[tx-robot] updated from transifex

apps/dav/l10n/pl.js

@@ -95,7 +95,7 @@ OC.L10N.register(
     "Are you accepting the invitation?" : "Czy akceptujesz zaproszenie?",
     "Tentative" : "Niepewne",
     "Save" : "Zapisz",
-    "Your attendance was updated successfully." : "Twoja obecność została zmieniona.",
+    "Your attendance was updated successfully." : "Twoja obecność została pomyślnie zaktualizowana.",
     "Calendar server" : "Serwer kalendarza",
     "Also install the {calendarappstoreopen}Calendar app{linkclose}, or {calendardocopen}connect your desktop & mobile for syncing ↗{linkclose}." : "Zainstaluj także {calendarappstoreopen}aplikację Kalendarz{linkclose} lub {calendardocopen}połącz swój komputer i telefon komórkowy, aby zsynchronizować ↗{linkclose}.",
     "Send invitations to attendees" : "Wyślij zaproszenia do uczestników",

apps/dav/l10n/pl.json

@@ -93,7 +93,7 @@
     "Are you accepting the invitation?" : "Czy akceptujesz zaproszenie?",
     "Tentative" : "Niepewne",
     "Save" : "Zapisz",
-    "Your attendance was updated successfully." : "Twoja obecność została zmieniona.",
+    "Your attendance was updated successfully." : "Twoja obecność została pomyślnie zaktualizowana.",
     "Calendar server" : "Serwer kalendarza",
     "Also install the {calendarappstoreopen}Calendar app{linkclose}, or {calendardocopen}connect your desktop & mobile for syncing ↗{linkclose}." : "Zainstaluj także {calendarappstoreopen}aplikację Kalendarz{linkclose} lub {calendardocopen}połącz swój komputer i telefon komórkowy, aby zsynchronizować ↗{linkclose}.",
     "Send invitations to attendees" : "Wyślij zaproszenia do uczestników",

apps/encryption/l10n/pl.js

@@ -4,9 +4,9 @@ OC.L10N.register(
     "Missing recovery key password" : "Brakujące hasło klucza odzyskiwania",
     "Please repeat the recovery key password" : "Powtórz hasło klucza odzyskiwania",
     "Repeated recovery key password does not match the provided recovery key password" : "Hasła klucza odzyskiwania nie zgadzają się",
-    "Recovery key successfully enabled" : "Klucz odzyskiwania włączony",
+    "Recovery key successfully enabled" : "Klucz odzyskiwania został pomyślnie włączony",
     "Could not enable recovery key. Please check your recovery key password!" : "Nie można włączyć klucza odzyskiwania. Proszę sprawdzić swoje hasło odzyskiwania!",
-    "Recovery key successfully disabled" : "Klucz odzyskiwania wyłączony",
+    "Recovery key successfully disabled" : "Klucz odzyskiwania został pomyślnie wyłączony",
     "Could not disable recovery key. Please check your recovery key password!" : "Nie można wyłączyć klucza odzyskiwania. Proszę sprawdzić swoje hasło odzyskiwania!",
     "Missing parameters" : "Brakujące dane",
     "Please provide the old recovery password" : "Podaj stare hasło odzyskiwania",

apps/encryption/l10n/pl.json

@@ -2,9 +2,9 @@
     "Missing recovery key password" : "Brakujące hasło klucza odzyskiwania",
     "Please repeat the recovery key password" : "Powtórz hasło klucza odzyskiwania",
     "Repeated recovery key password does not match the provided recovery key password" : "Hasła klucza odzyskiwania nie zgadzają się",
-    "Recovery key successfully enabled" : "Klucz odzyskiwania włączony",
+    "Recovery key successfully enabled" : "Klucz odzyskiwania został pomyślnie włączony",
     "Could not enable recovery key. Please check your recovery key password!" : "Nie można włączyć klucza odzyskiwania. Proszę sprawdzić swoje hasło odzyskiwania!",
-    "Recovery key successfully disabled" : "Klucz odzyskiwania wyłączony",
+    "Recovery key successfully disabled" : "Klucz odzyskiwania został pomyślnie wyłączony",
     "Could not disable recovery key. Please check your recovery key password!" : "Nie można wyłączyć klucza odzyskiwania. Proszę sprawdzić swoje hasło odzyskiwania!",
     "Missing parameters" : "Brakujące dane",
     "Please provide the old recovery password" : "Podaj stare hasło odzyskiwania",

apps/files_sharing/l10n/de_DE.js

@@ -183,6 +183,7 @@ OC.L10N.register(
     "Create a new share link" : "Neuen Freigabe-Link erstellen",
     "{shareWith} by {initiator}" : "{shareWith} von {initiator}",
     "Shared via link by {initiator}" : "Geteilt mittels Link von {initiator}",
+    "Mail share ({label})" : "Mail-Freigabe ({label})",
     "Share link ({label})" : "Link teilen ({label})",
     "Share link" : "Link teilen",
     "Error, please enter proper password and/or expiration date" : "Fehler. Bitte gebe das richtige Passwort und/oder Ablaufdatum ein",

apps/files_sharing/l10n/de_DE.json

@@ -181,6 +181,7 @@
     "Create a new share link" : "Neuen Freigabe-Link erstellen",
     "{shareWith} by {initiator}" : "{shareWith} von {initiator}",
     "Shared via link by {initiator}" : "Geteilt mittels Link von {initiator}",
+    "Mail share ({label})" : "Mail-Freigabe ({label})",
     "Share link ({label})" : "Link teilen ({label})",
     "Share link" : "Link teilen",
     "Error, please enter proper password and/or expiration date" : "Fehler. Bitte gebe das richtige Passwort und/oder Ablaufdatum ein",

apps/files_sharing/l10n/pl.js

@@ -183,6 +183,7 @@ OC.L10N.register(
     "Create a new share link" : "Utwórz nowy link udostępniania",
     "{shareWith} by {initiator}" : "{shareWith} przez {initiator}",
     "Shared via link by {initiator}" : "Udostępnione przez link od {initiator}",
+    "Mail share ({label})" : "Udostępnij pocztę ({label})",
     "Share link ({label})" : "Udostępnij link ({label})",
     "Share link" : "Udostępnij link",
     "Error, please enter proper password and/or expiration date" : "Błąd, wprowadź prawidłowe hasło i/lub datę ważności",

apps/files_sharing/l10n/pl.json

@@ -181,6 +181,7 @@
     "Create a new share link" : "Utwórz nowy link udostępniania",
     "{shareWith} by {initiator}" : "{shareWith} przez {initiator}",
     "Shared via link by {initiator}" : "Udostępnione przez link od {initiator}",
+    "Mail share ({label})" : "Udostępnij pocztę ({label})",
     "Share link ({label})" : "Udostępnij link ({label})",
     "Share link" : "Udostępnij link",
     "Error, please enter proper password and/or expiration date" : "Błąd, wprowadź prawidłowe hasło i/lub datę ważności",

apps/files_sharing/l10n/pt_BR.js

@@ -183,6 +183,7 @@ OC.L10N.register(
     "Create a new share link" : "Criar um novo link de compartilhamento",
     "{shareWith} by {initiator}" : "{shareWith} por {initiator}",
     "Shared via link by {initiator}" : "Compartilhado via link por {initiator}",
+    "Mail share ({label})" : "Compartilhar por e-mail ({label})",
     "Share link ({label})" : "Compartilhar link ({label})",
     "Share link" : "Link de compartilhamento",
     "Error, please enter proper password and/or expiration date" : "Erro, digite a senha correta e/ou a data de validade",

apps/files_sharing/l10n/pt_BR.json

@@ -181,6 +181,7 @@
     "Create a new share link" : "Criar um novo link de compartilhamento",
     "{shareWith} by {initiator}" : "{shareWith} por {initiator}",
     "Shared via link by {initiator}" : "Compartilhado via link por {initiator}",
+    "Mail share ({label})" : "Compartilhar por e-mail ({label})",
     "Share link ({label})" : "Compartilhar link ({label})",
     "Share link" : "Link de compartilhamento",
     "Error, please enter proper password and/or expiration date" : "Erro, digite a senha correta e/ou a data de validade",

apps/files_sharing/l10n/zh_CN.js

@@ -183,6 +183,7 @@ OC.L10N.register(
     "Create a new share link" : "创建新的共享链接",
     "{shareWith} by {initiator}" : "由 {initiator} 通过 {shareWith} 共享",
     "Shared via link by {initiator}" : "由 {initiator} 通过链接共享",
+    "Mail share ({label})" : "邮件分享 ({label})",
     "Share link ({label})" : "分享链接({标签})",
     "Share link" : "共享链接",
     "Error, please enter proper password and/or expiration date" : "错误，请输入正确的密码和/或过期日期",

apps/files_sharing/l10n/zh_CN.json

@@ -181,6 +181,7 @@
     "Create a new share link" : "创建新的共享链接",
     "{shareWith} by {initiator}" : "由 {initiator} 通过 {shareWith} 共享",
     "Shared via link by {initiator}" : "由 {initiator} 通过链接共享",
+    "Mail share ({label})" : "邮件分享 ({label})",
     "Share link ({label})" : "分享链接({标签})",
     "Share link" : "共享链接",
     "Error, please enter proper password and/or expiration date" : "错误，请输入正确的密码和/或过期日期",

apps/files_sharing/l10n/zh_TW.js

@@ -183,6 +183,7 @@ OC.L10N.register(
     "Create a new share link" : "建立新分享連結",
     "{shareWith} by {initiator}" : "{shareWith} 由 {initiator}",
     "Shared via link by {initiator}" : "由 {initiator} 透過連結分享",
+    "Mail share ({label})" : "郵件分享 ({label})",
     "Share link ({label})" : "分享連結 ({label})",
     "Share link" : "分享連結",
     "Error, please enter proper password and/or expiration date" : "錯誤，請輸入正確的密碼及／或到期日",

apps/files_sharing/l10n/zh_TW.json

@@ -181,6 +181,7 @@
     "Create a new share link" : "建立新分享連結",
     "{shareWith} by {initiator}" : "{shareWith} 由 {initiator}",
     "Shared via link by {initiator}" : "由 {initiator} 透過連結分享",
+    "Mail share ({label})" : "郵件分享 ({label})",
     "Share link ({label})" : "分享連結 ({label})",
     "Share link" : "分享連結",
     "Error, please enter proper password and/or expiration date" : "錯誤，請輸入正確的密碼及／或到期日",

apps/settings/l10n/de_DE.js

@@ -370,9 +370,11 @@ OC.L10N.register(
     "Expire after " : "Ablauf nach ",
     "days" : "Tagen",
     "Enforce expiration date" : "Ablaufdatum erzwingen",
+    "Allow users to share via link and emails" : "Benutzern erlauben, Inhalte über Links und E-Mail zu teilen.",
     "Allow public uploads" : "Öffentliches Hochladen erlauben",
     "Always ask for a password" : "Immer nach einem Passwort fragen",
     "Enforce password protection" : "Passwortschutz erzwingen",
+    "Set default expiration date" : "Standardmäßiges Ablaufdatum setzen",
     "Allow resharing" : "Weiterteilen erlauben",
     "Allow sharing with groups" : "Teilen mit Gruppen erlauben",
     "Restrict users to only share with users in their groups" : "Benutzer auf das Teilen innerhalb ihrer Gruppen beschränken",

apps/settings/l10n/de_DE.json

@@ -368,9 +368,11 @@
     "Expire after " : "Ablauf nach ",
     "days" : "Tagen",
     "Enforce expiration date" : "Ablaufdatum erzwingen",
+    "Allow users to share via link and emails" : "Benutzern erlauben, Inhalte über Links und E-Mail zu teilen.",
     "Allow public uploads" : "Öffentliches Hochladen erlauben",
     "Always ask for a password" : "Immer nach einem Passwort fragen",
     "Enforce password protection" : "Passwortschutz erzwingen",
+    "Set default expiration date" : "Standardmäßiges Ablaufdatum setzen",
     "Allow resharing" : "Weiterteilen erlauben",
     "Allow sharing with groups" : "Teilen mit Gruppen erlauben",
     "Restrict users to only share with users in their groups" : "Benutzer auf das Teilen innerhalb ihrer Gruppen beschränken",

apps/settings/l10n/pl.js

@@ -370,9 +370,11 @@ OC.L10N.register(
     "Expire after " : "Wygaś po ",
     "days" : "dniach",
     "Enforce expiration date" : "Wymuszaj datę wygaśnięcia",
+    "Allow users to share via link and emails" : "Zezwól użytkownikom na udostępnianie za pośrednictwem linków i e-maili",
     "Allow public uploads" : "Zezwalaj na publiczne wysyłanie",
     "Always ask for a password" : "Zawsze pytaj o hasło",
     "Enforce password protection" : "Wymuszaj zabezpieczenie hasłem",
+    "Set default expiration date" : "Ustaw domyślną datę wygaśnięcia",
     "Allow resharing" : "Zezwalaj na ponowne udostępnianie",
     "Allow sharing with groups" : "Zezwalaj na udostępnianie grupom",
     "Restrict users to only share with users in their groups" : "Ogranicz użytkownikom możliwość udostępniania, pozwól tylko w swoich grupach",

apps/settings/l10n/pl.json

@@ -368,9 +368,11 @@
     "Expire after " : "Wygaś po ",
     "days" : "dniach",
     "Enforce expiration date" : "Wymuszaj datę wygaśnięcia",
+    "Allow users to share via link and emails" : "Zezwól użytkownikom na udostępnianie za pośrednictwem linków i e-maili",
     "Allow public uploads" : "Zezwalaj na publiczne wysyłanie",
     "Always ask for a password" : "Zawsze pytaj o hasło",
     "Enforce password protection" : "Wymuszaj zabezpieczenie hasłem",
+    "Set default expiration date" : "Ustaw domyślną datę wygaśnięcia",
     "Allow resharing" : "Zezwalaj na ponowne udostępnianie",
     "Allow sharing with groups" : "Zezwalaj na udostępnianie grupom",
     "Restrict users to only share with users in their groups" : "Ogranicz użytkownikom możliwość udostępniania, pozwól tylko w swoich grupach",

apps/settings/l10n/pt_BR.js

@@ -370,9 +370,11 @@ OC.L10N.register(
     "Expire after " : "Expirar depois de",
     "days" : "dias",
     "Enforce expiration date" : "Fazer cumprir a data de expiração",
+    "Allow users to share via link and emails" : "Permitir que os usuários compartilhem via link e e-mails",
     "Allow public uploads" : "Permitir envio público",
     "Always ask for a password" : "Sempre pedir a senha",
     "Enforce password protection" : "Reforce a proteção por senha",
+    "Set default expiration date" : "Definir data de expiração padrão",
     "Allow resharing" : "Permitir o recompartilhamento",
     "Allow sharing with groups" : "Permitir o compartilhamento com grupos",
     "Restrict users to only share with users in their groups" : "Restringir os usuários a compartilhar somente com os usuários em seus grupos",

apps/settings/l10n/pt_BR.json

@@ -368,9 +368,11 @@
     "Expire after " : "Expirar depois de",
     "days" : "dias",
     "Enforce expiration date" : "Fazer cumprir a data de expiração",
+    "Allow users to share via link and emails" : "Permitir que os usuários compartilhem via link e e-mails",
     "Allow public uploads" : "Permitir envio público",
     "Always ask for a password" : "Sempre pedir a senha",
     "Enforce password protection" : "Reforce a proteção por senha",
+    "Set default expiration date" : "Definir data de expiração padrão",
     "Allow resharing" : "Permitir o recompartilhamento",
     "Allow sharing with groups" : "Permitir o compartilhamento com grupos",
     "Restrict users to only share with users in their groups" : "Restringir os usuários a compartilhar somente com os usuários em seus grupos",

apps/settings/l10n/zh_CN.js

@@ -370,9 +370,11 @@ OC.L10N.register(
     "Expire after " : "过期于",
     "days" : "天",
     "Enforce expiration date" : "强制过期日期",
+    "Allow users to share via link and emails" : "允许用户通过链接和电子邮件分享 ",
     "Allow public uploads" : "允许公开上传",
     "Always ask for a password" : "一直要求输入密码",
     "Enforce password protection" : "强制密码保护",
+    "Set default expiration date" : "设置默认到期日",
     "Allow resharing" : "允许二次共享",
     "Allow sharing with groups" : "允许群组共享",
     "Restrict users to only share with users in their groups" : "限制用户只与他们组中的用户共享",

apps/settings/l10n/zh_CN.json

@@ -368,9 +368,11 @@
     "Expire after " : "过期于",
     "days" : "天",
     "Enforce expiration date" : "强制过期日期",
+    "Allow users to share via link and emails" : "允许用户通过链接和电子邮件分享 ",
     "Allow public uploads" : "允许公开上传",
     "Always ask for a password" : "一直要求输入密码",
     "Enforce password protection" : "强制密码保护",
+    "Set default expiration date" : "设置默认到期日",
     "Allow resharing" : "允许二次共享",
     "Allow sharing with groups" : "允许群组共享",
     "Restrict users to only share with users in their groups" : "限制用户只与他们组中的用户共享",

apps/sharebymail/l10n/de_DE.js

@@ -24,6 +24,7 @@ OC.L10N.register(
     "Password to access {file} was sent to {email}" : "Passwort für den Zugriff auf {file} wurde an {email} versandt ",
     "Password to access %1$s was sent to you" : "Passwort für den Zugriff auf %1$s wurde an Sie versandt",
     "Password to access {file} was sent to you" : " Passwort für den Zugriff auf {file} wurde an Sie versandt ",
+    "Sharing %1$s failed, because this item is already shared with user %2$s" : "Freigabe von %1$s fehlgeschlagen, da dieses Element schon mit dem Benutzer %2$s geteilt wird.",
     "We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "Automatisch erzeugtes Passwort kann nicht versandt werden. Bitte geben Sie in Ihren persönlichen Einstellungen eine gültige E-Mail-Adresse ein und versuche Sie es erneut.",
     "Failed to send share by email" : "Fehler beim Senden der Freigabe per E-Mail",
     "%1$s shared »%2$s« with you" : "%1$s hat »%2$s« mit Ihnen geteilt",

apps/sharebymail/l10n/de_DE.json

@@ -22,6 +22,7 @@
     "Password to access {file} was sent to {email}" : "Passwort für den Zugriff auf {file} wurde an {email} versandt ",
     "Password to access %1$s was sent to you" : "Passwort für den Zugriff auf %1$s wurde an Sie versandt",
     "Password to access {file} was sent to you" : " Passwort für den Zugriff auf {file} wurde an Sie versandt ",
+    "Sharing %1$s failed, because this item is already shared with user %2$s" : "Freigabe von %1$s fehlgeschlagen, da dieses Element schon mit dem Benutzer %2$s geteilt wird.",
     "We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "Automatisch erzeugtes Passwort kann nicht versandt werden. Bitte geben Sie in Ihren persönlichen Einstellungen eine gültige E-Mail-Adresse ein und versuche Sie es erneut.",
     "Failed to send share by email" : "Fehler beim Senden der Freigabe per E-Mail",
     "%1$s shared »%2$s« with you" : "%1$s hat »%2$s« mit Ihnen geteilt",

apps/sharebymail/l10n/pl.js

@@ -24,6 +24,7 @@ OC.L10N.register(
     "Password to access {file} was sent to {email}" : "Hasło dostępu do {file} zostało wysłane do {email}",
     "Password to access %1$s was sent to you" : "Hasło dostępu do %1$s zostało do Ciebie wysłane",
     "Password to access {file} was sent to you" : "Hasło dostępu do {file} zostało do Ciebie wysłane",
+    "Sharing %1$s failed, because this item is already shared with user %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już udostępniony użytkownikowi %2$s",
     "We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "Nie można wysłać automatycznie wygenerowanego hasła. Proszę ustawić prawidłowy adres e-mail w ustawieniach osobistych i spróbować ponownie.",
     "Failed to send share by email" : "Nie udało się wysłać linku udostępnienia e-mailem",
     "%1$s shared »%2$s« with you" : "%1$s udostępnił »%2$s«",

apps/sharebymail/l10n/pl.json

@@ -22,6 +22,7 @@
     "Password to access {file} was sent to {email}" : "Hasło dostępu do {file} zostało wysłane do {email}",
     "Password to access %1$s was sent to you" : "Hasło dostępu do %1$s zostało do Ciebie wysłane",
     "Password to access {file} was sent to you" : "Hasło dostępu do {file} zostało do Ciebie wysłane",
+    "Sharing %1$s failed, because this item is already shared with user %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już udostępniony użytkownikowi %2$s",
     "We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "Nie można wysłać automatycznie wygenerowanego hasła. Proszę ustawić prawidłowy adres e-mail w ustawieniach osobistych i spróbować ponownie.",
     "Failed to send share by email" : "Nie udało się wysłać linku udostępnienia e-mailem",
     "%1$s shared »%2$s« with you" : "%1$s udostępnił »%2$s«",

apps/sharebymail/l10n/pt_BR.js

@@ -24,6 +24,7 @@ OC.L10N.register(
     "Password to access {file} was sent to {email}" : "A senha para acesso {file} foi enviada para {email}",
     "Password to access %1$s was sent to you" : "A senha para acesso  %1$s foi enviada para você",
     "Password to access {file} was sent to you" : "A senha para acesso {file} foi enviada para você",
+    "Sharing %1$s failed, because this item is already shared with user %2$s" : "Compartilhamento de %1$s falhou,  porque este item já está compartilhado com o usuário%2$s",
     "We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "Não pudemos enviar a você a senha auto-gerada. Defina um e-mail válido em sua configuração e tente novamente.",
     "Failed to send share by email" : "Falha ao enviar compartilhamento via e-mail",
     "%1$s shared »%2$s« with you" : "%1$s compartilhou »%2$s« com você",

apps/sharebymail/l10n/pt_BR.json

@@ -22,6 +22,7 @@
     "Password to access {file} was sent to {email}" : "A senha para acesso {file} foi enviada para {email}",
     "Password to access %1$s was sent to you" : "A senha para acesso  %1$s foi enviada para você",
     "Password to access {file} was sent to you" : "A senha para acesso {file} foi enviada para você",
+    "Sharing %1$s failed, because this item is already shared with user %2$s" : "Compartilhamento de %1$s falhou,  porque este item já está compartilhado com o usuário%2$s",
     "We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "Não pudemos enviar a você a senha auto-gerada. Defina um e-mail válido em sua configuração e tente novamente.",
     "Failed to send share by email" : "Falha ao enviar compartilhamento via e-mail",
     "%1$s shared »%2$s« with you" : "%1$s compartilhou »%2$s« com você",

apps/sharebymail/l10n/zh_CN.js

@@ -24,6 +24,7 @@ OC.L10N.register(
     "Password to access {file} was sent to {email}" : "访问 {file} 的密码被发送给 {email}",
     "Password to access %1$s was sent to you" : "访问 %1$s 的密码已发送给您",
     "Password to access {file} was sent to you" : "访问 {file} 的密码已发送给您",
+    "Sharing %1$s failed, because this item is already shared with user %2$s" : "分享 %1$s 失败，因为这个项目已经和用户 %2$s 进行了共享。",
     "We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "我们无法将自动生成的密码发送与您。请在您的个人设置中提供有效的邮箱后重试。",
     "Failed to send share by email" : "通过邮件发送共享失败",
     "%1$s shared »%2$s« with you" : "%1$s 对您共享了 »%2$s«",

apps/sharebymail/l10n/zh_CN.json

@@ -22,6 +22,7 @@
     "Password to access {file} was sent to {email}" : "访问 {file} 的密码被发送给 {email}",
     "Password to access %1$s was sent to you" : "访问 %1$s 的密码已发送给您",
     "Password to access {file} was sent to you" : "访问 {file} 的密码已发送给您",
+    "Sharing %1$s failed, because this item is already shared with user %2$s" : "分享 %1$s 失败，因为这个项目已经和用户 %2$s 进行了共享。",
     "We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "我们无法将自动生成的密码发送与您。请在您的个人设置中提供有效的邮箱后重试。",
     "Failed to send share by email" : "通过邮件发送共享失败",
     "%1$s shared »%2$s« with you" : "%1$s 对您共享了 »%2$s«",

apps/user_ldap/l10n/pl.js

@@ -36,7 +36,7 @@ OC.L10N.register(
     "An error occurred. Please check the Base DN, as well as connection settings and credentials." : "Wystąpił błąd. Proszę sprawdzić Base DN oraz ustawienia połączenia i dane dostępowe.",
     "Do you really want to delete the current Server Configuration?" : "Czy chcesz usunąć bieżącą konfigurację serwera?",
     "Confirm Deletion" : "Potwierdź usunięcie",
-    "Mappings cleared successfully!" : "Mapowanie wyczyszczone!",
+    "Mappings cleared successfully!" : "Mapowania zostały pomyślnie wyczyszczone!",
     "Error while clearing the mappings." : "Błąd podczas czyszczenia mapowania.",
     "Anonymous bind is not allowed. Please provide a User DN and Password." : "Anonimowe połączenie nie jest dozwolone. Proszę podać DN użytkownika i hasło.",
     "LDAP Operations error. Anonymous bind might not be allowed." : "Błąd operacji LDAP. Anonimowe połączenie nie jest dozwolone.",

apps/user_ldap/l10n/pl.json

@@ -34,7 +34,7 @@
     "An error occurred. Please check the Base DN, as well as connection settings and credentials." : "Wystąpił błąd. Proszę sprawdzić Base DN oraz ustawienia połączenia i dane dostępowe.",
     "Do you really want to delete the current Server Configuration?" : "Czy chcesz usunąć bieżącą konfigurację serwera?",
     "Confirm Deletion" : "Potwierdź usunięcie",
-    "Mappings cleared successfully!" : "Mapowanie wyczyszczone!",
+    "Mappings cleared successfully!" : "Mapowania zostały pomyślnie wyczyszczone!",
     "Error while clearing the mappings." : "Błąd podczas czyszczenia mapowania.",
     "Anonymous bind is not allowed. Please provide a User DN and Password." : "Anonimowe połączenie nie jest dozwolone. Proszę podać DN użytkownika i hasło.",
     "LDAP Operations error. Anonymous bind might not be allowed." : "Błąd operacji LDAP. Anonimowe połączenie nie jest dozwolone.",

core/l10n/de_DE.js

@@ -126,6 +126,8 @@ OC.L10N.register(
     "Please reload the page." : "Bitte die Seite neu laden.",
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "Das Update war nicht erfolgreich. Für mehr Informationen <a href=\"{url}\">lesen Sie unseren Forenbeitrag</a> zu diesem Thema.",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "Das Update ist fehlgeschlagen. Bitte melden Sie dieses Problem an die <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud Community</a>.",
+    "Continue to {productName}" : "Weiter zu {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["Die Aktualisierung war erfolgreich. Sie werden in %n Sekunde zu {productName} weitergeleitet.","Die Aktualisierung war erfolgreich. Sie werden in %n Sekunden zu {productName} weitergeleitet."],
     "Log in" : "Anmelden",
     "Logging in …" : "Melde an…",
     "Server side authentication failed!" : "Serverseitige Authentifizierung fehlgeschlagen!",

core/l10n/de_DE.json

@@ -124,6 +124,8 @@
     "Please reload the page." : "Bitte die Seite neu laden.",
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "Das Update war nicht erfolgreich. Für mehr Informationen <a href=\"{url}\">lesen Sie unseren Forenbeitrag</a> zu diesem Thema.",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "Das Update ist fehlgeschlagen. Bitte melden Sie dieses Problem an die <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud Community</a>.",
+    "Continue to {productName}" : "Weiter zu {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["Die Aktualisierung war erfolgreich. Sie werden in %n Sekunde zu {productName} weitergeleitet.","Die Aktualisierung war erfolgreich. Sie werden in %n Sekunden zu {productName} weitergeleitet."],
     "Log in" : "Anmelden",
     "Logging in …" : "Melde an…",
     "Server side authentication failed!" : "Serverseitige Authentifizierung fehlgeschlagen!",

core/l10n/pl.js

@@ -126,6 +126,8 @@ OC.L10N.register(
     "Please reload the page." : "Przeładuj stronę.",
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "Aktualizacja nie powiodła się. Aby uzyskać więcej informacji, <a href=\"{url}\">zapoznaj się z naszym postem na forum</a> dotyczącym tego problemu.",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "Aktualizacja nie powiodła się. Zgłoś ten problem do <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">społeczności Nextcloud</a>.",
+    "Continue to {productName}" : "Przejdź do {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do {productName} za %n sekundę.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do {productName} za %n sekundy.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do {productName} za %n sekund.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do {productName} za %n sekund."],
     "Log in" : "Zaloguj",
     "Logging in …" : "Logowanie…",
     "Server side authentication failed!" : "Uwierzytelnianie po stronie serwera nie powiodło się!",
@@ -389,7 +391,7 @@ OC.L10N.register(
     "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the <a href=\"{docUrl}\" rel=\"noreferrer noopener\">security tips ↗</a>." : "Nagłówek HTTP \"Strict-Transport-Security\" nie jest ustawiony na co najmniej \"{seconds}\" sekund. W celu zwiększenia bezpieczeństwa zaleca się włączenie HSTS w sposób opisany w <a href=\"{docUrl}\" rel=\"noreferrer noopener\">poradach bezpieczeństwa ↗</a>.",
     "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the <a href=\"{docUrl}\">security tips ↗</a>." : "Dostęp do tej strony jest za pośrednictwem protokołu HTTP. Zaleca się skonfigurowanie serwera tak, aby wymagał HTTPS, zgodnie z opisem w <a href=\"{docUrl}\">poradach bezpieczeństwa ↗</a>.",
     "Continue to Nextcloud" : "Przejdź do Nextcloud",
-    "_The update was successful. Redirecting you to Nextcloud in %n second._::_The update was successful. Redirecting you to Nextcloud in %n seconds._" : ["Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud w %n sekundę.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud w %n sekundy.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud w %n sekund.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud w %n sekundy."],
+    "_The update was successful. Redirecting you to Nextcloud in %n second._::_The update was successful. Redirecting you to Nextcloud in %n seconds._" : ["Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud za %n sekundę.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud za %n sekundy.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud za %n sekund.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud za %n sekundy."],
     "Searching other places" : "Przeszukaj inne miejsca",
     "No search results in other folders for {tag}{filter}{endtag}" : "Brak wyników wyszukiwania w innych katalogach dla {tag}{filter}{endtag}",
     "_{count} search result in another folder_::_{count} search results in other folders_" : ["{count} wynik wyszukiwania w innych katalogach","{count} wyniki wyszukiwania w innych katalogach","{count} wyników wyszukiwania w innych katalogach","{count} wyników wyszukiwania w innych katalogach"],

core/l10n/pl.json

@@ -124,6 +124,8 @@
     "Please reload the page." : "Przeładuj stronę.",
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "Aktualizacja nie powiodła się. Aby uzyskać więcej informacji, <a href=\"{url}\">zapoznaj się z naszym postem na forum</a> dotyczącym tego problemu.",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "Aktualizacja nie powiodła się. Zgłoś ten problem do <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">społeczności Nextcloud</a>.",
+    "Continue to {productName}" : "Przejdź do {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do {productName} za %n sekundę.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do {productName} za %n sekundy.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do {productName} za %n sekund.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do {productName} za %n sekund."],
     "Log in" : "Zaloguj",
     "Logging in …" : "Logowanie…",
     "Server side authentication failed!" : "Uwierzytelnianie po stronie serwera nie powiodło się!",
@@ -387,7 +389,7 @@
     "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the <a href=\"{docUrl}\" rel=\"noreferrer noopener\">security tips ↗</a>." : "Nagłówek HTTP \"Strict-Transport-Security\" nie jest ustawiony na co najmniej \"{seconds}\" sekund. W celu zwiększenia bezpieczeństwa zaleca się włączenie HSTS w sposób opisany w <a href=\"{docUrl}\" rel=\"noreferrer noopener\">poradach bezpieczeństwa ↗</a>.",
     "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the <a href=\"{docUrl}\">security tips ↗</a>." : "Dostęp do tej strony jest za pośrednictwem protokołu HTTP. Zaleca się skonfigurowanie serwera tak, aby wymagał HTTPS, zgodnie z opisem w <a href=\"{docUrl}\">poradach bezpieczeństwa ↗</a>.",
     "Continue to Nextcloud" : "Przejdź do Nextcloud",
-    "_The update was successful. Redirecting you to Nextcloud in %n second._::_The update was successful. Redirecting you to Nextcloud in %n seconds._" : ["Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud w %n sekundę.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud w %n sekundy.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud w %n sekund.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud w %n sekundy."],
+    "_The update was successful. Redirecting you to Nextcloud in %n second._::_The update was successful. Redirecting you to Nextcloud in %n seconds._" : ["Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud za %n sekundę.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud za %n sekundy.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud za %n sekund.","Aktualizacja przebiegła pomyślnie. Przekieruję Ciebie do Nextcloud za %n sekundy."],
     "Searching other places" : "Przeszukaj inne miejsca",
     "No search results in other folders for {tag}{filter}{endtag}" : "Brak wyników wyszukiwania w innych katalogach dla {tag}{filter}{endtag}",
     "_{count} search result in another folder_::_{count} search results in other folders_" : ["{count} wynik wyszukiwania w innych katalogach","{count} wyniki wyszukiwania w innych katalogach","{count} wyników wyszukiwania w innych katalogach","{count} wyników wyszukiwania w innych katalogach"],

core/l10n/pt_BR.js

@@ -80,10 +80,10 @@ OC.L10N.register(
     "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Você está executando o PHP {version}. Atualize sua versão do PHP para aproveitar as vantagens de {linkstart}desempenho e atualizações de segurança fornecidas pelo Grupo PHP ↗{linkend} assim que sua distribuição oferecer suporte.",
     "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 é a última versão compatível com PHP 7.2. Nextcloud 21 requer ao menos PHP 7.3.",
     "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "A configuração do cabeçalho do proxy reverso está incorreta ou você está acessando o Nextcloud de um proxy confiável. Caso contrário, este é um problema de segurança e pode permitir que um invasor falsifique seu endereço IP como visível para o Nextcloud. Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}. ",
-    "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached está configurado como cache distribuído, mas o módulo PHP incorreto \"memcache\" está instalado. \\OC\\Memcache\\Memcached suporta apenas \"memcached\" e não \"memcache\". . Veja o {linkstart}memcached wiki sobre ambos os módulos  ↗{linkend}.",
+    "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached está configurado como cache distribuído, mas a extensão PHP incorreta \"memcache\" está instalada. \\OC\\Memcache\\Memcached suporta apenas \"memcached\" e não \"memcache\". Veja o {linkstart}memcached wiki sobre ambas as extensões ↗{linkend}.",
-    "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Alguns arquivos não passaram na verificação de integridade. Mais informações sobre como resolver esse problema podem ser encontradas na  {linkstart1}documentação ↗{linkend}. ({linkstart2}Lista de arquivos inválidos…{linkend} / {linkstart3}Rescan…{linkend})",
+    "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Alguns arquivos não passaram na verificação de integridade. Mais informações sobre como resolver esse problema podem ser encontradas na  {linkstart1}documentação ↗{linkend}. ({linkstart2}Lista de arquivos inválidos…{linkend} / {linkstart3}Verificar novamente…{linkend})",
-    "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "O módulo PHP OPcache não está carregado. {linkstart}Para melhor desempenho, é recomendado ↗{linkado} carregá-lo na instalação do PHP. ",
+    "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "A extensão PHP OPcache não está carregada. {linkstart}Para melhor desempenho, é recomendado ↗{linkado} carregá-la na instalação do PHP.",
-    "The PHP OPcache module is not properly configured. {linkstart}For better performance it is recommended ↗{linkend} to use the following settings in the <code>php.ini</code>:" : "O módulo PHP OPcache não está configurado corretamente.{linkstart}Para melhor desempenho é recomendado↗{linkend}  \nusar as seguintes configurações no <code>php.ini</code>:",
+    "The PHP OPcache module is not properly configured. {linkstart}For better performance it is recommended ↗{linkend} to use the following settings in the <code>php.ini</code>:" : "A extensão PHP OPcache não está configurada corretamente. {linkstart}Para melhor desempenho é recomendado↗{linkend} usar as seguintes configurações no <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "A função PHP \"set_time_limit\" não está disponível. Isso pode resultar em travamento de scripts, quebrando sua instalação. A ativação desta função é altamente recomendada.",
     "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "Seu PHP não possui suporte à FreeType, resultando em problemas nas fotos de perfil e interface de configurações.",
     "Missing index \"{indexName}\" in table \"{tableName}\"." : "Falta o índice \"{indexName}\" na tabela \"{tableName}\".",
@@ -93,25 +93,25 @@ OC.L10N.register(
     "Missing optional column \"{columnName}\" in table \"{tableName}\"." : "Falta a coluna opcional \"{columnName}\" na tabela \"{tableName}\".",
     "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "Estão faltando algumas colunas opcionais no banco de dados. Devido ao fato de que adicionar colunas em grandes tabelas pode levar algum tempo, elas não foram adicionadas automaticamente por serem opcionais. Ao executar \"occ db: add-missing-columns\", elas podem ser adicionadas manualmente enquanto a instância continua em execução. Depois que as colunas são adicionadas, alguns recursos podem melhorar a capacidade de resposta ou a usabilidade.",
     "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Nesta instalação estão faltando alguns módulos PHP recomendados. Para melhor desempenho e compatibilidade, é altamente recomendável instalá-los.",
-    "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "O módulo php-imagick nesta instância não tem suporte para SVG. Para melhor compatibilidade é recomendado instalá-lo.",
+    "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "A extensão php-imagick nesta instância não tem suporte para SVG. Para melhor compatibilidade é recomendado instalá-la.",
-    "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Algumas colunas do banco de dados estão sem uma conversão para big int. Devido ao fato de que alterar os tipos de coluna em tabelas grandes pode levar algum tempo, elas não foram alteradas automaticamente. Executando 'occ db: convert-filecache-bigint' essas alterações pendentes podem ser aplicadas manualmente. Esta operação precisa ser feita enquanto a instância está offline. Para obter mais detalhes, leia {linkstart} a página de documentação sobre isso  ↗{linkend}.",
+    "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Algumas colunas do banco de dados estão sem uma conversão para big int. Devido ao fato de que alterar os tipos de coluna em tabelas grandes pode levar algum tempo, elas não foram alteradas automaticamente. Executando 'occ db: convert-filecache-bigint' essas alterações pendentes podem ser aplicadas manualmente. Esta operação precisa ser feita enquanto a instância está offline. Para obter mais detalhes, leia {linkstart} a página de documentação sobre isso ↗{linkend}.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Atualmente, o SQLite está sendo usado como plataforma de banco de dados. Para instalações maiores, recomendamos que migre para outra.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Isso é recomendado ao usar o cliente da área de trabalho para sincronização de arquivos.",
     "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Para migrar para outro banco de dados, use a ferramenta de linha de comando: 'occ db:convert-type', ou consulte a  {linkstart}documentação do ↗{linkend}. ",
     "The PHP memory limit is below the recommended value of 512MB." : "O limite de memória do PHP está abaixo do valor recomendado de 512MB.",
     "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Alguns diretórios de aplicativos são de propriedade de um usuário diferente do servidor da web. Esse pode ser o caso se os aplicativos tiverem sido instalados manualmente. Verifique as permissões dos seguintes diretórios de aplicativos:",
-    "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL é usado como banco de dados, mas não oferece suporte a caracteres de 4 bytes. Para ser capaz de lidar com caracteres de 4 bytes (como emojis) sem problemas em nomes de arquivos ou comentários, por exemplo, é recomendado habilitar o suporte de 4 bytes no MySQL . Para mais detalhes, leia  {linkstart}a página de documentação sobre isso  ↗{linkend}.",
+    "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL é usado como banco de dados, mas não oferece suporte a caracteres de 4 bytes. Para ser capaz de lidar com caracteres de 4 bytes (como emojis) sem problemas em nomes de arquivos ou comentários, por exemplo, é recomendado habilitar o suporte de 4 bytes no MySQL. Para mais detalhes, leia {linkstart}a página de documentação sobre isso ↗{linkend}.",
     "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Este Nextcloud usa um armazenamento de objeto baseado no S3 como armazenamento primário. Os arquivos enviados são armazenados temporariamente no servidor e portanto é recomendado ter 50 GB de espaço livre disponível no diretório temp do PHP. Verifique os logs para obter detalhes completos sobre o caminho e o espaço disponível. Para melhorar isso, altere o diretório temporário no arquivo php.ini ou disponibilize mais espaço nesse caminho.",
-    "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Você está acessando sua instância por meio de uma conexão segura, mas sua instância está gerando URLs inseguros. Isso provavelmente significa que você está atrás de um proxy reverso e as variáveis de configuração de substituição não estão definidas corretamente . Por favor leia  {linkstart}a página de documentação sobre isso  ↗{linkend}.",
+    "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Você está acessando sua instância por meio de uma conexão segura, mas sua instância está gerando URLs inseguros. Isso provavelmente significa que você está atrás de um proxy reverso e as variáveis de configuração de substituição não estão definidas corretamente. Por favor leia {linkstart}a página de documentação sobre isso ↗{linkend}.",
     "Error occurred while checking server setup" : "Erro ao verificar a configuração do servidor",
-    "For more details see the {linkstart}documentation ↗{linkend}." : "Para obter mais detalhes, consulte a {linkstart}documentação  ↗{linkend}.",
+    "For more details see the {linkstart}documentation ↗{linkend}." : "Para obter mais detalhes, consulte a {linkstart}documentação ↗{linkend}.",
     "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Seu diretório de dados e arquivos provavelmente podem ser acessados pela Internet. O arquivo .htaccess não está funcionando. É altamente recomendado que você configure seu servidor web para que o diretório de dados não seja mais acessível ou mova o diretório de dados fora da raiz de documentos do servidor web.",
     "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não está definido para \"{expected}\". Este é um potencial risco de segurança ou privacidade e é recomendado ajustar esta configuração de acordo.",
     "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não está definido para \"{expected}\". Alguns recursos podem não funcionar corretamente e é recomendado ajustar esta configuração de acordo.",
     "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não contém \"{expected}\". Esse é um risco potencial de segurança ou privacidade. É recomendável ajustar essa configuração de acordo.",
-    "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "O \"{header}\" O cabeçalho HTTP não está definido para  \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" ou \"{val5}\". Isso pode vazar informações do referenciador. Veja {linkstart}Recomendações W3C  ↗{linkend}.",
+    "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "O cabeçalho HTTP \"{header}\" não está definido para \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" ou \"{val5}\". Isso pode vazar informações de referer. Veja {linkstart}Recomendações W3C ↗{linkend}.",
-    "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "O \"Strict-Transport-Security\" O cabeçalho HTTP não está definido para pelo menos  \"{seconds}\" seguntos. Para maior segurança, é recomendável habilitar o HSTS conforme descrito nas  {linkstart}dicas de segurança ↗{linkend}.",
+    "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "O cabeçalho HTTP \"Strict-Transport-Security\" não está definido para pelo menos \"{seconds}\" seguntos. Para maior segurança, é recomendável habilitar o HSTS conforme descrito nas {linkstart}dicas de segurança ↗{linkend}.",
-    "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Acessando o site de forma insegura via HTTP. É altamente recomendável configurar seu servidor para exigir HTTPS, conforme descrito nas {linkstart}dicas de segurança  ↗{linkend}. ",
+    "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Acessando o site de forma insegura via HTTP. É altamente recomendável configurar seu servidor para exigir HTTPS, conforme descrito nas {linkstart}dicas de segurança ↗{linkend}.",
     "unknown text" : "texto desconhecido",
     "Hello world!" : "Olá mundo!",
     "sunny" : "ensolarado",
@@ -126,6 +126,8 @@ OC.L10N.register(
     "Please reload the page." : "Por favor recarregue a página",
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "A atualização não foi realizada com sucesso. Para mais informações <a href=\"{url}\">verifique nosso post no fórum</a> que abrange esta questão.",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "A atualização não foi realizada com sucesso. Por favor, informe este problema para  a <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">comunidade Nextcloud</a>.",
+    "Continue to {productName}" : "Continuar para {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["A atualização foi bem-sucedida. Redirecionando você à {productName} em %n segundo.","A atualização foi bem-sucedida. Redirecionando você para {productName} em %n segundos."],
     "Log in" : "Entrar",
     "Logging in …" : "Entrando...",
     "Server side authentication failed!" : "Autenticação do servidor falhou!",

core/l10n/pt_BR.json

@@ -78,10 +78,10 @@
     "You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "Você está executando o PHP {version}. Atualize sua versão do PHP para aproveitar as vantagens de {linkstart}desempenho e atualizações de segurança fornecidas pelo Grupo PHP ↗{linkend} assim que sua distribuição oferecer suporte.",
     "Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20 é a última versão compatível com PHP 7.2. Nextcloud 21 requer ao menos PHP 7.3.",
     "The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "A configuração do cabeçalho do proxy reverso está incorreta ou você está acessando o Nextcloud de um proxy confiável. Caso contrário, este é um problema de segurança e pode permitir que um invasor falsifique seu endereço IP como visível para o Nextcloud. Mais informações podem ser encontradas na {linkstart}documentação ↗{linkend}. ",
-    "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached está configurado como cache distribuído, mas o módulo PHP incorreto \"memcache\" está instalado. \\OC\\Memcache\\Memcached suporta apenas \"memcached\" e não \"memcache\". . Veja o {linkstart}memcached wiki sobre ambos os módulos  ↗{linkend}.",
+    "Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached está configurado como cache distribuído, mas a extensão PHP incorreta \"memcache\" está instalada. \\OC\\Memcache\\Memcached suporta apenas \"memcached\" e não \"memcache\". Veja o {linkstart}memcached wiki sobre ambas as extensões ↗{linkend}.",
-    "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Alguns arquivos não passaram na verificação de integridade. Mais informações sobre como resolver esse problema podem ser encontradas na  {linkstart1}documentação ↗{linkend}. ({linkstart2}Lista de arquivos inválidos…{linkend} / {linkstart3}Rescan…{linkend})",
+    "Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "Alguns arquivos não passaram na verificação de integridade. Mais informações sobre como resolver esse problema podem ser encontradas na  {linkstart1}documentação ↗{linkend}. ({linkstart2}Lista de arquivos inválidos…{linkend} / {linkstart3}Verificar novamente…{linkend})",
-    "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "O módulo PHP OPcache não está carregado. {linkstart}Para melhor desempenho, é recomendado ↗{linkado} carregá-lo na instalação do PHP. ",
+    "The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "A extensão PHP OPcache não está carregada. {linkstart}Para melhor desempenho, é recomendado ↗{linkado} carregá-la na instalação do PHP.",
-    "The PHP OPcache module is not properly configured. {linkstart}For better performance it is recommended ↗{linkend} to use the following settings in the <code>php.ini</code>:" : "O módulo PHP OPcache não está configurado corretamente.{linkstart}Para melhor desempenho é recomendado↗{linkend}  \nusar as seguintes configurações no <code>php.ini</code>:",
+    "The PHP OPcache module is not properly configured. {linkstart}For better performance it is recommended ↗{linkend} to use the following settings in the <code>php.ini</code>:" : "A extensão PHP OPcache não está configurada corretamente. {linkstart}Para melhor desempenho é recomendado↗{linkend} usar as seguintes configurações no <code>php.ini</code>:",
     "The PHP function \"set_time_limit\" is not available. This could result in scripts being halted mid-execution, breaking your installation. Enabling this function is strongly recommended." : "A função PHP \"set_time_limit\" não está disponível. Isso pode resultar em travamento de scripts, quebrando sua instalação. A ativação desta função é altamente recomendada.",
     "Your PHP does not have FreeType support, resulting in breakage of profile pictures and the settings interface." : "Seu PHP não possui suporte à FreeType, resultando em problemas nas fotos de perfil e interface de configurações.",
     "Missing index \"{indexName}\" in table \"{tableName}\"." : "Falta o índice \"{indexName}\" na tabela \"{tableName}\".",
@@ -91,25 +91,25 @@
     "Missing optional column \"{columnName}\" in table \"{tableName}\"." : "Falta a coluna opcional \"{columnName}\" na tabela \"{tableName}\".",
     "The database is missing some optional columns. Due to the fact that adding columns on big tables could take some time they were not added automatically when they can be optional. By running \"occ db:add-missing-columns\" those missing columns could be added manually while the instance keeps running. Once the columns are added some features might improve responsiveness or usability." : "Estão faltando algumas colunas opcionais no banco de dados. Devido ao fato de que adicionar colunas em grandes tabelas pode levar algum tempo, elas não foram adicionadas automaticamente por serem opcionais. Ao executar \"occ db: add-missing-columns\", elas podem ser adicionadas manualmente enquanto a instância continua em execução. Depois que as colunas são adicionadas, alguns recursos podem melhorar a capacidade de resposta ou a usabilidade.",
     "This instance is missing some recommended PHP modules. For improved performance and better compatibility it is highly recommended to install them." : "Nesta instalação estão faltando alguns módulos PHP recomendados. Para melhor desempenho e compatibilidade, é altamente recomendável instalá-los.",
-    "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "O módulo php-imagick nesta instância não tem suporte para SVG. Para melhor compatibilidade é recomendado instalá-lo.",
+    "Module php-imagick in this instance has no SVG support. For better compatibility it is recommended to install it." : "A extensão php-imagick nesta instância não tem suporte para SVG. Para melhor compatibilidade é recomendado instalá-la.",
-    "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Algumas colunas do banco de dados estão sem uma conversão para big int. Devido ao fato de que alterar os tipos de coluna em tabelas grandes pode levar algum tempo, elas não foram alteradas automaticamente. Executando 'occ db: convert-filecache-bigint' essas alterações pendentes podem ser aplicadas manualmente. Esta operação precisa ser feita enquanto a instância está offline. Para obter mais detalhes, leia {linkstart} a página de documentação sobre isso  ↗{linkend}.",
+    "Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read {linkstart}the documentation page about this ↗{linkend}." : "Algumas colunas do banco de dados estão sem uma conversão para big int. Devido ao fato de que alterar os tipos de coluna em tabelas grandes pode levar algum tempo, elas não foram alteradas automaticamente. Executando 'occ db: convert-filecache-bigint' essas alterações pendentes podem ser aplicadas manualmente. Esta operação precisa ser feita enquanto a instância está offline. Para obter mais detalhes, leia {linkstart} a página de documentação sobre isso ↗{linkend}.",
     "SQLite is currently being used as the backend database. For larger installations we recommend that you switch to a different database backend." : "Atualmente, o SQLite está sendo usado como plataforma de banco de dados. Para instalações maiores, recomendamos que migre para outra.",
     "This is particularly recommended when using the desktop client for file synchronisation." : "Isso é recomendado ao usar o cliente da área de trabalho para sincronização de arquivos.",
     "To migrate to another database use the command line tool: 'occ db:convert-type', or see the {linkstart}documentation ↗{linkend}." : "Para migrar para outro banco de dados, use a ferramenta de linha de comando: 'occ db:convert-type', ou consulte a  {linkstart}documentação do ↗{linkend}. ",
     "The PHP memory limit is below the recommended value of 512MB." : "O limite de memória do PHP está abaixo do valor recomendado de 512MB.",
     "Some app directories are owned by a different user than the web server one. This may be the case if apps have been installed manually. Check the permissions of the following app directories:" : "Alguns diretórios de aplicativos são de propriedade de um usuário diferente do servidor da web. Esse pode ser o caso se os aplicativos tiverem sido instalados manualmente. Verifique as permissões dos seguintes diretórios de aplicativos:",
-    "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL é usado como banco de dados, mas não oferece suporte a caracteres de 4 bytes. Para ser capaz de lidar com caracteres de 4 bytes (como emojis) sem problemas em nomes de arquivos ou comentários, por exemplo, é recomendado habilitar o suporte de 4 bytes no MySQL . Para mais detalhes, leia  {linkstart}a página de documentação sobre isso  ↗{linkend}.",
+    "MySQL is used as database but does not support 4-byte characters. To be able to handle 4-byte characters (like emojis) without issues in filenames or comments for example it is recommended to enable the 4-byte support in MySQL. For further details read {linkstart}the documentation page about this ↗{linkend}." : "MySQL é usado como banco de dados, mas não oferece suporte a caracteres de 4 bytes. Para ser capaz de lidar com caracteres de 4 bytes (como emojis) sem problemas em nomes de arquivos ou comentários, por exemplo, é recomendado habilitar o suporte de 4 bytes no MySQL. Para mais detalhes, leia {linkstart}a página de documentação sobre isso ↗{linkend}.",
     "This instance uses an S3 based object store as primary storage. The uploaded files are stored temporarily on the server and thus it is recommended to have 50 GB of free space available in the temp directory of PHP. Check the logs for full details about the path and the available space. To improve this please change the temporary directory in the php.ini or make more space available in that path." : "Este Nextcloud usa um armazenamento de objeto baseado no S3 como armazenamento primário. Os arquivos enviados são armazenados temporariamente no servidor e portanto é recomendado ter 50 GB de espaço livre disponível no diretório temp do PHP. Verifique os logs para obter detalhes completos sobre o caminho e o espaço disponível. Para melhorar isso, altere o diretório temporário no arquivo php.ini ou disponibilize mais espaço nesse caminho.",
-    "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Você está acessando sua instância por meio de uma conexão segura, mas sua instância está gerando URLs inseguros. Isso provavelmente significa que você está atrás de um proxy reverso e as variáveis de configuração de substituição não estão definidas corretamente . Por favor leia  {linkstart}a página de documentação sobre isso  ↗{linkend}.",
+    "You are accessing your instance over a secure connection, however your instance is generating insecure URLs. This most likely means that you are behind a reverse proxy and the overwrite config variables are not set correctly. Please read {linkstart}the documentation page about this ↗{linkend}." : "Você está acessando sua instância por meio de uma conexão segura, mas sua instância está gerando URLs inseguros. Isso provavelmente significa que você está atrás de um proxy reverso e as variáveis de configuração de substituição não estão definidas corretamente. Por favor leia {linkstart}a página de documentação sobre isso ↗{linkend}.",
     "Error occurred while checking server setup" : "Erro ao verificar a configuração do servidor",
-    "For more details see the {linkstart}documentation ↗{linkend}." : "Para obter mais detalhes, consulte a {linkstart}documentação  ↗{linkend}.",
+    "For more details see the {linkstart}documentation ↗{linkend}." : "Para obter mais detalhes, consulte a {linkstart}documentação ↗{linkend}.",
     "Your data directory and files are probably accessible from the Internet. The .htaccess file is not working. It is strongly recommended that you configure your web server so that the data directory is no longer accessible, or move the data directory outside the web server document root." : "Seu diretório de dados e arquivos provavelmente podem ser acessados pela Internet. O arquivo .htaccess não está funcionando. É altamente recomendado que você configure seu servidor web para que o diretório de dados não seja mais acessível ou mova o diretório de dados fora da raiz de documentos do servidor web.",
     "The \"{header}\" HTTP header is not set to \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não está definido para \"{expected}\". Este é um potencial risco de segurança ou privacidade e é recomendado ajustar esta configuração de acordo.",
     "The \"{header}\" HTTP header is not set to \"{expected}\". Some features might not work correctly, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não está definido para \"{expected}\". Alguns recursos podem não funcionar corretamente e é recomendado ajustar esta configuração de acordo.",
     "The \"{header}\" HTTP header doesn't contain \"{expected}\". This is a potential security or privacy risk, as it is recommended to adjust this setting accordingly." : "O cabeçalho HTTP \"{header}\" não contém \"{expected}\". Esse é um risco potencial de segurança ou privacidade. É recomendável ajustar essa configuração de acordo.",
-    "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "O \"{header}\" O cabeçalho HTTP não está definido para  \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" ou \"{val5}\". Isso pode vazar informações do referenciador. Veja {linkstart}Recomendações W3C  ↗{linkend}.",
+    "The \"{header}\" HTTP header is not set to \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" or \"{val5}\". This can leak referer information. See the {linkstart}W3C Recommendation ↗{linkend}." : "O cabeçalho HTTP \"{header}\" não está definido para \"{val1}\", \"{val2}\", \"{val3}\", \"{val4}\" ou \"{val5}\". Isso pode vazar informações de referer. Veja {linkstart}Recomendações W3C ↗{linkend}.",
-    "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "O \"Strict-Transport-Security\" O cabeçalho HTTP não está definido para pelo menos  \"{seconds}\" seguntos. Para maior segurança, é recomendável habilitar o HSTS conforme descrito nas  {linkstart}dicas de segurança ↗{linkend}.",
+    "The \"Strict-Transport-Security\" HTTP header is not set to at least \"{seconds}\" seconds. For enhanced security, it is recommended to enable HSTS as described in the {linkstart}security tips ↗{linkend}." : "O cabeçalho HTTP \"Strict-Transport-Security\" não está definido para pelo menos \"{seconds}\" seguntos. Para maior segurança, é recomendável habilitar o HSTS conforme descrito nas {linkstart}dicas de segurança ↗{linkend}.",
-    "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Acessando o site de forma insegura via HTTP. É altamente recomendável configurar seu servidor para exigir HTTPS, conforme descrito nas {linkstart}dicas de segurança  ↗{linkend}. ",
+    "Accessing site insecurely via HTTP. You are strongly advised to set up your server to require HTTPS instead, as described in the {linkstart}security tips ↗{linkend}." : "Acessando o site de forma insegura via HTTP. É altamente recomendável configurar seu servidor para exigir HTTPS, conforme descrito nas {linkstart}dicas de segurança ↗{linkend}.",
     "unknown text" : "texto desconhecido",
     "Hello world!" : "Olá mundo!",
     "sunny" : "ensolarado",
@@ -124,6 +124,8 @@
     "Please reload the page." : "Por favor recarregue a página",
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "A atualização não foi realizada com sucesso. Para mais informações <a href=\"{url}\">verifique nosso post no fórum</a> que abrange esta questão.",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "A atualização não foi realizada com sucesso. Por favor, informe este problema para  a <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">comunidade Nextcloud</a>.",
+    "Continue to {productName}" : "Continuar para {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["A atualização foi bem-sucedida. Redirecionando você à {productName} em %n segundo.","A atualização foi bem-sucedida. Redirecionando você para {productName} em %n segundos."],
     "Log in" : "Entrar",
     "Logging in …" : "Entrando...",
     "Server side authentication failed!" : "Autenticação do servidor falhou!",

core/l10n/zh_CN.js

@@ -126,6 +126,8 @@ OC.L10N.register(
     "Please reload the page." : "请重新加载页面。",
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "更新不成功。有关此问题的更多信息请<a href=\"{url}\">查看我们的论坛帖子</a>。",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "升级失败。请将此问题报告给 <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud 社区</a>。",
+    "Continue to {productName}" : "继续到 {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["更新成功。%n 秒内将把你重定向到 {productName}"],
     "Log in" : "登录",
     "Logging in …" : "正在登录 …",
     "Server side authentication failed!" : "服务端认证失败！",

core/l10n/zh_CN.json

@@ -124,6 +124,8 @@
     "Please reload the page." : "请重新加载页面。",
     "The update was unsuccessful. For more information <a href=\"{url}\">check our forum post</a> covering this issue." : "更新不成功。有关此问题的更多信息请<a href=\"{url}\">查看我们的论坛帖子</a>。",
     "The update was unsuccessful. Please report this issue to the <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud community</a>." : "升级失败。请将此问题报告给 <a href=\"https://github.com/nextcloud/server/issues\" target=\"_blank\">Nextcloud 社区</a>。",
+    "Continue to {productName}" : "继续到 {productName}",
+    "_The update was successful. Redirecting you to {productName} in %n second._::_The update was successful. Redirecting you to {productName} in %n seconds._" : ["更新成功。%n 秒内将把你重定向到 {productName}"],
     "Log in" : "登录",
     "Logging in …" : "正在登录 …",
     "Server side authentication failed!" : "服务端认证失败！",