti() and + * Memcached::getMultiByKey() to ensure that the CAS token values are returned as well. + * @link https://php.net/manual/en/memcached.constants.php + */ + const GET_EXTENDED = 2; + + const GET_ERROR_RETURN_VALUE = false; + + /** + * (PECL memcached >= 0.1.0)+ * The key of the item to retrieve. + *
+ * @param callable $cache_cb [optional]+ * Read-through caching callback or NULL. + *
+ * @param int $flags [optional]+ * The flags for the get operation. + *
+ * @return mixed the value stored in the cache or FALSE otherwise. + * The Memcached::getResultCode will return + * Memcached::RES_NOTFOUND if the key does not exist. + */ + public function get ($key, callable $cache_cb = null, $flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key of the item to fetch. + *
+ * @param callable $cache_cb [optional]+ * Read-through caching callback or NULL + *
+ * @param int $flags [optional]+ * The flags for the get operation. + *
+ * @return mixed the value stored in the cache or FALSE otherwise. + * The Memcached::getResultCode will return + * Memcached::RES_NOTFOUND if the key does not exist. + */ + public function getByKey ($server_key, $key, callable $cache_cb = null, $flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * Array of keys to retrieve. + *
+ * @param int $flags [optional]+ * The flags for the get operation. + *
+ * @return mixed the array of found items or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function getMulti (array $keys, $flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param array $keys+ * Array of keys to retrieve. + *
+ * @param int $flags [optional]+ * The flags for the get operation. + *
+ * @return array|false the array of found items or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function getMultiByKey ($server_key, array $keys, $flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * Array of keys to request. + *
+ * @param bool $with_cas [optional]+ * Whether to request CAS token values also. + *
+ * @param callable $value_cb [optional]+ * The result callback or NULL. + *
+ * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function getDelayed (array $keys, $with_cas = null, callable $value_cb = null) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param array $keys+ * Array of keys to request. + *
+ * @param bool $with_cas [optional]+ * Whether to request CAS token values also. + *
+ * @param callable $value_cb [optional]+ * The result callback or NULL. + *
+ * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function getDelayedByKey ($server_key, array $keys, $with_cas = null, callable $value_cb = null) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key under which to store the value. + *
+ * @param mixed $value+ * The value to store. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function set ($key, $value, $expiration = 0, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key under which to store the value. + *
+ * @param mixed $value+ * The value to store. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function setByKey ($server_key, $key, $value, $expiration = 0, $udf_flags = 0) {} + + /** + * (PECL memcached >= 2.0.0)+ * The key under which to store the value. + *
+ * @param int $expiration+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function touch ($key, $expiration = 0) {} + + /** + * (PECL memcached >= 2.0.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key under which to store the value. + *
+ * @param int $expiration+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function touchByKey ($server_key, $key, $expiration) {} + + /** + * (PECL memcached >= 0.1.0)+ * An array of key/value pairs to store on the server. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function setMulti (array $items, $expiration = 0, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param array $items+ * An array of key/value pairs to store on the server. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function setMultiByKey ($server_key, array $items, $expiration = 0, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * Unique value associated with the existing item. Generated by memcache. + *
+ * @param string $key+ * The key under which to store the value. + *
+ * @param mixed $value+ * The value to store. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_DATA_EXISTS if the item you are trying + * to store has been modified since you last fetched it. + */ + public function cas ($cas_token, $key, $value, $expiration = 0, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * Unique value associated with the existing item. Generated by memcache. + *
+ * @param string $server_key+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key under which to store the value. + *
+ * @param mixed $value+ * The value to store. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_DATA_EXISTS if the item you are trying + * to store has been modified since you last fetched it. + */ + public function casByKey ($cas_token, $server_key, $key, $value, $expiration = 0, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key under which to store the value. + *
+ * @param mixed $value+ * The value to store. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTSTORED if the key already exists. + */ + public function add ($key, $value, $expiration = 0, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key under which to store the value. + *
+ * @param mixed $value+ * The value to store. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTSTORED if the key already exists. + */ + public function addByKey ($server_key, $key, $value, $expiration = 0, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key under which to store the value. + *
+ * @param string $value+ * The string to append. + *
+ * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTSTORED if the key does not exist. + */ + public function append ($key, $value) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key under which to store the value. + *
+ * @param string $value+ * The string to append. + *
+ * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTSTORED if the key does not exist. + */ + public function appendByKey ($server_key, $key, $value) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key of the item to prepend the data to. + *
+ * @param string $value+ * The string to prepend. + *
+ * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTSTORED if the key does not exist. + */ + public function prepend ($key, $value) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key of the item to prepend the data to. + *
+ * @param string $value+ * The string to prepend. + *
+ * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTSTORED if the key does not exist. + */ + public function prependByKey ($server_key, $key, $value) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key under which to store the value. + *
+ * @param mixed $value+ * The value to store. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTSTORED if the key does not exist. + */ + public function replace ($key, $value, $expiration = null, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key under which to store the value. + *
+ * @param mixed $value+ * The value to store. + *
+ * @param int $expiration [optional]+ * The expiration time, defaults to 0. See Expiration Times for more info. + *
+ * @param int $udf_flags [optional] + * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTSTORED if the key does not exist. + */ + public function replaceByKey ($server_key, $key, $value, $expiration = null, $udf_flags = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key to be deleted. + *
+ * @param int $time [optional]+ * The amount of time the server will wait to delete the item. + *
+ * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTFOUND if the key does not exist. + */ + public function delete ($key, $time = 0) {} + + /** + * (PECL memcached >= 2.0.0)+ * The keys to be deleted. + *
+ * @param int $time [optional]+ * The amount of time the server will wait to delete the items. + *
+ * @return array Returns array indexed by keys and where values are indicating whether operation succeeded or not. + * The Memcached::getResultCode will return + * Memcached::RES_NOTFOUND if the key does not exist. + */ + public function deleteMulti (array $keys, $time = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key to be deleted. + *
+ * @param int $time [optional]+ * The amount of time the server will wait to delete the item. + *
+ * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTFOUND if the key does not exist. + */ + public function deleteByKey ($server_key, $key, $time = 0) {} + + /** + * (PECL memcached >= 2.0.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param array $keys+ * The keys to be deleted. + *
+ * @param int $time [optional]+ * The amount of time the server will wait to delete the items. + *
+ * @return bool TRUE on success or FALSE on failure. + * The Memcached::getResultCode will return + * Memcached::RES_NOTFOUND if the key does not exist. + */ + public function deleteMultiByKey ($server_key, array $keys, $time = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key of the item to increment. + *
+ * @param int $offset [optional]+ * The amount by which to increment the item's value. + *
+ * @param int $initial_value [optional]+ * The value to set the item to if it doesn't currently exist. + *
+ * @param int $expiry [optional]+ * The expiry time to set on the item. + *
+ * @return int|false new item's value on success or FALSE on failure. + */ + public function increment ($key, $offset = 1, $initial_value = 0, $expiry = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The key of the item to decrement. + *
+ * @param int $offset [optional]+ * The amount by which to decrement the item's value. + *
+ * @param int $initial_value [optional]+ * The value to set the item to if it doesn't currently exist. + *
+ * @param int $expiry [optional]+ * The expiry time to set on the item. + *
+ * @return int|false item's new value on success or FALSE on failure. + */ + public function decrement ($key, $offset = 1, $initial_value = 0, $expiry = 0) {} + + /** + * (PECL memcached >= 2.0.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key of the item to increment. + *
+ * @param int $offset [optional]+ * The amount by which to increment the item's value. + *
+ * @param int $initial_value [optional]+ * The value to set the item to if it doesn't currently exist. + *
+ * @param int $expiry [optional]+ * The expiry time to set on the item. + *
+ * @return int|false new item's value on success or FALSE on failure. + */ + public function incrementByKey ($server_key, $key, $offset = 1, $initial_value = 0, $expiry = 0) {} + + /** + * (PECL memcached >= 2.0.0)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @param string $key+ * The key of the item to decrement. + *
+ * @param int $offset [optional]+ * The amount by which to decrement the item's value. + *
+ * @param int $initial_value [optional]+ * The value to set the item to if it doesn't currently exist. + *
+ * @param int $expiry [optional]+ * The expiry time to set on the item. + *
+ * @return int|false item's new value on success or FALSE on failure. + */ + public function decrementByKey ($server_key, $key, $offset = 1, $initial_value = 0, $expiry = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * The hostname of the memcache server. If the hostname is invalid, data-related + * operations will set + * Memcached::RES_HOST_LOOKUP_FAILURE result code. + *
+ * @param int $port+ * The port on which memcache is running. Usually, this is + * 11211. + *
+ * @param int $weight [optional]+ * The weight of the server relative to the total weight of all the + * servers in the pool. This controls the probability of the server being + * selected for operations. This is used only with consistent distribution + * option and usually corresponds to the amount of memory available to + * memcache on that server. + *
+ * @return bool TRUE on success or FALSE on failure. + */ + public function addServer ($host, $port, $weight = 0) {} + + /** + * (PECL memcached >= 0.1.1)+ * The key identifying the server to store the value on or retrieve it from. Instead of hashing on the actual key for the item, we hash on the server key when deciding which memcached server to talk to. This allows related items to be grouped together on a single server for efficiency with multi operations. + *
+ * @return array an array containing three keys of host, + * port, and weight on success or FALSE + * on failure. + * Use Memcached::getResultCode if necessary. + */ + public function getServerByKey ($server_key) {} + + /** + * (PECL memcached >= 2.0.0)items, slabs, sizes ...
+ * @return array Array of server statistics, one entry per server. + */ + public function getStats ($type = null) {} + + /** + * (PECL memcached >= 0.1.5)+ * Numer of seconds to wait before invalidating the items. + *
+ * @return bool TRUE on success or FALSE on failure. + * Use Memcached::getResultCode if necessary. + */ + public function flush ($delay = 0) {} + + /** + * (PECL memcached >= 0.1.0)+ * One of the Memcached::OPT_* constants. + *
+ * @return mixed the value of the requested option, or FALSE on + * error. + */ + public function getOption ($option) {} + + /** + * (PECL memcached >= 0.1.0)+ * An associative array of options where the key is the option to set and + * the value is the new value for the option. + *
+ * @return bool TRUE on success or FALSE on failure. + */ + public function setOptions (array $options) {} + + /** + * (PECL memcached >= 2.0.0)+ * The username to use for authentication. + *
+ * @param string $password+ * The password to use for authentication. + *
+ * @return bool TRUE on success or FALSE on failure. + */ + public function setSaslAuthData (string $username , string $password) {} + + /** + * (PECL memcached >= 2.0.0)
+ * $redis->connect('127.0.0.1', 6379);
+ * $redis->connect('127.0.0.1'); // port 6379 by default
+ * $redis->connect('127.0.0.1', 6379, 2.5); // 2.5 sec timeout.
+ * $redis->connect('/tmp/redis.sock'); // unix domain socket.
+ *
+ */
+ public function connect(
+ $host,
+ $port = 6379,
+ $timeout = 0.0,
+ $reserved = null,
+ $retryInterval = 0,
+ $readTimeout = 0.0
+ ) {
+ }
+
+ /**
+ * Connects to a Redis instance.
+ *
+ * @param string $host can be a host, or the path to a unix domain socket
+ * @param int $port optional
+ * @param float $timeout value in seconds (optional, default is 0.0 meaning unlimited)
+ * @param null $reserved should be null if $retry_interval is specified
+ * @param int $retryInterval retry interval in milliseconds.
+ * @param float $readTimeout value in seconds (optional, default is 0 meaning unlimited)
+ *
+ * @return bool TRUE on success, FALSE on error
+ *
+ * @see connect()
+ * @deprecated use Redis::connect()
+ */
+ public function open(
+ $host,
+ $port = 6379,
+ $timeout = 0.0,
+ $reserved = null,
+ $retryInterval = 0,
+ $readTimeout = 0.0
+ ) {
+ }
+
+ /**
+ * A method to determine if a phpredis object thinks it's connected to a server
+ *
+ * @return bool Returns TRUE if phpredis thinks it's connected and FALSE if not
+ */
+ public function isConnected()
+ {
+ }
+
+ /**
+ * Retrieve our host or unix socket that we're connected to
+ *
+ * @return string|bool The host or unix socket we're connected to or FALSE if we're not connected
+ */
+ public function getHost()
+ {
+ }
+
+ /**
+ * Get the port we're connected to
+ *
+ * @return int|bool Returns the port we're connected to or FALSE if we're not connected
+ */
+ public function getPort()
+ {
+ }
+
+ /**
+ * Get the database number phpredis is pointed to
+ *
+ * @return int|bool Returns the database number (int) phpredis thinks it's pointing to
+ * or FALSE if we're not connected
+ */
+ public function getDbNum()
+ {
+ }
+
+ /**
+ * Get the (write) timeout in use for phpredis
+ *
+ * @return float|bool The timeout (DOUBLE) specified in our connect call or FALSE if we're not connected
+ */
+ public function getTimeout()
+ {
+ }
+
+ /**
+ * Get the read timeout specified to phpredis or FALSE if we're not connected
+ *
+ * @return float|bool Returns the read timeout (which can be set using setOption and Redis::OPT_READ_TIMEOUT)
+ * or FALSE if we're not connected
+ */
+ public function getReadTimeout()
+ {
+ }
+
+ /**
+ * Gets the persistent ID that phpredis is using
+ *
+ * @return string|null|bool Returns the persistent id phpredis is using
+ * (which will only be set if connected with pconnect),
+ * NULL if we're not using a persistent ID,
+ * and FALSE if we're not connected
+ */
+ public function getPersistentID()
+ {
+ }
+
+ /**
+ * Get the password used to authenticate the phpredis connection
+ *
+ * @return string|null|bool Returns the password used to authenticate a phpredis session or NULL if none was used,
+ * and FALSE if we're not connected
+ */
+ public function getAuth()
+ {
+ }
+
+ /**
+ * Connects to a Redis instance or reuse a connection already established with pconnect/popen.
+ *
+ * The connection will not be closed on close or end of request until the php process ends.
+ * So be patient on to many open FD's (specially on redis server side) when using persistent connections on
+ * many servers connecting to one redis server.
+ *
+ * Also more than one persistent connection can be made identified by either host + port + timeout
+ * or host + persistentId or unix socket + timeout.
+ *
+ * This feature is not available in threaded versions. pconnect and popen then working like their non persistent
+ * equivalents.
+ *
+ * @param string $host can be a host, or the path to a unix domain socket
+ * @param int $port optional
+ * @param float $timeout value in seconds (optional, default is 0 meaning unlimited)
+ * @param string $persistentId identity for the requested persistent connection
+ * @param int $retryInterval retry interval in milliseconds.
+ * @param float $readTimeout value in seconds (optional, default is 0 meaning unlimited)
+ *
+ * @return bool TRUE on success, FALSE on ertcnror.
+ *
+ * @example
+ *
+ * $redis->pconnect('127.0.0.1', 6379);
+ *
+ * // port 6379 by default - same connection like before
+ * $redis->pconnect('127.0.0.1');
+ *
+ * // 2.5 sec timeout and would be another connection than the two before.
+ * $redis->pconnect('127.0.0.1', 6379, 2.5);
+ *
+ * // x is sent as persistent_id and would be another connection than the three before.
+ * $redis->pconnect('127.0.0.1', 6379, 2.5, 'x');
+ *
+ * // unix domain socket - would be another connection than the four before.
+ * $redis->pconnect('/tmp/redis.sock');
+ *
+ */
+ public function pconnect(
+ $host,
+ $port = 6379,
+ $timeout = 0.0,
+ $persistentId = null,
+ $retryInterval = 0,
+ $readTimeout = 0.0
+ ) {
+ }
+
+ /**
+ * @param string $host
+ * @param int $port
+ * @param float $timeout
+ * @param string $persistentId
+ * @param int $retryInterval
+ * @param float $readTimeout
+ *
+ * @return bool
+ *
+ * @deprecated use Redis::pconnect()
+ * @see pconnect()
+ */
+ public function popen(
+ $host,
+ $port = 6379,
+ $timeout = 0.0,
+ $persistentId = '',
+ $retryInterval = 0,
+ $readTimeout = 0.0
+ ) {
+ }
+
+ /**
+ * Disconnects from the Redis instance.
+ *
+ * Note: Closing a persistent connection requires PhpRedis >= 4.2.0
+ *
+ * @since >= 4.2 Closing a persistent connection requires PhpRedis
+ *
+ * @return bool TRUE on success, FALSE on error
+ */
+ public function close()
+ {
+ }
+
+ /**
+ * Swap one Redis database with another atomically
+ *
+ * Note: Requires Redis >= 4.0.0
+ *
+ * @param int $db1
+ * @param int $db2
+ *
+ * @return bool TRUE on success and FALSE on failure
+ *
+ * @link https://redis.io/commands/swapdb
+ * @since >= 4.0
+ * @example
+ * + * // Swaps DB 0 with DB 1 atomically + * $redis->swapdb(0, 1); + *+ */ + public function swapdb(int $db1, int $db2) + { + } + + /** + * Set client option + * + * @param int $option option name + * @param mixed $value option value + * + * @return bool TRUE on success, FALSE on error + * + * @example + *
+ * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_NONE); // don't serialize data + * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_PHP); // use built-in serialize/unserialize + * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_IGBINARY); // use igBinary serialize/unserialize + * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_MSGPACK); // Use msgpack serialize/unserialize + * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_JSON); // Use json serialize/unserialize + * + * $redis->setOption(Redis::OPT_PREFIX, 'myAppName:'); // use custom prefix on all keys + * + * // Options for the SCAN family of commands, indicating whether to abstract + * // empty results from the user. If set to SCAN_NORETRY (the default), phpredis + * // will just issue one SCAN command at a time, sometimes returning an empty + * // array of results. If set to SCAN_RETRY, phpredis will retry the scan command + * // until keys come back OR Redis returns an iterator of zero + * $redis->setOption(Redis::OPT_SCAN, Redis::SCAN_NORETRY); + * $redis->setOption(Redis::OPT_SCAN, Redis::SCAN_RETRY); + *+ */ + public function setOption($option, $value) + { + } + + /** + * Get client option + * + * @param int $option parameter name + * + * @return mixed|null Parameter value + * + * @see setOption() + * @example + * // return option value + * $redis->getOption(Redis::OPT_SERIALIZER); + */ + public function getOption($option) + { + } + + /** + * Check the current connection status + * + * @param string $message + * + * @return bool|string TRUE if the command is successful or returns message + * Throws a RedisException object on connectivity error, as described above. + * @throws RedisException + * @link https://redis.io/commands/ping + */ + public function ping($message) + { + } + + /** + * Echo the given string + * + * @param string $message + * + * @return string Returns message + * + * @link https://redis.io/commands/echo + */ + public function echo($message) + { + } + + /** + * Get the value related to the specified key + * + * @param string $key + * + * @return string|mixed|bool If key didn't exist, FALSE is returned. + * Otherwise, the value related to this key is returned + * + * @link https://redis.io/commands/get + * @example + *
+ * $redis->set('key', 'hello');
+ * $redis->get('key');
+ *
+ * // set and get with serializer
+ * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_JSON);
+ *
+ * $redis->set('key', ['asd' => 'as', 'dd' => 123, 'b' => true]);
+ * var_dump($redis->get('key'));
+ * // Output:
+ * array(3) {
+ * 'asd' => string(2) "as"
+ * 'dd' => int(123)
+ * 'b' => bool(true)
+ * }
+ *
+ */
+ public function get($key)
+ {
+ }
+
+ /**
+ * Set the string value in argument as value of the key.
+ *
+ * @since If you're using Redis >= 2.6.12, you can pass extended options as explained in example
+ *
+ * @param string $key
+ * @param string|mixed $value string if not used serializer
+ * @param int|array $timeout [optional] Calling setex() is preferred if you want a timeout.
+ * // Simple key -> value set
+ * $redis->set('key', 'value');
+ *
+ * // Will redirect, and actually make an SETEX call
+ * $redis->set('key','value', 10);
+ *
+ * // Will set the key, if it doesn't exist, with a ttl of 10 seconds
+ * $redis->set('key', 'value', ['nx', 'ex' => 10]);
+ *
+ * // Will set a key, if it does exist, with a ttl of 1000 milliseconds
+ * $redis->set('key', 'value', ['xx', 'px' => 1000]);
+ *
+ *
+ * @return bool TRUE if the command is successful
+ *
+ * @link https://redis.io/commands/set
+ */
+ public function set($key, $value, $timeout = null)
+ {
+ }
+
+ /**
+ * Set the string value in argument as value of the key, with a time to live.
+ *
+ * @param string $key
+ * @param int $ttl
+ * @param string|mixed $value
+ *
+ * @return bool TRUE if the command is successful
+ *
+ * @link https://redis.io/commands/setex
+ * @example $redis->setex('key', 3600, 'value'); // sets key → value, with 1h TTL.
+ */
+ public function setex($key, $ttl, $value)
+ {
+ }
+
+ /**
+ * Set the value and expiration in milliseconds of a key.
+ *
+ * @see setex()
+ * @param string $key
+ * @param int $ttl, in milliseconds.
+ * @param string|mixed $value
+ *
+ * @return bool TRUE if the command is successful
+ *
+ * @link https://redis.io/commands/psetex
+ * @example $redis->psetex('key', 1000, 'value'); // sets key → value, with 1sec TTL.
+ */
+ public function psetex($key, $ttl, $value)
+ {
+ }
+
+ /**
+ * Set the string value in argument as value of the key if the key doesn't already exist in the database.
+ *
+ * @param string $key
+ * @param string|mixed $value
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/setnx
+ * @example
+ *
+ * $redis->setnx('key', 'value'); // return TRUE
+ * $redis->setnx('key', 'value'); // return FALSE
+ *
+ */
+ public function setnx($key, $value)
+ {
+ }
+
+ /**
+ * Remove specified keys.
+ *
+ * @param int|string|array $key1 An array of keys, or an undefined number of parameters, each a key: key1 key2 key3 ... keyN
+ * @param int|string ...$otherKeys
+ *
+ * @return int Number of keys deleted
+ *
+ * @link https://redis.io/commands/del
+ * @example
+ *
+ * $redis->set('key1', 'val1');
+ * $redis->set('key2', 'val2');
+ * $redis->set('key3', 'val3');
+ * $redis->set('key4', 'val4');
+ *
+ * $redis->del('key1', 'key2'); // return 2
+ * $redis->del(['key3', 'key4']); // return 2
+ *
+ */
+ public function del($key1, ...$otherKeys)
+ {
+ }
+
+ /**
+ * @see del()
+ * @deprecated use Redis::del()
+ *
+ * @param string|string[] $key1
+ * @param string $key2
+ * @param string $key3
+ *
+ * @return int Number of keys deleted
+ */
+ public function delete($key1, $key2 = null, $key3 = null)
+ {
+ }
+
+ /**
+ * Delete a key asynchronously in another thread. Otherwise it is just as DEL, but non blocking.
+ *
+ * @see del()
+ * @param string|string[] $key1
+ * @param string $key2
+ * @param string $key3
+ *
+ * @return int Number of keys unlinked.
+ *
+ * @link https://redis.io/commands/unlink
+ * @example
+ *
+ * $redis->set('key1', 'val1');
+ * $redis->set('key2', 'val2');
+ * $redis->set('key3', 'val3');
+ * $redis->set('key4', 'val4');
+ * $redis->unlink('key1', 'key2'); // return 2
+ * $redis->unlink(array('key3', 'key4')); // return 2
+ *
+ */
+ public function unlink($key1, $key2 = null, $key3 = null)
+ {
+ }
+
+ /**
+ * Enter and exit transactional mode.
+ *
+ * @param int $mode Redis::MULTI|Redis::PIPELINE
+ * Defaults to Redis::MULTI.
+ * A Redis::MULTI block of commands runs as a single transaction;
+ * a Redis::PIPELINE block is simply transmitted faster to the server, but without any guarantee of atomicity.
+ * discard cancels a transaction.
+ *
+ * @return Redis returns the Redis instance and enters multi-mode.
+ * Once in multi-mode, all subsequent method calls return the same object until exec() is called.
+ *
+ * @link https://redis.io/commands/multi
+ * @example
+ *
+ * $ret = $redis->multi()
+ * ->set('key1', 'val1')
+ * ->get('key1')
+ * ->set('key2', 'val2')
+ * ->get('key2')
+ * ->exec();
+ *
+ * //$ret == array (
+ * // 0 => TRUE,
+ * // 1 => 'val1',
+ * // 2 => TRUE,
+ * // 3 => 'val2');
+ *
+ */
+ public function multi($mode = Redis::MULTI)
+ {
+ }
+
+ /**
+ * Returns a Redis instance which can simply transmitted faster to the server.
+ *
+ * @return Redis returns the Redis instance.
+ * Once in pipeline-mode, all subsequent method calls return the same object until exec() is called.
+ * Pay attention, that Pipeline is not a transaction, so you can get unexpected
+ * results in case of big pipelines and small read/write timeouts.
+ *
+ * @link https://redis.io/topics/pipelining
+ * @example
+ *
+ * $ret = $this->redis->pipeline()
+ * ->ping()
+ * ->multi()->set('x', 42)->incr('x')->exec()
+ * ->ping()
+ * ->multi()->get('x')->del('x')->exec()
+ * ->ping()
+ * ->exec();
+ *
+ * //$ret == array (
+ * // 0 => '+PONG',
+ * // 1 => [TRUE, 43],
+ * // 2 => '+PONG',
+ * // 3 => [43, 1],
+ * // 4 => '+PONG');
+ *
+ */
+ public function pipeline()
+ {
+ }
+
+
+ /**
+ * @return void|array
+ *
+ * @see multi()
+ * @link https://redis.io/commands/exec
+ */
+ public function exec()
+ {
+ }
+
+ /**
+ * @see multi()
+ * @link https://redis.io/commands/discard
+ */
+ public function discard()
+ {
+ }
+
+ /**
+ * Watches a key for modifications by another client. If the key is modified between WATCH and EXEC,
+ * the MULTI/EXEC transaction will fail (return FALSE). unwatch cancels all the watching of all keys by this client.
+ * @param string|string[] $key a list of keys
+ *
+ * @return void
+ *
+ * @link https://redis.io/commands/watch
+ * @example
+ *
+ * $redis->watch('x');
+ * // long code here during the execution of which other clients could well modify `x`
+ * $ret = $redis->multi()
+ * ->incr('x')
+ * ->exec();
+ * // $ret = FALSE if x has been modified between the call to WATCH and the call to EXEC.
+ *
+ */
+ public function watch($key)
+ {
+ }
+
+ /**
+ * @see watch()
+ * @link https://redis.io/commands/unwatch
+ */
+ public function unwatch()
+ {
+ }
+
+ /**
+ * Subscribe to channels.
+ *
+ * Warning: this function will probably change in the future.
+ *
+ * @param string[] $channels an array of channels to subscribe
+ * @param string|array $callback either a string or an array($instance, 'method_name').
+ * The callback function receives 3 parameters: the redis instance, the channel name, and the message.
+ *
+ * @return mixed|null Any non-null return value in the callback will be returned to the caller.
+ *
+ * @link https://redis.io/commands/subscribe
+ * @example
+ *
+ * function f($redis, $chan, $msg) {
+ * switch($chan) {
+ * case 'chan-1':
+ * ...
+ * break;
+ *
+ * case 'chan-2':
+ * ...
+ * break;
+ *
+ * case 'chan-2':
+ * ...
+ * break;
+ * }
+ * }
+ *
+ * $redis->subscribe(array('chan-1', 'chan-2', 'chan-3'), 'f'); // subscribe to 3 chans
+ *
+ */
+ public function subscribe($channels, $callback)
+ {
+ }
+
+ /**
+ * Subscribe to channels by pattern
+ *
+ * @param array $patterns an array of glob-style patterns to subscribe
+ * @param string|array $callback Either a string or an array with an object and method.
+ * The callback will get four arguments ($redis, $pattern, $channel, $message)
+ * @param mixed Any non-null return value in the callback will be returned to the caller
+ *
+ * @link https://redis.io/commands/psubscribe
+ * @example
+ *
+ * function psubscribe($redis, $pattern, $chan, $msg) {
+ * echo "Pattern: $pattern\n";
+ * echo "Channel: $chan\n";
+ * echo "Payload: $msg\n";
+ * }
+ *
+ */
+ public function psubscribe($patterns, $callback)
+ {
+ }
+
+ /**
+ * Publish messages to channels.
+ *
+ * Warning: this function will probably change in the future.
+ *
+ * @param string $channel a channel to publish to
+ * @param string $message string
+ *
+ * @return int Number of clients that received the message
+ *
+ * @link https://redis.io/commands/publish
+ * @example $redis->publish('chan-1', 'hello, world!'); // send message.
+ */
+ public function publish($channel, $message)
+ {
+ }
+
+ /**
+ * A command allowing you to get information on the Redis pub/sub system
+ *
+ * @param string $keyword String, which can be: "channels", "numsub", or "numpat"
+ * @param string|array $argument Optional, variant.
+ * For the "channels" subcommand, you can pass a string pattern.
+ * For "numsub" an array of channel names
+ *
+ * @return array|int Either an integer or an array.
+ * - channels Returns an array where the members are the matching channels.
+ * - numsub Returns a key/value array where the keys are channel names and
+ * values are their counts.
+ * - numpat Integer return containing the number active pattern subscriptions
+ *
+ * @link https://redis.io/commands/pubsub
+ * @example
+ *
+ * $redis->pubsub('channels'); // All channels
+ * $redis->pubsub('channels', '*pattern*'); // Just channels matching your pattern
+ * $redis->pubsub('numsub', array('chan1', 'chan2')); // Get subscriber counts for 'chan1' and 'chan2'
+ * $redis->pubsub('numpat'); // Get the number of pattern subscribers
+ *
+ */
+ public function pubsub($keyword, $argument)
+ {
+ }
+
+ /**
+ * Stop listening for messages posted to the given channels.
+ *
+ * @param array $channels an array of channels to usubscribe
+ *
+ * @link https://redis.io/commands/unsubscribe
+ */
+ public function unsubscribe($channels = null)
+ {
+ }
+
+ /**
+ * Stop listening for messages posted to the given channels.
+ *
+ * @param array $patterns an array of glob-style patterns to unsubscribe
+ *
+ * @link https://redis.io/commands/punsubscribe
+ */
+ public function punsubscribe($patterns = null)
+ {
+ }
+
+ /**
+ * Verify if the specified key/keys exists
+ *
+ * This function took a single argument and returned TRUE or FALSE in phpredis versions < 4.0.0.
+ *
+ * @since >= 4.0 Returned int, if < 4.0 returned bool
+ *
+ * @param string|string[] $key
+ *
+ * @return int|bool The number of keys tested that do exist
+ *
+ * @link https://redis.io/commands/exists
+ * @link https://github.com/phpredis/phpredis#exists
+ * @example
+ *
+ * $redis->exists('key'); // 1
+ * $redis->exists('NonExistingKey'); // 0
+ *
+ * $redis->mset(['foo' => 'foo', 'bar' => 'bar', 'baz' => 'baz']);
+ * $redis->exists(['foo', 'bar', 'baz]); // 3
+ * $redis->exists('foo', 'bar', 'baz'); // 3
+ *
+ */
+ public function exists($key)
+ {
+ }
+
+ /**
+ * Increment the number stored at key by one.
+ *
+ * @param string $key
+ *
+ * @return int the new value
+ *
+ * @link https://redis.io/commands/incr
+ * @example
+ *
+ * $redis->incr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value 1
+ * $redis->incr('key1'); // 2
+ * $redis->incr('key1'); // 3
+ * $redis->incr('key1'); // 4
+ *
+ */
+ public function incr($key)
+ {
+ }
+
+ /**
+ * Increment the float value of a key by the given amount
+ *
+ * @param string $key
+ * @param float $increment
+ *
+ * @return float
+ *
+ * @link https://redis.io/commands/incrbyfloat
+ * @example
+ *
+ * $redis->set('x', 3);
+ * $redis->incrByFloat('x', 1.5); // float(4.5)
+ * $redis->get('x'); // float(4.5)
+ *
+ */
+ public function incrByFloat($key, $increment)
+ {
+ }
+
+ /**
+ * Increment the number stored at key by one.
+ * If the second argument is filled, it will be used as the integer value of the increment.
+ *
+ * @param string $key key
+ * @param int $value value that will be added to key (only for incrBy)
+ *
+ * @return int the new value
+ *
+ * @link https://redis.io/commands/incrby
+ * @example
+ *
+ * $redis->incr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value 1
+ * $redis->incr('key1'); // 2
+ * $redis->incr('key1'); // 3
+ * $redis->incr('key1'); // 4
+ * $redis->incrBy('key1', 10); // 14
+ *
+ */
+ public function incrBy($key, $value)
+ {
+ }
+
+ /**
+ * Decrement the number stored at key by one.
+ *
+ * @param string $key
+ *
+ * @return int the new value
+ *
+ * @link https://redis.io/commands/decr
+ * @example
+ *
+ * $redis->decr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value -1
+ * $redis->decr('key1'); // -2
+ * $redis->decr('key1'); // -3
+ *
+ */
+ public function decr($key)
+ {
+ }
+
+ /**
+ * Decrement the number stored at key by one.
+ * If the second argument is filled, it will be used as the integer value of the decrement.
+ *
+ * @param string $key
+ * @param int $value that will be subtracted to key (only for decrBy)
+ *
+ * @return int the new value
+ *
+ * @link https://redis.io/commands/decrby
+ * @example
+ *
+ * $redis->decr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value -1
+ * $redis->decr('key1'); // -2
+ * $redis->decr('key1'); // -3
+ * $redis->decrBy('key1', 10); // -13
+ *
+ */
+ public function decrBy($key, $value)
+ {
+ }
+
+ /**
+ * Adds the string values to the head (left) of the list.
+ * Creates the list if the key didn't exist.
+ * If the key exists and is not a list, FALSE is returned.
+ *
+ * @param string $key
+ * @param string|mixed $value1... Variadic list of values to push in key, if dont used serialized, used string
+ *
+ * @return int|bool The new length of the list in case of success, FALSE in case of Failure
+ *
+ * @link https://redis.io/commands/lpush
+ * @example
+ *
+ * $redis->lPush('l', 'v1', 'v2', 'v3', 'v4') // int(4)
+ * var_dump( $redis->lRange('l', 0, -1) );
+ * // Output:
+ * // array(4) {
+ * // [0]=> string(2) "v4"
+ * // [1]=> string(2) "v3"
+ * // [2]=> string(2) "v2"
+ * // [3]=> string(2) "v1"
+ * // }
+ *
+ */
+ public function lPush($key, ...$value1)
+ {
+ }
+
+ /**
+ * Adds the string values to the tail (right) of the list.
+ * Creates the list if the key didn't exist.
+ * If the key exists and is not a list, FALSE is returned.
+ *
+ * @param string $key
+ * @param string|mixed $value1... Variadic list of values to push in key, if dont used serialized, used string
+ *
+ * @return int|bool The new length of the list in case of success, FALSE in case of Failure
+ *
+ * @link https://redis.io/commands/rpush
+ * @example
+ *
+ * $redis->rPush('l', 'v1', 'v2', 'v3', 'v4'); // int(4)
+ * var_dump( $redis->lRange('l', 0, -1) );
+ * // Output:
+ * // array(4) {
+ * // [0]=> string(2) "v1"
+ * // [1]=> string(2) "v2"
+ * // [2]=> string(2) "v3"
+ * // [3]=> string(2) "v4"
+ * // }
+ *
+ */
+ public function rPush($key, ...$value1)
+ {
+ }
+
+ /**
+ * Adds the string value to the head (left) of the list if the list exists.
+ *
+ * @param string $key
+ * @param string|mixed $value String, value to push in key
+ *
+ * @return int|bool The new length of the list in case of success, FALSE in case of Failure.
+ *
+ * @link https://redis.io/commands/lpushx
+ * @example
+ *
+ * $redis->del('key1');
+ * $redis->lPushx('key1', 'A'); // returns 0
+ * $redis->lPush('key1', 'A'); // returns 1
+ * $redis->lPushx('key1', 'B'); // returns 2
+ * $redis->lPushx('key1', 'C'); // returns 3
+ * // key1 now points to the following list: [ 'A', 'B', 'C' ]
+ *
+ */
+ public function lPushx($key, $value)
+ {
+ }
+
+ /**
+ * Adds the string value to the tail (right) of the list if the ist exists. FALSE in case of Failure.
+ *
+ * @param string $key
+ * @param string|mixed $value String, value to push in key
+ *
+ * @return int|bool The new length of the list in case of success, FALSE in case of Failure.
+ *
+ * @link https://redis.io/commands/rpushx
+ * @example
+ *
+ * $redis->del('key1');
+ * $redis->rPushx('key1', 'A'); // returns 0
+ * $redis->rPush('key1', 'A'); // returns 1
+ * $redis->rPushx('key1', 'B'); // returns 2
+ * $redis->rPushx('key1', 'C'); // returns 3
+ * // key1 now points to the following list: [ 'A', 'B', 'C' ]
+ *
+ */
+ public function rPushx($key, $value)
+ {
+ }
+
+ /**
+ * Returns and removes the first element of the list.
+ *
+ * @param string $key
+ *
+ * @return mixed|bool if command executed successfully BOOL FALSE in case of failure (empty list)
+ *
+ * @link https://redis.io/commands/lpop
+ * @example
+ *
+ * $redis->rPush('key1', 'A');
+ * $redis->rPush('key1', 'B');
+ * $redis->rPush('key1', 'C'); // key1 => [ 'A', 'B', 'C' ]
+ * $redis->lPop('key1'); // key1 => [ 'B', 'C' ]
+ *
+ */
+ public function lPop($key)
+ {
+ }
+
+ /**
+ * Returns and removes the last element of the list.
+ *
+ * @param string $key
+ *
+ * @return mixed|bool if command executed successfully BOOL FALSE in case of failure (empty list)
+ *
+ * @link https://redis.io/commands/rpop
+ * @example
+ *
+ * $redis->rPush('key1', 'A');
+ * $redis->rPush('key1', 'B');
+ * $redis->rPush('key1', 'C'); // key1 => [ 'A', 'B', 'C' ]
+ * $redis->rPop('key1'); // key1 => [ 'A', 'B' ]
+ *
+ */
+ public function rPop($key)
+ {
+ }
+
+ /**
+ * Is a blocking lPop primitive. If at least one of the lists contains at least one element,
+ * the element will be popped from the head of the list and returned to the caller.
+ * Il all the list identified by the keys passed in arguments are empty, blPop will block
+ * during the specified timeout until an element is pushed to one of those lists. This element will be popped.
+ *
+ * @param string|string[] $keys String array containing the keys of the lists OR variadic list of strings
+ * @param int $timeout Timeout is always the required final parameter
+ *
+ * @return array ['listName', 'element']
+ *
+ * @link https://redis.io/commands/blpop
+ * @example
+ *
+ * // Non blocking feature
+ * $redis->lPush('key1', 'A');
+ * $redis->del('key2');
+ *
+ * $redis->blPop('key1', 'key2', 10); // array('key1', 'A')
+ * // OR
+ * $redis->blPop(['key1', 'key2'], 10); // array('key1', 'A')
+ *
+ * $redis->brPop('key1', 'key2', 10); // array('key1', 'A')
+ * // OR
+ * $redis->brPop(['key1', 'key2'], 10); // array('key1', 'A')
+ *
+ * // Blocking feature
+ *
+ * // process 1
+ * $redis->del('key1');
+ * $redis->blPop('key1', 10);
+ * // blocking for 10 seconds
+ *
+ * // process 2
+ * $redis->lPush('key1', 'A');
+ *
+ * // process 1
+ * // array('key1', 'A') is returned
+ *
+ */
+ public function blPop($keys, $timeout)
+ {
+ }
+
+ /**
+ * Is a blocking rPop primitive. If at least one of the lists contains at least one element,
+ * the element will be popped from the head of the list and returned to the caller.
+ * Il all the list identified by the keys passed in arguments are empty, brPop will
+ * block during the specified timeout until an element is pushed to one of those lists. T
+ * his element will be popped.
+ *
+ * @param string|string[] $keys String array containing the keys of the lists OR variadic list of strings
+ * @param int $timeout Timeout is always the required final parameter
+ *
+ * @return array ['listName', 'element']
+ *
+ * @link https://redis.io/commands/brpop
+ * @example
+ *
+ * // Non blocking feature
+ * $redis->lPush('key1', 'A');
+ * $redis->del('key2');
+ *
+ * $redis->blPop('key1', 'key2', 10); // array('key1', 'A')
+ * // OR
+ * $redis->blPop(array('key1', 'key2'), 10); // array('key1', 'A')
+ *
+ * $redis->brPop('key1', 'key2', 10); // array('key1', 'A')
+ * // OR
+ * $redis->brPop(array('key1', 'key2'), 10); // array('key1', 'A')
+ *
+ * // Blocking feature
+ *
+ * // process 1
+ * $redis->del('key1');
+ * $redis->blPop('key1', 10);
+ * // blocking for 10 seconds
+ *
+ * // process 2
+ * $redis->lPush('key1', 'A');
+ *
+ * // process 1
+ * // array('key1', 'A') is returned
+ *
+ */
+ public function brPop(array $keys, $timeout)
+ {
+ }
+
+ /**
+ * Returns the size of a list identified by Key. If the list didn't exist or is empty,
+ * the command returns 0. If the data type identified by Key is not a list, the command return FALSE.
+ *
+ * @param string $key
+ *
+ * @return int|bool The size of the list identified by Key exists.
+ * bool FALSE if the data type identified by Key is not list
+ *
+ * @link https://redis.io/commands/llen
+ * @example
+ *
+ * $redis->rPush('key1', 'A');
+ * $redis->rPush('key1', 'B');
+ * $redis->rPush('key1', 'C'); // key1 => [ 'A', 'B', 'C' ]
+ * $redis->lLen('key1'); // 3
+ * $redis->rPop('key1');
+ * $redis->lLen('key1'); // 2
+ *
+ */
+ public function lLen($key)
+ {
+ }
+
+ /**
+ * @see lLen()
+ * @link https://redis.io/commands/llen
+ * @deprecated use Redis::lLen()
+ *
+ * @param string $key
+ *
+ * @return int The size of the list identified by Key exists
+ */
+ public function lSize($key)
+ {
+ }
+
+ /**
+ * Return the specified element of the list stored at the specified key.
+ * 0 the first element, 1 the second ... -1 the last element, -2 the penultimate ...
+ * Return FALSE in case of a bad index or a key that doesn't point to a list.
+ *
+ * @param string $key
+ * @param int $index
+ *
+ * @return mixed|bool the element at this index
+ *
+ * Bool FALSE if the key identifies a non-string data type, or no value corresponds to this index in the list Key.
+ *
+ * @link https://redis.io/commands/lindex
+ * @example
+ *
+ * $redis->rPush('key1', 'A');
+ * $redis->rPush('key1', 'B');
+ * $redis->rPush('key1', 'C'); // key1 => [ 'A', 'B', 'C' ]
+ * $redis->lIndex('key1', 0); // 'A'
+ * $redis->lIndex('key1', -1); // 'C'
+ * $redis->lIndex('key1', 10); // `FALSE`
+ *
+ */
+ public function lIndex($key, $index)
+ {
+ }
+
+ /**
+ * @see lIndex()
+ * @link https://redis.io/commands/lindex
+ * @deprecated use Redis::lIndex()
+ *
+ * @param string $key
+ * @param int $index
+ * @return mixed|bool the element at this index
+ */
+ public function lGet($key, $index)
+ {
+ }
+
+ /**
+ * Set the list at index with the new value.
+ *
+ * @param string $key
+ * @param int $index
+ * @param string $value
+ *
+ * @return bool TRUE if the new value is setted.
+ * FALSE if the index is out of range, or data type identified by key is not a list.
+ *
+ * @link https://redis.io/commands/lset
+ * @example
+ *
+ * $redis->rPush('key1', 'A');
+ * $redis->rPush('key1', 'B');
+ * $redis->rPush('key1', 'C'); // key1 => [ 'A', 'B', 'C' ]
+ * $redis->lIndex('key1', 0); // 'A'
+ * $redis->lSet('key1', 0, 'X');
+ * $redis->lIndex('key1', 0); // 'X'
+ *
+ */
+ public function lSet($key, $index, $value)
+ {
+ }
+
+ /**
+ * Returns the specified elements of the list stored at the specified key in
+ * the range [start, end]. start and stop are interpretated as indices: 0 the first element,
+ * 1 the second ... -1 the last element, -2 the penultimate ...
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ *
+ * @return array containing the values in specified range.
+ *
+ * @link https://redis.io/commands/lrange
+ * @example
+ *
+ * $redis->rPush('key1', 'A');
+ * $redis->rPush('key1', 'B');
+ * $redis->rPush('key1', 'C');
+ * $redis->lRange('key1', 0, -1); // array('A', 'B', 'C')
+ *
+ */
+ public function lRange($key, $start, $end)
+ {
+ }
+
+ /**
+ * @see lRange()
+ * @link https://redis.io/commands/lrange
+ * @deprecated use Redis::lRange()
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @return array
+ */
+ public function lGetRange($key, $start, $end)
+ {
+ }
+
+ /**
+ * Trims an existing list so that it will contain only a specified range of elements.
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $stop
+ *
+ * @return array|bool Bool return FALSE if the key identify a non-list value
+ *
+ * @link https://redis.io/commands/ltrim
+ * @example
+ *
+ * $redis->rPush('key1', 'A');
+ * $redis->rPush('key1', 'B');
+ * $redis->rPush('key1', 'C');
+ * $redis->lRange('key1', 0, -1); // array('A', 'B', 'C')
+ * $redis->lTrim('key1', 0, 1);
+ * $redis->lRange('key1', 0, -1); // array('A', 'B')
+ *
+ */
+ public function lTrim($key, $start, $stop)
+ {
+ }
+
+ /**
+ * @see lTrim()
+ * @link https://redis.io/commands/ltrim
+ * @deprecated use Redis::lTrim()
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $stop
+ */
+ public function listTrim($key, $start, $stop)
+ {
+ }
+
+ /**
+ * Removes the first count occurrences of the value element from the list.
+ * If count is zero, all the matching elements are removed. If count is negative,
+ * elements are removed from tail to head.
+ *
+ * @param string $key
+ * @param string $value
+ * @param int $count
+ *
+ * @return int|bool the number of elements to remove
+ * bool FALSE if the value identified by key is not a list.
+ *
+ * @link https://redis.io/commands/lrem
+ * @example
+ *
+ * $redis->lPush('key1', 'A');
+ * $redis->lPush('key1', 'B');
+ * $redis->lPush('key1', 'C');
+ * $redis->lPush('key1', 'A');
+ * $redis->lPush('key1', 'A');
+ *
+ * $redis->lRange('key1', 0, -1); // array('A', 'A', 'C', 'B', 'A')
+ * $redis->lRem('key1', 'A', 2); // 2
+ * $redis->lRange('key1', 0, -1); // array('C', 'B', 'A')
+ *
+ */
+ public function lRem($key, $value, $count)
+ {
+ }
+
+ /**
+ * @see lRem
+ * @link https://redis.io/commands/lremove
+ * @deprecated use Redis::lRem()
+ *
+ * @param string $key
+ * @param string $value
+ * @param int $count
+ */
+ public function lRemove($key, $value, $count)
+ {
+ }
+
+ /**
+ * Insert value in the list before or after the pivot value. the parameter options
+ * specify the position of the insert (before or after). If the list didn't exists,
+ * or the pivot didn't exists, the value is not inserted.
+ *
+ * @param string $key
+ * @param int $position Redis::BEFORE | Redis::AFTER
+ * @param string $pivot
+ * @param string|mixed $value
+ *
+ * @return int The number of the elements in the list, -1 if the pivot didn't exists.
+ *
+ * @link https://redis.io/commands/linsert
+ * @example
+ *
+ * $redis->del('key1');
+ * $redis->lInsert('key1', Redis::AFTER, 'A', 'X'); // 0
+ *
+ * $redis->lPush('key1', 'A');
+ * $redis->lPush('key1', 'B');
+ * $redis->lPush('key1', 'C');
+ *
+ * $redis->lInsert('key1', Redis::BEFORE, 'C', 'X'); // 4
+ * $redis->lRange('key1', 0, -1); // array('A', 'B', 'X', 'C')
+ *
+ * $redis->lInsert('key1', Redis::AFTER, 'C', 'Y'); // 5
+ * $redis->lRange('key1', 0, -1); // array('A', 'B', 'X', 'C', 'Y')
+ *
+ * $redis->lInsert('key1', Redis::AFTER, 'W', 'value'); // -1
+ *
+ */
+ public function lInsert($key, $position, $pivot, $value)
+ {
+ }
+
+ /**
+ * Adds a values to the set value stored at key.
+ *
+ * @param string $key Required key
+ * @param string|mixed ...$value1 Variadic list of values
+ *
+ * @return int|bool The number of elements added to the set.
+ * If this value is already in the set, FALSE is returned
+ *
+ * @link https://redis.io/commands/sadd
+ * @example
+ *
+ * $redis->sAdd('k', 'v1'); // int(1)
+ * $redis->sAdd('k', 'v1', 'v2', 'v3'); // int(2)
+ *
+ */
+ public function sAdd($key, ...$value1)
+ {
+ }
+
+ /**
+ * Removes the specified members from the set value stored at key.
+ *
+ * @param string $key
+ * @param string|mixed ...$member1 Variadic list of members
+ *
+ * @return int The number of elements removed from the set
+ *
+ * @link https://redis.io/commands/srem
+ * @example
+ *
+ * var_dump( $redis->sAdd('k', 'v1', 'v2', 'v3') ); // int(3)
+ * var_dump( $redis->sRem('k', 'v2', 'v3') ); // int(2)
+ * var_dump( $redis->sMembers('k') );
+ * //// Output:
+ * // array(1) {
+ * // [0]=> string(2) "v1"
+ * // }
+ *
+ */
+ public function sRem($key, ...$member1)
+ {
+ }
+
+ /**
+ * @see sRem()
+ * @link https://redis.io/commands/srem
+ * @deprecated use Redis::sRem()
+ *
+ * @param string $key
+ * @param string|mixed ...$member1
+ */
+ public function sRemove($key, ...$member1)
+ {
+ }
+
+ /**
+ * Moves the specified member from the set at srcKey to the set at dstKey.
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ * @param string|mixed $member
+ *
+ * @return bool If the operation is successful, return TRUE.
+ * If the srcKey and/or dstKey didn't exist, and/or the member didn't exist in srcKey, FALSE is returned.
+ *
+ * @link https://redis.io/commands/smove
+ * @example
+ *
+ * $redis->sAdd('key1' , 'set11');
+ * $redis->sAdd('key1' , 'set12');
+ * $redis->sAdd('key1' , 'set13'); // 'key1' => {'set11', 'set12', 'set13'}
+ * $redis->sAdd('key2' , 'set21');
+ * $redis->sAdd('key2' , 'set22'); // 'key2' => {'set21', 'set22'}
+ * $redis->sMove('key1', 'key2', 'set13'); // 'key1' => {'set11', 'set12'}
+ * // 'key2' => {'set21', 'set22', 'set13'}
+ *
+ */
+ public function sMove($srcKey, $dstKey, $member)
+ {
+ }
+
+ /**
+ * Checks if value is a member of the set stored at the key key.
+ *
+ * @param string $key
+ * @param string|mixed $value
+ *
+ * @return bool TRUE if value is a member of the set at key key, FALSE otherwise
+ *
+ * @link https://redis.io/commands/sismember
+ * @example
+ *
+ * $redis->sAdd('key1' , 'set1');
+ * $redis->sAdd('key1' , 'set2');
+ * $redis->sAdd('key1' , 'set3'); // 'key1' => {'set1', 'set2', 'set3'}
+ *
+ * $redis->sIsMember('key1', 'set1'); // TRUE
+ * $redis->sIsMember('key1', 'setX'); // FALSE
+ *
+ */
+ public function sIsMember($key, $value)
+ {
+ }
+
+ /**
+ * @see sIsMember()
+ * @link https://redis.io/commands/sismember
+ * @deprecated use Redis::sIsMember()
+ *
+ * @param string $key
+ * @param string|mixed $value
+ */
+ public function sContains($key, $value)
+ {
+ }
+
+ /**
+ * Returns the cardinality of the set identified by key.
+ *
+ * @param string $key
+ *
+ * @return int the cardinality of the set identified by key, 0 if the set doesn't exist.
+ *
+ * @link https://redis.io/commands/scard
+ * @example
+ *
+ * $redis->sAdd('key1' , 'set1');
+ * $redis->sAdd('key1' , 'set2');
+ * $redis->sAdd('key1' , 'set3'); // 'key1' => {'set1', 'set2', 'set3'}
+ * $redis->sCard('key1'); // 3
+ * $redis->sCard('keyX'); // 0
+ *
+ */
+ public function sCard($key)
+ {
+ }
+
+ /**
+ * Removes and returns a random element from the set value at Key.
+ *
+ * @param string $key
+ * @param int $count [optional]
+ *
+ * @return string|mixed|array|bool "popped" values
+ * bool FALSE if set identified by key is empty or doesn't exist.
+ *
+ * @link https://redis.io/commands/spop
+ * @example
+ *
+ * $redis->sAdd('key1' , 'set1');
+ * $redis->sAdd('key1' , 'set2');
+ * $redis->sAdd('key1' , 'set3'); // 'key1' => {'set3', 'set1', 'set2'}
+ * $redis->sPop('key1'); // 'set1', 'key1' => {'set3', 'set2'}
+ * $redis->sPop('key1'); // 'set3', 'key1' => {'set2'}
+ *
+ * // With count
+ * $redis->sAdd('key2', 'set1', 'set2', 'set3');
+ * var_dump( $redis->sPop('key2', 3) ); // Will return all members but in no particular order
+ *
+ * // array(3) {
+ * // [0]=> string(4) "set2"
+ * // [1]=> string(4) "set3"
+ * // [2]=> string(4) "set1"
+ * // }
+ *
+ */
+ public function sPop($key, $count = 1)
+ {
+ }
+
+ /**
+ * Returns a random element(s) from the set value at Key, without removing it.
+ *
+ * @param string $key
+ * @param int $count [optional]
+ *
+ * @return string|mixed|array|bool value(s) from the set
+ * bool FALSE if set identified by key is empty or doesn't exist and count argument isn't passed.
+ *
+ * @link https://redis.io/commands/srandmember
+ * @example
+ *
+ * $redis->sAdd('key1' , 'one');
+ * $redis->sAdd('key1' , 'two');
+ * $redis->sAdd('key1' , 'three'); // 'key1' => {'one', 'two', 'three'}
+ *
+ * var_dump( $redis->sRandMember('key1') ); // 'key1' => {'one', 'two', 'three'}
+ *
+ * // string(5) "three"
+ *
+ * var_dump( $redis->sRandMember('key1', 2) ); // 'key1' => {'one', 'two', 'three'}
+ *
+ * // array(2) {
+ * // [0]=> string(2) "one"
+ * // [1]=> string(5) "three"
+ * // }
+ *
+ */
+ public function sRandMember($key, $count = 1)
+ {
+ }
+
+ /**
+ * Returns the members of a set resulting from the intersection of all the sets
+ * held at the specified keys. If just a single key is specified, then this command
+ * produces the members of this set. If one of the keys is missing, FALSE is returned.
+ *
+ * @param string $key1 keys identifying the different sets on which we will apply the intersection.
+ * @param string ...$otherKeys variadic list of keys
+ *
+ * @return array contain the result of the intersection between those keys
+ * If the intersection between the different sets is empty, the return value will be empty array.
+ *
+ * @link https://redis.io/commands/sinter
+ * @example
+ *
+ * $redis->sAdd('key1', 'val1');
+ * $redis->sAdd('key1', 'val2');
+ * $redis->sAdd('key1', 'val3');
+ * $redis->sAdd('key1', 'val4');
+ *
+ * $redis->sAdd('key2', 'val3');
+ * $redis->sAdd('key2', 'val4');
+ *
+ * $redis->sAdd('key3', 'val3');
+ * $redis->sAdd('key3', 'val4');
+ *
+ * var_dump($redis->sInter('key1', 'key2', 'key3'));
+ *
+ * //array(2) {
+ * // [0]=>
+ * // string(4) "val4"
+ * // [1]=>
+ * // string(4) "val3"
+ * //}
+ *
+ */
+ public function sInter($key1, ...$otherKeys)
+ {
+ }
+
+ /**
+ * Performs a sInter command and stores the result in a new set.
+ *
+ * @param string $dstKey the key to store the diff into.
+ * @param string $key1 keys identifying the different sets on which we will apply the intersection.
+ * @param string ...$otherKeys variadic list of keys
+ *
+ * @return int|bool The cardinality of the resulting set, or FALSE in case of a missing key
+ *
+ * @link https://redis.io/commands/sinterstore
+ * @example
+ *
+ * $redis->sAdd('key1', 'val1');
+ * $redis->sAdd('key1', 'val2');
+ * $redis->sAdd('key1', 'val3');
+ * $redis->sAdd('key1', 'val4');
+ *
+ * $redis->sAdd('key2', 'val3');
+ * $redis->sAdd('key2', 'val4');
+ *
+ * $redis->sAdd('key3', 'val3');
+ * $redis->sAdd('key3', 'val4');
+ *
+ * var_dump($redis->sInterStore('output', 'key1', 'key2', 'key3'));
+ * var_dump($redis->sMembers('output'));
+ *
+ * //int(2)
+ * //
+ * //array(2) {
+ * // [0]=>
+ * // string(4) "val4"
+ * // [1]=>
+ * // string(4) "val3"
+ * //}
+ *
+ */
+ public function sInterStore($dstKey, $key1, ...$otherKeys)
+ {
+ }
+
+ /**
+ * Performs the union between N sets and returns it.
+ *
+ * @param string $key1 first key for union
+ * @param string ...$otherKeys variadic list of keys corresponding to sets in redis
+ *
+ * @return array string[] The union of all these sets
+ *
+ * @link https://redis.io/commands/sunionstore
+ * @example
+ *
+ * $redis->sAdd('s0', '1');
+ * $redis->sAdd('s0', '2');
+ * $redis->sAdd('s1', '3');
+ * $redis->sAdd('s1', '1');
+ * $redis->sAdd('s2', '3');
+ * $redis->sAdd('s2', '4');
+ *
+ * var_dump($redis->sUnion('s0', 's1', 's2'));
+ *
+ * array(4) {
+ * // [0]=>
+ * // string(1) "3"
+ * // [1]=>
+ * // string(1) "4"
+ * // [2]=>
+ * // string(1) "1"
+ * // [3]=>
+ * // string(1) "2"
+ * //}
+ *
+ */
+ public function sUnion($key1, ...$otherKeys)
+ {
+ }
+
+ /**
+ * Performs the same action as sUnion, but stores the result in the first key
+ *
+ * @param string $dstKey the key to store the diff into.
+ * @param string $key1 first key for union
+ * @param string ...$otherKeys variadic list of keys corresponding to sets in redis
+ *
+ * @return int Any number of keys corresponding to sets in redis
+ *
+ * @link https://redis.io/commands/sunionstore
+ * @example
+ *
+ * $redis->del('s0', 's1', 's2');
+ *
+ * $redis->sAdd('s0', '1');
+ * $redis->sAdd('s0', '2');
+ * $redis->sAdd('s1', '3');
+ * $redis->sAdd('s1', '1');
+ * $redis->sAdd('s2', '3');
+ * $redis->sAdd('s2', '4');
+ *
+ * var_dump($redis->sUnionStore('dst', 's0', 's1', 's2'));
+ * var_dump($redis->sMembers('dst'));
+ *
+ * //int(4)
+ * //array(4) {
+ * // [0]=>
+ * // string(1) "3"
+ * // [1]=>
+ * // string(1) "4"
+ * // [2]=>
+ * // string(1) "1"
+ * // [3]=>
+ * // string(1) "2"
+ * //}
+ *
+ */
+ public function sUnionStore($dstKey, $key1, ...$otherKeys)
+ {
+ }
+
+ /**
+ * Performs the difference between N sets and returns it.
+ *
+ * @param string $key1 first key for diff
+ * @param string ...$otherKeys variadic list of keys corresponding to sets in redis
+ *
+ * @return array string[] The difference of the first set will all the others
+ *
+ * @link https://redis.io/commands/sdiff
+ * @example
+ *
+ * $redis->del('s0', 's1', 's2');
+ *
+ * $redis->sAdd('s0', '1');
+ * $redis->sAdd('s0', '2');
+ * $redis->sAdd('s0', '3');
+ * $redis->sAdd('s0', '4');
+ *
+ * $redis->sAdd('s1', '1');
+ * $redis->sAdd('s2', '3');
+ *
+ * var_dump($redis->sDiff('s0', 's1', 's2'));
+ *
+ * //array(2) {
+ * // [0]=>
+ * // string(1) "4"
+ * // [1]=>
+ * // string(1) "2"
+ * //}
+ *
+ */
+ public function sDiff($key1, ...$otherKeys)
+ {
+ }
+
+ /**
+ * Performs the same action as sDiff, but stores the result in the first key
+ *
+ * @param string $dstKey the key to store the diff into.
+ * @param string $key1 first key for diff
+ * @param string ...$otherKeys variadic list of keys corresponding to sets in redis
+ *
+ * @return int|bool The cardinality of the resulting set, or FALSE in case of a missing key
+ *
+ * @link https://redis.io/commands/sdiffstore
+ * @example
+ *
+ * $redis->del('s0', 's1', 's2');
+ *
+ * $redis->sAdd('s0', '1');
+ * $redis->sAdd('s0', '2');
+ * $redis->sAdd('s0', '3');
+ * $redis->sAdd('s0', '4');
+ *
+ * $redis->sAdd('s1', '1');
+ * $redis->sAdd('s2', '3');
+ *
+ * var_dump($redis->sDiffStore('dst', 's0', 's1', 's2'));
+ * var_dump($redis->sMembers('dst'));
+ *
+ * //int(2)
+ * //array(2) {
+ * // [0]=>
+ * // string(1) "4"
+ * // [1]=>
+ * // string(1) "2"
+ * //}
+ *
+ */
+ public function sDiffStore($dstKey, $key1, ...$otherKeys)
+ {
+ }
+
+ /**
+ * Returns the contents of a set.
+ *
+ * @param string $key
+ *
+ * @return array An array of elements, the contents of the set
+ *
+ * @link https://redis.io/commands/smembers
+ * @example
+ *
+ * $redis->del('s');
+ * $redis->sAdd('s', 'a');
+ * $redis->sAdd('s', 'b');
+ * $redis->sAdd('s', 'a');
+ * $redis->sAdd('s', 'c');
+ * var_dump($redis->sMembers('s'));
+ *
+ * //array(3) {
+ * // [0]=>
+ * // string(1) "c"
+ * // [1]=>
+ * // string(1) "a"
+ * // [2]=>
+ * // string(1) "b"
+ * //}
+ * // The order is random and corresponds to redis' own internal representation of the set structure.
+ *
+ */
+ public function sMembers($key)
+ {
+ }
+
+ /**
+ * @see sMembers()
+ * @link https://redis.io/commands/smembers
+ * @deprecated use Redis::sMembers()
+ *
+ * @param string $key
+ * @return array An array of elements, the contents of the set
+ */
+ public function sGetMembers($key)
+ {
+ }
+
+ /**
+ * Scan a set for members
+ *
+ * @param string $key The set to search.
+ * @param int $iterator LONG (reference) to the iterator as we go.
+ * @param string $pattern String, optional pattern to match against.
+ * @param int $count How many members to return at a time (Redis might return a different amount)
+ *
+ * @return array|bool PHPRedis will return an array of keys or FALSE when we're done iterating
+ *
+ * @link https://redis.io/commands/sscan
+ * @example
+ *
+ * $iterator = null;
+ * while ($members = $redis->sScan('set', $iterator)) {
+ * foreach ($members as $member) {
+ * echo $member . PHP_EOL;
+ * }
+ * }
+ *
+ */
+ public function sScan($key, &$iterator, $pattern = null, $count = 0)
+ {
+ }
+
+ /**
+ * Sets a value and returns the previous entry at that key.
+ *
+ * @param string $key
+ * @param string|mixed $value
+ *
+ * @return string|mixed A string (mixed, if used serializer), the previous value located at this key
+ *
+ * @link https://redis.io/commands/getset
+ * @example
+ *
+ * $redis->set('x', '42');
+ * $exValue = $redis->getSet('x', 'lol'); // return '42', replaces x by 'lol'
+ * $newValue = $redis->get('x')' // return 'lol'
+ *
+ */
+ public function getSet($key, $value)
+ {
+ }
+
+ /**
+ * Returns a random key
+ *
+ * @return string an existing key in redis
+ *
+ * @link https://redis.io/commands/randomkey
+ * @example
+ * + * $key = $redis->randomKey(); + * $surprise = $redis->get($key); // who knows what's in there. + *+ */ + public function randomKey() + { + } + + /** + * Switches to a given database + * + * @param int $dbIndex + * + * @return bool TRUE in case of success, FALSE in case of failure + * + * @link https://redis.io/commands/select + * @example + *
+ * $redis->select(0); // switch to DB 0
+ * $redis->set('x', '42'); // write 42 to x
+ * $redis->move('x', 1); // move to DB 1
+ * $redis->select(1); // switch to DB 1
+ * $redis->get('x'); // will return 42
+ *
+ */
+ public function select($dbIndex)
+ {
+ }
+
+ /**
+ * Moves a key to a different database.
+ *
+ * @param string $key
+ * @param int $dbIndex
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/move
+ * @example
+ *
+ * $redis->select(0); // switch to DB 0
+ * $redis->set('x', '42'); // write 42 to x
+ * $redis->move('x', 1); // move to DB 1
+ * $redis->select(1); // switch to DB 1
+ * $redis->get('x'); // will return 42
+ *
+ */
+ public function move($key, $dbIndex)
+ {
+ }
+
+ /**
+ * Renames a key
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/rename
+ * @example
+ *
+ * $redis->set('x', '42');
+ * $redis->rename('x', 'y');
+ * $redis->get('y'); // → 42
+ * $redis->get('x'); // → `FALSE`
+ *
+ */
+ public function rename($srcKey, $dstKey)
+ {
+ }
+
+ /**
+ * @see rename()
+ * @link https://redis.io/commands/rename
+ * @deprecated use Redis::rename()
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ */
+ public function renameKey($srcKey, $dstKey)
+ {
+ }
+
+ /**
+ * Renames a key
+ *
+ * Same as rename, but will not replace a key if the destination already exists.
+ * This is the same behaviour as setNx.
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/renamenx
+ * @example
+ *
+ * $redis->set('x', '42');
+ * $redis->rename('x', 'y');
+ * $redis->get('y'); // → 42
+ * $redis->get('x'); // → `FALSE`
+ *
+ */
+ public function renameNx($srcKey, $dstKey)
+ {
+ }
+
+ /**
+ * Sets an expiration date (a timeout) on an item
+ *
+ * @param string $key The key that will disappear
+ * @param int $ttl The key's remaining Time To Live, in seconds
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/expire
+ * @example
+ *
+ * $redis->set('x', '42');
+ * $redis->expire('x', 3); // x will disappear in 3 seconds.
+ * sleep(5); // wait 5 seconds
+ * $redis->get('x'); // will return `FALSE`, as 'x' has expired.
+ *
+ */
+ public function expire($key, $ttl)
+ {
+ }
+
+ /**
+ * Sets an expiration date (a timeout in milliseconds) on an item
+ *
+ * @param string $key The key that will disappear.
+ * @param int $ttl The key's remaining Time To Live, in milliseconds
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/pexpire
+ * @example
+ *
+ * $redis->set('x', '42');
+ * $redis->pExpire('x', 11500); // x will disappear in 11500 milliseconds.
+ * $redis->ttl('x'); // 12
+ * $redis->pttl('x'); // 11500
+ *
+ */
+ public function pExpire($key, $ttl)
+ {
+ }
+
+ /**
+ * @see expire()
+ * @link https://redis.io/commands/expire
+ * @deprecated use Redis::expire()
+ *
+ * @param string $key
+ * @param int $ttl
+ * @return bool
+ */
+ public function setTimeout($key, $ttl)
+ {
+ }
+
+ /**
+ * Sets an expiration date (a timestamp) on an item.
+ *
+ * @param string $key The key that will disappear.
+ * @param int $timestamp Unix timestamp. The key's date of death, in seconds from Epoch time.
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/expireat
+ * @example
+ *
+ * $redis->set('x', '42');
+ * $now = time(NULL); // current timestamp
+ * $redis->expireAt('x', $now + 3); // x will disappear in 3 seconds.
+ * sleep(5); // wait 5 seconds
+ * $redis->get('x'); // will return `FALSE`, as 'x' has expired.
+ *
+ */
+ public function expireAt($key, $timestamp)
+ {
+ }
+
+ /**
+ * Sets an expiration date (a timestamp) on an item. Requires a timestamp in milliseconds
+ *
+ * @param string $key The key that will disappear
+ * @param int $timestamp Unix timestamp. The key's date of death, in seconds from Epoch time
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/pexpireat
+ * @example
+ *
+ * $redis->set('x', '42');
+ * $redis->pExpireAt('x', 1555555555005);
+ * echo $redis->ttl('x'); // 218270121
+ * echo $redis->pttl('x'); // 218270120575
+ *
+ */
+ public function pExpireAt($key, $timestamp)
+ {
+ }
+
+ /**
+ * Returns the keys that match a certain pattern.
+ *
+ * @param string $pattern pattern, using '*' as a wildcard
+ *
+ * @return array string[] The keys that match a certain pattern.
+ *
+ * @link https://redis.io/commands/keys
+ * @example
+ *
+ * $allKeys = $redis->keys('*'); // all keys will match this.
+ * $keyWithUserPrefix = $redis->keys('user*');
+ *
+ */
+ public function keys($pattern)
+ {
+ }
+
+ /**
+ * @see keys()
+ * @deprecated use Redis::keys()
+ *
+ * @param string $pattern
+ * @link https://redis.io/commands/keys
+ */
+ public function getKeys($pattern)
+ {
+ }
+
+ /**
+ * Returns the current database's size
+ *
+ * @return int DB size, in number of keys
+ *
+ * @link https://redis.io/commands/dbsize
+ * @example
+ * + * $count = $redis->dbSize(); + * echo "Redis has $count keys\n"; + *+ */ + public function dbSize() + { + } + + /** + * Authenticate the connection using a password. + * Warning: The password is sent in plain-text over the network. + * + * @param string $password + * + * @return bool TRUE if the connection is authenticated, FALSE otherwise + * + * @link https://redis.io/commands/auth + * @example $redis->auth('foobared'); + */ + public function auth($password) + { + } + + /** + * Starts the background rewrite of AOF (Append-Only File) + * + * @return bool TRUE in case of success, FALSE in case of failure + * + * @link https://redis.io/commands/bgrewriteaof + * @example $redis->bgrewriteaof(); + */ + public function bgrewriteaof() + { + } + + /** + * Changes the slave status + * Either host and port, or no parameter to stop being a slave. + * + * @param string $host [optional] + * @param int $port [optional] + * + * @return bool TRUE in case of success, FALSE in case of failure + * + * @link https://redis.io/commands/slaveof + * @example + *
+ * $redis->slaveof('10.0.1.7', 6379);
+ * // ...
+ * $redis->slaveof();
+ *
+ */
+ public function slaveof($host = '127.0.0.1', $port = 6379)
+ {
+ }
+
+ /**
+ * Access the Redis slowLog
+ *
+ * @param string $operation This can be either GET, LEN, or RESET
+ * @param int|null $length If executing a SLOWLOG GET command, you can pass an optional length.
+ *
+ * @return mixed The return value of SLOWLOG will depend on which operation was performed.
+ * - SLOWLOG GET: Array of slowLog entries, as provided by Redis
+ * - SLOGLOG LEN: Integer, the length of the slowLog
+ * - SLOWLOG RESET: Boolean, depending on success
+ *
+ * @example
+ *
+ * // Get ten slowLog entries
+ * $redis->slowLog('get', 10);
+ * // Get the default number of slowLog entries
+ *
+ * $redis->slowLog('get');
+ * // Reset our slowLog
+ * $redis->slowLog('reset');
+ *
+ * // Retrieve slowLog length
+ * $redis->slowLog('len');
+ *
+ *
+ * @link https://redis.io/commands/slowlog
+ */
+ public function slowLog(string $operation, int $length = null)
+ {
+ }
+
+
+ /**
+ * Describes the object pointed to by a key.
+ * The information to retrieve (string) and the key (string).
+ * Info can be one of the following:
+ * - "encoding"
+ * - "refcount"
+ * - "idletime"
+ *
+ * @param string $string
+ * @param string $key
+ *
+ * @return string|int|bool for "encoding", int for "refcount" and "idletime", FALSE if the key doesn't exist.
+ *
+ * @link https://redis.io/commands/object
+ * @example
+ *
+ * $redis->lPush('l', 'Hello, world!');
+ * $redis->object("encoding", "l"); // → ziplist
+ * $redis->object("refcount", "l"); // → 1
+ * $redis->object("idletime", "l"); // → 400 (in seconds, with a precision of 10 seconds).
+ *
+ */
+ public function object($string = '', $key = '')
+ {
+ }
+
+ /**
+ * Performs a synchronous save.
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ * If a save is already running, this command will fail and return FALSE.
+ *
+ * @link https://redis.io/commands/save
+ * @example $redis->save();
+ */
+ public function save()
+ {
+ }
+
+ /**
+ * Performs a background save.
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ * If a save is already running, this command will fail and return FALSE
+ *
+ * @link https://redis.io/commands/bgsave
+ * @example $redis->bgSave();
+ */
+ public function bgsave()
+ {
+ }
+
+ /**
+ * Returns the timestamp of the last disk save.
+ *
+ * @return int timestamp
+ *
+ * @link https://redis.io/commands/lastsave
+ * @example $redis->lastSave();
+ */
+ public function lastSave()
+ {
+ }
+
+ /**
+ * Blocks the current client until all the previous write commands are successfully transferred and
+ * acknowledged by at least the specified number of slaves.
+ *
+ * @param int $numSlaves Number of slaves that need to acknowledge previous write commands.
+ * @param int $timeout Timeout in milliseconds.
+ *
+ * @return int The command returns the number of slaves reached by all the writes performed in the
+ * context of the current connection
+ *
+ * @link https://redis.io/commands/wait
+ * @example $redis->wait(2, 1000);
+ */
+ public function wait($numSlaves, $timeout)
+ {
+ }
+
+ /**
+ * Returns the type of data pointed by a given key.
+ *
+ * @param string $key
+ *
+ * @return int
+ * Depending on the type of the data pointed by the key,
+ * this method will return the following value:
+ * - string: Redis::REDIS_STRING
+ * - set: Redis::REDIS_SET
+ * - list: Redis::REDIS_LIST
+ * - zset: Redis::REDIS_ZSET
+ * - hash: Redis::REDIS_HASH
+ * - other: Redis::REDIS_NOT_FOUND
+ *
+ * @link https://redis.io/commands/type
+ * @example $redis->type('key');
+ */
+ public function type($key)
+ {
+ }
+
+ /**
+ * Append specified string to the string stored in specified key.
+ *
+ * @param string $key
+ * @param string|mixed $value
+ *
+ * @return int Size of the value after the append
+ *
+ * @link https://redis.io/commands/append
+ * @example
+ *
+ * $redis->set('key', 'value1');
+ * $redis->append('key', 'value2'); // 12
+ * $redis->get('key'); // 'value1value2'
+ *
+ */
+ public function append($key, $value)
+ {
+ }
+
+ /**
+ * Return a substring of a larger string
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ *
+ * @return string the substring
+ *
+ * @link https://redis.io/commands/getrange
+ * @example
+ *
+ * $redis->set('key', 'string value');
+ * $redis->getRange('key', 0, 5); // 'string'
+ * $redis->getRange('key', -5, -1); // 'value'
+ *
+ */
+ public function getRange($key, $start, $end)
+ {
+ }
+
+ /**
+ * Return a substring of a larger string
+ *
+ * @deprecated
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ */
+ public function substr($key, $start, $end)
+ {
+ }
+
+ /**
+ * Changes a substring of a larger string.
+ *
+ * @param string $key
+ * @param int $offset
+ * @param string $value
+ *
+ * @return int the length of the string after it was modified
+ *
+ * @link https://redis.io/commands/setrange
+ * @example
+ *
+ * $redis->set('key', 'Hello world');
+ * $redis->setRange('key', 6, "redis"); // returns 11
+ * $redis->get('key'); // "Hello redis"
+ *
+ */
+ public function setRange($key, $offset, $value)
+ {
+ }
+
+ /**
+ * Get the length of a string value.
+ *
+ * @param string $key
+ * @return int
+ *
+ * @link https://redis.io/commands/strlen
+ * @example
+ *
+ * $redis->set('key', 'value');
+ * $redis->strlen('key'); // 5
+ *
+ */
+ public function strlen($key)
+ {
+ }
+
+ /**
+ * Return the position of the first bit set to 1 or 0 in a string. The position is returned, thinking of the
+ * string as an array of bits from left to right, where the first byte's most significant bit is at position 0,
+ * the second byte's most significant bit is at position 8, and so forth.
+ *
+ * @param string $key
+ * @param int $bit
+ * @param int $start
+ * @param int $end
+ *
+ * @return int The command returns the position of the first bit set to 1 or 0 according to the request.
+ * If we look for set bits (the bit argument is 1) and the string is empty or composed of just
+ * zero bytes, -1 is returned. If we look for clear bits (the bit argument is 0) and the string
+ * only contains bit set to 1, the function returns the first bit not part of the string on the
+ * right. So if the string is three bytes set to the value 0xff the command BITPOS key 0 will
+ * return 24, since up to bit 23 all the bits are 1. Basically, the function considers the right
+ * of the string as padded with zeros if you look for clear bits and specify no range or the
+ * start argument only. However, this behavior changes if you are looking for clear bits and
+ * specify a range with both start and end. If no clear bit is found in the specified range, the
+ * function returns -1 as the user specified a clear range and there are no 0 bits in that range.
+ *
+ * @link https://redis.io/commands/bitpos
+ * @example
+ *
+ * $redis->set('key', '\xff\xff');
+ * $redis->bitpos('key', 1); // int(0)
+ * $redis->bitpos('key', 1, 1); // int(8)
+ * $redis->bitpos('key', 1, 3); // int(-1)
+ * $redis->bitpos('key', 0); // int(16)
+ * $redis->bitpos('key', 0, 1); // int(16)
+ * $redis->bitpos('key', 0, 1, 5); // int(-1)
+ *
+ */
+ public function bitpos($key, $bit, $start = 0, $end = null)
+ {
+ }
+
+ /**
+ * Return a single bit out of a larger string
+ *
+ * @param string $key
+ * @param int $offset
+ *
+ * @return int the bit value (0 or 1)
+ *
+ * @link https://redis.io/commands/getbit
+ * @example
+ *
+ * $redis->set('key', "\x7f"); // this is 0111 1111
+ * $redis->getBit('key', 0); // 0
+ * $redis->getBit('key', 1); // 1
+ *
+ */
+ public function getBit($key, $offset)
+ {
+ }
+
+ /**
+ * Changes a single bit of a string.
+ *
+ * @param string $key
+ * @param int $offset
+ * @param bool|int $value bool or int (1 or 0)
+ *
+ * @return int 0 or 1, the value of the bit before it was set
+ *
+ * @link https://redis.io/commands/setbit
+ * @example
+ *
+ * $redis->set('key', "*"); // ord("*") = 42 = 0x2f = "0010 1010"
+ * $redis->setBit('key', 5, 1); // returns 0
+ * $redis->setBit('key', 7, 1); // returns 0
+ * $redis->get('key'); // chr(0x2f) = "/" = b("0010 1111")
+ *
+ */
+ public function setBit($key, $offset, $value)
+ {
+ }
+
+ /**
+ * Count bits in a string
+ *
+ * @param string $key
+ *
+ * @return int The number of bits set to 1 in the value behind the input key
+ *
+ * @link https://redis.io/commands/bitcount
+ * @example
+ *
+ * $redis->set('bit', '345'); // // 11 0011 0011 0100 0011 0101
+ * var_dump( $redis->bitCount('bit', 0, 0) ); // int(4)
+ * var_dump( $redis->bitCount('bit', 1, 1) ); // int(3)
+ * var_dump( $redis->bitCount('bit', 2, 2) ); // int(4)
+ * var_dump( $redis->bitCount('bit', 0, 2) ); // int(11)
+ *
+ */
+ public function bitCount($key)
+ {
+ }
+
+ /**
+ * Bitwise operation on multiple keys.
+ *
+ * @param string $operation either "AND", "OR", "NOT", "XOR"
+ * @param string $retKey return key
+ * @param string $key1 first key
+ * @param string ...$otherKeys variadic list of keys
+ *
+ * @return int The size of the string stored in the destination key
+ *
+ * @link https://redis.io/commands/bitop
+ * @example
+ *
+ * $redis->set('bit1', '1'); // 11 0001
+ * $redis->set('bit2', '2'); // 11 0010
+ *
+ * $redis->bitOp('AND', 'bit', 'bit1', 'bit2'); // bit = 110000
+ * $redis->bitOp('OR', 'bit', 'bit1', 'bit2'); // bit = 110011
+ * $redis->bitOp('NOT', 'bit', 'bit1', 'bit2'); // bit = 110011
+ * $redis->bitOp('XOR', 'bit', 'bit1', 'bit2'); // bit = 11
+ *
+ */
+ public function bitOp($operation, $retKey, $key1, ...$otherKeys)
+ {
+ }
+
+ /**
+ * Removes all entries from the current database.
+ *
+ * @return bool Always TRUE
+ * @link https://redis.io/commands/flushdb
+ * @example $redis->flushDB();
+ */
+ public function flushDB()
+ {
+ }
+
+ /**
+ * Removes all entries from all databases.
+ *
+ * @return bool Always TRUE
+ *
+ * @link https://redis.io/commands/flushall
+ * @example $redis->flushAll();
+ */
+ public function flushAll()
+ {
+ }
+
+ /**
+ * Sort
+ *
+ * @param string $key
+ * @param array $option array(key => value, ...) - optional, with the following keys and values:
+ * - 'by' => 'some_pattern_*',
+ * - 'limit' => array(0, 1),
+ * - 'get' => 'some_other_pattern_*' or an array of patterns,
+ * - 'sort' => 'asc' or 'desc',
+ * - 'alpha' => TRUE,
+ * - 'store' => 'external-key'
+ *
+ * @return array
+ * An array of values, or a number corresponding to the number of elements stored if that was used
+ *
+ * @link https://redis.io/commands/sort
+ * @example
+ *
+ * $redis->del('s');
+ * $redis->sadd('s', 5);
+ * $redis->sadd('s', 4);
+ * $redis->sadd('s', 2);
+ * $redis->sadd('s', 1);
+ * $redis->sadd('s', 3);
+ *
+ * var_dump($redis->sort('s')); // 1,2,3,4,5
+ * var_dump($redis->sort('s', array('sort' => 'desc'))); // 5,4,3,2,1
+ * var_dump($redis->sort('s', array('sort' => 'desc', 'store' => 'out'))); // (int)5
+ *
+ */
+ public function sort($key, $option = null)
+ {
+ }
+
+ /**
+ * Returns an associative array of strings and integers
+ *
+ * @param string $option Optional. The option to provide redis.
+ * SERVER | CLIENTS | MEMORY | PERSISTENCE | STATS | REPLICATION | CPU | CLASTER | KEYSPACE | COMANDSTATS
+ *
+ * Returns an associative array of strings and integers, with the following keys:
+ * - redis_version
+ * - redis_git_sha1
+ * - redis_git_dirty
+ * - arch_bits
+ * - multiplexing_api
+ * - process_id
+ * - uptime_in_seconds
+ * - uptime_in_days
+ * - lru_clock
+ * - used_cpu_sys
+ * - used_cpu_user
+ * - used_cpu_sys_children
+ * - used_cpu_user_children
+ * - connected_clients
+ * - connected_slaves
+ * - client_longest_output_list
+ * - client_biggest_input_buf
+ * - blocked_clients
+ * - used_memory
+ * - used_memory_human
+ * - used_memory_peak
+ * - used_memory_peak_human
+ * - mem_fragmentation_ratio
+ * - mem_allocator
+ * - loading
+ * - aof_enabled
+ * - changes_since_last_save
+ * - bgsave_in_progress
+ * - last_save_time
+ * - total_connections_received
+ * - total_commands_processed
+ * - expired_keys
+ * - evicted_keys
+ * - keyspace_hits
+ * - keyspace_misses
+ * - hash_max_zipmap_entries
+ * - hash_max_zipmap_value
+ * - pubsub_channels
+ * - pubsub_patterns
+ * - latest_fork_usec
+ * - vm_enabled
+ * - role
+ *
+ * @return string
+ *
+ * @link https://redis.io/commands/info
+ * @example
+ *
+ * $redis->info();
+ *
+ * or
+ *
+ * $redis->info("COMMANDSTATS"); //Information on the commands that have been run (>=2.6 only)
+ * $redis->info("CPU"); // just CPU information from Redis INFO
+ *
+ */
+ public function info($option = null)
+ {
+ }
+
+ /**
+ * Resets the statistics reported by Redis using the INFO command (`info()` function).
+ * These are the counters that are reset:
+ * - Keyspace hits
+ * - Keyspace misses
+ * - Number of commands processed
+ * - Number of connections received
+ * - Number of expired keys
+ *
+ * @return bool `TRUE` in case of success, `FALSE` in case of failure.
+ *
+ * @example $redis->resetStat();
+ * @link https://redis.io/commands/config-resetstat
+ */
+ public function resetStat()
+ {
+ }
+
+ /**
+ * Returns the time to live left for a given key, in seconds. If the key doesn't exist, FALSE is returned.
+ *
+ * @param string $key
+ *
+ * @return int|bool the time left to live in seconds
+ *
+ * @link https://redis.io/commands/ttl
+ * @example
+ *
+ * $redis->setex('key', 123, 'test');
+ * $redis->ttl('key'); // int(123)
+ *
+ */
+ public function ttl($key)
+ {
+ }
+
+ /**
+ * Returns a time to live left for a given key, in milliseconds.
+ *
+ * If the key doesn't exist, FALSE is returned.
+ *
+ * @param string $key
+ *
+ * @return int|bool the time left to live in milliseconds
+ *
+ * @link https://redis.io/commands/pttl
+ * @example
+ *
+ * $redis->setex('key', 123, 'test');
+ * $redis->pttl('key'); // int(122999)
+ *
+ */
+ public function pttl($key)
+ {
+ }
+
+ /**
+ * Remove the expiration timer from a key.
+ *
+ * @param string $key
+ *
+ * @return bool TRUE if a timeout was removed, FALSE if the key didn’t exist or didn’t have an expiration timer.
+ *
+ * @link https://redis.io/commands/persist
+ * @example $redis->persist('key');
+ */
+ public function persist($key)
+ {
+ }
+
+ /**
+ * Sets multiple key-value pairs in one atomic command.
+ * MSETNX only returns TRUE if all the keys were set (see SETNX).
+ *
+ * @param array $array Pairs: array(key => value, ...)
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure
+ *
+ * @link https://redis.io/commands/mset
+ * @example
+ *
+ * $redis->mset(array('key0' => 'value0', 'key1' => 'value1'));
+ * var_dump($redis->get('key0'));
+ * var_dump($redis->get('key1'));
+ * // Output:
+ * // string(6) "value0"
+ * // string(6) "value1"
+ *
+ */
+ public function mset(array $array)
+ {
+ }
+
+ /**
+ * Get the values of all the specified keys.
+ * If one or more keys dont exist, the array will contain FALSE at the position of the key.
+ *
+ * @param array $keys Array containing the list of the keys
+ *
+ * @return array Array containing the values related to keys in argument
+ *
+ * @deprecated use Redis::mGet()
+ * @example
+ *
+ * $redis->set('key1', 'value1');
+ * $redis->set('key2', 'value2');
+ * $redis->set('key3', 'value3');
+ * $redis->getMultiple(array('key1', 'key2', 'key3')); // array('value1', 'value2', 'value3');
+ * $redis->getMultiple(array('key0', 'key1', 'key5')); // array(`FALSE`, 'value2', `FALSE`);
+ *
+ */
+ public function getMultiple(array $keys)
+ {
+ }
+
+ /**
+ * Returns the values of all specified keys.
+ *
+ * For every key that does not hold a string value or does not exist,
+ * the special value false is returned. Because of this, the operation never fails.
+ *
+ * @param array $array
+ *
+ * @return array
+ *
+ * @link https://redis.io/commands/mget
+ * @example
+ *
+ * $redis->del('x', 'y', 'z', 'h'); // remove x y z
+ * $redis->mset(array('x' => 'a', 'y' => 'b', 'z' => 'c'));
+ * $redis->hset('h', 'field', 'value');
+ * var_dump($redis->mget(array('x', 'y', 'z', 'h')));
+ * // Output:
+ * // array(3) {
+ * // [0]=> string(1) "a"
+ * // [1]=> string(1) "b"
+ * // [2]=> string(1) "c"
+ * // [3]=> bool(false)
+ * // }
+ *
+ */
+ public function mget(array $array)
+ {
+ }
+
+ /**
+ * @see mset()
+ * @param array $array
+ * @return int 1 (if the keys were set) or 0 (no key was set)
+ *
+ * @link https://redis.io/commands/msetnx
+ */
+ public function msetnx(array $array)
+ {
+ }
+
+ /**
+ * Pops a value from the tail of a list, and pushes it to the front of another list.
+ * Also return this value.
+ *
+ * @since redis >= 1.1
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ *
+ * @return string|mixed|bool The element that was moved in case of success, FALSE in case of failure.
+ *
+ * @link https://redis.io/commands/rpoplpush
+ * @example
+ *
+ * $redis->del('x', 'y');
+ *
+ * $redis->lPush('x', 'abc');
+ * $redis->lPush('x', 'def');
+ * $redis->lPush('y', '123');
+ * $redis->lPush('y', '456');
+ *
+ * // move the last of x to the front of y.
+ * var_dump($redis->rpoplpush('x', 'y'));
+ * var_dump($redis->lRange('x', 0, -1));
+ * var_dump($redis->lRange('y', 0, -1));
+ *
+ * //Output:
+ * //
+ * //string(3) "abc"
+ * //array(1) {
+ * // [0]=>
+ * // string(3) "def"
+ * //}
+ * //array(3) {
+ * // [0]=>
+ * // string(3) "abc"
+ * // [1]=>
+ * // string(3) "456"
+ * // [2]=>
+ * // string(3) "123"
+ * //}
+ *
+ */
+ public function rpoplpush($srcKey, $dstKey)
+ {
+ }
+
+ /**
+ * A blocking version of rpoplpush, with an integral timeout in the third parameter.
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ * @param int $timeout
+ *
+ * @return string|mixed|bool The element that was moved in case of success, FALSE in case of timeout
+ *
+ * @link https://redis.io/commands/brpoplpush
+ */
+ public function brpoplpush($srcKey, $dstKey, $timeout)
+ {
+ }
+
+ /**
+ * Adds the specified member with a given score to the sorted set stored at key
+ *
+ * @param string $key Required key
+ * @param array|float $options Options if needed or score if omitted
+ * @param float|string|mixed $score1 Required score or value if options omitted
+ * @param string|float|mixed $value1 Required value or optional score if options omitted
+ * @param float|string|mixed $score2 Optional score or value if options omitted
+ * @param string|float|mixed $value2 Optional value or score if options omitted
+ * @param float|string|mixed $scoreN Optional score or value if options omitted
+ * @param string|float|mixed $valueN Optional value or score if options omitted
+ *
+ * @return int Number of values added
+ *
+ * @link https://redis.io/commands/zadd
+ * @example
+ *
+ *
+ * $redis->zAdd('z', 1, 'v1', 2, 'v2', 3, 'v3', 4, 'v4' ); // int(2)
+ * $redis->zRem('z', 'v2', 'v3'); // int(2)
+ * $redis->zAdd('z', ['NX'], 5, 'v5'); // int(1)
+ * $redis->zAdd('z', ['NX'], 6, 'v5'); // int(0)
+ * $redis->zAdd('z', 7, 'v6'); // int(1)
+ * $redis->zAdd('z', 8, 'v6'); // int(0)
+ *
+ * var_dump( $redis->zRange('z', 0, -1) );
+ * // Output:
+ * // array(4) {
+ * // [0]=> string(2) "v1"
+ * // [1]=> string(2) "v4"
+ * // [2]=> string(2) "v5"
+ * // [3]=> string(2) "v8"
+ * // }
+ *
+ * var_dump( $redis->zRange('z', 0, -1, true) );
+ * // Output:
+ * // array(4) {
+ * // ["v1"]=> float(1)
+ * // ["v4"]=> float(4)
+ * // ["v5"]=> float(5)
+ * // ["v6"]=> float(8)
+ *
+ *
+ */
+ public function zAdd($key, $options, $score1, $value1 = null, $score2 = null, $value2 = null, $scoreN = null, $valueN = null)
+ {
+ }
+
+ /**
+ * Returns a range of elements from the ordered set stored at the specified key,
+ * with values in the range [start, end]. start and stop are interpreted as zero-based indices:
+ * 0 the first element,
+ * 1 the second ...
+ * -1 the last element,
+ * -2 the penultimate ...
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @param bool $withscores
+ *
+ * @return array Array containing the values in specified range.
+ *
+ * @link https://redis.io/commands/zrange
+ * @example
+ *
+ * $redis->zAdd('key1', 0, 'val0');
+ * $redis->zAdd('key1', 2, 'val2');
+ * $redis->zAdd('key1', 10, 'val10');
+ * $redis->zRange('key1', 0, -1); // array('val0', 'val2', 'val10')
+ * // with scores
+ * $redis->zRange('key1', 0, -1, true); // array('val0' => 0, 'val2' => 2, 'val10' => 10)
+ *
+ */
+ public function zRange($key, $start, $end, $withscores = null)
+ {
+ }
+
+ /**
+ * Deletes a specified member from the ordered set.
+ *
+ * @param string $key
+ * @param string|mixed $member1
+ * @param string|mixed ...$otherMembers
+ *
+ * @return int Number of deleted values
+ *
+ * @link https://redis.io/commands/zrem
+ * @example
+ *
+ * $redis->zAdd('z', 1, 'v1', 2, 'v2', 3, 'v3', 4, 'v4' ); // int(2)
+ * $redis->zRem('z', 'v2', 'v3'); // int(2)
+ * var_dump( $redis->zRange('z', 0, -1) );
+ * //// Output:
+ * // array(2) {
+ * // [0]=> string(2) "v1"
+ * // [1]=> string(2) "v4"
+ * // }
+ *
+ */
+ public function zRem($key, $member1, ...$otherMembers)
+ {
+ }
+
+ /**
+ * @see zRem()
+ * @link https://redis.io/commands/zrem
+ * @deprecated use Redis::zRem()
+ *
+ * @param string $key
+ * @param string|mixed $member1
+ * @param string|mixed ...$otherMembers
+ *
+ * @return int Number of deleted values
+ */
+ public function zDelete($key, $member1, ...$otherMembers)
+ {
+ }
+
+ /**
+ * Returns the elements of the sorted set stored at the specified key in the range [start, end]
+ * in reverse order. start and stop are interpretated as zero-based indices:
+ * 0 the first element,
+ * 1 the second ...
+ * -1 the last element,
+ * -2 the penultimate ...
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @param bool $withscore
+ *
+ * @return array Array containing the values in specified range.
+ *
+ * @link https://redis.io/commands/zrevrange
+ * @example
+ *
+ * $redis->zAdd('key', 0, 'val0');
+ * $redis->zAdd('key', 2, 'val2');
+ * $redis->zAdd('key', 10, 'val10');
+ * $redis->zRevRange('key', 0, -1); // array('val10', 'val2', 'val0')
+ *
+ * // with scores
+ * $redis->zRevRange('key', 0, -1, true); // array('val10' => 10, 'val2' => 2, 'val0' => 0)
+ *
+ */
+ public function zRevRange($key, $start, $end, $withscore = null)
+ {
+ }
+
+ /**
+ * Returns the elements of the sorted set stored at the specified key which have scores in the
+ * range [start,end]. Adding a parenthesis before start or end excludes it from the range.
+ * +inf and -inf are also valid limits.
+ *
+ * zRevRangeByScore returns the same items in reverse order, when the start and end parameters are swapped.
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @param array $options Two options are available:
+ * - withscores => TRUE,
+ * - and limit => array($offset, $count)
+ *
+ * @return array Array containing the values in specified range.
+ *
+ * @link https://redis.io/commands/zrangebyscore
+ * @example
+ *
+ * $redis->zAdd('key', 0, 'val0');
+ * $redis->zAdd('key', 2, 'val2');
+ * $redis->zAdd('key', 10, 'val10');
+ * $redis->zRangeByScore('key', 0, 3); // array('val0', 'val2')
+ * $redis->zRangeByScore('key', 0, 3, array('withscores' => TRUE); // array('val0' => 0, 'val2' => 2)
+ * $redis->zRangeByScore('key', 0, 3, array('limit' => array(1, 1)); // array('val2')
+ * $redis->zRangeByScore('key', 0, 3, array('withscores' => TRUE, 'limit' => array(1, 1)); // array('val2' => 2)
+ *
+ */
+ public function zRangeByScore($key, $start, $end, array $options = array())
+ {
+ }
+
+ /**
+ * @see zRangeByScore()
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @param array $options
+ *
+ * @return array
+ */
+ public function zRevRangeByScore($key, $start, $end, array $options = array())
+ {
+ }
+
+ /**
+ * Returns a lexigraphical range of members in a sorted set, assuming the members have the same score. The
+ * min and max values are required to start with '(' (exclusive), '[' (inclusive), or be exactly the values
+ * '-' (negative inf) or '+' (positive inf). The command must be called with either three *or* five
+ * arguments or will return FALSE.
+ *
+ * @param string $key The ZSET you wish to run against.
+ * @param int $min The minimum alphanumeric value you wish to get.
+ * @param int $max The maximum alphanumeric value you wish to get.
+ * @param int $offset Optional argument if you wish to start somewhere other than the first element.
+ * @param int $limit Optional argument if you wish to limit the number of elements returned.
+ *
+ * @return array|bool Array containing the values in the specified range.
+ *
+ * @link https://redis.io/commands/zrangebylex
+ * @example
+ *
+ * foreach (array('a', 'b', 'c', 'd', 'e', 'f', 'g') as $char) {
+ * $redis->zAdd('key', $char);
+ * }
+ *
+ * $redis->zRangeByLex('key', '-', '[c'); // array('a', 'b', 'c')
+ * $redis->zRangeByLex('key', '-', '(c'); // array('a', 'b')
+ * $redis->zRangeByLex('key', '-', '[c'); // array('b', 'c')
+ *
+ */
+ public function zRangeByLex($key, $min, $max, $offset = null, $limit = null)
+ {
+ }
+
+ /**
+ * @see zRangeByLex()
+ * @param string $key
+ * @param int $min
+ * @param int $max
+ * @param int $offset
+ * @param int $limit
+ *
+ * @return array
+ *
+ * @link https://redis.io/commands/zrevrangebylex
+ */
+ public function zRevRangeByLex($key, $min, $max, $offset = null, $limit = null)
+ {
+ }
+
+ /**
+ * Returns the number of elements of the sorted set stored at the specified key which have
+ * scores in the range [start,end]. Adding a parenthesis before start or end excludes it
+ * from the range. +inf and -inf are also valid limits.
+ *
+ * @param string $key
+ * @param string $start
+ * @param string $end
+ *
+ * @return int the size of a corresponding zRangeByScore
+ *
+ * @link https://redis.io/commands/zcount
+ * @example
+ *
+ * $redis->zAdd('key', 0, 'val0');
+ * $redis->zAdd('key', 2, 'val2');
+ * $redis->zAdd('key', 10, 'val10');
+ * $redis->zCount('key', 0, 3); // 2, corresponding to array('val0', 'val2')
+ *
+ */
+ public function zCount($key, $start, $end)
+ {
+ }
+
+ /**
+ * Deletes the elements of the sorted set stored at the specified key which have scores in the range [start,end].
+ *
+ * @param string $key
+ * @param float|string $start double or "+inf" or "-inf" string
+ * @param float|string $end double or "+inf" or "-inf" string
+ *
+ * @return int The number of values deleted from the sorted set
+ *
+ * @link https://redis.io/commands/zremrangebyscore
+ * @example
+ *
+ * $redis->zAdd('key', 0, 'val0');
+ * $redis->zAdd('key', 2, 'val2');
+ * $redis->zAdd('key', 10, 'val10');
+ * $redis->zRemRangeByScore('key', 0, 3); // 2
+ *
+ */
+ public function zRemRangeByScore($key, $start, $end)
+ {
+ }
+
+ /**
+ * @see zRemRangeByScore()
+ * @deprecated use Redis::zRemRangeByScore()
+ *
+ * @param string $key
+ * @param float $start
+ * @param float $end
+ */
+ public function zDeleteRangeByScore($key, $start, $end)
+ {
+ }
+
+ /**
+ * Deletes the elements of the sorted set stored at the specified key which have rank in the range [start,end].
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ *
+ * @return int The number of values deleted from the sorted set
+ *
+ * @link https://redis.io/commands/zremrangebyrank
+ * @example
+ *
+ * $redis->zAdd('key', 1, 'one');
+ * $redis->zAdd('key', 2, 'two');
+ * $redis->zAdd('key', 3, 'three');
+ * $redis->zRemRangeByRank('key', 0, 1); // 2
+ * $redis->zRange('key', 0, -1, array('withscores' => TRUE)); // array('three' => 3)
+ *
+ */
+ public function zRemRangeByRank($key, $start, $end)
+ {
+ }
+
+ /**
+ * @see zRemRangeByRank()
+ * @link https://redis.io/commands/zremrangebyscore
+ * @deprecated use Redis::zRemRangeByRank()
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ */
+ public function zDeleteRangeByRank($key, $start, $end)
+ {
+ }
+
+ /**
+ * Returns the cardinality of an ordered set.
+ *
+ * @param string $key
+ *
+ * @return int the set's cardinality
+ *
+ * @link https://redis.io/commands/zsize
+ * @example
+ *
+ * $redis->zAdd('key', 0, 'val0');
+ * $redis->zAdd('key', 2, 'val2');
+ * $redis->zAdd('key', 10, 'val10');
+ * $redis->zCard('key'); // 3
+ *
+ */
+ public function zCard($key)
+ {
+ }
+
+ /**
+ * @see zCard()
+ * @deprecated use Redis::zCard()
+ *
+ * @param string $key
+ * @return int
+ */
+ public function zSize($key)
+ {
+ }
+
+ /**
+ * Returns the score of a given member in the specified sorted set.
+ *
+ * @param string $key
+ * @param string|mixed $member
+ *
+ * @return float|bool false if member or key not exists
+ *
+ * @link https://redis.io/commands/zscore
+ * @example
+ *
+ * $redis->zAdd('key', 2.5, 'val2');
+ * $redis->zScore('key', 'val2'); // 2.5
+ *
+ */
+ public function zScore($key, $member)
+ {
+ }
+
+ /**
+ * Returns the rank of a given member in the specified sorted set, starting at 0 for the item
+ * with the smallest score. zRevRank starts at 0 for the item with the largest score.
+ *
+ * @param string $key
+ * @param string|mixed $member
+ *
+ * @return int|bool the item's score, or false if key or member is not exists
+ *
+ * @link https://redis.io/commands/zrank
+ * @example
+ *
+ * $redis->del('z');
+ * $redis->zAdd('key', 1, 'one');
+ * $redis->zAdd('key', 2, 'two');
+ * $redis->zRank('key', 'one'); // 0
+ * $redis->zRank('key', 'two'); // 1
+ * $redis->zRevRank('key', 'one'); // 1
+ * $redis->zRevRank('key', 'two'); // 0
+ *
+ */
+ public function zRank($key, $member)
+ {
+ }
+
+ /**
+ * @see zRank()
+ * @param string $key
+ * @param string|mixed $member
+ *
+ * @return int|bool the item's score, false - if key or member is not exists
+ *
+ * @link https://redis.io/commands/zrevrank
+ */
+ public function zRevRank($key, $member)
+ {
+ }
+
+ /**
+ * Increments the score of a member from a sorted set by a given amount.
+ *
+ * @param string $key
+ * @param float $value (double) value that will be added to the member's score
+ * @param string $member
+ *
+ * @return float the new value
+ *
+ * @link https://redis.io/commands/zincrby
+ * @example
+ *
+ * $redis->del('key');
+ * $redis->zIncrBy('key', 2.5, 'member1'); // key or member1 didn't exist, so member1's score is to 0
+ * // before the increment and now has the value 2.5
+ * $redis->zIncrBy('key', 1, 'member1'); // 3.5
+ *
+ */
+ public function zIncrBy($key, $value, $member)
+ {
+ }
+
+ /**
+ * Creates an union of sorted sets given in second argument.
+ * The result of the union will be stored in the sorted set defined by the first argument.
+ * The third optionnel argument defines weights to apply to the sorted sets in input.
+ * In this case, the weights will be multiplied by the score of each element in the sorted set
+ * before applying the aggregation. The forth argument defines the AGGREGATE option which
+ * specify how the results of the union are aggregated.
+ *
+ * @param string $output
+ * @param array $zSetKeys
+ * @param array $weights
+ * @param string $aggregateFunction Either "SUM", "MIN", or "MAX": defines the behaviour to use on
+ * duplicate entries during the zUnionStore
+ *
+ * @return int The number of values in the new sorted set
+ *
+ * @link https://redis.io/commands/zunionstore
+ * @example
+ *
+ * $redis->del('k1');
+ * $redis->del('k2');
+ * $redis->del('k3');
+ * $redis->del('ko1');
+ * $redis->del('ko2');
+ * $redis->del('ko3');
+ *
+ * $redis->zAdd('k1', 0, 'val0');
+ * $redis->zAdd('k1', 1, 'val1');
+ *
+ * $redis->zAdd('k2', 2, 'val2');
+ * $redis->zAdd('k2', 3, 'val3');
+ *
+ * $redis->zUnionStore('ko1', array('k1', 'k2')); // 4, 'ko1' => array('val0', 'val1', 'val2', 'val3')
+ *
+ * // Weighted zUnionStore
+ * $redis->zUnionStore('ko2', array('k1', 'k2'), array(1, 1)); // 4, 'ko2' => array('val0', 'val1', 'val2', 'val3')
+ * $redis->zUnionStore('ko3', array('k1', 'k2'), array(5, 1)); // 4, 'ko3' => array('val0', 'val2', 'val3', 'val1')
+ *
+ */
+ public function zUnionStore($output, $zSetKeys, array $weights = null, $aggregateFunction = 'SUM')
+ {
+ }
+
+ /**
+ * @see zUnionStore
+ * @deprecated use Redis::zUnionStore()
+ *
+ * @param string $Output
+ * @param array $ZSetKeys
+ * @param array|null $Weights
+ * @param string $aggregateFunction
+ */
+ public function zUnion($Output, $ZSetKeys, array $Weights = null, $aggregateFunction = 'SUM')
+ {
+ }
+
+ /**
+ * Creates an intersection of sorted sets given in second argument.
+ * The result of the union will be stored in the sorted set defined by the first argument.
+ * The third optional argument defines weights to apply to the sorted sets in input.
+ * In this case, the weights will be multiplied by the score of each element in the sorted set
+ * before applying the aggregation. The forth argument defines the AGGREGATE option which
+ * specify how the results of the union are aggregated.
+ *
+ * @param string $output
+ * @param array $zSetKeys
+ * @param array $weights
+ * @param string $aggregateFunction Either "SUM", "MIN", or "MAX":
+ * defines the behaviour to use on duplicate entries during the zInterStore.
+ *
+ * @return int The number of values in the new sorted set.
+ *
+ * @link https://redis.io/commands/zinterstore
+ * @example
+ *
+ * $redis->del('k1');
+ * $redis->del('k2');
+ * $redis->del('k3');
+ *
+ * $redis->del('ko1');
+ * $redis->del('ko2');
+ * $redis->del('ko3');
+ * $redis->del('ko4');
+ *
+ * $redis->zAdd('k1', 0, 'val0');
+ * $redis->zAdd('k1', 1, 'val1');
+ * $redis->zAdd('k1', 3, 'val3');
+ *
+ * $redis->zAdd('k2', 2, 'val1');
+ * $redis->zAdd('k2', 3, 'val3');
+ *
+ * $redis->zInterStore('ko1', array('k1', 'k2')); // 2, 'ko1' => array('val1', 'val3')
+ * $redis->zInterStore('ko2', array('k1', 'k2'), array(1, 1)); // 2, 'ko2' => array('val1', 'val3')
+ *
+ * // Weighted zInterStore
+ * $redis->zInterStore('ko3', array('k1', 'k2'), array(1, 5), 'min'); // 2, 'ko3' => array('val1', 'val3')
+ * $redis->zInterStore('ko4', array('k1', 'k2'), array(1, 5), 'max'); // 2, 'ko4' => array('val3', 'val1')
+ *
+ */
+ public function zInterStore($output, $zSetKeys, array $weights = null, $aggregateFunction = 'SUM')
+ {
+ }
+
+ /**
+ * @see zInterStore
+ * @deprecated use Redis::zInterStore()
+ *
+ * @param $Output
+ * @param $ZSetKeys
+ * @param array|null $Weights
+ * @param string $aggregateFunction
+ */
+ public function zInter($Output, $ZSetKeys, array $Weights = null, $aggregateFunction = 'SUM')
+ {
+ }
+
+ /**
+ * Scan a sorted set for members, with optional pattern and count
+ *
+ * @param string $key String, the set to scan.
+ * @param int $iterator Long (reference), initialized to NULL.
+ * @param string $pattern String (optional), the pattern to match.
+ * @param int $count How many keys to return per iteration (Redis might return a different number).
+ *
+ * @return array|bool PHPRedis will return matching keys from Redis, or FALSE when iteration is complete
+ *
+ * @link https://redis.io/commands/zscan
+ * @example
+ *
+ * $iterator = null;
+ * while ($members = $redis-zscan('zset', $iterator)) {
+ * foreach ($members as $member => $score) {
+ * echo $member . ' => ' . $score . PHP_EOL;
+ * }
+ * }
+ *
+ */
+ public function zScan($key, &$iterator, $pattern = null, $count = 0)
+ {
+ }
+
+ /**
+ * Block until Redis can pop the highest or lowest scoring members from one or more ZSETs.
+ * There are two commands (BZPOPMIN and BZPOPMAX for popping the lowest and highest scoring elements respectively.)
+ *
+ * @param string|array $key1
+ * @param string|array $key2 ...
+ * @param int $timeout
+ *
+ * @return array Either an array with the key member and score of the highest or lowest element or an empty array
+ * if the timeout was reached without an element to pop.
+ *
+ * @since >= 5.0
+ * @link https://redis.io/commands/bzpopmax
+ * @example
+ *
+ * // Wait up to 5 seconds to pop the *lowest* scoring member from sets `zs1` and `zs2`.
+ * $redis->bzPopMin(['zs1', 'zs2'], 5);
+ * $redis->bzPopMin('zs1', 'zs2', 5);
+ *
+ * // Wait up to 5 seconds to pop the *highest* scoring member from sets `zs1` and `zs2`
+ * $redis->bzPopMax(['zs1', 'zs2'], 5);
+ * $redis->bzPopMax('zs1', 'zs2', 5);
+ *
+ */
+ public function bzPopMax($key1, $key2, $timeout)
+ {
+ }
+
+ /**
+ * @param string|array $key1
+ * @param string|array $key2 ...
+ * @param int $timeout
+ *
+ * @return array Either an array with the key member and score of the highest or lowest element or an empty array
+ * if the timeout was reached without an element to pop.
+ *
+ * @see bzPopMax
+ * @since >= 5.0
+ * @link https://redis.io/commands/bzpopmin
+ */
+ public function bzPopMin($key1, $key2, $timeout)
+ {
+ }
+
+ /**
+ * Can pop the highest scoring members from one ZSET.
+ *
+ * @param string $key
+ * @param int $count
+ *
+ * @return array Either an array with the key member and score of the highest element or an empty array
+ * if there is no element to pop.
+ *
+ * @since >= 5.0
+ * @link https://redis.io/commands/zpopmax
+ * @example
+ *
+ * // Pop the *lowest* scoring member from set `zs1`.
+ * $redis->zPopMax('zs1');
+ * // Pop the *lowest* 3 scoring member from set `zs1`.
+ * $redis->zPopMax('zs1', 3);
+ *
+ */
+ public function zPopMax($key, $count = 1)
+ {
+ }
+
+ /**
+ * Can pop the lowest scoring members from one ZSET.
+ *
+ * @param string $key
+ * @param int $count
+ *
+ * @return array Either an array with the key member and score of the lowest element or an empty array
+ * if there is no element to pop.
+ *
+ * @since >= 5.0
+ * @link https://redis.io/commands/zpopmin
+ * @example
+ *
+ * // Pop the *lowest* scoring member from set `zs1`.
+ * $redis->zPopMin('zs1');
+ * // Pop the *lowest* 3 scoring member from set `zs1`.
+ * $redis->zPopMin('zs1', 3);
+ *
+ */
+ public function zPopMin($key, $count = 1)
+ {
+ }
+
+ /**
+ * Adds a value to the hash stored at key. If this value is already in the hash, FALSE is returned.
+ *
+ * @param string $key
+ * @param string $hashKey
+ * @param string $value
+ *
+ * @return int|bool
+ * - 1 if value didn't exist and was added successfully,
+ * - 0 if the value was already present and was replaced, FALSE if there was an error.
+ *
+ * @link https://redis.io/commands/hset
+ * @example
+ *
+ * $redis->del('h')
+ * $redis->hSet('h', 'key1', 'hello'); // 1, 'key1' => 'hello' in the hash at "h"
+ * $redis->hGet('h', 'key1'); // returns "hello"
+ *
+ * $redis->hSet('h', 'key1', 'plop'); // 0, value was replaced.
+ * $redis->hGet('h', 'key1'); // returns "plop"
+ *
+ */
+ public function hSet($key, $hashKey, $value)
+ {
+ }
+
+ /**
+ * Adds a value to the hash stored at key only if this field isn't already in the hash.
+ *
+ * @param string $key
+ * @param string $hashKey
+ * @param string $value
+ *
+ * @return bool TRUE if the field was set, FALSE if it was already present.
+ *
+ * @link https://redis.io/commands/hsetnx
+ * @example
+ *
+ * $redis->del('h')
+ * $redis->hSetNx('h', 'key1', 'hello'); // TRUE, 'key1' => 'hello' in the hash at "h"
+ * $redis->hSetNx('h', 'key1', 'world'); // FALSE, 'key1' => 'hello' in the hash at "h". No change since the field
+ * wasn't replaced.
+ *
+ */
+ public function hSetNx($key, $hashKey, $value)
+ {
+ }
+
+ /**
+ * Gets a value from the hash stored at key.
+ * If the hash table doesn't exist, or the key doesn't exist, FALSE is returned.
+ *
+ * @param string $key
+ * @param string $hashKey
+ *
+ * @return string The value, if the command executed successfully BOOL FALSE in case of failure
+ *
+ * @link https://redis.io/commands/hget
+ */
+ public function hGet($key, $hashKey)
+ {
+ }
+
+ /**
+ * Returns the length of a hash, in number of items
+ *
+ * @param string $key
+ *
+ * @return int|bool the number of items in a hash, FALSE if the key doesn't exist or isn't a hash
+ *
+ * @link https://redis.io/commands/hlen
+ * @example
+ *
+ * $redis->del('h')
+ * $redis->hSet('h', 'key1', 'hello');
+ * $redis->hSet('h', 'key2', 'plop');
+ * $redis->hLen('h'); // returns 2
+ *
+ */
+ public function hLen($key)
+ {
+ }
+
+ /**
+ * Removes a values from the hash stored at key.
+ * If the hash table doesn't exist, or the key doesn't exist, FALSE is returned.
+ *
+ * @param string $key
+ * @param string $hashKey1
+ * @param string ...$otherHashKeys
+ *
+ * @return int|bool Number of deleted fields
+ *
+ * @link https://redis.io/commands/hdel
+ * @example
+ *
+ * $redis->hMSet('h',
+ * array(
+ * 'f1' => 'v1',
+ * 'f2' => 'v2',
+ * 'f3' => 'v3',
+ * 'f4' => 'v4',
+ * ));
+ *
+ * var_dump( $redis->hDel('h', 'f1') ); // int(1)
+ * var_dump( $redis->hDel('h', 'f2', 'f3') ); // int(2)
+ * s
+ * var_dump( $redis->hGetAll('h') );
+ * //// Output:
+ * // array(1) {
+ * // ["f4"]=> string(2) "v4"
+ * // }
+ *
+ */
+ public function hDel($key, $hashKey1, ...$otherHashKeys)
+ {
+ }
+
+ /**
+ * Returns the keys in a hash, as an array of strings.
+ *
+ * @param string $key
+ *
+ * @return array An array of elements, the keys of the hash. This works like PHP's array_keys().
+ *
+ * @link https://redis.io/commands/hkeys
+ * @example
+ *
+ * $redis->del('h');
+ * $redis->hSet('h', 'a', 'x');
+ * $redis->hSet('h', 'b', 'y');
+ * $redis->hSet('h', 'c', 'z');
+ * $redis->hSet('h', 'd', 't');
+ * var_dump($redis->hKeys('h'));
+ *
+ * // Output:
+ * // array(4) {
+ * // [0]=>
+ * // string(1) "a"
+ * // [1]=>
+ * // string(1) "b"
+ * // [2]=>
+ * // string(1) "c"
+ * // [3]=>
+ * // string(1) "d"
+ * // }
+ * // The order is random and corresponds to redis' own internal representation of the set structure.
+ *
+ */
+ public function hKeys($key)
+ {
+ }
+
+ /**
+ * Returns the values in a hash, as an array of strings.
+ *
+ * @param string $key
+ *
+ * @return array An array of elements, the values of the hash. This works like PHP's array_values().
+ *
+ * @link https://redis.io/commands/hvals
+ * @example
+ *
+ * $redis->del('h');
+ * $redis->hSet('h', 'a', 'x');
+ * $redis->hSet('h', 'b', 'y');
+ * $redis->hSet('h', 'c', 'z');
+ * $redis->hSet('h', 'd', 't');
+ * var_dump($redis->hVals('h'));
+ *
+ * // Output
+ * // array(4) {
+ * // [0]=>
+ * // string(1) "x"
+ * // [1]=>
+ * // string(1) "y"
+ * // [2]=>
+ * // string(1) "z"
+ * // [3]=>
+ * // string(1) "t"
+ * // }
+ * // The order is random and corresponds to redis' own internal representation of the set structure.
+ *
+ */
+ public function hVals($key)
+ {
+ }
+
+ /**
+ * Returns the whole hash, as an array of strings indexed by strings.
+ *
+ * @param string $key
+ *
+ * @return array An array of elements, the contents of the hash.
+ *
+ * @link https://redis.io/commands/hgetall
+ * @example
+ *
+ * $redis->del('h');
+ * $redis->hSet('h', 'a', 'x');
+ * $redis->hSet('h', 'b', 'y');
+ * $redis->hSet('h', 'c', 'z');
+ * $redis->hSet('h', 'd', 't');
+ * var_dump($redis->hGetAll('h'));
+ *
+ * // Output:
+ * // array(4) {
+ * // ["a"]=>
+ * // string(1) "x"
+ * // ["b"]=>
+ * // string(1) "y"
+ * // ["c"]=>
+ * // string(1) "z"
+ * // ["d"]=>
+ * // string(1) "t"
+ * // }
+ * // The order is random and corresponds to redis' own internal representation of the set structure.
+ *
+ */
+ public function hGetAll($key)
+ {
+ }
+
+ /**
+ * Verify if the specified member exists in a key.
+ *
+ * @param string $key
+ * @param string $hashKey
+ *
+ * @return bool If the member exists in the hash table, return TRUE, otherwise return FALSE.
+ *
+ * @link https://redis.io/commands/hexists
+ * @example
+ *
+ * $redis->hSet('h', 'a', 'x');
+ * $redis->hExists('h', 'a'); // TRUE
+ * $redis->hExists('h', 'NonExistingKey'); // FALSE
+ *
+ */
+ public function hExists($key, $hashKey)
+ {
+ }
+
+ /**
+ * Increments the value of a member from a hash by a given amount.
+ *
+ * @param string $key
+ * @param string $hashKey
+ * @param int $value (integer) value that will be added to the member's value
+ *
+ * @return int the new value
+ *
+ * @link https://redis.io/commands/hincrby
+ * @example
+ *
+ * $redis->del('h');
+ * $redis->hIncrBy('h', 'x', 2); // returns 2: h[x] = 2 now.
+ * $redis->hIncrBy('h', 'x', 1); // h[x] ← 2 + 1. Returns 3
+ *
+ */
+ public function hIncrBy($key, $hashKey, $value)
+ {
+ }
+
+ /**
+ * Increment the float value of a hash field by the given amount
+ *
+ * @param string $key
+ * @param string $field
+ * @param float $increment
+ *
+ * @return float
+ *
+ * @link https://redis.io/commands/hincrbyfloat
+ * @example
+ *
+ * $redis = new Redis();
+ * $redis->connect('127.0.0.1');
+ * $redis->hset('h', 'float', 3);
+ * $redis->hset('h', 'int', 3);
+ * var_dump( $redis->hIncrByFloat('h', 'float', 1.5) ); // float(4.5)
+ *
+ * var_dump( $redis->hGetAll('h') );
+ *
+ * // Output
+ * array(2) {
+ * ["float"]=>
+ * string(3) "4.5"
+ * ["int"]=>
+ * string(1) "3"
+ * }
+ *
+ */
+ public function hIncrByFloat($key, $field, $increment)
+ {
+ }
+
+ /**
+ * Fills in a whole hash. Non-string values are converted to string, using the standard (string) cast.
+ * NULL values are stored as empty strings
+ *
+ * @param string $key
+ * @param array $hashKeys key → value array
+ *
+ * @return bool
+ *
+ * @link https://redis.io/commands/hmset
+ * @example
+ *
+ * $redis->del('user:1');
+ * $redis->hMSet('user:1', array('name' => 'Joe', 'salary' => 2000));
+ * $redis->hIncrBy('user:1', 'salary', 100); // Joe earns 100 more now.
+ *
+ */
+ public function hMSet($key, $hashKeys)
+ {
+ }
+
+ /**
+ * Retirieve the values associated to the specified fields in the hash.
+ *
+ * @param string $key
+ * @param array $hashKeys
+ *
+ * @return array Array An array of elements, the values of the specified fields in the hash,
+ * with the hash keys as array keys.
+ *
+ * @link https://redis.io/commands/hmget
+ * @example
+ *
+ * $redis->del('h');
+ * $redis->hSet('h', 'field1', 'value1');
+ * $redis->hSet('h', 'field2', 'value2');
+ * $redis->hmGet('h', array('field1', 'field2')); // returns array('field1' => 'value1', 'field2' => 'value2')
+ *
+ */
+ public function hMGet($key, $hashKeys)
+ {
+ }
+
+ /**
+ * Scan a HASH value for members, with an optional pattern and count.
+ *
+ * @param string $key
+ * @param int $iterator
+ * @param string $pattern Optional pattern to match against.
+ * @param int $count How many keys to return in a go (only a sugestion to Redis).
+ *
+ * @return array An array of members that match our pattern.
+ *
+ * @link https://redis.io/commands/hscan
+ * @example
+ *
+ * // $iterator = null;
+ * // while($elements = $redis->hscan('hash', $iterator)) {
+ * // foreach($elements as $key => $value) {
+ * // echo $key . ' => ' . $value . PHP_EOL;
+ * // }
+ * // }
+ *
+ */
+ public function hScan($key, &$iterator, $pattern = null, $count = 0)
+ {
+ }
+
+ /**
+ * Get the string length of the value associated with field in the hash stored at key
+ *
+ * @param string $key
+ * @param string $field
+ *
+ * @return int the string length of the value associated with field, or zero when field is not present in the hash
+ * or key does not exist at all.
+ *
+ * @link https://redis.io/commands/hstrlen
+ * @since >= 3.2
+ */
+ public function hStrLen(string $key, string $field)
+ {
+ }
+
+ /**
+ * Add one or more geospatial items to the specified key.
+ * This function must be called with at least one longitude, latitude, member triplet.
+ *
+ * @param string $key
+ * @param float $longitude
+ * @param float $latitude
+ * @param string $member
+ *
+ * @return int The number of elements added to the geospatial key
+ *
+ * @link https://redis.io/commands/geoadd
+ * @since >=3.2
+ *
+ * @example
+ *
+ * $redis->del("myplaces");
+ *
+ * // Since the key will be new, $result will be 2
+ * $result = $redis->geoAdd(
+ * "myplaces",
+ * -122.431, 37.773, "San Francisco",
+ * -157.858, 21.315, "Honolulu"
+ * ); // 2
+ *
+ */
+ public function geoadd($key, $longitude, $latitude, $member)
+ {
+ }
+
+ /**
+ * Retrieve Geohash strings for one or more elements of a geospatial index.
+
+ * @param string $key
+ * @param string ...$member variadic list of members
+ *
+ * @return array One or more Redis Geohash encoded strings
+ *
+ * @link https://redis.io/commands/geohash
+ * @since >=3.2
+ *
+ * @example
+ *
+ * $redis->geoAdd("hawaii", -157.858, 21.306, "Honolulu", -156.331, 20.798, "Maui");
+ * $hashes = $redis->geoHash("hawaii", "Honolulu", "Maui");
+ * var_dump($hashes);
+ * // Output: array(2) {
+ * // [0]=>
+ * // string(11) "87z9pyek3y0"
+ * // [1]=>
+ * // string(11) "8e8y6d5jps0"
+ * // }
+ *
+ */
+ public function geohash($key, ...$member)
+ {
+ }
+
+ /**
+ * Return longitude, latitude positions for each requested member.
+ *
+ * @param string $key
+ * @param string $member
+ * @return array One or more longitude/latitude positions
+ *
+ * @link https://redis.io/commands/geopos
+ * @since >=3.2
+ *
+ * @example
+ *
+ * $redis->geoAdd("hawaii", -157.858, 21.306, "Honolulu", -156.331, 20.798, "Maui");
+ * $positions = $redis->geoPos("hawaii", "Honolulu", "Maui");
+ * var_dump($positions);
+ *
+ * // Output:
+ * array(2) {
+ * [0]=> array(2) {
+ * [0]=> string(22) "-157.85800248384475708"
+ * [1]=> string(19) "21.3060004581273077"
+ * }
+ * [1]=> array(2) {
+ * [0]=> string(22) "-156.33099943399429321"
+ * [1]=> string(20) "20.79799924753607598"
+ * }
+ * }
+ *
+ */
+ public function geopos(string $key, string $member)
+ {
+ }
+
+ /**
+ * Return the distance between two members in a geospatial set.
+ *
+ * If units are passed it must be one of the following values:
+ * - 'm' => Meters
+ * - 'km' => Kilometers
+ * - 'mi' => Miles
+ * - 'ft' => Feet
+ *
+ * @param string $key
+ * @param string $member1
+ * @param string $member2
+ * @param string|null $unit
+ *
+ * @return float The distance between the two passed members in the units requested (meters by default)
+ *
+ * @link https://redis.io/commands/geodist
+ * @since >=3.2
+ *
+ * @example
+ *
+ * $redis->geoAdd("hawaii", -157.858, 21.306, "Honolulu", -156.331, 20.798, "Maui");
+ *
+ * $meters = $redis->geoDist("hawaii", "Honolulu", "Maui");
+ * $kilometers = $redis->geoDist("hawaii", "Honolulu", "Maui", 'km');
+ * $miles = $redis->geoDist("hawaii", "Honolulu", "Maui", 'mi');
+ * $feet = $redis->geoDist("hawaii", "Honolulu", "Maui", 'ft');
+ *
+ * echo "Distance between Honolulu and Maui:\n";
+ * echo " meters : $meters\n";
+ * echo " kilometers: $kilometers\n";
+ * echo " miles : $miles\n";
+ * echo " feet : $feet\n";
+ *
+ * // Bad unit
+ * $inches = $redis->geoDist("hawaii", "Honolulu", "Maui", 'in');
+ * echo "Invalid unit returned:\n";
+ * var_dump($inches);
+ *
+ * // Output
+ * Distance between Honolulu and Maui:
+ * meters : 168275.204
+ * kilometers: 168.2752
+ * miles : 104.5616
+ * feet : 552084.0028
+ * Invalid unit returned:
+ * bool(false)
+ *
+ */
+ public function geodist($key, $member1, $member2, $unit = null)
+ {
+ }
+
+ /**
+ * Return members of a set with geospatial information that are within the radius specified by the caller.
+ *
+ * @param $key
+ * @param $longitude
+ * @param $latitude
+ * @param $radius
+ * @param $unit
+ * @param array|null $options
+ * + * |Key |Value |Description | + * |------------|---------------|---------------------------------------------------| + * |COUNT |integer > 0 |Limit how many results are returned | + * | |WITHCOORD |Return longitude and latitude of matching members | + * | |WITHDIST |Return the distance from the center | + * | |WITHHASH |Return the raw geohash-encoded score | + * | |ASC |Sort results in ascending order | + * | |DESC |Sort results in descending order | + * |STORE |key |Store results in key | + * |STOREDIST |key |Store the results as distances in key | + *+ * Note: It doesn't make sense to pass both ASC and DESC options but if both are passed + * the last one passed will be used. + * Note: When using STORE[DIST] in Redis Cluster, the store key must has to the same slot as + * the query key or you will get a CROSSLOT error. + * @return mixed When no STORE option is passed, this function returns an array of results. + * If it is passed this function returns the number of stored entries. + * + * @link https://redis.io/commands/georadius + * @since >= 3.2 + * @example + *
+ * // Add some cities
+ * $redis->geoAdd("hawaii", -157.858, 21.306, "Honolulu", -156.331, 20.798, "Maui");
+ *
+ * echo "Within 300 miles of Honolulu:\n";
+ * var_dump($redis->geoRadius("hawaii", -157.858, 21.306, 300, 'mi'));
+ *
+ * echo "\nWithin 300 miles of Honolulu with distances:\n";
+ * $options = ['WITHDIST'];
+ * var_dump($redis->geoRadius("hawaii", -157.858, 21.306, 300, 'mi', $options));
+ *
+ * echo "\nFirst result within 300 miles of Honolulu with distances:\n";
+ * $options['count'] = 1;
+ * var_dump($redis->geoRadius("hawaii", -157.858, 21.306, 300, 'mi', $options));
+ *
+ * echo "\nFirst result within 300 miles of Honolulu with distances in descending sort order:\n";
+ * $options[] = 'DESC';
+ * var_dump($redis->geoRadius("hawaii", -157.858, 21.306, 300, 'mi', $options));
+ *
+ * // Output
+ * Within 300 miles of Honolulu:
+ * array(2) {
+ * [0]=> string(8) "Honolulu"
+ * [1]=> string(4) "Maui"
+ * }
+ *
+ * Within 300 miles of Honolulu with distances:
+ * array(2) {
+ * [0]=>
+ * array(2) {
+ * [0]=>
+ * string(8) "Honolulu"
+ * [1]=>
+ * string(6) "0.0002"
+ * }
+ * [1]=>
+ * array(2) {
+ * [0]=>
+ * string(4) "Maui"
+ * [1]=>
+ * string(8) "104.5615"
+ * }
+ * }
+ *
+ * First result within 300 miles of Honolulu with distances:
+ * array(1) {
+ * [0]=>
+ * array(2) {
+ * [0]=>
+ * string(8) "Honolulu"
+ * [1]=>
+ * string(6) "0.0002"
+ * }
+ * }
+ *
+ * First result within 300 miles of Honolulu with distances in descending sort order:
+ * array(1) {
+ * [0]=>
+ * array(2) {
+ * [0]=>
+ * string(4) "Maui"
+ * [1]=>
+ * string(8) "104.5615"
+ * }
+ * }
+ *
+ */
+ public function georadius($key, $longitude, $latitude, $radius, $unit, array $options = null)
+ {
+ }
+
+ /**
+ * This method is identical to geoRadius except that instead of passing a longitude and latitude as the "source"
+ * you pass an existing member in the geospatial set
+ *
+ * @param string $key
+ * @param string $member
+ * @param $radius
+ * @param $units
+ * @param array|null $options see georadius
+ *
+ * @return array The zero or more entries that are close enough to the member given the distance and radius specified
+ *
+ * @link https://redis.io/commands/georadiusbymember
+ * @since >= 3.2
+ * @see georadius
+ * @example
+ *
+ * $redis->geoAdd("hawaii", -157.858, 21.306, "Honolulu", -156.331, 20.798, "Maui");
+ *
+ * echo "Within 300 miles of Honolulu:\n";
+ * var_dump($redis->geoRadiusByMember("hawaii", "Honolulu", 300, 'mi'));
+ *
+ * echo "\nFirst match within 300 miles of Honolulu:\n";
+ * var_dump($redis->geoRadiusByMember("hawaii", "Honolulu", 300, 'mi', ['count' => 1]));
+ *
+ * // Output
+ * Within 300 miles of Honolulu:
+ * array(2) {
+ * [0]=> string(8) "Honolulu"
+ * [1]=> string(4) "Maui"
+ * }
+ *
+ * First match within 300 miles of Honolulu:
+ * array(1) {
+ * [0]=> string(8) "Honolulu"
+ * }
+ *
+ */
+ public function georadiusbymember($key, $member, $radius, $units, array $options = null)
+ {
+ }
+
+ /**
+ * Get or Set the redis config keys.
+ *
+ * @param string $operation either `GET` or `SET`
+ * @param string $key for `SET`, glob-pattern for `GET`
+ * @param string|mixed $value optional string (only for `SET`)
+ *
+ * @return array Associative array for `GET`, key -> value
+ *
+ * @link https://redis.io/commands/config-get
+ * @example
+ *
+ * $redis->config("GET", "*max-*-entries*");
+ * $redis->config("SET", "dir", "/var/run/redis/dumps/");
+ *
+ */
+ public function config($operation, $key, $value)
+ {
+ }
+
+ /**
+ * Evaluate a LUA script serverside
+ *
+ * @param string $script
+ * @param array $args
+ * @param int $numKeys
+ *
+ * @return mixed What is returned depends on what the LUA script itself returns, which could be a scalar value
+ * (int/string), or an array. Arrays that are returned can also contain other arrays, if that's how it was set up in
+ * your LUA script. If there is an error executing the LUA script, the getLastError() function can tell you the
+ * message that came back from Redis (e.g. compile error).
+ *
+ * @link https://redis.io/commands/eval
+ * @example
+ *
+ * $redis->eval("return 1"); // Returns an integer: 1
+ * $redis->eval("return {1,2,3}"); // Returns Array(1,2,3)
+ * $redis->del('mylist');
+ * $redis->rpush('mylist','a');
+ * $redis->rpush('mylist','b');
+ * $redis->rpush('mylist','c');
+ * // Nested response: Array(1,2,3,Array('a','b','c'));
+ * $redis->eval("return {1,2,3,redis.call('lrange','mylist',0,-1)}}");
+ *
+ */
+ public function eval($script, $args = array(), $numKeys = 0)
+ {
+ }
+
+ /**
+ * @see eval()
+ * @deprecated use Redis::eval()
+ *
+ * @param string $script
+ * @param array $args
+ * @param int $numKeys
+ * @return mixed @see eval()
+ */
+ public function evaluate($script, $args = array(), $numKeys = 0)
+ {
+ }
+
+ /**
+ * Evaluate a LUA script serverside, from the SHA1 hash of the script instead of the script itself.
+ * In order to run this command Redis will have to have already loaded the script, either by running it or via
+ * the SCRIPT LOAD command.
+ *
+ * @param string $scriptSha
+ * @param array $args
+ * @param int $numKeys
+ *
+ * @return mixed @see eval()
+ *
+ * @see eval()
+ * @link https://redis.io/commands/evalsha
+ * @example
+ *
+ * $script = 'return 1';
+ * $sha = $redis->script('load', $script);
+ * $redis->evalSha($sha); // Returns 1
+ *
+ */
+ public function evalSha($scriptSha, $args = array(), $numKeys = 0)
+ {
+ }
+
+ /**
+ * @see evalSha()
+ * @deprecated use Redis::evalSha()
+ *
+ * @param string $scriptSha
+ * @param array $args
+ * @param int $numKeys
+ */
+ public function evaluateSha($scriptSha, $args = array(), $numKeys = 0)
+ {
+ }
+
+ /**
+ * Execute the Redis SCRIPT command to perform various operations on the scripting subsystem.
+ * @param string $command load | flush | kill | exists
+ * @param string $script
+ *
+ * @return mixed
+ *
+ * @link https://redis.io/commands/script-load
+ * @link https://redis.io/commands/script-kill
+ * @link https://redis.io/commands/script-flush
+ * @link https://redis.io/commands/script-exists
+ * @example
+ *
+ * $redis->script('load', $script);
+ * $redis->script('flush');
+ * $redis->script('kill');
+ * $redis->script('exists', $script1, [$script2, $script3, ...]);
+ *
+ *
+ * SCRIPT LOAD will return the SHA1 hash of the passed script on success, and FALSE on failure.
+ * SCRIPT FLUSH should always return TRUE
+ * SCRIPT KILL will return true if a script was able to be killed and false if not
+ * SCRIPT EXISTS will return an array with TRUE or FALSE for each passed script
+ */
+ public function script($command, $script)
+ {
+ }
+
+ /**
+ * The last error message (if any)
+ *
+ * @return string|null A string with the last returned script based error message, or NULL if there is no error
+ *
+ * @example
+ *
+ * $redis->eval('this-is-not-lua');
+ * $err = $redis->getLastError();
+ * // "ERR Error compiling script (new function): user_script:1: '=' expected near '-'"
+ *
+ */
+ public function getLastError()
+ {
+ }
+
+ /**
+ * Clear the last error message
+ *
+ * @return bool true
+ *
+ * @example
+ *
+ * $redis->set('x', 'a');
+ * $redis->incr('x');
+ * $err = $redis->getLastError();
+ * // "ERR value is not an integer or out of range"
+ * $redis->clearLastError();
+ * $err = $redis->getLastError();
+ * // NULL
+ *
+ */
+ public function clearLastError()
+ {
+ }
+
+ /**
+ * Issue the CLIENT command with various arguments.
+ * The Redis CLIENT command can be used in four ways:
+ * - CLIENT LIST
+ * - CLIENT GETNAME
+ * - CLIENT SETNAME [name]
+ * - CLIENT KILL [ip:port]
+ *
+ * @param string $command
+ * @param string $value
+ * @return mixed This will vary depending on which client command was executed:
+ * - CLIENT LIST will return an array of arrays with client information.
+ * - CLIENT GETNAME will return the client name or false if none has been set
+ * - CLIENT SETNAME will return true if it can be set and false if not
+ * - CLIENT KILL will return true if the client can be killed, and false if not
+ *
+ * Note: phpredis will attempt to reconnect so you can actually kill your own connection but may not notice losing it!
+ *
+ * @link https://redis.io/commands/client-list
+ * @link https://redis.io/commands/client-getname
+ * @link https://redis.io/commands/client-setname
+ * @link https://redis.io/commands/client-kill
+ *
+ * @example
+ *
+ * $redis->client('list'); // Get a list of clients
+ * $redis->client('getname'); // Get the name of the current connection
+ * $redis->client('setname', 'somename'); // Set the name of the current connection
+ * $redis->client('kill', ); // Kill the process at ip:port
+ *
+ */
+ public function client($command, $value = '')
+ {
+ }
+
+ /**
+ * A utility method to prefix the value with the prefix setting for phpredis.
+ *
+ * @param mixed $value The value you wish to prefix
+ *
+ * @return string If a prefix is set up, the value now prefixed.
+ * If there is no prefix, the value will be returned unchanged.
+ *
+ * @example
+ *
+ * $redis->setOption(Redis::OPT_PREFIX, 'my-prefix:');
+ * $redis->_prefix('my-value'); // Will return 'my-prefix:my-value'
+ *
+ */
+ public function _prefix($value)
+ {
+ }
+
+ /**
+ * A utility method to unserialize data with whatever serializer is set up. If there is no serializer set, the
+ * value will be returned unchanged. If there is a serializer set up, and the data passed in is malformed, an
+ * exception will be thrown. This can be useful if phpredis is serializing values, and you return something from
+ * redis in a LUA script that is serialized.
+ *
+ * @param string $value The value to be unserialized
+ *
+ * @return mixed
+ * @example
+ *
+ * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_PHP);
+ * $redis->_unserialize('a:3:{i:0;i:1;i:1;i:2;i:2;i:3;}'); // Will return Array(1,2,3)
+ *
+ */
+ public function _unserialize($value)
+ {
+ }
+
+ /**
+ * A utility method to serialize values manually. This method allows you to serialize a value with whatever
+ * serializer is configured, manually. This can be useful for serialization/unserialization of data going in
+ * and out of EVAL commands as phpredis can't automatically do this itself. Note that if no serializer is
+ * set, phpredis will change Array values to 'Array', and Objects to 'Object'.
+ *
+ * @param mixed $value The value to be serialized.
+ *
+ * @return mixed
+ * @example
+ *
+ * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_NONE);
+ * $redis->_serialize("foo"); // returns "foo"
+ * $redis->_serialize(Array()); // Returns "Array"
+ * $redis->_serialize(new stdClass()); // Returns "Object"
+ *
+ * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_PHP);
+ * $redis->_serialize("foo"); // Returns 's:3:"foo";'
+ *
+ */
+ public function _serialize($value)
+ {
+ }
+
+ /**
+ * Dump a key out of a redis database, the value of which can later be passed into redis using the RESTORE command.
+ * The data that comes out of DUMP is a binary representation of the key as Redis stores it.
+ * @param string $key
+ *
+ * @return string|bool The Redis encoded value of the key, or FALSE if the key doesn't exist
+ *
+ * @link https://redis.io/commands/dump
+ * @example
+ *
+ * $redis->set('foo', 'bar');
+ * $val = $redis->dump('foo'); // $val will be the Redis encoded key value
+ *
+ */
+ public function dump($key)
+ {
+ }
+
+ /**
+ * Restore a key from the result of a DUMP operation.
+ *
+ * @param string $key The key name
+ * @param int $ttl How long the key should live (if zero, no expire will be set on the key)
+ * @param string $value (binary). The Redis encoded key value (from DUMP)
+ *
+ * @return bool
+ *
+ * @link https://redis.io/commands/restore
+ * @example
+ *
+ * $redis->set('foo', 'bar');
+ * $val = $redis->dump('foo');
+ * $redis->restore('bar', 0, $val); // The key 'bar', will now be equal to the key 'foo'
+ *
+ */
+ public function restore($key, $ttl, $value)
+ {
+ }
+
+ /**
+ * Migrates a key to a different Redis instance.
+ *
+ * @param string $host The destination host
+ * @param int $port The TCP port to connect to.
+ * @param string $key The key to migrate.
+ * @param int $db The target DB.
+ * @param int $timeout The maximum amount of time given to this transfer.
+ * @param bool $copy Should we send the COPY flag to redis.
+ * @param bool $replace Should we send the REPLACE flag to redis.
+ *
+ * @return bool
+ *
+ * @link https://redis.io/commands/migrate
+ * @example
+ *
+ * $redis->migrate('backup', 6379, 'foo', 0, 3600);
+ *
+ */
+ public function migrate($host, $port, $key, $db, $timeout, $copy = false, $replace = false)
+ {
+ }
+
+ /**
+ * Return the current Redis server time.
+ *
+ * @return array If successful, the time will come back as an associative array with element zero being the
+ * unix timestamp, and element one being microseconds.
+ *
+ * @link https://redis.io/commands/time
+ * @example
+ *
+ * var_dump( $redis->time() );
+ * // array(2) {
+ * // [0] => string(10) "1342364352"
+ * // [1] => string(6) "253002"
+ * // }
+ *
+ */
+ public function time()
+ {
+ }
+
+ /**
+ * Scan the keyspace for keys
+ *
+ * @param int $iterator Iterator, initialized to NULL.
+ * @param string $pattern Pattern to match.
+ * @param int $count Count of keys per iteration (only a suggestion to Redis).
+ *
+ * @return array|bool This function will return an array of keys or FALSE if there are no more keys.
+ *
+ * @link https://redis.io/commands/scan
+ * @example
+ *
+ * $iterator = null;
+ * while(false !== ($keys = $redis->scan($iterator))) {
+ * foreach($keys as $key) {
+ * echo $key . PHP_EOL;
+ * }
+ * }
+ *
+ */
+ public function scan(&$iterator, $pattern = null, $count = 0)
+ {
+ }
+
+ /**
+ * Adds all the element arguments to the HyperLogLog data structure stored at the key.
+ *
+ * @param string $key
+ * @param array $elements
+ *
+ * @return bool
+ *
+ * @link https://redis.io/commands/pfadd
+ * @example $redis->pfAdd('key', array('elem1', 'elem2'))
+ */
+ public function pfAdd($key, array $elements)
+ {
+ }
+
+ /**
+ * When called with a single key, returns the approximated cardinality computed by the HyperLogLog data
+ * structure stored at the specified variable, which is 0 if the variable does not exist.
+ *
+ * @param string|array $key
+ *
+ * @return int
+ *
+ * @link https://redis.io/commands/pfcount
+ * @example
+ *
+ * $redis->pfAdd('key1', array('elem1', 'elem2'));
+ * $redis->pfAdd('key2', array('elem3', 'elem2'));
+ * $redis->pfCount('key1'); // int(2)
+ * $redis->pfCount(array('key1', 'key2')); // int(3)
+ */
+ public function pfCount($key)
+ {
+ }
+
+ /**
+ * Merge multiple HyperLogLog values into an unique value that will approximate the cardinality
+ * of the union of the observed Sets of the source HyperLogLog structures.
+ *
+ * @param string $destKey
+ * @param array $sourceKeys
+ *
+ * @return bool
+ *
+ * @link https://redis.io/commands/pfmerge
+ * @example
+ *
+ * $redis->pfAdd('key1', array('elem1', 'elem2'));
+ * $redis->pfAdd('key2', array('elem3', 'elem2'));
+ * $redis->pfMerge('key3', array('key1', 'key2'));
+ * $redis->pfCount('key3'); // int(3)
+ */
+ public function pfMerge($destKey, array $sourceKeys)
+ {
+ }
+
+ /**
+ * Send arbitrary things to the redis server.
+ *
+ * @param string $command Required command to send to the server.
+ * @param mixed $arguments Optional variable amount of arguments to send to the server.
+ *
+ * @return mixed
+ *
+ * @example
+ *
+ * $redis->rawCommand('SET', 'key', 'value'); // bool(true)
+ * $redis->rawCommand('GET", 'key'); // string(5) "value"
+ *
+ */
+ public function rawCommand($command, $arguments)
+ {
+ }
+
+ /**
+ * Detect whether we're in ATOMIC/MULTI/PIPELINE mode.
+ *
+ * @return int Either Redis::ATOMIC, Redis::MULTI or Redis::PIPELINE
+ *
+ * @example $redis->getMode();
+ */
+ public function getMode()
+ {
+ }
+
+ /**
+ * Acknowledge one or more messages on behalf of a consumer group.
+ *
+ * @param string $stream
+ * @param string $group
+ * @param array $messages
+ *
+ * @return int The number of messages Redis reports as acknowledged.
+ *
+ * @link https://redis.io/commands/xack
+ * @example
+ *
+ * $redis->xAck('stream', 'group1', ['1530063064286-0', '1530063064286-1']);
+ *
+ */
+ public function xAck($stream, $group, $messages)
+ {
+ }
+
+ /**
+ * Add a message to a stream
+ *
+ * @param string $key
+ * @param string $id
+ * @param array $messages
+ * @param int $maxLen
+ * @param bool $isApproximate
+ *
+ * @return string The added message ID.
+ *
+ * @link https://redis.io/commands/xadd
+ * @example
+ *
+ * $redis->xAdd('mystream', "*", ['field' => 'value']);
+ * $redis->xAdd('mystream', "*", ['field' => 'value'], 10);
+ * $redis->xAdd('mystream', "*", ['field' => 'value'], 10, true);
+ *
+ */
+ public function xAdd($key, $id, $messages, $maxLen = 0, $isApproximate = false)
+ {
+ }
+
+ /**
+ * Claim ownership of one or more pending messages
+ *
+ * @param string $key
+ * @param string $group
+ * @param string $consumer
+ * @param int $minIdleTime
+ * @param array $ids
+ * @param array $options ['IDLE' => $value, 'TIME' => $value, 'RETRYCOUNT' => $value, 'FORCE', 'JUSTID']
+ *
+ * @return array Either an array of message IDs along with corresponding data, or just an array of IDs
+ * (if the 'JUSTID' option was passed).
+ *
+ * @link https://redis.io/commands/xclaim
+ * @example
+ *
+ * $ids = ['1530113681011-0', '1530113681011-1', '1530113681011-2'];
+ *
+ * // Without any options
+ * $redis->xClaim('mystream', 'group1', 'myconsumer1', 0, $ids);
+ *
+ * // With options
+ * $redis->xClaim(
+ * 'mystream', 'group1', 'myconsumer2', 0, $ids,
+ * [
+ * 'IDLE' => time() * 1000,
+ * 'RETRYCOUNT' => 5,
+ * 'FORCE',
+ * 'JUSTID'
+ * ]
+ * );
+ *
+ */
+ public function xClaim($key, $group, $consumer, $minIdleTime, $ids, $options = [])
+ {
+ }
+
+ /**
+ * Delete one or more messages from a stream
+ *
+ * @param string $key
+ * @param array $ids
+ *
+ * @return int The number of messages removed
+ *
+ * @link https://redis.io/commands/xdel
+ * @example
+ *
+ * $redis->xDel('mystream', ['1530115304877-0', '1530115305731-0']);
+ *
+ */
+ public function xDel($key, $ids)
+ {
+ }
+
+ /**
+ * @param string $operation e.g.: 'HELP', 'SETID', 'DELGROUP', 'CREATE', 'DELCONSUMER'
+ * @param string $key
+ * @param string $group
+ * @param string $msgId
+ * @param bool $mkStream
+ *
+ * @return mixed This command returns different types depending on the specific XGROUP command executed.
+ *
+ * @link https://redis.io/commands/xgroup
+ * @example
+ *
+ * $redis->xGroup('CREATE', 'mystream', 'mygroup', 0);
+ * $redis->xGroup('CREATE', 'mystream', 'mygroup', 0, true); // create stream
+ * $redis->xGroup('DESTROY', 'mystream', 'mygroup');
+ *
+ */
+ public function xGroup($operation, $key, $group, $msgId = '', $mkStream = false)
+ {
+ }
+
+ /**
+ * Get information about a stream or consumer groups
+ *
+ * @param string $operation e.g.: 'CONSUMERS', 'GROUPS', 'STREAM', 'HELP'
+ * @param string $stream
+ * @param string $group
+ *
+ * @return mixed This command returns different types depending on which subcommand is used.
+ *
+ * @link https://redis.io/commands/xinfo
+ * @example
+ *
+ * $redis->xInfo('STREAM', 'mystream');
+ *
+ */
+ public function xInfo($operation, $stream, $group)
+ {
+ }
+
+ /**
+ * Get the length of a given stream.
+ *
+ * @param string $stream
+ *
+ * @return int The number of messages in the stream.
+ *
+ * @link https://redis.io/commands/xlen
+ * @example
+ *
+ * $redis->xLen('mystream');
+ *
+ */
+ public function xLen($stream)
+ {
+ }
+
+ /**
+ * Get information about pending messages in a given stream
+ *
+ * @param string $stream
+ * @param string $group
+ * @param string $start
+ * @param string $end
+ * @param int $count
+ * @param string $consumer
+ *
+ * @return array Information about the pending messages, in various forms depending on
+ * the specific invocation of XPENDING.
+ *
+ * @link https://redis.io/commands/xpending
+ * @example
+ *
+ * $redis->xPending('mystream', 'mygroup');
+ * $redis->xPending('mystream', 'mygroup', '-', '+', 1, 'consumer-1');
+ *
+ */
+ public function xPending($stream, $group, $start = null, $end = null, $count = null, $consumer = null)
+ {
+ }
+
+ /**
+ * Get a range of messages from a given stream
+ *
+ * @param string $stream
+ * @param string $start
+ * @param string $end
+ * @param int $count
+ *
+ * @return array The messages in the stream within the requested range.
+ *
+ * @link https://redis.io/commands/xrange
+ * @example
+ *
+ * // Get everything in this stream
+ * $redis->xRange('mystream', '-', '+');
+ * // Only the first two messages
+ * $redis->xRange('mystream', '-', '+', 2);
+ *
+ */
+ public function xRange($stream, $start, $end, $count = null)
+ {
+ }
+
+ /**
+ * Read data from one or more streams and only return IDs greater than sent in the command.
+ *
+ * @param array $streams
+ * @param int|string $count
+ * @param int|string $block
+ *
+ * @return array The messages in the stream newer than the IDs passed to Redis (if any)
+ *
+ * @link https://redis.io/commands/xread
+ * @example
+ *
+ * $redis->xRead(['stream1' => '1535222584555-0', 'stream2' => '1535222584555-0']);
+ *
+ */
+ public function xRead($streams, $count = null, $block = null)
+ {
+ }
+
+ /**
+ * This method is similar to xRead except that it supports reading messages for a specific consumer group.
+ *
+ * @param string $group
+ * @param string $consumer
+ * @param array $streams
+ * @param int|null $count
+ * @param int|null $block
+ *
+ * @return array The messages delivered to this consumer group (if any).
+ *
+ * @link https://redis.io/commands/xreadgroup
+ * @example
+ *
+ * // Consume messages for 'mygroup', 'consumer1'
+ * $redis->xReadGroup('mygroup', 'consumer1', ['s1' => 0, 's2' => 0]);
+ * // Read a single message as 'consumer2' for up to a second until a message arrives.
+ * $redis->xReadGroup('mygroup', 'consumer2', ['s1' => 0, 's2' => 0], 1, 1000);
+ *
+ */
+ public function xReadGroup($group, $consumer, $streams, $count = null, $block = null)
+ {
+ }
+
+ /**
+ * This is identical to xRange except the results come back in reverse order.
+ * Also note that Redis reverses the order of "start" and "end".
+ *
+ * @param string $stream
+ * @param string $end
+ * @param string $start
+ * @param int $count
+ *
+ * @return array The messages in the range specified
+ *
+ * @link https://redis.io/commands/xrevrange
+ * @example
+ *
+ * $redis->xRevRange('mystream', '+', '-');
+ *
+ */
+ public function xRevRange($stream, $end, $start, $count = null)
+ {
+ }
+
+ /**
+ * Trim the stream length to a given maximum.
+ * If the "approximate" flag is pasesed, Redis will use your size as a hint but only trim trees in whole nodes
+ * (this is more efficient)
+ *
+ * @param string $stream
+ * @param int $maxLen
+ * @param bool $isApproximate
+ *
+ * @return int The number of messages trimed from the stream.
+ *
+ * @link https://redis.io/commands/xtrim
+ * @example
+ *
+ * // Trim to exactly 100 messages
+ * $redis->xTrim('mystream', 100);
+ * // Let Redis approximate the trimming
+ * $redis->xTrim('mystream', 100, true);
+ *
+ */
+ public function xTrim($stream, $maxLen, $isApproximate)
+ {
+ }
+
+ /**
+ * Adds a values to the set value stored at key.
+ *
+ * @param string $key Required key
+ * @param array $values Required values
+ *
+ * @return int|bool The number of elements added to the set.
+ * If this value is already in the set, FALSE is returned
+ *
+ * @link https://redis.io/commands/sadd
+ * @link https://github.com/phpredis/phpredis/commit/3491b188e0022f75b938738f7542603c7aae9077
+ * @since phpredis 2.2.8
+ * @example
+ *
+ * $redis->sAddArray('k', array('v1')); // boolean
+ * $redis->sAddArray('k', array('v1', 'v2', 'v3')); // boolean
+ *
+ */
+ public function sAddArray($key, array $values)
+ {
+ }
+}
+
+class RedisException extends Exception
+{
+}
+
+/**
+ * @mixin \Redis
+ */
+class RedisArray
+{
+ /**
+ * Constructor
+ *
+ * @param string|array $hosts Name of the redis array from redis.ini or array of hosts to construct the array with
+ * @param array $opts Array of options
+ *
+ * @link https://github.com/nicolasff/phpredis/blob/master/arrays.markdown
+ */
+ public function __construct($hosts, array $opts = null)
+ {
+ }
+
+ /**
+ * @return array list of hosts for the selected array
+ */
+ public function _hosts()
+ {
+ }
+
+ /**
+ * @return string the name of the function used to extract key parts during consistent hashing
+ */
+ public function _function()
+ {
+ }
+
+ /**
+ * @param string $key The key for which you want to lookup the host
+ *
+ * @return string the host to be used for a certain key
+ */
+ public function _target($key)
+ {
+ }
+
+ /**
+ * Use this function when a new node is added and keys need to be rehashed.
+ */
+ public function _rehash()
+ {
+ }
+
+ /**
+ * Returns an associative array of strings and integers, with the following keys:
+ * - redis_version
+ * - redis_git_sha1
+ * - redis_git_dirty
+ * - redis_build_id
+ * - redis_mode
+ * - os
+ * - arch_bits
+ * - multiplexing_api
+ * - atomicvar_api
+ * - gcc_version
+ * - process_id
+ * - run_id
+ * - tcp_port
+ * - uptime_in_seconds
+ * - uptime_in_days
+ * - hz
+ * - lru_clock
+ * - executable
+ * - config_file
+ * - connected_clients
+ * - client_longest_output_list
+ * - client_biggest_input_buf
+ * - blocked_clients
+ * - used_memory
+ * - used_memory_human
+ * - used_memory_rss
+ * - used_memory_rss_human
+ * - used_memory_peak
+ * - used_memory_peak_human
+ * - used_memory_peak_perc
+ * - used_memory_peak
+ * - used_memory_overhead
+ * - used_memory_startup
+ * - used_memory_dataset
+ * - used_memory_dataset_perc
+ * - total_system_memory
+ * - total_system_memory_human
+ * - used_memory_lua
+ * - used_memory_lua_human
+ * - maxmemory
+ * - maxmemory_human
+ * - maxmemory_policy
+ * - mem_fragmentation_ratio
+ * - mem_allocator
+ * - active_defrag_running
+ * - lazyfree_pending_objects
+ * - mem_fragmentation_ratio
+ * - loading
+ * - rdb_changes_since_last_save
+ * - rdb_bgsave_in_progress
+ * - rdb_last_save_time
+ * - rdb_last_bgsave_status
+ * - rdb_last_bgsave_time_sec
+ * - rdb_current_bgsave_time_sec
+ * - rdb_last_cow_size
+ * - aof_enabled
+ * - aof_rewrite_in_progress
+ * - aof_rewrite_scheduled
+ * - aof_last_rewrite_time_sec
+ * - aof_current_rewrite_time_sec
+ * - aof_last_bgrewrite_status
+ * - aof_last_write_status
+ * - aof_last_cow_size
+ * - changes_since_last_save
+ * - aof_current_size
+ * - aof_base_size
+ * - aof_pending_rewrite
+ * - aof_buffer_length
+ * - aof_rewrite_buffer_length
+ * - aof_pending_bio_fsync
+ * - aof_delayed_fsync
+ * - loading_start_time
+ * - loading_total_bytes
+ * - loading_loaded_bytes
+ * - loading_loaded_perc
+ * - loading_eta_seconds
+ * - total_connections_received
+ * - total_commands_processed
+ * - instantaneous_ops_per_sec
+ * - total_net_input_bytes
+ * - total_net_output_bytes
+ * - instantaneous_input_kbps
+ * - instantaneous_output_kbps
+ * - rejected_connections
+ * - maxclients
+ * - sync_full
+ * - sync_partial_ok
+ * - sync_partial_err
+ * - expired_keys
+ * - evicted_keys
+ * - keyspace_hits
+ * - keyspace_misses
+ * - pubsub_channels
+ * - pubsub_patterns
+ * - latest_fork_usec
+ * - migrate_cached_sockets
+ * - slave_expires_tracked_keys
+ * - active_defrag_hits
+ * - active_defrag_misses
+ * - active_defrag_key_hits
+ * - active_defrag_key_misses
+ * - role
+ * - master_replid
+ * - master_replid2
+ * - master_repl_offset
+ * - second_repl_offset
+ * - repl_backlog_active
+ * - repl_backlog_size
+ * - repl_backlog_first_byte_offset
+ * - repl_backlog_histlen
+ * - master_host
+ * - master_port
+ * - master_link_status
+ * - master_last_io_seconds_ago
+ * - master_sync_in_progress
+ * - slave_repl_offset
+ * - slave_priority
+ * - slave_read_only
+ * - master_sync_left_bytes
+ * - master_sync_last_io_seconds_ago
+ * - master_link_down_since_seconds
+ * - connected_slaves
+ * - min-slaves-to-write
+ * - min-replicas-to-write
+ * - min_slaves_good_slaves
+ * - used_cpu_sys
+ * - used_cpu_user
+ * - used_cpu_sys_children
+ * - used_cpu_user_children
+ * - cluster_enabled
+ *
+ * @link https://redis.io/commands/info
+ * @return array
+ * @example
+ *
+ * $redis->info();
+ *
+ */
+ public function info() {
+ }
+}
diff --git a/build/stubs/redis_cluster.php b/build/stubs/redis_cluster.php
new file mode 100644
index 0000000000..5e14570f3b
--- /dev/null
+++ b/build/stubs/redis_cluster.php
@@ -0,0 +1,3563 @@
+
+ * @link https://github.com/zgb7mtr/phpredis_cluster_phpdoc
+ *
+ * @method mixed eval($script, $args = array(), $numKeys = 0)
+ *
+ */
+class RedisCluster {
+ const AFTER = 'after';
+ const BEFORE = 'before';
+
+ /**
+ * Options
+ */
+ const OPT_SERIALIZER = 1;
+ const OPT_PREFIX = 2;
+ const OPT_READ_TIMEOUT = 3;
+ const OPT_SCAN = 4;
+ const OPT_SLAVE_FAILOVER = 5;
+
+ /**
+ * Cluster options
+ */
+ const FAILOVER_NONE = 0;
+ const FAILOVER_ERROR = 1;
+ const FAILOVER_DISTRIBUTE = 2;
+ const FAILOVER_DISTRIBUTE_SLAVES = 3;
+
+ /**
+ * SCAN options
+ */
+ const SCAN_NORETRY = 0;
+ const SCAN_RETRY = 1;
+
+ /**
+ * Serializers
+ */
+ const SERIALIZER_NONE = 0;
+ const SERIALIZER_PHP = 1;
+ const SERIALIZER_IGBINARY = 2;
+ const SERIALIZER_MSGPACK = 3;
+ const SERIALIZER_JSON = 4;
+
+ /**
+ * Multi
+ */
+ const ATOMIC = 0;
+ const MULTI = 1;
+ const PIPELINE = 2;
+
+ /**
+ * Type
+ */
+ const REDIS_NOT_FOUND = 0;
+ const REDIS_STRING = 1;
+ const REDIS_SET = 2;
+ const REDIS_LIST = 3;
+ const REDIS_ZSET = 4;
+ const REDIS_HASH = 5;
+
+ /**
+ * Creates a Redis Cluster client
+ *
+ * @param string|null $name
+ * @param array $seeds
+ * @param float $timeout
+ * @param float $readTimeout
+ * @param bool $persistent
+ * @param string|null $auth
+ * @throws RedisClusterException
+ *
+ * @example
+ *
+ * // Declaring a cluster with an array of seeds
+ * $redisCluster = new RedisCluster(null,['127.0.0.1:6379']);
+ *
+ * // Loading a cluster configuration by name
+ * // In order to load a named array, one must first define the seed nodes in redis.ini.
+ * // The following lines would define the cluster 'mycluster', and be loaded automatically by phpredis.
+ *
+ * // # In redis.ini
+ * // redis.clusters.seeds = "mycluster[]=localhost:7000&test[]=localhost:7001"
+ * // redis.clusters.timeout = "mycluster=5"
+ * // redis.clusters.read_timeout = "mycluster=10"
+ *
+ * //Then, this cluster can be loaded by doing the following
+ *
+ * $redisClusterPro = new RedisCluster('mycluster');
+ * $redisClusterDev = new RedisCluster('test');
+ *
+ */
+ public function __construct($name, $seeds, $timeout = null, $readTimeout = null, $persistent = false, $auth = null) { }
+
+ /**
+ * Disconnects from the Redis instance, except when pconnect is used.
+ */
+ public function close() { }
+
+ /**
+ * Get the value related to the specified key
+ *
+ * @param string $key
+ *
+ * @return string|false If key didn't exist, FALSE is returned. Otherwise, the value related to this key is
+ * returned.
+ *
+ * @link https://redis.io/commands/get
+ * @example
+ *
+ * $redisCluster->get('key');
+ *
+ */
+ public function get($key) { }
+
+ /**
+ * Set the string value in argument as value of the key.
+ *
+ * @since If you're using Redis >= 2.6.12, you can pass extended options as explained in example
+ *
+ * @param string $key
+ * @param string $value
+ * @param int|array $timeout If you pass an integer, phpredis will redirect to SETEX, and will try to use Redis
+ * >= 2.6.12 extended options if you pass an array with valid values.
+ *
+ * @return bool TRUE if the command is successful.
+ *
+ * @link https://redis.io/commands/set
+ * @example
+ *
+ * // Simple key -> value set
+ * $redisCluster->set('key', 'value');
+ *
+ * // Will redirect, and actually make an SETEX call
+ * $redisCluster->set('key','value', 10);
+ *
+ * // Will set the key, if it doesn't exist, with a ttl of 10 seconds
+ * $redisCluster->set('key', 'value', Array('nx', 'ex'=>10));
+ *
+ * // Will set a key, if it does exist, with a ttl of 1000 milliseconds
+ * $redisCluster->set('key', 'value', Array('xx', 'px'=>1000));
+ *
+ */
+ public function set($key, $value, $timeout = null) { }
+
+ /**
+ * Returns the values of all specified keys.
+ *
+ * For every key that does not hold a string value or does not exist,
+ * the special value false is returned. Because of this, the operation never fails.
+ *
+ * @param array $array
+ *
+ * @return array
+ *
+ * @link https://redis.io/commands/mget
+ * @example
+ *
+ * $redisCluster->del('x', 'y', 'z', 'h'); // remove x y z
+ * $redisCluster->mset(array('x' => 'a', 'y' => 'b', 'z' => 'c'));
+ * $redisCluster->hset('h', 'field', 'value');
+ * var_dump($redisCluster->mget(array('x', 'y', 'z', 'h')));
+ * // Output:
+ * // array(3) {
+ * // [0]=>
+ * // string(1) "a"
+ * // [1]=>
+ * // string(1) "b"
+ * // [2]=>
+ * // string(1) "c"
+ * // [3]=>
+ * // bool(false)
+ * // }
+ *
+ */
+ public function mget(array $array) { }
+
+ /**
+ * Sets multiple key-value pairs in one atomic command.
+ * MSETNX only returns TRUE if all the keys were set (see SETNX).
+ *
+ * @param array $array Pairs: array(key => value, ...)
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/mset
+ * @example
+ *
+ * $redisCluster->mset(array('key0' => 'value0', 'key1' => 'value1'));
+ * var_dump($redisCluster->get('key0'));
+ * var_dump($redisCluster->get('key1'));
+ * // Output:
+ * // string(6) "value0"
+ * // string(6) "value1"
+ *
+ */
+ public function mset(array $array) { }
+
+ /**
+ * @see mset()
+ *
+ * @param array $array
+ *
+ * @return int 1 (if the keys were set) or 0 (no key was set)
+ * @link https://redis.io/commands/msetnx
+ */
+ public function msetnx(array $array) { }
+
+ /**
+ * Remove specified keys.
+ *
+ * @param int|string|array $key1 An array of keys, or an undefined number of parameters, each a key: key1 key2 key3
+ * ... keyN
+ * @param int|string ...$otherKeys
+ *
+ * @return int Number of keys deleted.
+ * @link https://redis.io/commands/del
+ * @example
+ *
+ * $redisCluster->set('key1', 'val1');
+ * $redisCluster->set('key2', 'val2');
+ * $redisCluster->set('key3', 'val3');
+ * $redisCluster->set('key4', 'val4');
+ * $redisCluster->del('key1', 'key2'); // return 2
+ * $redisCluster->del(array('key3', 'key4')); // return 2
+ *
+ */
+ public function del($key1, ...$otherKeys) { }
+
+ /**
+ * Set the string value in argument as value of the key, with a time to live.
+ *
+ * @param string $key
+ * @param int $ttl
+ * @param string $value
+ *
+ * @return bool TRUE if the command is successful.
+ * @link https://redis.io/commands/setex
+ * @example
+ *
+ * $redisCluster->setex('key', 3600, 'value'); // sets key → value, with 1h TTL.
+ *
+ */
+ public function setex($key, $ttl, $value) { }
+
+ /**
+ * PSETEX works exactly like SETEX with the sole difference that the expire time is specified in milliseconds
+ * instead of seconds.
+ *
+ * @param string $key
+ * @param int $ttl
+ * @param string $value
+ *
+ * @return bool TRUE if the command is successful.
+ * @link https://redis.io/commands/psetex
+ * @example
+ *
+ * $redisCluster->psetex('key', 1000, 'value'); // sets key → value, with 1s TTL.
+ *
+ */
+ public function psetex($key, $ttl, $value) { }
+
+ /**
+ * Set the string value in argument as value of the key if the key doesn't already exist in the database.
+ *
+ * @param string $key
+ * @param string $value
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/setnx
+ * @example
+ *
+ * $redisCluster->setnx('key', 'value'); // return TRUE
+ * $redisCluster->setnx('key', 'value'); // return FALSE
+ *
+ */
+ public function setnx($key, $value) { }
+
+ /**
+ * Sets a value and returns the previous entry at that key.
+ *
+ * @param string $key
+ * @param string $value
+ *
+ * @return string A string, the previous value located at this key.
+ * @link https://redis.io/commands/getset
+ * @example
+ *
+ * $redisCluster->set('x', '42');
+ * $exValue = $redisCluster->getSet('x', 'lol'); // return '42', replaces x by 'lol'
+ * $newValue = $redisCluster->get('x'); // return 'lol'
+ *
+ */
+ public function getSet($key, $value) { }
+
+ /**
+ * Verify if the specified key exists.
+ *
+ * @param string $key
+ *
+ * @return bool If the key exists, return TRUE, otherwise return FALSE.
+ * @link https://redis.io/commands/exists
+ * @example
+ *
+ * $redisCluster->set('key', 'value');
+ * $redisCluster->exists('key'); // TRUE
+ * $redisCluster->exists('NonExistingKey'); // FALSE
+ *
+ */
+ public function exists($key) { }
+
+ /**
+ * Returns the keys that match a certain pattern.
+ *
+ * @param string $pattern pattern, using '*' as a wildcard.
+ *
+ * @return array of STRING: The keys that match a certain pattern.
+ * @link https://redis.io/commands/keys
+ * @example
+ *
+ * $allKeys = $redisCluster->keys('*'); // all keys will match this.
+ * $keyWithUserPrefix = $redisCluster->keys('user*');
+ *
+ */
+ public function keys($pattern) { }
+
+ /**
+ * Returns the type of data pointed by a given key.
+ *
+ * @param string $key
+ *
+ * @return int
+ *
+ * Depending on the type of the data pointed by the key,
+ * this method will return the following value:
+ * - string: RedisCluster::REDIS_STRING
+ * - set: RedisCluster::REDIS_SET
+ * - list: RedisCluster::REDIS_LIST
+ * - zset: RedisCluster::REDIS_ZSET
+ * - hash: RedisCluster::REDIS_HASH
+ * - other: RedisCluster::REDIS_NOT_FOUND
+ * @link https://redis.io/commands/type
+ * @example $redisCluster->type('key');
+ */
+ public function type($key) { }
+
+ /**
+ * Returns and removes the first element of the list.
+ *
+ * @param string $key
+ *
+ * @return string|false if command executed successfully BOOL FALSE in case of failure (empty list)
+ * @link https://redis.io/commands/lpop
+ * @example
+ *
+ * $redisCluster->rPush('key1', 'A');
+ * $redisCluster->rPush('key1', 'B');
+ * $redisCluster->rPush('key1', 'C');
+ * var_dump( $redisCluster->lRange('key1', 0, -1) );
+ * // Output:
+ * // array(3) {
+ * // [0]=> string(1) "A"
+ * // [1]=> string(1) "B"
+ * // [2]=> string(1) "C"
+ * // }
+ * $redisCluster->lPop('key1');
+ * var_dump( $redisCluster->lRange('key1', 0, -1) );
+ * // Output:
+ * // array(2) {
+ * // [0]=> string(1) "B"
+ * // [1]=> string(1) "C"
+ * // }
+ *
+ */
+ public function lPop($key) { }
+
+ /**
+ * Returns and removes the last element of the list.
+ *
+ * @param string $key
+ *
+ * @return string|false if command executed successfully BOOL FALSE in case of failure (empty list)
+ * @link https://redis.io/commands/rpop
+ * @example
+ *
+ * $redisCluster->rPush('key1', 'A');
+ * $redisCluster->rPush('key1', 'B');
+ * $redisCluster->rPush('key1', 'C');
+ * var_dump( $redisCluster->lRange('key1', 0, -1) );
+ * // Output:
+ * // array(3) {
+ * // [0]=> string(1) "A"
+ * // [1]=> string(1) "B"
+ * // [2]=> string(1) "C"
+ * // }
+ * $redisCluster->rPop('key1');
+ * var_dump( $redisCluster->lRange('key1', 0, -1) );
+ * // Output:
+ * // array(2) {
+ * // [0]=> string(1) "A"
+ * // [1]=> string(1) "B"
+ * // }
+ *
+ */
+ public function rPop($key) { }
+
+ /**
+ * Set the list at index with the new value.
+ *
+ * @param string $key
+ * @param int $index
+ * @param string $value
+ *
+ * @return bool TRUE if the new value is setted. FALSE if the index is out of range, or data type identified by key
+ * is not a list.
+ * @link https://redis.io/commands/lset
+ * @example
+ *
+ * $redisCluster->rPush('key1', 'A');
+ * $redisCluster->rPush('key1', 'B');
+ * $redisCluster->rPush('key1', 'C'); // key1 => [ 'A', 'B', 'C' ]
+ * $redisCluster->lGet('key1', 0); // 'A'
+ * $redisCluster->lSet('key1', 0, 'X');
+ * $redisCluster->lGet('key1', 0); // 'X'
+ *
+ */
+ public function lSet($key, $index, $value) { }
+
+ /**
+ * Removes and returns a random element from the set value at Key.
+ *
+ * @param string $key
+ *
+ * @return string "popped" value
+ * bool FALSE if set identified by key is empty or doesn't exist.
+ * @link https://redis.io/commands/spop
+ * @example
+ *
+ * $redisCluster->sAdd('key1' , 'set1');
+ * $redisCluster->sAdd('key1' , 'set2');
+ * $redisCluster->sAdd('key1' , 'set3');
+ * var_dump($redisCluster->sMembers('key1'));// 'key1' => {'set3', 'set1', 'set2'}
+ * $redisCluster->sPop('key1');// 'set1'
+ * var_dump($redisCluster->sMembers('key1'));// 'key1' => {'set3', 'set2'}
+ * $redisCluster->sPop('key1');// 'set3',
+ * var_dump($redisCluster->sMembers('key1'));// 'key1' => {'set2'}
+ *
+ */
+ public function sPop($key) { }
+
+ /**
+ * Adds the string values to the head (left) of the list. Creates the list if the key didn't exist.
+ * If the key exists and is not a list, FALSE is returned.
+ *
+ * @param string $key
+ * @param string $value1 String, value to push in key
+ * @param string $value2 Optional
+ * @param string $valueN Optional
+ *
+ * @return int|false The new length of the list in case of success, FALSE in case of Failure.
+ * @link https://redis.io/commands/lpush
+ * @example
+ *
+ * $redisCluster->lPush('l', 'v1', 'v2', 'v3', 'v4') // int(4)
+ * var_dump( $redisCluster->lRange('l', 0, -1) );
+ * //// Output:
+ * // array(4) {
+ * // [0]=> string(2) "v4"
+ * // [1]=> string(2) "v3"
+ * // [2]=> string(2) "v2"
+ * // [3]=> string(2) "v1"
+ * // }
+ *
+ */
+ public function lPush($key, $value1, $value2 = null, $valueN = null) { }
+
+ /**
+ * Adds the string values to the tail (right) of the list. Creates the list if the key didn't exist.
+ * If the key exists and is not a list, FALSE is returned.
+ *
+ * @param string $key
+ * @param string $value1 String, value to push in key
+ * @param string $value2 Optional
+ * @param string $valueN Optional
+ *
+ * @return int|false The new length of the list in case of success, FALSE in case of Failure.
+ * @link https://redis.io/commands/rpush
+ * @example
+ *
+ * $redisCluster->rPush('r', 'v1', 'v2', 'v3', 'v4'); // int(4)
+ * var_dump( $redisCluster->lRange('r', 0, -1) );
+ * //// Output:
+ * // array(4) {
+ * // [0]=> string(2) "v1"
+ * // [1]=> string(2) "v2"
+ * // [2]=> string(2) "v3"
+ * // [3]=> string(2) "v4"
+ * // }
+ *
+ */
+ public function rPush($key, $value1, $value2 = null, $valueN = null) { }
+
+ /**
+ * BLPOP is a blocking list pop primitive.
+ * It is the blocking version of LPOP because it blocks the connection when
+ * there are no elements to pop from any of the given lists.
+ * An element is popped from the head of the first list that is non-empty,
+ * with the given keys being checked in the order that they are given.
+ *
+ * @param array $keys Array containing the keys of the lists
+ * Or STRING Key1 STRING Key2 STRING Key3 ... STRING Keyn
+ * @param int $timeout Timeout
+ *
+ * @return array array('listName', 'element')
+ * @link https://redis.io/commands/blpop
+ * @example
+ *
+ * // Non blocking feature
+ * $redisCluster->lPush('key1', 'A');
+ * $redisCluster->del('key2');
+ *
+ * $redisCluster->blPop('key1', 'key2', 10); // array('key1', 'A')
+ * // OR
+ * $redisCluster->blPop(array('key1', 'key2'), 10); // array('key1', 'A')
+ *
+ * $redisCluster->brPop('key1', 'key2', 10); // array('key1', 'A')
+ * // OR
+ * $redisCluster->brPop(array('key1', 'key2'), 10); // array('key1', 'A')
+ *
+ * // Blocking feature
+ *
+ * // process 1
+ * $redisCluster->del('key1');
+ * $redisCluster->blPop('key1', 10);
+ * // blocking for 10 seconds
+ *
+ * // process 2
+ * $redisCluster->lPush('key1', 'A');
+ *
+ * // process 1
+ * // array('key1', 'A') is returned
+ *
+ */
+ public function blPop(array $keys, $timeout) { }
+
+ /**
+ * BRPOP is a blocking list pop primitive.
+ * It is the blocking version of RPOP because it blocks the connection when
+ * there are no elements to pop from any of the given lists.
+ * An element is popped from the tail of the first list that is non-empty,
+ * with the given keys being checked in the order that they are given.
+ * See the BLPOP documentation(https://redis.io/commands/blpop) for the exact semantics,
+ * since BRPOP is identical to BLPOP with the only difference being that
+ * it pops elements from the tail of a list instead of popping from the head.
+ *
+ * @param array $keys Array containing the keys of the lists
+ * Or STRING Key1 STRING Key2 STRING Key3 ... STRING Keyn
+ * @param int $timeout Timeout
+ *
+ * @return array array('listName', 'element')
+ * @link https://redis.io/commands/brpop
+ * @example
+ *
+ * // Non blocking feature
+ * $redisCluster->lPush('key1', 'A');
+ * $redisCluster->del('key2');
+ *
+ * $redisCluster->blPop('key1', 'key2', 10); // array('key1', 'A')
+ * // OR
+ * $redisCluster->blPop(array('key1', 'key2'), 10); // array('key1', 'A')
+ *
+ * $redisCluster->brPop('key1', 'key2', 10); // array('key1', 'A')
+ * // OR
+ * $redisCluster->brPop(array('key1', 'key2'), 10); // array('key1', 'A')
+ *
+ * // Blocking feature
+ *
+ * // process 1
+ * $redisCluster->del('key1');
+ * $redisCluster->blPop('key1', 10);
+ * // blocking for 10 seconds
+ *
+ * // process 2
+ * $redisCluster->lPush('key1', 'A');
+ *
+ * // process 1
+ * // array('key1', 'A') is returned
+ *
+ */
+ public function brPop(array $keys, $timeout) { }
+
+ /**
+ * Adds the string value to the tail (right) of the list if the ist exists. FALSE in case of Failure.
+ *
+ * @param string $key
+ * @param string $value String, value to push in key
+ *
+ * @return int|false The new length of the list in case of success, FALSE in case of Failure.
+ * @link https://redis.io/commands/rpushx
+ * @example
+ *
+ * $redisCluster->del('key1');
+ * $redisCluster->rPushx('key1', 'A'); // returns 0
+ * $redisCluster->rPush('key1', 'A'); // returns 1
+ * $redisCluster->rPushx('key1', 'B'); // returns 2
+ * $redisCluster->rPushx('key1', 'C'); // returns 3
+ * // key1 now points to the following list: [ 'A', 'B', 'C' ]
+ *
+ */
+ public function rPushx($key, $value) { }
+
+ /**
+ * Adds the string value to the head (left) of the list if the list exists.
+ *
+ * @param string $key
+ * @param string $value String, value to push in key
+ *
+ * @return int|false The new length of the list in case of success, FALSE in case of Failure.
+ * @link https://redis.io/commands/lpushx
+ * @example
+ *
+ * $redisCluster->del('key1');
+ * $redisCluster->lPushx('key1', 'A'); // returns 0
+ * $redisCluster->lPush('key1', 'A'); // returns 1
+ * $redisCluster->lPushx('key1', 'B'); // returns 2
+ * $redisCluster->lPushx('key1', 'C'); // returns 3
+ * // key1 now points to the following list: [ 'C', 'B', 'A' ]
+ *
+ */
+ public function lPushx($key, $value) { }
+
+ /**
+ * Insert value in the list before or after the pivot value. the parameter options
+ * specify the position of the insert (before or after). If the list didn't exists,
+ * or the pivot didn't exists, the value is not inserted.
+ *
+ * @param string $key
+ * @param int $position RedisCluster::BEFORE | RedisCluster::AFTER
+ * @param string $pivot
+ * @param string $value
+ *
+ * @return int The number of the elements in the list, -1 if the pivot didn't exists.
+ * @link https://redis.io/commands/linsert
+ * @example
+ *
+ * $redisCluster->del('key1');
+ * $redisCluster->lInsert('key1', RedisCluster::AFTER, 'A', 'X'); // 0
+ *
+ * $redisCluster->lPush('key1', 'A');
+ * $redisCluster->lPush('key1', 'B');
+ * $redisCluster->lPush('key1', 'C');
+ *
+ * $redisCluster->lInsert('key1', RedisCluster::BEFORE, 'C', 'X'); // 4
+ * $redisCluster->lRange('key1', 0, -1); // array('X', 'C', 'B', 'A')
+ *
+ * $redisCluster->lInsert('key1', RedisCluster::AFTER, 'C', 'Y'); // 5
+ * $redisCluster->lRange('key1', 0, -1); // array('X', 'C', 'Y', 'B', 'A')
+ *
+ * $redisCluster->lInsert('key1', RedisCluster::AFTER, 'W', 'value'); // -1
+ *
+ */
+ public function lInsert($key, $position, $pivot, $value) { }
+
+ /**
+ * Return the specified element of the list stored at the specified key.
+ * 0 the first element, 1 the second ... -1 the last element, -2 the penultimate ...
+ * Return FALSE in case of a bad index or a key that doesn't point to a list.
+ *
+ * @param string $key
+ * @param int $index
+ *
+ * @return string|false the element at this index
+ * Bool FALSE if the key identifies a non-string data type, or no value corresponds to this index in the list Key.
+ * @link https://redis.io/commands/lindex
+ * @example
+ *
+ * $redisCluster->rPush('key1', 'A');
+ * $redisCluster->rPush('key1', 'B');
+ * $redisCluster->rPush('key1', 'C'); // key1 => [ 'A', 'B', 'C' ]
+ * $redisCluster->lGet('key1', 0); // 'A'
+ * $redisCluster->lGet('key1', -1); // 'C'
+ * $redisCluster->lGet('key1', 10); // `FALSE`
+ *
+ */
+ public function lIndex($key, $index) { }
+
+ /**
+ * Removes the first count occurrences of the value element from the list.
+ * If count is zero, all the matching elements are removed. If count is negative,
+ * elements are removed from tail to head.
+ *
+ * @param string $key
+ * @param string $value
+ * @param int $count
+ *
+ * @return int the number of elements to remove
+ * bool FALSE if the value identified by key is not a list.
+ * @link https://redis.io/commands/lrem
+ * @example
+ *
+ * $redisCluster->lPush('key1', 'A');
+ * $redisCluster->lPush('key1', 'B');
+ * $redisCluster->lPush('key1', 'C');
+ * $redisCluster->lPush('key1', 'A');
+ * $redisCluster->lPush('key1', 'A');
+ *
+ * $redisCluster->lRange('key1', 0, -1); // array('A', 'A', 'C', 'B', 'A')
+ * $redisCluster->lRem('key1', 'A', 2); // 2
+ * $redisCluster->lRange('key1', 0, -1); // array('C', 'B', 'A')
+ *
+ */
+ public function lRem($key, $value, $count) { }
+
+ /**
+ * A blocking version of rpoplpush, with an integral timeout in the third parameter.
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ * @param int $timeout
+ *
+ * @return string|false The element that was moved in case of success, FALSE in case of timeout.
+ * @link https://redis.io/commands/brpoplpush
+ */
+ public function brpoplpush($srcKey, $dstKey, $timeout) { }
+
+ /**
+ * Pops a value from the tail of a list, and pushes it to the front of another list.
+ * Also return this value.
+ *
+ * @since redis >= 1.2
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ *
+ * @return string|false The element that was moved in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/rpoplpush
+ * @example
+ *
+ * $redisCluster->del('x', 'y');
+ *
+ * $redisCluster->lPush('x', 'abc');
+ * $redisCluster->lPush('x', 'def');
+ * $redisCluster->lPush('y', '123');
+ * $redisCluster->lPush('y', '456');
+ *
+ * // move the last of x to the front of y.
+ * var_dump($redisCluster->rpoplpush('x', 'y'));
+ * var_dump($redisCluster->lRange('x', 0, -1));
+ * var_dump($redisCluster->lRange('y', 0, -1));
+ *
+ * ////Output:
+ * //
+ * //string(3) "abc"
+ * //array(1) {
+ * // [0]=>
+ * // string(3) "def"
+ * //}
+ * //array(3) {
+ * // [0]=>
+ * // string(3) "abc"
+ * // [1]=>
+ * // string(3) "456"
+ * // [2]=>
+ * // string(3) "123"
+ * //}
+ *
+ */
+ public function rpoplpush($srcKey, $dstKey) { }
+
+ /**
+ * Returns the size of a list identified by Key. If the list didn't exist or is empty,
+ * the command returns 0. If the data type identified by Key is not a list, the command return FALSE.
+ *
+ * @param string $key
+ *
+ * @return int The size of the list identified by Key exists.
+ * bool FALSE if the data type identified by Key is not list
+ * @link https://redis.io/commands/llen
+ * @example
+ *
+ * $redisCluster->rPush('key1', 'A');
+ * $redisCluster->rPush('key1', 'B');
+ * $redisCluster->rPush('key1', 'C'); // key1 => [ 'A', 'B', 'C' ]
+ * $redisCluster->lLen('key1'); // 3
+ * $redisCluster->rPop('key1');
+ * $redisCluster->lLen('key1'); // 2
+ *
+ */
+ public function lLen($key) { }
+
+ /**
+ * Returns the set cardinality (number of elements) of the set stored at key.
+ *
+ * @param string $key
+ *
+ * @return int the cardinality (number of elements) of the set, or 0 if key does not exist.
+ * @link https://redis.io/commands/scard
+ * @example
+ *
+ * $redisCluster->sAdd('key1' , 'set1');
+ * $redisCluster->sAdd('key1' , 'set2');
+ * $redisCluster->sAdd('key1' , 'set3'); // 'key1' => {'set1', 'set2', 'set3'}
+ * $redisCluster->sCard('key1'); // 3
+ * $redisCluster->sCard('keyX'); // 0
+ *
+ */
+ public function sCard($key) { }
+
+ /**
+ * Returns all the members of the set value stored at key.
+ * This has the same effect as running SINTER with one argument key.
+ *
+ * @param string $key
+ *
+ * @return array All elements of the set.
+ * @link https://redis.io/commands/smembers
+ * @example
+ *
+ * $redisCluster->del('s');
+ * $redisCluster->sAdd('s', 'a');
+ * $redisCluster->sAdd('s', 'b');
+ * $redisCluster->sAdd('s', 'a');
+ * $redisCluster->sAdd('s', 'c');
+ * var_dump($redisCluster->sMembers('s'));
+ *
+ * ////Output:
+ * //
+ * //array(3) {
+ * // [0]=>
+ * // string(1) "b"
+ * // [1]=>
+ * // string(1) "c"
+ * // [2]=>
+ * // string(1) "a"
+ * //}
+ * // The order is random and corresponds to redis' own internal representation of the set structure.
+ *
+ */
+ public function sMembers($key) { }
+
+ /**
+ * Returns if member is a member of the set stored at key.
+ *
+ * @param string $key
+ * @param string $value
+ *
+ * @return bool TRUE if value is a member of the set at key key, FALSE otherwise.
+ * @link https://redis.io/commands/sismember
+ * @example
+ *
+ * $redisCluster->sAdd('key1' , 'set1');
+ * $redisCluster->sAdd('key1' , 'set2');
+ * $redisCluster->sAdd('key1' , 'set3'); // 'key1' => {'set1', 'set2', 'set3'}
+ *
+ * $redisCluster->sIsMember('key1', 'set1'); // TRUE
+ * $redisCluster->sIsMember('key1', 'setX'); // FALSE
+ *
+ */
+ public function sIsMember($key, $value) { }
+
+ /**
+ * Adds a values to the set value stored at key.
+ * If this value is already in the set, FALSE is returned.
+ *
+ * @param string $key Required key
+ * @param string $value1 Required value
+ * @param string $value2 Optional value
+ * @param string $valueN Optional value
+ *
+ * @return int|false The number of elements added to the set
+ * @link https://redis.io/commands/sadd
+ * @example
+ *
+ * $redisCluster->sAdd('k', 'v1'); // int(1)
+ * $redisCluster->sAdd('k', 'v1', 'v2', 'v3'); // int(2)
+ *
+ */
+ public function sAdd($key, $value1, $value2 = null, $valueN = null) { }
+
+ /**
+ * Adds a values to the set value stored at key.
+ * If this value is already in the set, FALSE is returned.
+ *
+ * @param string $key Required key
+ * @param array $valueArray
+ *
+ * @return int|false The number of elements added to the set
+ * @example
+ *
+ * $redisCluster->sAddArray('k', ['v1', 'v2', 'v3']);
+ * //This is a feature in php only. Same as $redisCluster->sAdd('k', 'v1', 'v2', 'v3');
+ *
+ */
+ public function sAddArray($key, array $valueArray) { }
+
+ /**
+ * Removes the specified members from the set value stored at key.
+ *
+ * @param string $key
+ * @param string $member1
+ * @param string $member2
+ * @param string $memberN
+ *
+ * @return int The number of elements removed from the set.
+ * @link https://redis.io/commands/srem
+ * @example
+ *
+ * var_dump( $redisCluster->sAdd('k', 'v1', 'v2', 'v3') ); // int(3)
+ * var_dump( $redisCluster->sRem('k', 'v2', 'v3') ); // int(2)
+ * var_dump( $redisCluster->sMembers('k') );
+ * //// Output:
+ * // array(1) {
+ * // [0]=> string(2) "v1"
+ * // }
+ *
+ */
+ public function sRem($key, $member1, $member2 = null, $memberN = null) { }
+
+ /**
+ * Performs the union between N sets and returns it.
+ *
+ * @param string $key1 Any number of keys corresponding to sets in redis.
+ * @param string $key2 ...
+ * @param string $keyN ...
+ *
+ * @return array of strings: The union of all these sets.
+ * @link https://redis.io/commands/sunionstore
+ * @example
+ *
+ * $redisCluster->del('s0', 's1', 's2');
+ *
+ * $redisCluster->sAdd('s0', '1');
+ * $redisCluster->sAdd('s0', '2');
+ * $redisCluster->sAdd('s1', '3');
+ * $redisCluster->sAdd('s1', '1');
+ * $redisCluster->sAdd('s2', '3');
+ * $redisCluster->sAdd('s2', '4');
+ *
+ * var_dump($redisCluster->sUnion('s0', 's1', 's2'));
+ *
+ * //// Output:
+ * //
+ * //array(4) {
+ * // [0]=>
+ * // string(1) "3"
+ * // [1]=>
+ * // string(1) "4"
+ * // [2]=>
+ * // string(1) "1"
+ * // [3]=>
+ * // string(1) "2"
+ * //}
+ *
+ */
+ public function sUnion($key1, $key2, $keyN = null) { }
+
+ /**
+ * Performs the same action as sUnion, but stores the result in the first key
+ *
+ * @param string $dstKey the key to store the diff into.
+ * @param string $key1 Any number of keys corresponding to sets in redis.
+ * @param string $key2 ...
+ * @param string $keyN ...
+ *
+ * @return int Any number of keys corresponding to sets in redis.
+ * @link https://redis.io/commands/sunionstore
+ * @example
+ *
+ * $redisCluster->del('s0', 's1', 's2');
+ *
+ * $redisCluster->sAdd('s0', '1');
+ * $redisCluster->sAdd('s0', '2');
+ * $redisCluster->sAdd('s1', '3');
+ * $redisCluster->sAdd('s1', '1');
+ * $redisCluster->sAdd('s2', '3');
+ * $redisCluster->sAdd('s2', '4');
+ *
+ * var_dump($redisCluster->sUnionStore('dst', 's0', 's1', 's2'));
+ * var_dump($redisCluster->sMembers('dst'));
+ *
+ * //// Output:
+ * //
+ * //int(4)
+ * //array(4) {
+ * // [0]=>
+ * // string(1) "3"
+ * // [1]=>
+ * // string(1) "4"
+ * // [2]=>
+ * // string(1) "1"
+ * // [3]=>
+ * // string(1) "2"
+ * //}
+ *
+ */
+ public function sUnionStore($dstKey, $key1, $key2, $keyN = null) { }
+
+ /**
+ * Returns the members of a set resulting from the intersection of all the sets
+ * held at the specified keys. If just a single key is specified, then this command
+ * produces the members of this set. If one of the keys is missing, FALSE is returned.
+ *
+ * @param string $key1 keys identifying the different sets on which we will apply the intersection.
+ * @param string $key2 ...
+ * @param string $keyN ...
+ *
+ * @return array contain the result of the intersection between those keys.
+ * If the intersection between the different sets is empty, the return value will be empty array.
+ * @link https://redis.io/commands/sinterstore
+ * @example
+ *
+ * $redisCluster->sAdd('key1', 'val1');
+ * $redisCluster->sAdd('key1', 'val2');
+ * $redisCluster->sAdd('key1', 'val3');
+ * $redisCluster->sAdd('key1', 'val4');
+ *
+ * $redisCluster->sAdd('key2', 'val3');
+ * $redisCluster->sAdd('key2', 'val4');
+ *
+ * $redisCluster->sAdd('key3', 'val3');
+ * $redisCluster->sAdd('key3', 'val4');
+ *
+ * var_dump($redisCluster->sInter('key1', 'key2', 'key3'));
+ *
+ * // Output:
+ * //
+ * //array(2) {
+ * // [0]=>
+ * // string(4) "val4"
+ * // [1]=>
+ * // string(4) "val3"
+ * //}
+ *
+ */
+ public function sInter($key1, $key2, $keyN = null) { }
+
+ /**
+ * Performs a sInter command and stores the result in a new set.
+ *
+ * @param string $dstKey the key to store the diff into.
+ * @param string $key1 are intersected as in sInter.
+ * @param string $key2 ...
+ * @param string $keyN ...
+ *
+ * @return int|false The cardinality of the resulting set, or FALSE in case of a missing key.
+ * @link https://redis.io/commands/sinterstore
+ * @example
+ *
+ * $redisCluster->sAdd('key1', 'val1');
+ * $redisCluster->sAdd('key1', 'val2');
+ * $redisCluster->sAdd('key1', 'val3');
+ * $redisCluster->sAdd('key1', 'val4');
+ *
+ * $redisCluster->sAdd('key2', 'val3');
+ * $redisCluster->sAdd('key2', 'val4');
+ *
+ * $redisCluster->sAdd('key3', 'val3');
+ * $redisCluster->sAdd('key3', 'val4');
+ *
+ * var_dump($redisCluster->sInterStore('output', 'key1', 'key2', 'key3'));
+ * var_dump($redisCluster->sMembers('output'));
+ *
+ * //// Output:
+ * //
+ * //int(2)
+ * //array(2) {
+ * // [0]=>
+ * // string(4) "val4"
+ * // [1]=>
+ * // string(4) "val3"
+ * //}
+ *
+ */
+ public function sInterStore($dstKey, $key1, $key2, $keyN = null) { }
+
+ /**
+ * Performs the difference between N sets and returns it.
+ *
+ * @param string $key1 Any number of keys corresponding to sets in redis.
+ * @param string $key2 ...
+ * @param string $keyN ...
+ *
+ * @return array of strings: The difference of the first set will all the others.
+ * @link https://redis.io/commands/sdiff
+ * @example
+ *
+ * $redisCluster->del('s0', 's1', 's2');
+ *
+ * $redisCluster->sAdd('s0', '1');
+ * $redisCluster->sAdd('s0', '2');
+ * $redisCluster->sAdd('s0', '3');
+ * $redisCluster->sAdd('s0', '4');
+ *
+ * $redisCluster->sAdd('s1', '1');
+ * $redisCluster->sAdd('s2', '3');
+ *
+ * var_dump($redisCluster->sDiff('s0', 's1', 's2'));
+ *
+ * //// Output:
+ * //
+ * //array(2) {
+ * // [0]=>
+ * // string(1) "4"
+ * // [1]=>
+ * // string(1) "2"
+ * //}
+ *
+ */
+ public function sDiff($key1, $key2, $keyN = null) { }
+
+ /**
+ * Performs the same action as sDiff, but stores the result in the first key
+ *
+ * @param string $dstKey the key to store the diff into.
+ * @param string $key1 Any number of keys corresponding to sets in redis
+ * @param string $key2 ...
+ * @param string $keyN ...
+ *
+ * @return int|false The cardinality of the resulting set, or FALSE in case of a missing key.
+ * @link https://redis.io/commands/sdiffstore
+ * @example
+ *
+ * $redisCluster->del('s0', 's1', 's2');
+ *
+ * $redisCluster->sAdd('s0', '1');
+ * $redisCluster->sAdd('s0', '2');
+ * $redisCluster->sAdd('s0', '3');
+ * $redisCluster->sAdd('s0', '4');
+ *
+ * $redisCluster->sAdd('s1', '1');
+ * $redisCluster->sAdd('s2', '3');
+ *
+ * var_dump($redisCluster->sDiffStore('dst', 's0', 's1', 's2'));
+ * var_dump($redisCluster->sMembers('dst'));
+ *
+ * //// Output:
+ * //
+ * //int(2)
+ * //array(2) {
+ * // [0]=>
+ * // string(1) "4"
+ * // [1]=>
+ * // string(1) "2"
+ * //}
+ *
+ */
+ public function sDiffStore($dstKey, $key1, $key2, $keyN = null) { }
+
+ /**
+ * Returns a random element(s) from the set value at Key, without removing it.
+ *
+ * @param string $key
+ * @param int $count [optional]
+ *
+ * @return string|array value(s) from the set
+ * bool FALSE if set identified by key is empty or doesn't exist and count argument isn't passed.
+ * @link https://redis.io/commands/srandmember
+ * @example
+ *
+ * $redisCluster->sAdd('key1' , 'one');
+ * $redisCluster->sAdd('key1' , 'two');
+ * $redisCluster->sAdd('key1' , 'three'); // 'key1' => {'one', 'two', 'three'}
+ *
+ * var_dump( $redisCluster->sRandMember('key1') ); // 'key1' => {'one', 'two', 'three'}
+ *
+ * // string(5) "three"
+ *
+ * var_dump( $redisCluster->sRandMember('key1', 2) ); // 'key1' => {'one', 'two', 'three'}
+ *
+ * // array(2) {
+ * // [0]=> string(2) "one"
+ * // [1]=> string(2) "three"
+ * // }
+ *
+ */
+ public function sRandMember($key, $count = null) { }
+
+ /**
+ * Get the length of a string value.
+ *
+ * @param string $key
+ *
+ * @return int
+ * @link https://redis.io/commands/strlen
+ * @example
+ *
+ * $redisCluster->set('key', 'value');
+ * $redisCluster->strlen('key'); // 5
+ *
+ */
+ public function strlen($key) { }
+
+ /**
+ * Remove the expiration timer from a key.
+ *
+ * @param string $key
+ *
+ * @return bool TRUE if a timeout was removed, FALSE if the key didn’t exist or didn’t have an expiration timer.
+ * @link https://redis.io/commands/persist
+ * @example $redisCluster->persist('key');
+ */
+ public function persist($key) { }
+
+ /**
+ * Returns the remaining time to live of a key that has a timeout.
+ * This introspection capability allows a Redis client to check how many seconds a given key will continue to be
+ * part of the dataset. In Redis 2.6 or older the command returns -1 if the key does not exist or if the key exist
+ * but has no associated expire. Starting with Redis 2.8 the return value in case of error changed: Returns -2 if
+ * the key does not exist. Returns -1 if the key exists but has no associated expire.
+ *
+ * @param string $key
+ *
+ * @return int the time left to live in seconds.
+ * @link https://redis.io/commands/ttl
+ * @example $redisCluster->ttl('key');
+ */
+ public function ttl($key) { }
+
+ /**
+ * Returns the remaining time to live of a key that has an expire set,
+ * with the sole difference that TTL returns the amount of remaining time in seconds while PTTL returns it in
+ * milliseconds. In Redis 2.6 or older the command returns -1 if the key does not exist or if the key exist but has
+ * no associated expire. Starting with Redis 2.8 the return value in case of error changed: Returns -2 if the key
+ * does not exist. Returns -1 if the key exists but has no associated expire.
+ *
+ * @param string $key
+ *
+ * @return int the time left to live in milliseconds.
+ * @link https://redis.io/commands/pttl
+ * @example $redisCluster->pttl('key');
+ */
+ public function pttl($key) { }
+
+ /**
+ * Returns the cardinality of an ordered set.
+ *
+ * @param string $key
+ *
+ * @return int the set's cardinality
+ * @link https://redis.io/commands/zsize
+ * @example
+ *
+ * $redisCluster->zAdd('key', 0, 'val0');
+ * $redisCluster->zAdd('key', 2, 'val2');
+ * $redisCluster->zAdd('key', 10, 'val10');
+ * $redisCluster->zCard('key'); // 3
+ *
+ */
+ public function zCard($key) { }
+
+ /**
+ * Returns the number of elements of the sorted set stored at the specified key which have
+ * scores in the range [start,end]. Adding a parenthesis before start or end excludes it
+ * from the range. +inf and -inf are also valid limits.
+ *
+ * @param string $key
+ * @param string $start
+ * @param string $end
+ *
+ * @return int the size of a corresponding zRangeByScore.
+ * @link https://redis.io/commands/zcount
+ * @example
+ *
+ * $redisCluster->zAdd('key', 0, 'val0');
+ * $redisCluster->zAdd('key', 2, 'val2');
+ * $redisCluster->zAdd('key', 10, 'val10');
+ * $redisCluster->zCount('key', 0, 3); // 2, corresponding to array('val0', 'val2')
+ *
+ */
+ public function zCount($key, $start, $end) { }
+
+ /**
+ * Deletes the elements of the sorted set stored at the specified key which have scores in the range [start,end].
+ *
+ * @param string $key
+ * @param float|string $start double or "+inf" or "-inf" string
+ * @param float|string $end double or "+inf" or "-inf" string
+ *
+ * @return int The number of values deleted from the sorted set
+ * @link https://redis.io/commands/zremrangebyscore
+ * @example
+ *
+ * $redisCluster->zAdd('key', 0, 'val0');
+ * $redisCluster->zAdd('key', 2, 'val2');
+ * $redisCluster->zAdd('key', 10, 'val10');
+ * $redisCluster->zRemRangeByScore('key', 0, 3); // 2
+ *
+ */
+ public function zRemRangeByScore($key, $start, $end) { }
+
+ /**
+ * Returns the score of a given member in the specified sorted set.
+ *
+ * @param string $key
+ * @param string $member
+ *
+ * @return float
+ * @link https://redis.io/commands/zscore
+ * @example
+ *
+ * $redisCluster->zAdd('key', 2.5, 'val2');
+ * $redisCluster->zScore('key', 'val2'); // 2.5
+ *
+ */
+ public function zScore($key, $member) { }
+
+ /**
+ * Adds the specified member with a given score to the sorted set stored at key.
+ *
+ * @param string $key Required key
+ * @param float $score1 Required score
+ * @param string $value1 Required value
+ * @param float $score2 Optional score
+ * @param string $value2 Optional value
+ * @param float $scoreN Optional score
+ * @param string $valueN Optional value
+ *
+ * @return int Number of values added
+ * @link https://redis.io/commands/zadd
+ * @example
+ *
+ * $redisCluster->zAdd('z', 1, 'v2', 2, 'v2', 3, 'v3', 4, 'v4' ); // int(3)
+ * $redisCluster->zRem('z', 'v2', 'v3'); // int(2)
+ * var_dump( $redisCluster->zRange('z', 0, -1) );
+ *
+ * //// Output:
+ * // array(1) {
+ * // [0]=> string(2) "v4"
+ * // }
+ *
+ */
+ public function zAdd($key, $score1, $value1, $score2 = null, $value2 = null, $scoreN = null, $valueN = null) { }
+
+ /**
+ * Increments the score of a member from a sorted set by a given amount.
+ *
+ * @param string $key
+ * @param float $value (double) value that will be added to the member's score
+ * @param string $member
+ *
+ * @return float the new value
+ * @link https://redis.io/commands/zincrby
+ * @example
+ *
+ * $redisCluster->del('key');
+ * $redisCluster->zIncrBy('key', 2.5, 'member1');// key or member1 didn't exist, so member1's score is to 0 ;
+ * //before the increment and now has the value 2.5
+ * $redisCluster->zIncrBy('key', 1, 'member1'); // 3.5
+ *
+ */
+ public function zIncrBy($key, $value, $member) { }
+
+ /**
+ * Returns the length of a hash, in number of items
+ *
+ * @param string $key
+ *
+ * @return int|false the number of items in a hash, FALSE if the key doesn't exist or isn't a hash.
+ * @link https://redis.io/commands/hlen
+ * @example
+ *
+ * $redisCluster->del('h');
+ * $redisCluster->hSet('h', 'key1', 'hello');
+ * $redisCluster->hSet('h', 'key2', 'plop');
+ * $redisCluster->hLen('h'); // returns 2
+ *
+ */
+ public function hLen($key) { }
+
+ /**
+ * Returns the keys in a hash, as an array of strings.
+ *
+ * @param string $key
+ *
+ * @return array An array of elements, the keys of the hash. This works like PHP's array_keys().
+ * @link https://redis.io/commands/hkeys
+ * @example
+ *
+ * $redisCluster->del('h');
+ * $redisCluster->hSet('h', 'a', 'x');
+ * $redisCluster->hSet('h', 'b', 'y');
+ * $redisCluster->hSet('h', 'c', 'z');
+ * $redisCluster->hSet('h', 'd', 't');
+ * var_dump($redisCluster->hKeys('h'));
+ *
+ * //// Output:
+ * //
+ * // array(4) {
+ * // [0]=>
+ * // string(1) "a"
+ * // [1]=>
+ * // string(1) "b"
+ * // [2]=>
+ * // string(1) "c"
+ * // [3]=>
+ * // string(1) "d"
+ * // }
+ * // The order is random and corresponds to redis' own internal representation of the set structure.
+ *
+ */
+ public function hKeys($key) { }
+
+ /**
+ * Returns the values in a hash, as an array of strings.
+ *
+ * @param string $key
+ *
+ * @return array An array of elements, the values of the hash. This works like PHP's array_values().
+ * @link https://redis.io/commands/hvals
+ * @example
+ *
+ * $redisCluster->del('h');
+ * $redisCluster->hSet('h', 'a', 'x');
+ * $redisCluster->hSet('h', 'b', 'y');
+ * $redisCluster->hSet('h', 'c', 'z');
+ * $redisCluster->hSet('h', 'd', 't');
+ * var_dump($redisCluster->hVals('h'));
+ *
+ * //// Output:
+ * //
+ * // array(4) {
+ * // [0]=>
+ * // string(1) "x"
+ * // [1]=>
+ * // string(1) "y"
+ * // [2]=>
+ * // string(1) "z"
+ * // [3]=>
+ * // string(1) "t"
+ * // }
+ * // The order is random and corresponds to redis' own internal representation of the set structure.
+ *
+ */
+ public function hVals($key) { }
+
+ /**
+ * Gets a value from the hash stored at key.
+ * If the hash table doesn't exist, or the key doesn't exist, FALSE is returned.
+ *
+ * @param string $key
+ * @param string $hashKey
+ *
+ * @return string|false The value, if the command executed successfully BOOL FALSE in case of failure
+ * @link https://redis.io/commands/hget
+ * @example
+ *
+ * $redisCluster->del('h');
+ * $redisCluster->hSet('h', 'a', 'x');
+ * $redisCluster->hGet('h', 'a'); // 'X'
+ *
+ */
+ public function hGet($key, $hashKey) { }
+
+ /**
+ * Returns the whole hash, as an array of strings indexed by strings.
+ *
+ * @param string $key
+ *
+ * @return array An array of elements, the contents of the hash.
+ * @link https://redis.io/commands/hgetall
+ * @example
+ *
+ * $redisCluster->del('h');
+ * $redisCluster->hSet('h', 'a', 'x');
+ * $redisCluster->hSet('h', 'b', 'y');
+ * $redisCluster->hSet('h', 'c', 'z');
+ * $redisCluster->hSet('h', 'd', 't');
+ * var_dump($redisCluster->hGetAll('h'));
+ *
+ * //// Output:
+ * //
+ * // array(4) {
+ * // ["a"]=>
+ * // string(1) "x"
+ * // ["b"]=>
+ * // string(1) "y"
+ * // ["c"]=>
+ * // string(1) "z"
+ * // ["d"]=>
+ * // string(1) "t"
+ * // }
+ * // The order is random and corresponds to redis' own internal representation of the set structure.
+ *
+ */
+ public function hGetAll($key) { }
+
+ /**
+ * Verify if the specified member exists in a key.
+ *
+ * @param string $key
+ * @param string $hashKey
+ *
+ * @return bool If the member exists in the hash table, return TRUE, otherwise return FALSE.
+ * @link https://redis.io/commands/hexists
+ * @example
+ *
+ * $redisCluster->hSet('h', 'a', 'x');
+ * $redisCluster->hExists('h', 'a'); // TRUE
+ * $redisCluster->hExists('h', 'NonExistingKey'); // FALSE
+ *
+ */
+ public function hExists($key, $hashKey) { }
+
+ /**
+ * Increments the value of a member from a hash by a given amount.
+ *
+ * @param string $key
+ * @param string $hashKey
+ * @param int $value (integer) value that will be added to the member's value
+ *
+ * @return int the new value
+ * @link https://redis.io/commands/hincrby
+ * @example
+ *
+ * $redisCluster->del('h');
+ * $redisCluster->hIncrBy('h', 'x', 2); // returns 2: h[x] = 2 now.
+ * $redisCluster->hIncrBy('h', 'x', 1); // h[x] ← 2 + 1. Returns 3
+ *
+ */
+ public function hIncrBy($key, $hashKey, $value) { }
+
+ /**
+ * Adds a value to the hash stored at key. If this value is already in the hash, FALSE is returned.
+ *
+ * @param string $key
+ * @param string $hashKey
+ * @param string $value
+ *
+ * @return int
+ * 1 if value didn't exist and was added successfully,
+ * 0 if the value was already present and was replaced, FALSE if there was an error.
+ * @link https://redis.io/commands/hset
+ * @example
+ *
+ * $redisCluster->del('h')
+ * $redisCluster->hSet('h', 'key1', 'hello'); // 1, 'key1' => 'hello' in the hash at "h"
+ * $redisCluster->hGet('h', 'key1'); // returns "hello"
+ *
+ * $redisCluster->hSet('h', 'key1', 'plop'); // 0, value was replaced.
+ * $redisCluster->hGet('h', 'key1'); // returns "plop"
+ *
+ */
+ public function hSet($key, $hashKey, $value) { }
+
+ /**
+ * Adds a value to the hash stored at key only if this field isn't already in the hash.
+ *
+ * @param string $key
+ * @param string $hashKey
+ * @param string $value
+ *
+ * @return bool TRUE if the field was set, FALSE if it was already present.
+ * @link https://redis.io/commands/hsetnx
+ * @example
+ *
+ * $redisCluster->del('h')
+ * $redisCluster->hSetNx('h', 'key1', 'hello'); // TRUE, 'key1' => 'hello' in the hash at "h"
+ * $redisCluster->hSetNx('h', 'key1', 'world'); // FALSE, 'key1' => 'hello' in the hash at "h". No change since the
+ * field wasn't replaced.
+ *
+ */
+ public function hSetNx($key, $hashKey, $value) { }
+
+ /**
+ * Retirieve the values associated to the specified fields in the hash.
+ *
+ * @param string $key
+ * @param array $hashKeys
+ *
+ * @return array Array An array of elements, the values of the specified fields in the hash,
+ * with the hash keys as array keys.
+ * @link https://redis.io/commands/hmget
+ * @example
+ *
+ * $redisCluster->del('h');
+ * $redisCluster->hSet('h', 'field1', 'value1');
+ * $redisCluster->hSet('h', 'field2', 'value2');
+ * $redisCluster->hMGet('h', array('field1', 'field2')); // returns array('field1' => 'value1', 'field2' =>
+ * 'value2')
+ *
+ */
+ public function hMGet($key, $hashKeys) { }
+
+ /**
+ * Fills in a whole hash. Non-string values are converted to string, using the standard (string) cast.
+ * NULL values are stored as empty strings
+ *
+ * @param string $key
+ * @param array $hashKeys key → value array
+ *
+ * @return bool
+ * @link https://redis.io/commands/hmset
+ * @example
+ *
+ * $redisCluster->del('user:1');
+ * $redisCluster->hMSet('user:1', array('name' => 'Joe', 'salary' => 2000));
+ * $redisCluster->hIncrBy('user:1', 'salary', 100); // Joe earns 100 more now.
+ *
+ */
+ public function hMSet($key, $hashKeys) { }
+
+ /**
+ * Removes a values from the hash stored at key.
+ * If the hash table doesn't exist, or the key doesn't exist, FALSE is returned.
+ *
+ * @param string $key
+ * @param string $hashKey1
+ * @param string $hashKey2
+ * @param string $hashKeyN
+ *
+ * @return int Number of deleted fields
+ * @link https://redis.io/commands/hdel
+ * @example
+ *
+ * $redisCluster->hMSet('h',
+ * array(
+ * 'f1' => 'v1',
+ * 'f2' => 'v2',
+ * 'f3' => 'v3',
+ * 'f4' => 'v4',
+ * ));
+ *
+ * var_dump( $redisCluster->hDel('h', 'f1') ); // int(1)
+ * var_dump( $redisCluster->hDel('h', 'f2', 'f3') ); // int(2)
+ *
+ * var_dump( $redisCluster->hGetAll('h') );
+ *
+ * //// Output:
+ * //
+ * // array(1) {
+ * // ["f4"]=> string(2) "v4"
+ * // }
+ *
+ */
+ public function hDel($key, $hashKey1, $hashKey2 = null, $hashKeyN = null) { }
+
+ /**
+ * Increment the float value of a hash field by the given amount
+ *
+ * @param string $key
+ * @param string $field
+ * @param float $increment
+ *
+ * @return float
+ * @link https://redis.io/commands/hincrbyfloat
+ * @example
+ *
+ * $redisCluster->hset('h', 'float', 3);
+ * $redisCluster->hset('h', 'int', 3);
+ * var_dump( $redisCluster->hIncrByFloat('h', 'float', 1.5) ); // float(4.5)
+ *
+ * var_dump( $redisCluster->hGetAll('h') );
+ *
+ * //// Output:
+ * //
+ * // array(2) {
+ * // ["float"]=>
+ * // string(3) "4.5"
+ * // ["int"]=>
+ * // string(1) "3"
+ * // }
+ *
+ */
+ public function hIncrByFloat($key, $field, $increment) { }
+
+ /**
+ * Dump a key out of a redis database, the value of which can later be passed into redis using the RESTORE command.
+ * The data that comes out of DUMP is a binary representation of the key as Redis stores it.
+ *
+ * @param string $key
+ *
+ * @return string|false The Redis encoded value of the key, or FALSE if the key doesn't exist
+ * @link https://redis.io/commands/dump
+ * @example
+ *
+ * $redisCluster->set('foo', 'bar');
+ * $val = $redisCluster->dump('foo'); // $val will be the Redis encoded key value
+ *
+ */
+ public function dump($key) { }
+
+ /**
+ * Returns the rank of a given member in the specified sorted set, starting at 0 for the item
+ * with the smallest score. zRevRank starts at 0 for the item with the largest score.
+ *
+ * @param string $key
+ * @param string $member
+ *
+ * @return int the item's score.
+ * @link https://redis.io/commands/zrank
+ * @example
+ *
+ * $redisCluster->del('z');
+ * $redisCluster->zAdd('key', 1, 'one');
+ * $redisCluster->zAdd('key', 2, 'two');
+ * $redisCluster->zRank('key', 'one'); // 0
+ * $redisCluster->zRank('key', 'two'); // 1
+ * $redisCluster->zRevRank('key', 'one'); // 1
+ * $redisCluster->zRevRank('key', 'two'); // 0
+ *
+ */
+ public function zRank($key, $member) { }
+
+ /**
+ * @see zRank()
+ *
+ * @param string $key
+ * @param string $member
+ *
+ * @return int the item's score
+ * @link https://redis.io/commands/zrevrank
+ */
+ public function zRevRank($key, $member) { }
+
+ /**
+ * Increment the number stored at key by one.
+ *
+ * @param string $key
+ *
+ * @return int the new value
+ * @link https://redis.io/commands/incr
+ * @example
+ *
+ * $redisCluster->incr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value 1
+ * $redisCluster->incr('key1'); // 2
+ * $redisCluster->incr('key1'); // 3
+ * $redisCluster->incr('key1'); // 4
+ *
+ */
+ public function incr($key) { }
+
+ /**
+ * Decrement the number stored at key by one.
+ *
+ * @param string $key
+ *
+ * @return int the new value
+ * @link https://redis.io/commands/decr
+ * @example
+ *
+ * $redisCluster->decr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value -1
+ * $redisCluster->decr('key1'); // -2
+ * $redisCluster->decr('key1'); // -3
+ *
+ */
+ public function decr($key) { }
+
+ /**
+ * Increment the number stored at key by one. If the second argument is filled, it will be used as the integer
+ * value of the increment.
+ *
+ * @param string $key key
+ * @param int $value value that will be added to key (only for incrBy)
+ *
+ * @return int the new value
+ * @link https://redis.io/commands/incrby
+ * @example
+ *
+ * $redisCluster->incr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value 1
+ * $redisCluster->incr('key1'); // 2
+ * $redisCluster->incr('key1'); // 3
+ * $redisCluster->incr('key1'); // 4
+ * $redisCluster->incrBy('key1', 10); // 14
+ *
+ */
+ public function incrBy($key, $value) { }
+
+ /**
+ * Decrement the number stored at key by one. If the second argument is filled, it will be used as the integer
+ * value of the decrement.
+ *
+ * @param string $key
+ * @param int $value that will be subtracted to key (only for decrBy)
+ *
+ * @return int the new value
+ * @link https://redis.io/commands/decrby
+ * @example
+ *
+ * $redisCluster->decr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value -1
+ * $redisCluster->decr('key1'); // -2
+ * $redisCluster->decr('key1'); // -3
+ * $redisCluster->decrBy('key1', 10); // -13
+ *
+ */
+ public function decrBy($key, $value) { }
+
+ /**
+ * Increment the float value of a key by the given amount
+ *
+ * @param string $key
+ * @param float $increment
+ *
+ * @return float
+ * @link https://redis.io/commands/incrbyfloat
+ * @example
+ *
+ * $redisCluster->set('x', 3);
+ * var_dump( $redisCluster->incrByFloat('x', 1.5) ); // float(4.5)
+ *
+ * var_dump( $redisCluster->get('x') ); // string(3) "4.5"
+ *
+ */
+ public function incrByFloat($key, $increment) { }
+
+ /**
+ * Sets an expiration date (a timeout) on an item.
+ *
+ * @param string $key The key that will disappear.
+ * @param int $ttl The key's remaining Time To Live, in seconds.
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/expire
+ * @example
+ *
+ * $redisCluster->set('x', '42');
+ * $redisCluster->expire('x', 3); // x will disappear in 3 seconds.
+ * sleep(5); // wait 5 seconds
+ * $redisCluster->get('x'); // will return `FALSE`, as 'x' has expired.
+ *
+ */
+ public function expire($key, $ttl) { }
+
+ /**
+ * Sets an expiration date (a timeout in milliseconds) on an item.
+ *
+ * @param string $key The key that will disappear.
+ * @param int $ttl The key's remaining Time To Live, in milliseconds.
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/pexpire
+ * @example
+ *
+ * $redisCluster->set('x', '42');
+ * $redisCluster->pExpire('x', 11500); // x will disappear in 11500 milliseconds.
+ * $redisCluster->ttl('x'); // 12
+ * $redisCluster->pttl('x'); // 11500
+ *
+ */
+ public function pExpire($key, $ttl) { }
+
+ /**
+ * Sets an expiration date (a timestamp) on an item.
+ *
+ * @param string $key The key that will disappear.
+ * @param int $timestamp Unix timestamp. The key's date of death, in seconds from Epoch time.
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/expireat
+ * @example
+ *
+ * $redisCluster->set('x', '42');
+ * $now = time(); // current timestamp
+ * $redisCluster->expireAt('x', $now + 3); // x will disappear in 3 seconds.
+ * sleep(5); // wait 5 seconds
+ * $redisCluster->get('x'); // will return `FALSE`, as 'x' has expired.
+ *
+ */
+ public function expireAt($key, $timestamp) { }
+
+ /**
+ * Sets an expiration date (a timestamp) on an item. Requires a timestamp in milliseconds
+ *
+ * @param string $key The key that will disappear.
+ * @param int $timestamp Unix timestamp. The key's date of death, in seconds from Epoch time.
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/pexpireat
+ * @example
+ *
+ * $redisCluster->set('x', '42');
+ * $redisCluster->pExpireAt('x', 1555555555005);
+ * $redisCluster->ttl('x'); // 218270121
+ * $redisCluster->pttl('x'); // 218270120575
+ *
+ */
+ public function pExpireAt($key, $timestamp) { }
+
+ /**
+ * Append specified string to the string stored in specified key.
+ *
+ * @param string $key
+ * @param string $value
+ *
+ * @return int Size of the value after the append
+ * @link https://redis.io/commands/append
+ * @example
+ *
+ * $redisCluster->set('key', 'value1');
+ * $redisCluster->append('key', 'value2'); // 12
+ * $redisCluster->get('key'); // 'value1value2'
+ *
+ */
+ public function append($key, $value) { }
+
+ /**
+ * Return a single bit out of a larger string
+ *
+ * @param string $key
+ * @param int $offset
+ *
+ * @return int the bit value (0 or 1)
+ * @link https://redis.io/commands/getbit
+ * @example
+ *
+ * $redisCluster->set('key', "\x7f"); // this is 0111 1111
+ * $redisCluster->getBit('key', 0); // 0
+ * $redisCluster->getBit('key', 1); // 1
+ *
+ */
+ public function getBit($key, $offset) { }
+
+ /**
+ * Changes a single bit of a string.
+ *
+ * @param string $key
+ * @param int $offset
+ * @param bool|int $value bool or int (1 or 0)
+ *
+ * @return int 0 or 1, the value of the bit before it was set.
+ * @link https://redis.io/commands/setbit
+ * @example
+ *
+ * $redisCluster->set('key', "*"); // ord("*") = 42 = 0x2f = "0010 1010"
+ * $redisCluster->setBit('key', 5, 1); // returns 0
+ * $redisCluster->setBit('key', 7, 1); // returns 0
+ * $redisCluster->get('key'); // chr(0x2f) = "/" = b("0010 1111")
+ *
+ */
+ public function setBit($key, $offset, $value) { }
+
+ /**
+ * Bitwise operation on multiple keys.
+ *
+ * @param string $operation either "AND", "OR", "NOT", "XOR"
+ * @param string $retKey return key
+ * @param string $key1
+ * @param string $key2
+ * @param string $key3
+ *
+ * @return int The size of the string stored in the destination key.
+ * @link https://redis.io/commands/bitop
+ * @example
+ *
+ * $redisCluster->set('bit1', '1'); // 11 0001
+ * $redisCluster->set('bit2', '2'); // 11 0010
+ *
+ * $redisCluster->bitOp('AND', 'bit', 'bit1', 'bit2'); // bit = 110000
+ * $redisCluster->bitOp('OR', 'bit', 'bit1', 'bit2'); // bit = 110011
+ * $redisCluster->bitOp('NOT', 'bit', 'bit1', 'bit2'); // bit = 110011
+ * $redisCluster->bitOp('XOR', 'bit', 'bit1', 'bit2'); // bit = 11
+ *
+ */
+ public function bitOp($operation, $retKey, $key1, $key2, $key3 = null) { }
+
+ /**
+ * Return the position of the first bit set to 1 or 0 in a string. The position is returned, thinking of the
+ * string as an array of bits from left to right, where the first byte's most significant bit is at position 0,
+ * the second byte's most significant bit is at position 8, and so forth.
+ *
+ * @param string $key
+ * @param int $bit
+ * @param int $start
+ * @param int $end
+ *
+ * @return int The command returns the position of the first bit set to 1 or 0 according to the request.
+ * If we look for set bits (the bit argument is 1) and the string is empty or composed of just
+ * zero bytes, -1 is returned. If we look for clear bits (the bit argument is 0) and the string
+ * only contains bit set to 1, the function returns the first bit not part of the string on the
+ * right. So if the string is three bytes set to the value 0xff the command BITPOS key 0 will
+ * return 24, since up to bit 23 all the bits are 1. Basically, the function considers the right
+ * of the string as padded with zeros if you look for clear bits and specify no range or the
+ * start argument only. However, this behavior changes if you are looking for clear bits and
+ * specify a range with both start and end. If no clear bit is found in the specified range, the
+ * function returns -1 as the user specified a clear range and there are no 0 bits in that range.
+ * @link https://redis.io/commands/bitpos
+ * @example
+ *
+ * $redisCluster->set('key', '\xff\xff');
+ * $redisCluster->bitpos('key', 1); // int(0)
+ * $redisCluster->bitpos('key', 1, 1); // int(8)
+ * $redisCluster->bitpos('key', 1, 3); // int(-1)
+ * $redisCluster->bitpos('key', 0); // int(16)
+ * $redisCluster->bitpos('key', 0, 1); // int(16)
+ * $redisCluster->bitpos('key', 0, 1, 5); // int(-1)
+ *
+ */
+ public function bitpos($key, $bit, $start = 0, $end = null) { }
+
+ /**
+ * Count bits in a string.
+ *
+ * @param string $key
+ *
+ * @return int The number of bits set to 1 in the value behind the input key.
+ * @link https://redis.io/commands/bitcount
+ * @example
+ *
+ * $redisCluster->set('bit', '345'); // // 11 0011 0011 0100 0011 0101
+ * var_dump( $redisCluster->bitCount('bit', 0, 0) ); // int(4)
+ * var_dump( $redisCluster->bitCount('bit', 1, 1) ); // int(3)
+ * var_dump( $redisCluster->bitCount('bit', 2, 2) ); // int(4)
+ * var_dump( $redisCluster->bitCount('bit', 0, 2) ); // int(11)
+ *
+ */
+ public function bitCount($key) { }
+
+ /**
+ * @see lIndex()
+ *
+ * @param string $key
+ * @param int $index
+ *
+ * @link https://redis.io/commands/lindex
+ */
+ public function lGet($key, $index) { }
+
+ /**
+ * Return a substring of a larger string
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ *
+ * @return string the substring
+ * @link https://redis.io/commands/getrange
+ * @example
+ *
+ * $redisCluster->set('key', 'string value');
+ * $redisCluster->getRange('key', 0, 5); // 'string'
+ * $redisCluster->getRange('key', -5, -1); // 'value'
+ *
+ */
+ public function getRange($key, $start, $end) { }
+
+ /**
+ * Trims an existing list so that it will contain only a specified range of elements.
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $stop
+ *
+ * @return array|false Bool return FALSE if the key identify a non-list value.
+ * @link https://redis.io/commands/ltrim
+ * @example
+ *
+ * $redisCluster->rPush('key1', 'A');
+ * $redisCluster->rPush('key1', 'B');
+ * $redisCluster->rPush('key1', 'C');
+ * $redisCluster->lRange('key1', 0, -1); // array('A', 'B', 'C')
+ * $redisCluster->lTrim('key1', 0, 1);
+ * $redisCluster->lRange('key1', 0, -1); // array('A', 'B')
+ *
+ */
+ public function lTrim($key, $start, $stop) { }
+
+ /**
+ * Returns the specified elements of the list stored at the specified key in
+ * the range [start, end]. start and stop are interpretated as indices: 0 the first element,
+ * 1 the second ... -1 the last element, -2 the penultimate ...
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ *
+ * @return array containing the values in specified range.
+ * @link https://redis.io/commands/lrange
+ * @example
+ *
+ * $redisCluster->rPush('key1', 'A');
+ * $redisCluster->rPush('key1', 'B');
+ * $redisCluster->rPush('key1', 'C');
+ * $redisCluster->lRange('key1', 0, -1); // array('A', 'B', 'C')
+ *
+ */
+ public function lRange($key, $start, $end) { }
+
+ /**
+ * Deletes the elements of the sorted set stored at the specified key which have rank in the range [start,end].
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ *
+ * @return int The number of values deleted from the sorted set
+ * @link https://redis.io/commands/zremrangebyrank
+ * @example
+ *
+ * $redisCluster->zAdd('key', 1, 'one');
+ * $redisCluster->zAdd('key', 2, 'two');
+ * $redisCluster->zAdd('key', 3, 'three');
+ * $redisCluster->zRemRangeByRank('key', 0, 1); // 2
+ * $redisCluster->zRange('key', 0, -1, true); // array('three' => 3)
+ *
+ */
+ public function zRemRangeByRank($key, $start, $end) { }
+
+ /**
+ * Publish messages to channels. Warning: this function will probably change in the future.
+ *
+ * @param string $channel a channel to publish to
+ * @param string $message string
+ *
+ * @link https://redis.io/commands/publish
+ * @return int Number of clients that received the message
+ * @example $redisCluster->publish('chan-1', 'hello, world!'); // send message.
+ */
+ public function publish($channel, $message) { }
+
+ /**
+ * Renames a key.
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/rename
+ * @example
+ *
+ * $redisCluster->set('x', '42');
+ * $redisCluster->rename('x', 'y');
+ * $redisCluster->get('y'); // → 42
+ * $redisCluster->get('x'); // → `FALSE`
+ *
+ */
+ public function rename($srcKey, $dstKey) { }
+
+ /**
+ * Renames a key.
+ *
+ * Same as rename, but will not replace a key if the destination already exists.
+ * This is the same behaviour as setNx.
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/renamenx
+ * @example
+ *
+ * $redisCluster->set('x', '42');
+ * $redisCluster->renameNx('x', 'y');
+ * $redisCluster->get('y'); // → 42
+ * $redisCluster->get('x'); // → `FALSE`
+ *
+ */
+ public function renameNx($srcKey, $dstKey) { }
+
+ /**
+ * When called with a single key, returns the approximated cardinality computed by the HyperLogLog data
+ * structure stored at the specified variable, which is 0 if the variable does not exist.
+ *
+ * @param string|array $key
+ *
+ * @return int
+ * @link https://redis.io/commands/pfcount
+ * @example
+ *
+ * $redisCluster->pfAdd('key1', array('elem1', 'elem2'));
+ * $redisCluster->pfAdd('key2', array('elem3', 'elem2'));
+ * $redisCluster->pfCount('key1'); // int(2)
+ * $redisCluster->pfCount(array('key1', 'key2')); // int(3)
+ */
+ public function pfCount($key) { }
+
+ /**
+ * Adds all the element arguments to the HyperLogLog data structure stored at the key.
+ *
+ * @param string $key
+ * @param array $elements
+ *
+ * @return bool
+ * @link https://redis.io/commands/pfadd
+ * @example $redisCluster->pfAdd('key', array('elem1', 'elem2'))
+ */
+ public function pfAdd($key, array $elements) { }
+
+ /**
+ * Merge multiple HyperLogLog values into an unique value that will approximate the cardinality
+ * of the union of the observed Sets of the source HyperLogLog structures.
+ *
+ * @param string $destKey
+ * @param array $sourceKeys
+ *
+ * @return bool
+ * @link https://redis.io/commands/pfmerge
+ * @example
+ *
+ * $redisCluster->pfAdd('key1', array('elem1', 'elem2'));
+ * $redisCluster->pfAdd('key2', array('elem3', 'elem2'));
+ * $redisCluster->pfMerge('key3', array('key1', 'key2'));
+ * $redisCluster->pfCount('key3'); // int(3)
+ */
+ public function pfMerge($destKey, array $sourceKeys) { }
+
+ /**
+ * Changes a substring of a larger string.
+ *
+ * @param string $key
+ * @param int $offset
+ * @param string $value
+ *
+ * @return string the length of the string after it was modified.
+ * @link https://redis.io/commands/setrange
+ * @example
+ *
+ * $redisCluster->set('key', 'Hello world');
+ * $redisCluster->setRange('key', 6, "redis"); // returns 11
+ * $redisCluster->get('key'); // "Hello redis"
+ *
+ */
+ public function setRange($key, $offset, $value) { }
+
+ /**
+ * Restore a key from the result of a DUMP operation.
+ *
+ * @param string $key The key name
+ * @param int $ttl How long the key should live (if zero, no expire will be set on the key)
+ * @param string $value (binary). The Redis encoded key value (from DUMP)
+ *
+ * @return bool
+ * @link https://redis.io/commands/restore
+ * @example
+ *
+ * $redisCluster->set('foo', 'bar');
+ * $val = $redisCluster->dump('foo');
+ * $redisCluster->restore('bar', 0, $val); // The key 'bar', will now be equal to the key 'foo'
+ *
+ */
+ public function restore($key, $ttl, $value) { }
+
+ /**
+ * Moves the specified member from the set at srcKey to the set at dstKey.
+ *
+ * @param string $srcKey
+ * @param string $dstKey
+ * @param string $member
+ *
+ * @return bool If the operation is successful, return TRUE.
+ * If the srcKey and/or dstKey didn't exist, and/or the member didn't exist in srcKey, FALSE is returned.
+ * @link https://redis.io/commands/smove
+ * @example
+ *
+ * $redisCluster->sAdd('key1' , 'set11');
+ * $redisCluster->sAdd('key1' , 'set12');
+ * $redisCluster->sAdd('key1' , 'set13'); // 'key1' => {'set11', 'set12', 'set13'}
+ * $redisCluster->sAdd('key2' , 'set21');
+ * $redisCluster->sAdd('key2' , 'set22'); // 'key2' => {'set21', 'set22'}
+ * $redisCluster->sMove('key1', 'key2', 'set13'); // 'key1' => {'set11', 'set12'}
+ * // 'key2' => {'set21', 'set22', 'set13'}
+ *
+ */
+ public function sMove($srcKey, $dstKey, $member) { }
+
+ /**
+ * Returns a range of elements from the ordered set stored at the specified key,
+ * with values in the range [start, end]. start and stop are interpreted as zero-based indices:
+ * 0 the first element,
+ * 1 the second ...
+ * -1 the last element,
+ * -2 the penultimate ...
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @param bool $withscores
+ *
+ * @return array Array containing the values in specified range.
+ * @link https://redis.io/commands/zrange
+ * @example
+ *
+ * $redisCluster->zAdd('key1', 0, 'val0');
+ * $redisCluster->zAdd('key1', 2, 'val2');
+ * $redisCluster->zAdd('key1', 10, 'val10');
+ * $redisCluster->zRange('key1', 0, -1); // array('val0', 'val2', 'val10')
+ * // with scores
+ * $redisCluster->zRange('key1', 0, -1, true); // array('val0' => 0, 'val2' => 2, 'val10' => 10)
+ *
+ */
+ public function zRange($key, $start, $end, $withscores = null) { }
+
+ /**
+ * Returns the elements of the sorted set stored at the specified key in the range [start, end]
+ * in reverse order. start and stop are interpretated as zero-based indices:
+ * 0 the first element,
+ * 1 the second ...
+ * -1 the last element,
+ * -2 the penultimate ...
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @param bool $withscore
+ *
+ * @return array Array containing the values in specified range.
+ * @link https://redis.io/commands/zrevrange
+ * @example
+ *
+ * $redisCluster->zAdd('key', 0, 'val0');
+ * $redisCluster->zAdd('key', 2, 'val2');
+ * $redisCluster->zAdd('key', 10, 'val10');
+ * $redisCluster->zRevRange('key', 0, -1); // array('val10', 'val2', 'val0')
+ *
+ * // with scores
+ * $redisCluster->zRevRange('key', 0, -1, true); // array('val10' => 10, 'val2' => 2, 'val0' => 0)
+ *
+ */
+ public function zRevRange($key, $start, $end, $withscore = null) { }
+
+ /**
+ * Returns the elements of the sorted set stored at the specified key which have scores in the
+ * range [start,end]. Adding a parenthesis before start or end excludes it from the range.
+ * +inf and -inf are also valid limits.
+ *
+ * zRevRangeByScore returns the same items in reverse order, when the start and end parameters are swapped.
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @param array $options Two options are available:
+ * - withscores => TRUE,
+ * - and limit => array($offset, $count)
+ *
+ * @return array Array containing the values in specified range.
+ * @link https://redis.io/commands/zrangebyscore
+ * @example
+ *
+ * $redisCluster->zAdd('key', 0, 'val0');
+ * $redisCluster->zAdd('key', 2, 'val2');
+ * $redisCluster->zAdd('key', 10, 'val10');
+ * $redisCluster->zRangeByScore('key', 0, 3);
+ * // array('val0', 'val2')
+ * $redisCluster->zRangeByScore('key', 0, 3, array('withscores' => TRUE);
+ * // array('val0' => 0, 'val2' => 2)
+ * $redisCluster->zRangeByScore('key', 0, 3, array('limit' => array(1, 1));
+ * // array('val2' => 2)
+ * $redisCluster->zRangeByScore('key', 0, 3, array('limit' => array(1, 1));
+ * // array('val2')
+ * $redisCluster->zRangeByScore('key', 0, 3, array('withscores' => TRUE, 'limit' => array(1, 1));
+ * // array('val2'=> 2)
+ *
+ */
+ public function zRangeByScore($key, $start, $end, array $options = array()) { }
+
+ /**
+ * @see zRangeByScore()
+ *
+ * @param string $key
+ * @param int $start
+ * @param int $end
+ * @param array $options
+ *
+ * @return array
+ */
+ public function zRevRangeByScore($key, $start, $end, array $options = array()) { }
+
+ /**
+ * Returns a range of members in a sorted set, by lexicographical range
+ *
+ * @param string $key The ZSET you wish to run against.
+ * @param int $min The minimum alphanumeric value you wish to get.
+ * @param int $max The maximum alphanumeric value you wish to get.
+ * @param int $offset Optional argument if you wish to start somewhere other than the first element.
+ * @param int $limit Optional argument if you wish to limit the number of elements returned.
+ *
+ * @return array Array containing the values in the specified range.
+ * @link https://redis.io/commands/zrangebylex
+ * @example
+ *
+ * foreach (array('a', 'b', 'c', 'd', 'e', 'f', 'g') as $k => $char) {
+ * $redisCluster->zAdd('key', $k, $char);
+ * }
+ *
+ * $redisCluster->zRangeByLex('key', '-', '[c'); // array('a', 'b', 'c')
+ * $redisCluster->zRangeByLex('key', '-', '(c'); // array('a', 'b')
+ * $redisCluster->zRevRangeByLex('key', '(c','-'); // array('b', 'a')
+ *
+ */
+ public function zRangeByLex($key, $min, $max, $offset = null, $limit = null) { }
+
+ /**
+ * @see zRangeByLex()
+ *
+ * @param string $key
+ * @param int $min
+ * @param int $max
+ * @param int $offset
+ * @param int $limit
+ *
+ * @return array
+ * @link https://redis.io/commands/zrevrangebylex
+ */
+ public function zRevRangeByLex($key, $min, $max, $offset = null, $limit = null) { }
+
+ /**
+ * Count the number of members in a sorted set between a given lexicographical range.
+ *
+ * @param string $key
+ * @param int $min
+ * @param int $max
+ *
+ * @return int The number of elements in the specified score range.
+ * @link https://redis.io/commands/zlexcount
+ * @example
+ *
+ * foreach (array('a', 'b', 'c', 'd', 'e', 'f', 'g') as $k => $char) {
+ * $redisCluster->zAdd('key', $k, $char);
+ * }
+ * $redisCluster->zLexCount('key', '[b', '[f'); // 5
+ *
+ */
+ public function zLexCount($key, $min, $max) { }
+
+ /**
+ * Remove all members in a sorted set between the given lexicographical range.
+ *
+ * @param string $key The ZSET you wish to run against.
+ * @param int $min The minimum alphanumeric value you wish to get.
+ * @param int $max The maximum alphanumeric value you wish to get.
+ *
+ * @return array the number of elements removed.
+ * @link https://redis.io/commands/zremrangebylex
+ * @example
+ *
+ * foreach (array('a', 'b', 'c', 'd', 'e', 'f', 'g') as $k => $char) {
+ * $redisCluster->zAdd('key', $k, $char);
+ * }
+ * $redisCluster->zRemRangeByLex('key', '(b','[d'); // 2 , remove element 'c' and 'd'
+ * $redisCluster->zRange('key',0,-1);// array('a','b','e','f','g')
+ *
+ */
+ public function zRemRangeByLex($key, $min, $max) {
+ }
+
+ /**
+ * Add multiple sorted sets and store the resulting sorted set in a new key
+ *
+ * @param string $Output
+ * @param array $ZSetKeys
+ * @param array $Weights
+ * @param string $aggregateFunction Either "SUM", "MIN", or "MAX": defines the behaviour to use on
+ * duplicate entries during the zUnion.
+ *
+ * @return int The number of values in the new sorted set.
+ * @link https://redis.io/commands/zunionstore
+ * @example
+ *
+ * $redisCluster->del('k1');
+ * $redisCluster->del('k2');
+ * $redisCluster->del('k3');
+ * $redisCluster->del('ko1');
+ * $redisCluster->del('ko2');
+ * $redisCluster->del('ko3');
+ *
+ * $redisCluster->zAdd('k1', 0, 'val0');
+ * $redisCluster->zAdd('k1', 1, 'val1');
+ *
+ * $redisCluster->zAdd('k2', 2, 'val2');
+ * $redisCluster->zAdd('k2', 3, 'val3');
+ *
+ * $redisCluster->zUnionStore('ko1', array('k1', 'k2')); // 4, 'ko1' => array('val0', 'val1', 'val2', 'val3')
+ *
+ * // Weighted zUnionStore
+ * $redisCluster->zUnionStore('ko2', array('k1', 'k2'), array(1, 1)); // 4, 'ko2' => array('val0', 'val1', 'val2','val3')
+ * $redisCluster->zUnionStore('ko3', array('k1', 'k2'), array(5, 1)); // 4, 'ko3' => array('val0', 'val2', 'val3','val1')
+ *
+ */
+ public function zUnionStore($Output, $ZSetKeys, array $Weights = null, $aggregateFunction = 'SUM') { }
+
+ /**
+ * Intersect multiple sorted sets and store the resulting sorted set in a new key
+ *
+ * @param string $Output
+ * @param array $ZSetKeys
+ * @param array $Weights
+ * @param string $aggregateFunction Either "SUM", "MIN", or "MAX":
+ * defines the behaviour to use on duplicate entries during the zInterStore.
+ *
+ * @return int The number of values in the new sorted set.
+ * @link https://redis.io/commands/zinterstore
+ * @example
+ *
+ * $redisCluster->del('k1');
+ * $redisCluster->del('k2');
+ * $redisCluster->del('k3');
+ *
+ * $redisCluster->del('ko1');
+ * $redisCluster->del('ko2');
+ * $redisCluster->del('ko3');
+ * $redisCluster->del('ko4');
+ *
+ * $redisCluster->zAdd('k1', 0, 'val0');
+ * $redisCluster->zAdd('k1', 1, 'val1');
+ * $redisCluster->zAdd('k1', 3, 'val3');
+ *
+ * $redisCluster->zAdd('k2', 2, 'val1');
+ * $redisCluster->zAdd('k2', 3, 'val3');
+ *
+ * $redisCluster->zInterStore('ko1', array('k1', 'k2')); // 2, 'ko1' => array('val1', 'val3')
+ * $redisCluster->zInterStore('ko2', array('k1', 'k2'), array(1, 1)); // 2, 'ko2' => array('val1', 'val3')
+ *
+ * // Weighted zInterStore
+ * $redisCluster->zInterStore('ko3', array('k1', 'k2'), array(1, 5), 'min'); // 2, 'ko3' => array('val1', 'val3')
+ * $redisCluster->zInterStore('ko4', array('k1', 'k2'), array(1, 5), 'max'); // 2, 'ko4' => array('val3', 'val1')
+ *
+ */
+ public function zInterStore($Output, $ZSetKeys, array $Weights = null, $aggregateFunction = 'SUM') { }
+
+ /**
+ * Deletes a specified member from the ordered set.
+ *
+ * @param string $key
+ * @param string $member1
+ * @param string $member2
+ * @param string $memberN
+ *
+ * @return int Number of deleted values
+ * @link https://redis.io/commands/zrem
+ * @example
+ *
+ * $redisCluster->zAdd('z', 1, 'v1', 2, 'v2', 3, 'v3', 4, 'v4' ); // int(2)
+ * $redisCluster->zRem('z', 'v2', 'v3'); // int(2)
+ * var_dump( $redisCluster->zRange('z', 0, -1) );
+ * //// Output:
+ * //
+ * // array(2) {
+ * // [0]=> string(2) "v1"
+ * // [1]=> string(2) "v4"
+ * // }
+ *
+ */
+ public function zRem($key, $member1, $member2 = null, $memberN = null) { }
+
+ /**
+ * Sort
+ *
+ * @param string $key
+ * @param array $option array(key => value, ...) - optional, with the following keys and values:
+ * - 'by' => 'some_pattern_*',
+ * - 'limit' => array(0, 1),
+ * - 'get' => 'some_other_pattern_*' or an array of patterns,
+ * - 'sort' => 'asc' or 'desc',
+ * - 'alpha' => TRUE,
+ * - 'store' => 'external-key'
+ *
+ * @return array
+ * An array of values, or a number corresponding to the number of elements stored if that was used.
+ * @link https://redis.io/commands/sort
+ * @example
+ *
+ * $redisCluster->del('s');
+ * $redisCluster->sadd('s', 5);
+ * $redisCluster->sadd('s', 4);
+ * $redisCluster->sadd('s', 2);
+ * $redisCluster->sadd('s', 1);
+ * $redisCluster->sadd('s', 3);
+ *
+ * var_dump($redisCluster->sort('s')); // 1,2,3,4,5
+ * var_dump($redisCluster->sort('s', array('sort' => 'desc'))); // 5,4,3,2,1
+ * var_dump($redisCluster->sort('s', array('sort' => 'desc', 'store' => 'out'))); // (int)5
+ *
+ */
+ public function sort($key, $option = null) { }
+
+ /**
+ * Describes the object pointed to by a key.
+ * The information to retrieve (string) and the key (string).
+ * Info can be one of the following:
+ * - "encoding"
+ * - "refcount"
+ * - "idletime"
+ *
+ * @param string $string
+ * @param string $key
+ *
+ * @return string|false for "encoding", int for "refcount" and "idletime", FALSE if the key doesn't exist.
+ * @link https://redis.io/commands/object
+ * @example
+ *
+ * $redisCluster->object("encoding", "l"); // → ziplist
+ * $redisCluster->object("refcount", "l"); // → 1
+ * $redisCluster->object("idletime", "l"); // → 400 (in seconds, with a precision of 10 seconds).
+ *
+ */
+ public function object($string = '', $key = '') { }
+
+ /**
+ * Subscribe to channels. Warning: this function will probably change in the future.
+ *
+ * @param array $channels an array of channels to subscribe to
+ * @param string|array $callback either a string or an array($instance, 'method_name').
+ * The callback function receives 3 parameters: the redis instance, the channel
+ * name, and the message.
+ *
+ * @return mixed Any non-null return value in the callback will be returned to the caller.
+ * @link https://redis.io/commands/subscribe
+ * @example
+ *
+ * function f($redisCluster, $chan, $msg) {
+ * switch($chan) {
+ * case 'chan-1':
+ * ...
+ * break;
+ *
+ * case 'chan-2':
+ * ...
+ * break;
+ *
+ * case 'chan-2':
+ * ...
+ * break;
+ * }
+ * }
+ *
+ * $redisCluster->subscribe(array('chan-1', 'chan-2', 'chan-3'), 'f'); // subscribe to 3 chans
+ *
+ */
+ public function subscribe($channels, $callback) { }
+
+ /**
+ * Subscribe to channels by pattern
+ *
+ * @param array $patterns The number of elements removed from the set.
+ * @param string|array $callback Either a string or an array with an object and method.
+ * The callback will get four arguments ($redis, $pattern, $channel, $message)
+ *
+ * @return mixed Any non-null return value in the callback will be returned to the caller.
+ *
+ * @link https://redis.io/commands/psubscribe
+ * @example
+ *
+ * function psubscribe($redisCluster, $pattern, $chan, $msg) {
+ * echo "Pattern: $pattern\n";
+ * echo "Channel: $chan\n";
+ * echo "Payload: $msg\n";
+ * }
+ *
+ */
+ public function psubscribe($patterns, $callback) { }
+
+ /**
+ * Unsubscribes the client from the given channels, or from all of them if none is given.
+ *
+ * @param $channels
+ * @param $callback
+ */
+ public function unSubscribe($channels, $callback) { }
+
+ /**
+ * Unsubscribes the client from the given patterns, or from all of them if none is given.
+ *
+ * @param $channels
+ * @param $callback
+ */
+ public function punSubscribe($channels, $callback) { }
+
+ /**
+ * Evaluate a LUA script serverside, from the SHA1 hash of the script instead of the script itself.
+ * In order to run this command Redis will have to have already loaded the script, either by running it or via
+ * the SCRIPT LOAD command.
+ *
+ * @param string $scriptSha
+ * @param array $args
+ * @param int $numKeys
+ *
+ * @return mixed @see eval()
+ * @see eval()
+ * @link https://redis.io/commands/evalsha
+ * @example
+ *
+ * $script = 'return 1';
+ * $sha = $redisCluster->script('load', $script);
+ * $redisCluster->evalSha($sha); // Returns 1
+ *
+ */
+ public function evalSha($scriptSha, $args = array(), $numKeys = 0) { }
+
+ /**
+ * Scan the keyspace for keys.
+ *
+ * @param int &$iterator Iterator, initialized to NULL.
+ * @param string|array $node Node identified by key or host/port array
+ * @param string $pattern Pattern to match.
+ * @param int $count Count of keys per iteration (only a suggestion to Redis).
+ *
+ * @return array|false This function will return an array of keys or FALSE if there are no more keys.
+ * @link https://redis.io/commands/scan
+ * @example
+ *
+ * $iterator = null;
+ * while($keys = $redisCluster->scan($iterator)) {
+ * foreach($keys as $key) {
+ * echo $key . PHP_EOL;
+ * }
+ * }
+ *
+ */
+ public function scan(&$iterator, $node, $pattern = null, $count = 0) { }
+
+ /**
+ * Scan a set for members.
+ *
+ * @param string $key The set to search.
+ * @param int $iterator LONG (reference) to the iterator as we go.
+ * @param null $pattern String, optional pattern to match against.
+ * @param int $count How many members to return at a time (Redis might return a different amount).
+ *
+ * @return array|false PHPRedis will return an array of keys or FALSE when we're done iterating.
+ * @link https://redis.io/commands/sscan
+ * @example
+ *
+ * $iterator = null;
+ * while ($members = $redisCluster->sScan('set', $iterator)) {
+ * foreach ($members as $member) {
+ * echo $member . PHP_EOL;
+ * }
+ * }
+ *
+ */
+ public function sScan($key, &$iterator, $pattern = null, $count = 0) { }
+
+ /**
+ * Scan a sorted set for members, with optional pattern and count.
+ *
+ * @param string $key String, the set to scan.
+ * @param int $iterator Long (reference), initialized to NULL.
+ * @param string $pattern String (optional), the pattern to match.
+ * @param int $count How many keys to return per iteration (Redis might return a different number).
+ *
+ * @return array|false PHPRedis will return matching keys from Redis, or FALSE when iteration is complete.
+ * @link https://redis.io/commands/zscan
+ * @example
+ *
+ * $iterator = null;
+ * while ($members = $redis-zscan('zset', $iterator)) {
+ * foreach ($members as $member => $score) {
+ * echo $member . ' => ' . $score . PHP_EOL;
+ * }
+ * }
+ *
+ */
+ public function zScan($key, &$iterator, $pattern = null, $count = 0) { }
+
+ /**
+ * Scan a HASH value for members, with an optional pattern and count.
+ *
+ * @param string $key
+ * @param int $iterator
+ * @param string $pattern Optional pattern to match against.
+ * @param int $count How many keys to return in a go (only a sugestion to Redis).
+ *
+ * @return array An array of members that match our pattern.
+ * @link https://redis.io/commands/hscan
+ * @example
+ *
+ * $iterator = null;
+ * while($elements = $redisCluster->hscan('hash', $iterator)) {
+ * foreach($elements as $key => $value) {
+ * echo $key . ' => ' . $value . PHP_EOL;
+ * }
+ * }
+ *
+ */
+ public function hScan($key, &$iterator, $pattern = null, $count = 0) { }
+
+ /**
+ * Detect whether we're in ATOMIC/MULTI/PIPELINE mode.
+ *
+ * @return int Either RedisCluster::ATOMIC, RedisCluster::MULTI or RedisCluster::PIPELINE
+ * @example $redisCluster->getMode();
+ */
+ public function getMode() { }
+
+ /**
+ * The last error message (if any)
+ *
+ * @return string|null A string with the last returned script based error message, or NULL if there is no error
+ * @example
+ *
+ * $redisCluster->eval('this-is-not-lua');
+ * $err = $redisCluster->getLastError();
+ * // "ERR Error compiling script (new function): user_script:1: '=' expected near '-'"
+ *
+ */
+ public function getLastError() { }
+
+ /**
+ * Clear the last error message
+ *
+ * @return bool true
+ * @example
+ *
+ * $redisCluster->set('x', 'a');
+ * $redisCluster->incr('x');
+ * $err = $redisCluster->getLastError();
+ * // "ERR value is not an integer or out of range"
+ * $redisCluster->clearLastError();
+ * $err = $redisCluster->getLastError();
+ * // NULL
+ *
+ */
+ public function clearLastError() { }
+
+ /**
+ * Get client option
+ *
+ * @param string $name parameter name
+ *
+ * @return int Parameter value.
+ * @example
+ * // return RedisCluster::SERIALIZER_NONE, RedisCluster::SERIALIZER_PHP, or RedisCluster::SERIALIZER_IGBINARY.
+ * $redisCluster->getOption(RedisCluster::OPT_SERIALIZER);
+ */
+ public function getOption($name) { }
+
+ /**
+ * Set client option.
+ *
+ * @param string $name parameter name
+ * @param string $value parameter value
+ *
+ * @return bool TRUE on success, FALSE on error.
+ * @example
+ *
+ * $redisCluster->setOption(RedisCluster::OPT_SERIALIZER, RedisCluster::SERIALIZER_NONE); // don't serialize data
+ * $redisCluster->setOption(RedisCluster::OPT_SERIALIZER, RedisCluster::SERIALIZER_PHP); // use built-in serialize/unserialize
+ * $redisCluster->setOption(RedisCluster::OPT_SERIALIZER, RedisCluster::SERIALIZER_IGBINARY); // use igBinary serialize/unserialize
+ * $redisCluster->setOption(RedisCluster::OPT_PREFIX, 'myAppName:'); // use custom prefix on all keys
+ *
+ */
+ public function setOption($name, $value) { }
+
+ /**
+ * A utility method to prefix the value with the prefix setting for phpredis.
+ *
+ * @param mixed $value The value you wish to prefix
+ *
+ * @return string If a prefix is set up, the value now prefixed. If there is no prefix, the value will be returned unchanged.
+ * @example
+ *
+ * $redisCluster->setOption(RedisCluster::OPT_PREFIX, 'my-prefix:');
+ * $redisCluster->_prefix('my-value'); // Will return 'my-prefix:my-value'
+ *
+ */
+ public function _prefix($value) { }
+
+ /**
+ * A utility method to serialize values manually. This method allows you to serialize a value with whatever
+ * serializer is configured, manually. This can be useful for serialization/unserialization of data going in
+ * and out of EVAL commands as phpredis can't automatically do this itself. Note that if no serializer is
+ * set, phpredis will change Array values to 'Array', and Objects to 'Object'.
+ *
+ * @param mixed $value The value to be serialized.
+ *
+ * @return mixed
+ * @example
+ *
+ * $redisCluster->setOption(RedisCluster::OPT_SERIALIZER, RedisCluster::SERIALIZER_NONE);
+ * $redisCluster->_serialize("foo"); // returns "foo"
+ * $redisCluster->_serialize(Array()); // Returns "Array"
+ * $redisCluster->_serialize(new stdClass()); // Returns "Object"
+ *
+ * $redisCluster->setOption(RedisCluster::OPT_SERIALIZER, RedisCluster::SERIALIZER_PHP);
+ * $redisCluster->_serialize("foo"); // Returns 's:3:"foo";'
+ *
+ */
+ public function _serialize($value) { }
+
+ /**
+ * A utility method to unserialize data with whatever serializer is set up. If there is no serializer set, the
+ * value will be returned unchanged. If there is a serializer set up, and the data passed in is malformed, an
+ * exception will be thrown. This can be useful if phpredis is serializing values, and you return something from
+ * redis in a LUA script that is serialized.
+ *
+ * @param string $value The value to be unserialized
+ *
+ * @return mixed
+ * @example
+ *
+ * $redisCluster->setOption(RedisCluster::OPT_SERIALIZER, RedisCluster::SERIALIZER_PHP);
+ * $redisCluster->_unserialize('a:3:{i:0;i:1;i:1;i:2;i:2;i:3;}'); // Will return Array(1,2,3)
+ *
+ */
+ public function _unserialize($value) { }
+
+ /**
+ * Return all redis master nodes
+ *
+ * @return array
+ * @example
+ *
+ * $redisCluster->_masters(); // Will return [[0=>'127.0.0.1','6379'],[0=>'127.0.0.1','6380']]
+ *
+ */
+ public function _masters() { }
+
+ /**
+ * Enter and exit transactional mode.
+ *
+ * @param int $mode RedisCluster::MULTI|RedisCluster::PIPELINE
+ * Defaults to RedisCluster::MULTI.
+ * A RedisCluster::MULTI block of commands runs as a single transaction;
+ * a RedisCluster::PIPELINE block is simply transmitted faster to the server, but without any guarantee
+ * of atomicity. discard cancels a transaction.
+ *
+ * @return Redis returns the Redis instance and enters multi-mode.
+ * Once in multi-mode, all subsequent method calls return the same object until exec() is called.
+ * @link https://redis.io/commands/multi
+ * @example
+ *
+ * $ret = $redisCluster->multi()
+ * ->set('key1', 'val1')
+ * ->get('key1')
+ * ->set('key2', 'val2')
+ * ->get('key2')
+ * ->exec();
+ *
+ * //$ret == array (
+ * // 0 => TRUE,
+ * // 1 => 'val1',
+ * // 2 => TRUE,
+ * // 3 => 'val2');
+ *
+ */
+ public function multi($mode = RedisCluster::MULTI) { }
+
+ /**
+ * @see multi()
+ * @return void|array
+ * @link https://redis.io/commands/exec
+ */
+ public function exec() { }
+
+ /**
+ * @see multi()
+ * @link https://redis.io/commands/discard
+ */
+ public function discard() { }
+
+ /**
+ * Watches a key for modifications by another client. If the key is modified between WATCH and EXEC,
+ * the MULTI/EXEC transaction will fail (return FALSE). unwatch cancels all the watching of all keys by this client.
+ *
+ * @param string|array $key : a list of keys
+ *
+ * @return void
+ * @link https://redis.io/commands/watch
+ * @example
+ *
+ * $redisCluster->watch('x');
+ * // long code here during the execution of which other clients could well modify `x`
+ * $ret = $redisCluster->multi()
+ * ->incr('x')
+ * ->exec();
+ * // $ret = FALSE if x has been modified between the call to WATCH and the call to EXEC.
+ *
+ */
+ public function watch($key) { }
+
+ /**
+ * @see watch()
+ * @link https://redis.io/commands/unwatch
+ */
+ public function unwatch() { }
+
+ /**
+ * Performs a synchronous save at a specific node.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * If a save is already running, this command will fail and return FALSE.
+ * @link https://redis.io/commands/save
+ * @example
+ * $redisCluster->save('x'); //key
+ * $redisCluster->save(['127.0.0.1',6379]); //[host,port]
+ */
+ public function save($nodeParams) { }
+
+ /**
+ * Performs a background save at a specific node.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * If a save is already running, this command will fail and return FALSE.
+ * @link https://redis.io/commands/bgsave
+ */
+ public function bgsave($nodeParams) { }
+
+ /**
+ * Removes all entries from the current database at a specific node.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return bool Always TRUE.
+ * @link https://redis.io/commands/flushdb
+ */
+ public function flushDB($nodeParams) { }
+
+ /**
+ * Removes all entries from all databases at a specific node.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return bool Always TRUE.
+ * @link https://redis.io/commands/flushall
+ */
+ public function flushAll($nodeParams) { }
+
+ /**
+ * Returns the current database's size at a specific node.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return int DB size, in number of keys.
+ * @link https://redis.io/commands/dbsize
+ * @example
+ *
+ * $count = $redisCluster->dbSize('x');
+ * echo "Redis has $count keys\n";
+ *
+ */
+ public function dbSize($nodeParams) { }
+
+ /**
+ * Starts the background rewrite of AOF (Append-Only File) at a specific node.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return bool TRUE in case of success, FALSE in case of failure.
+ * @link https://redis.io/commands/bgrewriteaof
+ * @example $redisCluster->bgrewriteaof('x');
+ */
+ public function bgrewriteaof($nodeParams) { }
+
+ /**
+ * Returns the timestamp of the last disk save at a specific node.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return int timestamp.
+ * @link https://redis.io/commands/lastsave
+ * @example $redisCluster->lastSave('x');
+ */
+ public function lastSave($nodeParams) { }
+
+ /**
+ * Returns an associative array of strings and integers
+ *
+ * @param string $option Optional. The option to provide redis.
+ * SERVER | CLIENTS | MEMORY | PERSISTENCE | STATS | REPLICATION | CPU | CLASTER | KEYSPACE
+ * | COMANDSTATS
+ *
+ * Returns an associative array of strings and integers, with the following keys:
+ * - redis_version
+ * - redis_git_sha1
+ * - redis_git_dirty
+ * - redis_build_id
+ * - redis_mode
+ * - os
+ * - arch_bits
+ * - multiplexing_api
+ * - atomicvar_api
+ * - gcc_version
+ * - process_id
+ * - run_id
+ * - tcp_port
+ * - uptime_in_seconds
+ * - uptime_in_days
+ * - hz
+ * - lru_clock
+ * - executable
+ * - config_file
+ * - connected_clients
+ * - client_longest_output_list
+ * - client_biggest_input_buf
+ * - blocked_clients
+ * - used_memory
+ * - used_memory_human
+ * - used_memory_rss
+ * - used_memory_rss_human
+ * - used_memory_peak
+ * - used_memory_peak_human
+ * - used_memory_peak_perc
+ * - used_memory_peak
+ * - used_memory_overhead
+ * - used_memory_startup
+ * - used_memory_dataset
+ * - used_memory_dataset_perc
+ * - total_system_memory
+ * - total_system_memory_human
+ * - used_memory_lua
+ * - used_memory_lua_human
+ * - maxmemory
+ * - maxmemory_human
+ * - maxmemory_policy
+ * - mem_fragmentation_ratio
+ * - mem_allocator
+ * - active_defrag_running
+ * - lazyfree_pending_objects
+ * - mem_fragmentation_ratio
+ * - loading
+ * - rdb_changes_since_last_save
+ * - rdb_bgsave_in_progress
+ * - rdb_last_save_time
+ * - rdb_last_bgsave_status
+ * - rdb_last_bgsave_time_sec
+ * - rdb_current_bgsave_time_sec
+ * - rdb_last_cow_size
+ * - aof_enabled
+ * - aof_rewrite_in_progress
+ * - aof_rewrite_scheduled
+ * - aof_last_rewrite_time_sec
+ * - aof_current_rewrite_time_sec
+ * - aof_last_bgrewrite_status
+ * - aof_last_write_status
+ * - aof_last_cow_size
+ * - changes_since_last_save
+ * - aof_current_size
+ * - aof_base_size
+ * - aof_pending_rewrite
+ * - aof_buffer_length
+ * - aof_rewrite_buffer_length
+ * - aof_pending_bio_fsync
+ * - aof_delayed_fsync
+ * - loading_start_time
+ * - loading_total_bytes
+ * - loading_loaded_bytes
+ * - loading_loaded_perc
+ * - loading_eta_seconds
+ * - total_connections_received
+ * - total_commands_processed
+ * - instantaneous_ops_per_sec
+ * - total_net_input_bytes
+ * - total_net_output_bytes
+ * - instantaneous_input_kbps
+ * - instantaneous_output_kbps
+ * - rejected_connections
+ * - maxclients
+ * - sync_full
+ * - sync_partial_ok
+ * - sync_partial_err
+ * - expired_keys
+ * - evicted_keys
+ * - keyspace_hits
+ * - keyspace_misses
+ * - pubsub_channels
+ * - pubsub_patterns
+ * - latest_fork_usec
+ * - migrate_cached_sockets
+ * - slave_expires_tracked_keys
+ * - active_defrag_hits
+ * - active_defrag_misses
+ * - active_defrag_key_hits
+ * - active_defrag_key_misses
+ * - role
+ * - master_replid
+ * - master_replid2
+ * - master_repl_offset
+ * - second_repl_offset
+ * - repl_backlog_active
+ * - repl_backlog_size
+ * - repl_backlog_first_byte_offset
+ * - repl_backlog_histlen
+ * - master_host
+ * - master_port
+ * - master_link_status
+ * - master_last_io_seconds_ago
+ * - master_sync_in_progress
+ * - slave_repl_offset
+ * - slave_priority
+ * - slave_read_only
+ * - master_sync_left_bytes
+ * - master_sync_last_io_seconds_ago
+ * - master_link_down_since_seconds
+ * - connected_slaves
+ * - min-slaves-to-write
+ * - min-replicas-to-write
+ * - min_slaves_good_slaves
+ * - used_cpu_sys
+ * - used_cpu_user
+ * - used_cpu_sys_children
+ * - used_cpu_user_children
+ * - cluster_enabled
+ *
+ * @link https://redis.io/commands/info
+ * @return array
+ * @example
+ *
+ * $redisCluster->info();
+ *
+ * or
+ *
+ * $redisCluster->info("COMMANDSTATS"); //Information on the commands that have been run (>=2.6 only)
+ * $redisCluster->info("CPU"); // just CPU information from Redis INFO
+ *
+ */
+ public function info($option = null) { }
+
+ /**
+ * @since redis >= 2.8.12.
+ * Returns the role of the instance in the context of replication
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return array
+ * @link https://redis.io/commands/role
+ * @example
+ *
+ * $redisCluster->role(['127.0.0.1',6379]);
+ * // [ 0=>'master',1 => 3129659, 2 => [ ['127.0.0.1','9001','3129242'], ['127.0.0.1','9002','3129543'] ] ]
+ *
+ */
+ public function role($nodeParams) { }
+
+ /**
+ * Returns a random key at the specified node
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return string an existing key in redis.
+ * @link https://redis.io/commands/randomkey
+ * @example
+ *
+ * $key = $redisCluster->randomKey('x');
+ * $surprise = $redisCluster->get($key); // who knows what's in there.
+ *
+ */
+ public function randomKey($nodeParams) { }
+
+ /**
+ * Return the specified node server time.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return array If successfully, the time will come back as an associative array with element zero being the
+ * unix timestamp, and element one being microseconds.
+ * @link https://redis.io/commands/time
+ * @example
+ *
+ * var_dump( $redisCluster->time('x') );
+ * //// Output:
+ * //
+ * // array(2) {
+ * // [0] => string(10) "1342364352"
+ * // [1] => string(6) "253002"
+ * // }
+ *
+ */
+ public function time($nodeParams) { }
+
+ /**
+ * Check the specified node status
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @return string STRING: +PONG on success. Throws a RedisException object on connectivity error, as described
+ * above.
+ * @link https://redis.io/commands/ping
+ */
+ public function ping($nodeParams) { }
+
+ /**
+ * Returns message.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ * @param string $msg
+ *
+ * @return mixed
+ */
+ public function echo ($nodeParams, $msg) { }
+
+ /**
+ * Returns Array reply of details about all Redis Cluster commands.
+ *
+ * @return mixed array | bool
+ */
+ public function command() { }
+
+ /**
+ * Send arbitrary things to the redis server at the specified node
+ *
+ * @param string|array $nodeParams key or [host,port]
+ * @param string $command Required command to send to the server.
+ * @param mixed $arguments Optional variable amount of arguments to send to the server.
+ *
+ * @return mixed
+ */
+ public function rawCommand($nodeParams, $command, $arguments) { }
+
+ /**
+ * @since redis >= 3.0
+ * Executes cluster command
+ *
+ * @param string|array $nodeParams key or [host,port]
+ * @param string $command Required command to send to the server.
+ * @param mixed $arguments Optional variable amount of arguments to send to the server.
+ *
+ * @return mixed
+ * @link https://redis.io/commands#cluster
+ * @example
+ *
+ * $redisCluster->cluster(['127.0.0.1',6379],'INFO');
+ *
+ */
+ public function cluster($nodeParams, $command, $arguments) { }
+
+ /**
+ * Allows you to get information of the cluster client
+ *
+ * @param string|array $nodeParams key or [host,port]
+ * @param string $subCmd can be: 'LIST', 'KILL', 'GETNAME', or 'SETNAME'
+ * @param string $args optional arguments
+ */
+ public function client($nodeParams, $subCmd, $args) { }
+
+ /**
+ * Get or Set the redis config keys.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ * @param string $operation either `GET` or `SET`
+ * @param string $key for `SET`, glob-pattern for `GET`. See https://redis.io/commands/config-get for examples.
+ * @param string $value optional string (only for `SET`)
+ *
+ * @return array Associative array for `GET`, key -> value
+ * @link https://redis.io/commands/config-get
+ * @link https://redis.io/commands/config-set
+ * @example
+ *
+ * $redisCluster->config(['127.0.0.1',6379], "GET", "*max-*-entries*");
+ * $redisCluster->config(['127.0.0.1',6379], "SET", "dir", "/var/run/redis/dumps/");
+ *
+ */
+ public function config($nodeParams, $operation, $key, $value) { }
+
+ /**
+ * A command allowing you to get information on the Redis pub/sub system.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ *
+ * @param string $keyword String, which can be: "channels", "numsub", or "numpat"
+ * @param string|array $argument Optional, variant.
+ * For the "channels" subcommand, you can pass a string pattern.
+ * For "numsub" an array of channel names
+ *
+ * @return array|int Either an integer or an array.
+ * - channels Returns an array where the members are the matching channels.
+ * - numsub Returns a key/value array where the keys are channel names and
+ * values are their counts.
+ * - numpat Integer return containing the number active pattern subscriptions.
+ * @link https://redis.io/commands/pubsub
+ * @example
+ *
+ * $redisCluster->pubsub(['127.0.0.1',6379], 'channels'); // All channels
+ * $redisCluster->pubsub(['127.0.0.1',6379], 'channels', '*pattern*'); // Just channels matching your pattern
+ * $redisCluster->pubsub(['127.0.0.1',6379], 'numsub', array('chan1', 'chan2')); // Get subscriber counts for
+ * 'chan1' and 'chan2'
+ * $redisCluster->pubsub(['127.0.0.1',6379], 'numpat'); // Get the number of pattern subscribers
+ *
+ */
+ public function pubsub($nodeParams, $keyword, $argument) { }
+
+ /**
+ * Execute the Redis SCRIPT command to perform various operations on the scripting subsystem.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ * @param string $command load | flush | kill | exists
+ * @param string $script
+ *
+ * @return mixed
+ * @link https://redis.io/commands/script-load
+ * @link https://redis.io/commands/script-kill
+ * @link https://redis.io/commands/script-flush
+ * @link https://redis.io/commands/script-exists
+ * @example
+ *
+ * $redisCluster->script(['127.0.0.1',6379], 'load', $script);
+ * $redisCluster->script(['127.0.0.1',6379], 'flush');
+ * $redisCluster->script(['127.0.0.1',6379], 'kill');
+ * $redisCluster->script(['127.0.0.1',6379], 'exists', $script1, [$script2, $script3, ...]);
+ *
+ *
+ * SCRIPT LOAD will return the SHA1 hash of the passed script on success, and FALSE on failure.
+ * SCRIPT FLUSH should always return TRUE
+ * SCRIPT KILL will return true if a script was able to be killed and false if not
+ * SCRIPT EXISTS will return an array with TRUE or FALSE for each passed script
+ */
+ public function script($nodeParams, $command, $script) { }
+
+ /**
+ * This function is used in order to read and reset the Redis slow queries log.
+ *
+ * @param string|array $nodeParams key or [host,port]
+ * @param string $command
+ * @param mixed $argument
+ *
+ * @link https://redis.io/commands/slowlog
+ * @example
+ *
+ * $redisCluster->slowLog(['127.0.0.1',6379],'get','2');
+ *
+ */
+ public function slowLog($nodeParams, $command, $argument) { }
+
+ /**
+ * Add one or more geospatial items in the geospatial index represented using a sorted set
+ *
+ * @param string $key
+ * @param float $longitude
+ * @param float $latitude
+ * @param string $member
+ *
+ * @link https://redis.io/commands/geoadd
+ * @example
+ *
+ * $redisCluster->geoAdd('Sicily', 13.361389, 38.115556, 'Palermo'); // int(1)
+ * $redisCluster->geoAdd('Sicily', 15.087269, 37.502669, "Catania"); // int(1)
+ *
+ */
+ public function geoAdd($key, $longitude, $latitude, $member) { }
+
+ /**
+ * Returns members of a geospatial index as standard geohash strings
+ *
+ * @param $key string
+ * @param $member1 string
+ * @param $member2 string
+ * @param $memberN string
+ *
+ * @example
+ *
+ * $redisCluster->geoAdd('Sicily', 13.361389, 38.115556, 'Palermo'); // int(1)
+ * $redisCluster->geoAdd('Sicily', 15.087269, 37.502669, "Catania"); // int(1)
+ * $redisCluster->geohash('Sicily','Palermo','Catania');//['sqc8b49rny0','sqdtr74hyu0']
+ *
+ */
+ public function geohash($key, $member1, $member2 = null, $memberN = null) { }
+
+ /**
+ * Returns longitude and latitude of members of a geospatial index
+ *
+ * @param $key string
+ * @param $member1 string
+ * @param $member2 string
+ * @param $memberN string
+ *
+ * @example
+ *
+ * $redisCluster->geoAdd('Sicily', 15.087269, 37.502669, "Catania"); // int(1)
+ * $redisCluster->geopos('Sicily','Palermo');//[['13.36138933897018433','38.11555639549629859']]
+ *
+ */
+ public function geopos($key, $member1, $member2 = null, $memberN = null) { }
+
+ /**
+ *
+ * Returns the distance between two members of a geospatial index
+ *
+ * @param string $key
+ * @param string $member1
+ * @param string $member2
+ * @param string $unit The unit must be one of the following, and defaults to meters:
+ * m for meters.
+ * km for kilometers.
+ * mi for miles.
+ * ft for feet.
+ *
+ * @link https://redis.io/commands/geoadd
+ * @example
+ *
+ * $redisCluster->geoAdd('Sicily', 13.361389, 38.115556, 'Palermo'); // int(1)
+ * $redisCluster->geoAdd('Sicily', 15.087269, 37.502669, "Catania"); // int(1)
+ * $redisCluster->geoDist('Sicily', 'Palermo' ,'Catania'); // float(166274.1516)
+ * $redisCluster->geoDist('Sicily', 'Palermo','Catania', 'km'); // float(166.2742)
+ *
+ */
+ public function geoDist($key, $member1, $member2, $unit = 'm') { }
+
+ /**
+ * Query a sorted set representing a geospatial index to fetch members matching a given maximum distance from a point
+ *
+ * @param string $key
+ * @param float $longitude
+ * @param float $latitude
+ * @param float $radius
+ * @param string $radiusUnit String can be: "m" for meters; "km" for kilometers , "mi" for miles, or "ft" for feet.
+ * @param array $options
+ *
+ * @link https://redis.io/commands/georadius
+ * @example
+ *
+ * $redisCluster->del('Sicily');
+ * $redisCluster->geoAdd('Sicily', 12.361389, 35.115556, 'Palermo'); // int(1)
+ * $redisCluster->geoAdd('Sicily', 15.087269, 37.502669, "Catania"); // int(1)
+ * $redisCluster->geoAdd('Sicily', 13.3585, 35.330022, "Agrigento"); // int(1)
+ *
+ * var_dump( $redisCluster->geoRadius('Sicily',13.3585, 35.330022, 300, 'km', ['WITHDIST' ,'DESC']) );
+ *
+ * array(3) {
+ * [0]=>
+ * array(2) {
+ * [0]=>
+ * string(7) "Catania"
+ * [1]=>
+ * string(8) "286.9362"
+ * }
+ * [1]=>
+ * array(2) {
+ * [0]=>
+ * string(7) "Palermo"
+ * [1]=>
+ * string(7) "93.6874"
+ * }
+ * [2]=>
+ * array(2) {
+ * [0]=>
+ * string(9) "Agrigento"
+ * [1]=>
+ * string(6) "0.0002"
+ * }
+ * }
+ * var_dump( $redisCluster->geoRadiusByMember('Sicily','Agrigento', 100, 'km', ['WITHDIST' ,'DESC']) );
+ *
+ * * array(2) {
+ * [0]=>
+ * array(2) {
+ * [0]=>
+ * string(7) "Palermo"
+ * [1]=>
+ * string(7) "93.6872"
+ * }
+ * [1]=>
+ * array(2) {
+ * [0]=>
+ * string(9) "Agrigento"
+ * [1]=>
+ * string(6) "0.0000"
+ * }
+ * }
+ *
+ *
+ */
+ public function geoRadius($key, $longitude, $latitude, $radius, $radiusUnit, array $options) { }
+
+ /**
+ * Query a sorted set representing a geospatial index to fetch members matching a given maximum distance from a member
+ *
+ * @see geoRadius
+ *
+ * @param string $key
+ * @param string $member
+ * @param float $radius
+ * @param string $radiusUnit
+ * @param array $options
+ */
+ public function geoRadiusByMember($key, $member, $radius, $radiusUnit, array $options) { }
+
+}
+
+class RedisClusterException extends Exception {}
diff --git a/psalm.xml b/psalm.xml
new file mode 100644
index 0000000000..47825b3164
--- /dev/null
+++ b/psalm.xml
@@ -0,0 +1,38 @@
+
+
+
+
+
+
+
+
+
+
+