[tx-robot] updated from transifex
This commit is contained in:
Nextcloud bot
parent
7b294aee0d
commit
efdb5cc53c
|
|
@ -32,7 +32,7 @@ OC.L10N.register(
|
|||
"Can not read this file, probably this is a shared file. Please ask the file owner to reshare the file with you." : "Non foi posíbel ler o ficheiro, probabelmente tratase dun ficheiro compartido. Pídalle ao propietario do ficheiro que volva compartir o ficheiro con vostede.",
|
||||
"Default encryption module" : "Módulo de cifrado predeterminado",
|
||||
"Default encryption module for server-side encryption" : "Módulo de cifrado predeterminado para o cifrado no lado do servidor",
|
||||
"In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de cifrado é preciso activar o cifrado no lado\n\t\tdo servidor nos axustes do administrador. Una vez activado este módulo cifrará\n\t\ttodos os seus ficheiros de xeito transparente. O cifrado basease en claves AES 256.\n\t\tO módulo non tocará os ficheiros existentes, só se cifran os ficheiros novos\n\t\tapós que se active o cifrado no lado do servidor. Tampouco é posíbel\n\t\tdesactivar o cifrado e volver a un sistema sen cifrar.\n\t\tLea a documentación para coñecer todas as implicacións antes de decidir\n\t\tactivar o cifrado no lado do servidor.",
|
||||
"In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de cifrado é preciso activar o cifrado no lado\n\t\tdo servidor nos axustes de administración. Una vez activado este módulo cifrará\n\t\ttodos os seus ficheiros de xeito transparente. O cifrado basease en claves AES 256.\n\t\tO módulo non tocará os ficheiros existentes, só se cifran os ficheiros novos\n\t\tapós que se active o cifrado no lado do servidor. Tampouco é posíbel\n\t\tdesactivar o cifrado e volver a un sistema sen cifrar.\n\t\tLea a documentación para coñecer todas as implicacións antes de decidir\n\t\tactivar o cifrado no lado do servidor.",
|
||||
"Hey there,\n\nthe admin enabled server-side-encryption. Your files were encrypted using the password '%s'.\n\nPlease login to the web interface, go to the section 'basic encryption module' of your personal settings and update your encryption password by entering this password into the 'old log-in password' field and your current login-password.\n\n" : "Ola.\n\nO administrador activou o cifrado de datos no servidor. Os seus ficheiros foron cifrados co contrasinal «%s».\n\nInicie a súa sesión dende a interface web, vaia á sección «Módulo de cifrado básico» dos seus axustes persoais e actualice o contrasinal de cifrado. Para iso, deberá introducir este contrasinal no campo «Contrasinal antigo de acceso» xunto co seu actual contrasinal de acceso.\n\n",
|
||||
"The share will expire on %s." : "Este recurso compartido caduca o %s.",
|
||||
"Cheers!" : "Saúdos!",
|
||||
|
|
|
|||
|
|
@ -30,7 +30,7 @@
|
|||
"Can not read this file, probably this is a shared file. Please ask the file owner to reshare the file with you." : "Non foi posíbel ler o ficheiro, probabelmente tratase dun ficheiro compartido. Pídalle ao propietario do ficheiro que volva compartir o ficheiro con vostede.",
|
||||
"Default encryption module" : "Módulo de cifrado predeterminado",
|
||||
"Default encryption module for server-side encryption" : "Módulo de cifrado predeterminado para o cifrado no lado do servidor",
|
||||
"In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de cifrado é preciso activar o cifrado no lado\n\t\tdo servidor nos axustes do administrador. Una vez activado este módulo cifrará\n\t\ttodos os seus ficheiros de xeito transparente. O cifrado basease en claves AES 256.\n\t\tO módulo non tocará os ficheiros existentes, só se cifran os ficheiros novos\n\t\tapós que se active o cifrado no lado do servidor. Tampouco é posíbel\n\t\tdesactivar o cifrado e volver a un sistema sen cifrar.\n\t\tLea a documentación para coñecer todas as implicacións antes de decidir\n\t\tactivar o cifrado no lado do servidor.",
|
||||
"In order to use this encryption module you need to enable server-side\n\t\tencryption in the admin settings. Once enabled this module will encrypt\n\t\tall your files transparently. The encryption is based on AES 256 keys.\n\t\tThe module won't touch existing files, only new files will be encrypted\n\t\tafter server-side encryption was enabled. It is also not possible to\n\t\tdisable the encryption again and switch back to a unencrypted system.\n\t\tPlease read the documentation to know all implications before you decide\n\t\tto enable server-side encryption." : "Para usar este módulo de cifrado é preciso activar o cifrado no lado\n\t\tdo servidor nos axustes de administración. Una vez activado este módulo cifrará\n\t\ttodos os seus ficheiros de xeito transparente. O cifrado basease en claves AES 256.\n\t\tO módulo non tocará os ficheiros existentes, só se cifran os ficheiros novos\n\t\tapós que se active o cifrado no lado do servidor. Tampouco é posíbel\n\t\tdesactivar o cifrado e volver a un sistema sen cifrar.\n\t\tLea a documentación para coñecer todas as implicacións antes de decidir\n\t\tactivar o cifrado no lado do servidor.",
|
||||
"Hey there,\n\nthe admin enabled server-side-encryption. Your files were encrypted using the password '%s'.\n\nPlease login to the web interface, go to the section 'basic encryption module' of your personal settings and update your encryption password by entering this password into the 'old log-in password' field and your current login-password.\n\n" : "Ola.\n\nO administrador activou o cifrado de datos no servidor. Os seus ficheiros foron cifrados co contrasinal «%s».\n\nInicie a súa sesión dende a interface web, vaia á sección «Módulo de cifrado básico» dos seus axustes persoais e actualice o contrasinal de cifrado. Para iso, deberá introducir este contrasinal no campo «Contrasinal antigo de acceso» xunto co seu actual contrasinal de acceso.\n\n",
|
||||
"The share will expire on %s." : "Este recurso compartido caduca o %s.",
|
||||
"Cheers!" : "Saúdos!",
|
||||
|
|
|
|||
|
|
@ -18,7 +18,7 @@ OC.L10N.register(
|
|||
"Federated Share request sent, you will receive an invitation. Check your notifications." : "Wysłano żądanie Udostępniania Federacyjnego, otrzymasz zaproszenie. Sprawdzaj swoje powiadomienia.",
|
||||
"Couldn't establish a federated share, it looks like the server to federate with is too old (Nextcloud <= 9)." : "Nie można ustanowić współdzielenia federacyjnego. Wygląda na to, że serwer wybrany do udostępnienia jest zbyt stary (Nextcloud <= 9).",
|
||||
"It is not allowed to send federated group shares from this server." : "Niedozwolone jest wysyłanie grupowych udostępnień federacyjnych z tego serwera.",
|
||||
"Sharing %1$s failed, because this item is already shared with %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już współdzielony z %2$s",
|
||||
"Sharing %1$s failed, because this item is already shared with %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już udostępniony %2$s",
|
||||
"Not allowed to create a federated share with the same user" : "Nie można tworzyć udostępniania federacyjnego z tym samym użytkownikiem",
|
||||
"File is already shared with %s" : "Plik jest już udostępniony dla %s",
|
||||
"Sharing %1$s failed, could not find %2$s, maybe the server is currently unreachable or uses a self-signed certificate." : "Udostępnianie %1$s nie powiodło się, nie można odnaleźć %2$s, być może serwer jest nieosiągalny lub używa certyfikatu z podpisem własnym.",
|
||||
|
|
|
|||
|
|
@ -16,7 +16,7 @@
|
|||
"Federated Share request sent, you will receive an invitation. Check your notifications." : "Wysłano żądanie Udostępniania Federacyjnego, otrzymasz zaproszenie. Sprawdzaj swoje powiadomienia.",
|
||||
"Couldn't establish a federated share, it looks like the server to federate with is too old (Nextcloud <= 9)." : "Nie można ustanowić współdzielenia federacyjnego. Wygląda na to, że serwer wybrany do udostępnienia jest zbyt stary (Nextcloud <= 9).",
|
||||
"It is not allowed to send federated group shares from this server." : "Niedozwolone jest wysyłanie grupowych udostępnień federacyjnych z tego serwera.",
|
||||
"Sharing %1$s failed, because this item is already shared with %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już współdzielony z %2$s",
|
||||
"Sharing %1$s failed, because this item is already shared with %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już udostępniony %2$s",
|
||||
"Not allowed to create a federated share with the same user" : "Nie można tworzyć udostępniania federacyjnego z tym samym użytkownikiem",
|
||||
"File is already shared with %s" : "Plik jest już udostępniony dla %s",
|
||||
"Sharing %1$s failed, could not find %2$s, maybe the server is currently unreachable or uses a self-signed certificate." : "Udostępnianie %1$s nie powiodło się, nie można odnaleźć %2$s, być może serwer jest nieosiągalny lub używa certyfikatu z podpisem własnym.",
|
||||
|
|
|
|||
|
|
@ -24,7 +24,7 @@ OC.L10N.register(
|
|||
"Password to access {file} was sent to {email}" : "Hasło dostępu do {file} zostało wysłane do {email}",
|
||||
"Password to access %1$s was sent to you" : "Hasło dostępu do %1$s zostało do Ciebie wysłane",
|
||||
"Password to access {file} was sent to you" : "Hasło dostępu do {file} zostało do Ciebie wysłane",
|
||||
"Sharing %1$s failed, this item is already shared with %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już współdzielony z %2$s",
|
||||
"Sharing %1$s failed, this item is already shared with %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już udostępniony %2$s",
|
||||
"We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "Nie można wysłać automatycznie wygenerowanego hasła. Proszę ustawić prawidłowy adres e-mail w ustawieniach osobistych i spróbować ponownie.",
|
||||
"Failed to send share by email" : "Nie udało się wysłać linku udostępnienia e-mailem",
|
||||
"%1$s shared »%2$s« with you" : "%1$s udostępnił »%2$s«",
|
||||
|
|
|
|||
|
|
@ -22,7 +22,7 @@
|
|||
"Password to access {file} was sent to {email}" : "Hasło dostępu do {file} zostało wysłane do {email}",
|
||||
"Password to access %1$s was sent to you" : "Hasło dostępu do %1$s zostało do Ciebie wysłane",
|
||||
"Password to access {file} was sent to you" : "Hasło dostępu do {file} zostało do Ciebie wysłane",
|
||||
"Sharing %1$s failed, this item is already shared with %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już współdzielony z %2$s",
|
||||
"Sharing %1$s failed, this item is already shared with %2$s" : "Udostępnianie %1$s nie powiodło się, ponieważ ten element jest już udostępniony %2$s",
|
||||
"We can't send you the auto-generated password. Please set a valid email address in your personal settings and try again." : "Nie można wysłać automatycznie wygenerowanego hasła. Proszę ustawić prawidłowy adres e-mail w ustawieniach osobistych i spróbować ponownie.",
|
||||
"Failed to send share by email" : "Nie udało się wysłać linku udostępnienia e-mailem",
|
||||
"%1$s shared »%2$s« with you" : "%1$s udostępnił »%2$s«",
|
||||
|
|
|
|||
|
|
@ -180,10 +180,10 @@ OC.L10N.register(
|
|||
"\"$home\" Placeholder Field" : "\"$home\" 佔位符字段",
|
||||
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "外部存儲配置中的 $home 將替換為指定屬性的值",
|
||||
"Internal Username" : "內部用戶名稱",
|
||||
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "默認情況下調試UUID屬性創建內部用戶名。將確保用戶名是唯一的字符，並且不需要轉換。內部用戶名，只允許使用這些字符：[ a-zA-Z0-9_.@- ]。其他字符被替換為它們的ASCII對應或簡單地被忽略。如果出現重複，將添加或增加一個數字。內部用戶名用作在內部標識用戶。它是用戶主文件夾的替代名稱。它也是遠端URL的一部分，例如對於所有 *DAV 服務。使用此設置，可以覆蓋預設行為。將其保留為空以保留默認行為。更改僅對新映射（添加）的LDAP用戶有效。",
|
||||
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "默認情況下，內部用戶名將從UUID屬性創建。 這樣可以確保用戶名是唯一的，並且不需要轉換任何字符。內部用戶名的限制是只能使用以下字符：[ a-zA-Z0-9_.@- ]。其他字符被替換為它們的ASCII對應或被略去。發生相抵觸時，將添加或增量數字。內部用戶名用於在內部標識用戶。它也是用戶主資料夾的默認名稱。它也是遠端URL的一部分，例如，用於所有 *DAV 服務。使用此設置，可以覆蓋默認行為。將其保留為空以保留默認行為。 更改僅對新映射（添加）的LDAP用戶有效。",
|
||||
"Internal Username Attribute:" : "內部用戶名稱屬性:",
|
||||
"Override UUID detection" : "偵測覆寫UUID",
|
||||
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "預設情況下，UUID 屬性會自動偵測。UUID 屬性用來準確識別 LDAP 用戶及群組。此外，如果未在上方指定，內部用戶名稱會基於 UUID 建立。您能覆蓋設定並直接指定屬性，但一定要確保指定的屬性能被用戶及群組取得且唯一。留空則執行預設行為。變更只會對新映射 (加入) 的 LDAP 用戶及群組生效。",
|
||||
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "預設情況下，UUID 屬性會自動偵測。UUID 屬性用來準確識別 LDAP 用戶及群組。此外，如果未在上方指定，內部用戶名稱會基於 UUID 建立。您能覆蓋設定並直接指定屬性，但一定要確保指定的屬性能被用戶及群組取得且唯一。留空則執行默認行為。變更只會對新映射 (加入) 的 LDAP 用戶及群組生效。",
|
||||
"UUID Attribute for Users:" : "用戶的UUID值:",
|
||||
"UUID Attribute for Groups:" : "群組的UUID值:",
|
||||
"Username-LDAP User Mapping" : "用戶名-LDAP 用戶 Mapping",
|
||||
|
|
|
|||
|
|
@ -178,10 +178,10 @@
|
|||
"\"$home\" Placeholder Field" : "\"$home\" 佔位符字段",
|
||||
"$home in an external storage configuration will be replaced with the value of the specified attribute" : "外部存儲配置中的 $home 將替換為指定屬性的值",
|
||||
"Internal Username" : "內部用戶名稱",
|
||||
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "默認情況下調試UUID屬性創建內部用戶名。將確保用戶名是唯一的字符，並且不需要轉換。內部用戶名，只允許使用這些字符：[ a-zA-Z0-9_.@- ]。其他字符被替換為它們的ASCII對應或簡單地被忽略。如果出現重複，將添加或增加一個數字。內部用戶名用作在內部標識用戶。它是用戶主文件夾的替代名稱。它也是遠端URL的一部分，例如對於所有 *DAV 服務。使用此設置，可以覆蓋預設行為。將其保留為空以保留默認行為。更改僅對新映射（添加）的LDAP用戶有效。",
|
||||
"By default the internal username will be created from the UUID attribute. It makes sure that the username is unique and characters do not need to be converted. The internal username has the restriction that only these characters are allowed: [ a-zA-Z0-9_.@- ]. Other characters are replaced with their ASCII correspondence or simply omitted. On collisions a number will be added/increased. The internal username is used to identify a user internally. It is also the default name for the user home folder. It is also a part of remote URLs, for instance for all *DAV services. With this setting, the default behavior can be overridden. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users." : "默認情況下，內部用戶名將從UUID屬性創建。 這樣可以確保用戶名是唯一的，並且不需要轉換任何字符。內部用戶名的限制是只能使用以下字符：[ a-zA-Z0-9_.@- ]。其他字符被替換為它們的ASCII對應或被略去。發生相抵觸時，將添加或增量數字。內部用戶名用於在內部標識用戶。它也是用戶主資料夾的默認名稱。它也是遠端URL的一部分，例如，用於所有 *DAV 服務。使用此設置，可以覆蓋默認行為。將其保留為空以保留默認行為。 更改僅對新映射（添加）的LDAP用戶有效。",
|
||||
"Internal Username Attribute:" : "內部用戶名稱屬性:",
|
||||
"Override UUID detection" : "偵測覆寫UUID",
|
||||
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "預設情況下，UUID 屬性會自動偵測。UUID 屬性用來準確識別 LDAP 用戶及群組。此外，如果未在上方指定，內部用戶名稱會基於 UUID 建立。您能覆蓋設定並直接指定屬性，但一定要確保指定的屬性能被用戶及群組取得且唯一。留空則執行預設行為。變更只會對新映射 (加入) 的 LDAP 用戶及群組生效。",
|
||||
"By default, the UUID attribute is automatically detected. The UUID attribute is used to doubtlessly identify LDAP users and groups. Also, the internal username will be created based on the UUID, if not specified otherwise above. You can override the setting and pass an attribute of your choice. You must make sure that the attribute of your choice can be fetched for both users and groups and it is unique. Leave it empty for default behavior. Changes will have effect only on newly mapped (added) LDAP users and groups." : "預設情況下，UUID 屬性會自動偵測。UUID 屬性用來準確識別 LDAP 用戶及群組。此外，如果未在上方指定，內部用戶名稱會基於 UUID 建立。您能覆蓋設定並直接指定屬性，但一定要確保指定的屬性能被用戶及群組取得且唯一。留空則執行默認行為。變更只會對新映射 (加入) 的 LDAP 用戶及群組生效。",
|
||||
"UUID Attribute for Users:" : "用戶的UUID值:",
|
||||
"UUID Attribute for Groups:" : "群組的UUID值:",
|
||||
"Username-LDAP User Mapping" : "用戶名-LDAP 用戶 Mapping",
|
||||
|
|
|
|||
|
|
@ -80,7 +80,7 @@ OC.L10N.register(
|
|||
"You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "您當前正在運行PHP {version}。只要您的發行版支持，請升級PHP版本以利用 {linkstart}PHP Group↗提供的性能和安全更新{linkend}。",
|
||||
"Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20將是支援PHP 7.2得最後一個版本，Nextcloud 21僅支援PHP 7.3以上的PHP。",
|
||||
"The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "反向代理標頭（reverse proxy header）配置不正確，或者您正在從受信任的代理（trusted proxy）存取 Nextcloud。如果不是這樣，則這是一個安全問題，並且可以使攻擊者欺騙其對 Nextcloud 可見的IP地址。可以在{linkstart}文檔↗{linkend}中找到更多資訊。",
|
||||
"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached 配置為分佈式緩存，但是安裝了錯誤的PHP模塊 “memcache”。\\OC\\Memcache\\Memcached 僅支持 “memcached”，不支持 “memcache”。有關這兩個模塊的信息，請參見{linkstart}內存緩存wiki {linkend}。",
|
||||
"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached 配置為分布式緩存，但是安裝了錯誤的PHP模塊 “memcache”。\\OC\\Memcache\\Memcached 僅支持 “memcached”，不支持 “memcache”。有關這兩個模塊的信息，請參見{linkstart}內存緩存wiki {linkend}。",
|
||||
"Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "某些檔案未通過完整性檢查。有關如何解決此問題的更多信息，請參見{linkstart1}文檔↗{linkend}。（{linkstart2}無效檔案清單…{linkend} / {linkstart3}重新掃描…{linkend}）",
|
||||
"The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "未加載 PHP OPcache 模塊。{linkstart}為獲得更佳性能，建議↗{linked}將其加載到您的 PHP 安裝中。",
|
||||
"The PHP OPcache module is not properly configured. {linkstart}For better performance it is recommended ↗{linkend} to use the following settings in the <code>php.ini</code>:" : "PHP OPcache 模塊未正確配置。{linkstart}為獲得更佳性能，建議↗{linkend}在 <code>php.ini</code> 中使用以下設定：",
|
||||
|
|
@ -207,8 +207,8 @@ OC.L10N.register(
|
|||
"OK" : "OK",
|
||||
"Error loading message template: {error}" : "載入訊息範本時發生錯誤： {error}",
|
||||
"read-only" : "唯讀",
|
||||
"_{count} file conflict_::_{count} file conflicts_" : ["{count} 個檔案衝突"],
|
||||
"One file conflict" : "一個檔案衝突",
|
||||
"_{count} file conflict_::_{count} file conflicts_" : ["{count} 個檔案相抵觸"],
|
||||
"One file conflict" : "一個檔案抵觸",
|
||||
"New Files" : "新檔案",
|
||||
"Already existing files" : "已經存在的檔案",
|
||||
"Which files do you want to keep?" : "您要保留哪一個檔案？",
|
||||
|
|
@ -374,14 +374,14 @@ OC.L10N.register(
|
|||
"Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation ↗</a> for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 \"filelocking.enabled\" 以避免出現這樣的問題，請參考<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件 ↗</a> 來了解更多的資訊。",
|
||||
"Last background job execution ran {relativeTime}. Something seems wrong." : "上次背景工作是於 {relativeTime} 前執行，似乎很久沒有執行了，有點問題",
|
||||
"Check the background job settings" : "請檢查背景工作的設定",
|
||||
"No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "您沒有設定記憶體快取 (memcache)，如果可以，請完成設定來提升效能。更多資訊請查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>",
|
||||
"No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "您沒有設定記憶體快取 (memcache)。如果可以，請完成設定來提升效能。更多資訊請查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>",
|
||||
"No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "PHP無法取得合適的亂數產生源。為了安全性考量，不建議如此做。更多資訊參考<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>",
|
||||
"You are currently running PHP {version}. Upgrade your PHP version to take advantage of <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{phpLink}\">performance and security updates provided by the PHP Group</a> as soon as your distribution supports it." : "您目前正運行 PHP {version} ，我們建議您升級 PHP 到您的發行版所支援的最新版本，以獲得 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{phpLink}\">PHP 開發團隊提供的效能與安全性更新</a>。",
|
||||
"The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "偵測到您的反向代理標頭設定不正確，但也有可能是因為您目前正透過信任的代理伺服器存取 Nextcloud。若您目前不是透過信任的代理伺服器存取 Nextcloud，這就是一個安全性問題，允許攻擊者對 Nextcloud 假冒 IP 位址。更多資訊請查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>。",
|
||||
"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "您已經設定 Memcached 為分散式快取，但是您安裝了錯誤的 PHP 模組 \"memcache\" ， Nextcloud 的 \\OC\\Memcache\\Memcached 元件不支援 \"memcache\" 模組，僅支援 \"memcached\" 模組。若想要更加瞭解這兩個模組，請閱讀 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{wikiLink}\">memcached wiki</a>。",
|
||||
"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "您已經設定 Memcached 為分布式快取，但是您安裝了錯誤的 PHP 模組 \"memcache\" 。Nextcloud 的 \\OC\\Memcache\\Memcached 元件不支援 \"memcache\" 模組，僅支援 \"memcached\" 模組。若想要更加了解這兩個模組，請查閱 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{wikiLink}\">memcached wiki</a>。",
|
||||
"Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "有些檔案並未通過完整性檢查。可參閱詳細資訊，如我們的<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">說明文件</a>（<a href=\"{codeIntegrityDownloadEndpoint}\">無效檔案列表</a>/<a href=\"{rescanEndpoint}\">重新檢查</a>）以解決這些問題。",
|
||||
"The PHP OPcache module is not loaded. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">For better performance it is recommended</a> to load it into your PHP installation." : "PHP 的 OPcache 模組並未被載入。 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">為了提供更好的效能</a>，建議將此PHP模組載入。",
|
||||
"The PHP OPcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">For better performance it is recommended</a> to use the following settings in the <code>php.ini</code>:" : "PHP 的 OPcache 功能並未被妥善設定。<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">為了有更好的效能表現</a>，我們建議在 <code>php.ini</code> 設定檔中使用以下設定：",
|
||||
"The PHP OPcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">For better performance it is recommended</a> to use the following settings in the <code>php.ini</code>:" : "PHP 的 OPcache 功能並未被妥善設定。<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">為了有更好的效能表現</a>，我們建議在 <code>php.ini</code> 中使用以下設定：",
|
||||
"Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">the documentation page about this</a>." : "數據庫的有些欄位缺少big int.格式轉換。因為攔位格式轉換需要一些時間，所以沒有自動轉換。你可以執行'occ db:convert-filecache-bigin'手動完成轉換，轉換時Nextcloud服務必須處於離線狀態。詳情請參閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">關於此的使用手冊頁</a>",
|
||||
"To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation ↗</a>." : "若要遷移至另一個數據庫，請使用命令列工具： 'occ db:convert-type' ，或是查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>。",
|
||||
"Use of the the built in php mailer is no longer supported. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">Please update your email server settings ↗<a/>." : "我們將不再支援使用 PHP mailer 發送電子郵件。<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">請更新您電子郵件伺服器的相關設定<a/>。",
|
||||
|
|
|
|||
|
|
@ -78,7 +78,7 @@
|
|||
"You are currently running PHP {version}. Upgrade your PHP version to take advantage of {linkstart}performance and security updates provided by the PHP Group ↗{linkend} as soon as your distribution supports it." : "您當前正在運行PHP {version}。只要您的發行版支持，請升級PHP版本以利用 {linkstart}PHP Group↗提供的性能和安全更新{linkend}。",
|
||||
"Nextcloud 20 is the last release supporting PHP 7.2. Nextcloud 21 requires at least PHP 7.3." : "Nextcloud 20將是支援PHP 7.2得最後一個版本，Nextcloud 21僅支援PHP 7.3以上的PHP。",
|
||||
"The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the {linkstart}documentation ↗{linkend}." : "反向代理標頭（reverse proxy header）配置不正確，或者您正在從受信任的代理（trusted proxy）存取 Nextcloud。如果不是這樣，則這是一個安全問題，並且可以使攻擊者欺騙其對 Nextcloud 可見的IP地址。可以在{linkstart}文檔↗{linkend}中找到更多資訊。",
|
||||
"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached 配置為分佈式緩存，但是安裝了錯誤的PHP模塊 “memcache”。\\OC\\Memcache\\Memcached 僅支持 “memcached”，不支持 “memcache”。有關這兩個模塊的信息，請參見{linkstart}內存緩存wiki {linkend}。",
|
||||
"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the {linkstart}memcached wiki about both modules ↗{linkend}." : "Memcached 配置為分布式緩存，但是安裝了錯誤的PHP模塊 “memcache”。\\OC\\Memcache\\Memcached 僅支持 “memcached”，不支持 “memcache”。有關這兩個模塊的信息，請參見{linkstart}內存緩存wiki {linkend}。",
|
||||
"Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the {linkstart1}documentation ↗{linkend}. ({linkstart2}List of invalid files…{linkend} / {linkstart3}Rescan…{linkend})" : "某些檔案未通過完整性檢查。有關如何解決此問題的更多信息，請參見{linkstart1}文檔↗{linkend}。（{linkstart2}無效檔案清單…{linkend} / {linkstart3}重新掃描…{linkend}）",
|
||||
"The PHP OPcache module is not loaded. {linkstart}For better performance it is recommended ↗{linkend} to load it into your PHP installation." : "未加載 PHP OPcache 模塊。{linkstart}為獲得更佳性能，建議↗{linked}將其加載到您的 PHP 安裝中。",
|
||||
"The PHP OPcache module is not properly configured. {linkstart}For better performance it is recommended ↗{linkend} to use the following settings in the <code>php.ini</code>:" : "PHP OPcache 模塊未正確配置。{linkstart}為獲得更佳性能，建議↗{linkend}在 <code>php.ini</code> 中使用以下設定：",
|
||||
|
|
@ -205,8 +205,8 @@
|
|||
"OK" : "OK",
|
||||
"Error loading message template: {error}" : "載入訊息範本時發生錯誤： {error}",
|
||||
"read-only" : "唯讀",
|
||||
"_{count} file conflict_::_{count} file conflicts_" : ["{count} 個檔案衝突"],
|
||||
"One file conflict" : "一個檔案衝突",
|
||||
"_{count} file conflict_::_{count} file conflicts_" : ["{count} 個檔案相抵觸"],
|
||||
"One file conflict" : "一個檔案抵觸",
|
||||
"New Files" : "新檔案",
|
||||
"Already existing files" : "已經存在的檔案",
|
||||
"Which files do you want to keep?" : "您要保留哪一個檔案？",
|
||||
|
|
@ -372,14 +372,14 @@
|
|||
"Transactional file locking is disabled, this might lead to issues with race conditions. Enable \"filelocking.enabled\" in config.php to avoid these problems. See the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation ↗</a> for more information." : "事務型文件鎖定的功能已經取消，這可能會造成競態條件，請在 config.php 中啟用 \"filelocking.enabled\" 以避免出現這樣的問題，請參考<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件 ↗</a> 來了解更多的資訊。",
|
||||
"Last background job execution ran {relativeTime}. Something seems wrong." : "上次背景工作是於 {relativeTime} 前執行，似乎很久沒有執行了，有點問題",
|
||||
"Check the background job settings" : "請檢查背景工作的設定",
|
||||
"No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "您沒有設定記憶體快取 (memcache)，如果可以，請完成設定來提升效能。更多資訊請查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>",
|
||||
"No memory cache has been configured. To enhance performance, please configure a memcache, if available. Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "您沒有設定記憶體快取 (memcache)。如果可以，請完成設定來提升效能。更多資訊請查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>",
|
||||
"No suitable source for randomness found by PHP which is highly discouraged for security reasons. Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "PHP無法取得合適的亂數產生源。為了安全性考量，不建議如此做。更多資訊參考<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>",
|
||||
"You are currently running PHP {version}. Upgrade your PHP version to take advantage of <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{phpLink}\">performance and security updates provided by the PHP Group</a> as soon as your distribution supports it." : "您目前正運行 PHP {version} ，我們建議您升級 PHP 到您的發行版所支援的最新版本，以獲得 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{phpLink}\">PHP 開發團隊提供的效能與安全性更新</a>。",
|
||||
"The reverse proxy header configuration is incorrect, or you are accessing Nextcloud from a trusted proxy. If not, this is a security issue and can allow an attacker to spoof their IP address as visible to the Nextcloud. Further information can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>." : "偵測到您的反向代理標頭設定不正確，但也有可能是因為您目前正透過信任的代理伺服器存取 Nextcloud。若您目前不是透過信任的代理伺服器存取 Nextcloud，這就是一個安全性問題，允許攻擊者對 Nextcloud 假冒 IP 位址。更多資訊請查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>。",
|
||||
"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "您已經設定 Memcached 為分散式快取，但是您安裝了錯誤的 PHP 模組 \"memcache\" ， Nextcloud 的 \\OC\\Memcache\\Memcached 元件不支援 \"memcache\" 模組，僅支援 \"memcached\" 模組。若想要更加瞭解這兩個模組，請閱讀 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{wikiLink}\">memcached wiki</a>。",
|
||||
"Memcached is configured as distributed cache, but the wrong PHP module \"memcache\" is installed. \\OC\\Memcache\\Memcached only supports \"memcached\" and not \"memcache\". See the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{wikiLink}\">memcached wiki about both modules</a>." : "您已經設定 Memcached 為分布式快取，但是您安裝了錯誤的 PHP 模組 \"memcache\" 。Nextcloud 的 \\OC\\Memcache\\Memcached 元件不支援 \"memcache\" 模組，僅支援 \"memcached\" 模組。若想要更加了解這兩個模組，請查閱 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{wikiLink}\">memcached wiki</a>。",
|
||||
"Some files have not passed the integrity check. Further information on how to resolve this issue can be found in the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation</a>. (<a href=\"{codeIntegrityDownloadEndpoint}\">List of invalid files…</a> / <a href=\"{rescanEndpoint}\">Rescan…</a>)" : "有些檔案並未通過完整性檢查。可參閱詳細資訊，如我們的<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">說明文件</a>（<a href=\"{codeIntegrityDownloadEndpoint}\">無效檔案列表</a>/<a href=\"{rescanEndpoint}\">重新檢查</a>）以解決這些問題。",
|
||||
"The PHP OPcache module is not loaded. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">For better performance it is recommended</a> to load it into your PHP installation." : "PHP 的 OPcache 模組並未被載入。 <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">為了提供更好的效能</a>，建議將此PHP模組載入。",
|
||||
"The PHP OPcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">For better performance it is recommended</a> to use the following settings in the <code>php.ini</code>:" : "PHP 的 OPcache 功能並未被妥善設定。<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">為了有更好的效能表現</a>，我們建議在 <code>php.ini</code> 設定檔中使用以下設定：",
|
||||
"The PHP OPcache is not properly configured. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">For better performance it is recommended</a> to use the following settings in the <code>php.ini</code>:" : "PHP 的 OPcache 功能並未被妥善設定。<a target=\"_blank\" rel=\"noreferrer\" href=\"{docLink}\">為了有更好的效能表現</a>，我們建議在 <code>php.ini</code> 中使用以下設定：",
|
||||
"Some columns in the database are missing a conversion to big int. Due to the fact that changing column types on big tables could take some time they were not changed automatically. By running 'occ db:convert-filecache-bigint' those pending changes could be applied manually. This operation needs to be made while the instance is offline. For further details read <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">the documentation page about this</a>." : "數據庫的有些欄位缺少big int.格式轉換。因為攔位格式轉換需要一些時間，所以沒有自動轉換。你可以執行'occ db:convert-filecache-bigin'手動完成轉換，轉換時Nextcloud服務必須處於離線狀態。詳情請參閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">關於此的使用手冊頁</a>",
|
||||
"To migrate to another database use the command line tool: 'occ db:convert-type', or see the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">documentation ↗</a>." : "若要遷移至另一個數據庫，請使用命令列工具： 'occ db:convert-type' ，或是查閱<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">說明文件</a>。",
|
||||
"Use of the the built in php mailer is no longer supported. <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">Please update your email server settings ↗<a/>." : "我們將不再支援使用 PHP mailer 發送電子郵件。<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"{docLink}\">請更新您電子郵件伺服器的相關設定<a/>。",
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ OC.L10N.register(
|
|||
"Expiration date is in the past" : "Datum skončení platnosti je v minulosti",
|
||||
"Can’t set expiration date more than %s days in the future" : "Nelze nastavit datum skončení platnosti více než %s dní v budoucnu",
|
||||
"Sharing is only allowed with group members" : "Je povoleno pouze sdílení s členy skupiny",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Sdílení %s se nezdařilo, protože tato položka už je sdílena s uživatelem %s",
|
||||
"%1$s shared »%2$s« with you" : "%1$s s vámi sdílí „%2$s“",
|
||||
"%1$s shared »%2$s« with you." : "%1$s vám nasdílel(a) „%2$s“.",
|
||||
"Click the button below to open it." : "Pro otevření klikněte na tlačítko níže.",
|
||||
|
|
|
|||
|
|
@ -119,6 +119,7 @@
|
|||
"Expiration date is in the past" : "Datum skončení platnosti je v minulosti",
|
||||
"Can’t set expiration date more than %s days in the future" : "Nelze nastavit datum skončení platnosti více než %s dní v budoucnu",
|
||||
"Sharing is only allowed with group members" : "Je povoleno pouze sdílení s členy skupiny",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Sdílení %s se nezdařilo, protože tato položka už je sdílena s uživatelem %s",
|
||||
"%1$s shared »%2$s« with you" : "%1$s s vámi sdílí „%2$s“",
|
||||
"%1$s shared »%2$s« with you." : "%1$s vám nasdílel(a) „%2$s“.",
|
||||
"Click the button below to open it." : "Pro otevření klikněte na tlačítko níže.",
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ OC.L10N.register(
|
|||
"Expiration date is in the past" : "Das Ablaufdatum liegt in der Vergangenheit.",
|
||||
"Can’t set expiration date more than %s days in the future" : "Das Ablaufdatum kann nicht mehr als %s Tage in der Zukunft liegen",
|
||||
"Sharing is only allowed with group members" : "Teilen ist nur mit Gruppenmitgliedern erlaubt",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Freigabe von %s fehlgeschlagen, da dieses Element schon mit dem Benutzer %s geteilt wird",
|
||||
"%1$s shared »%2$s« with you" : "%1$s hat »%2$s« mit Dir geteilt",
|
||||
"%1$s shared »%2$s« with you." : "%1$s hat »%2$s« mit Dir geteilt.",
|
||||
"Click the button below to open it." : "Klicke zum Öffnen auf die untere Schaltfläche.",
|
||||
|
|
|
|||
|
|
@ -119,6 +119,7 @@
|
|||
"Expiration date is in the past" : "Das Ablaufdatum liegt in der Vergangenheit.",
|
||||
"Can’t set expiration date more than %s days in the future" : "Das Ablaufdatum kann nicht mehr als %s Tage in der Zukunft liegen",
|
||||
"Sharing is only allowed with group members" : "Teilen ist nur mit Gruppenmitgliedern erlaubt",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Freigabe von %s fehlgeschlagen, da dieses Element schon mit dem Benutzer %s geteilt wird",
|
||||
"%1$s shared »%2$s« with you" : "%1$s hat »%2$s« mit Dir geteilt",
|
||||
"%1$s shared »%2$s« with you." : "%1$s hat »%2$s« mit Dir geteilt.",
|
||||
"Click the button below to open it." : "Klicke zum Öffnen auf die untere Schaltfläche.",
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ OC.L10N.register(
|
|||
"Expiration date is in the past" : "Das Ablaufdatum liegt in der Vergangenheit.",
|
||||
"Can’t set expiration date more than %s days in the future" : "Das Ablaufdatum kann nicht mehr als %s Tage in der Zukunft liegen",
|
||||
"Sharing is only allowed with group members" : "Teilen ist nur mit Gruppenmitgliedern erlaubt",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Freigabe von %s fehlgeschlagen, da dieses Element schon mit dem Benutzer %s geteilt wird",
|
||||
"%1$s shared »%2$s« with you" : "%1$s hat »%2$s« mit Ihnen geteilt",
|
||||
"%1$s shared »%2$s« with you." : "%1$s hat »%2$s« mit Ihnen geteilt.",
|
||||
"Click the button below to open it." : "Klicken Sie zum Öffnen auf die untere Schaltfläche.",
|
||||
|
|
|
|||
|
|
@ -119,6 +119,7 @@
|
|||
"Expiration date is in the past" : "Das Ablaufdatum liegt in der Vergangenheit.",
|
||||
"Can’t set expiration date more than %s days in the future" : "Das Ablaufdatum kann nicht mehr als %s Tage in der Zukunft liegen",
|
||||
"Sharing is only allowed with group members" : "Teilen ist nur mit Gruppenmitgliedern erlaubt",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Freigabe von %s fehlgeschlagen, da dieses Element schon mit dem Benutzer %s geteilt wird",
|
||||
"%1$s shared »%2$s« with you" : "%1$s hat »%2$s« mit Ihnen geteilt",
|
||||
"%1$s shared »%2$s« with you." : "%1$s hat »%2$s« mit Ihnen geteilt.",
|
||||
"Click the button below to open it." : "Klicken Sie zum Öffnen auf die untere Schaltfläche.",
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ OC.L10N.register(
|
|||
"Expiration date is in the past" : "Xa pasou a data de caducidade",
|
||||
"Can’t set expiration date more than %s days in the future" : "Non é posíbel estabelecer a data de caducidade máis alo de %s días no futuro",
|
||||
"Sharing is only allowed with group members" : "Só se permite compartir cos membros do grupo",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Fallou a compartición de %s por mor de que este elemento xa foi compartido co usuario %s",
|
||||
"%1$s shared »%2$s« with you" : "%1$s compartiu «%2$s» con vostede",
|
||||
"%1$s shared »%2$s« with you." : "%1$s compartiu «%2$s» con vostede.",
|
||||
"Click the button below to open it." : "Prema no botón de embaixo para abrilo.",
|
||||
|
|
|
|||
|
|
@ -119,6 +119,7 @@
|
|||
"Expiration date is in the past" : "Xa pasou a data de caducidade",
|
||||
"Can’t set expiration date more than %s days in the future" : "Non é posíbel estabelecer a data de caducidade máis alo de %s días no futuro",
|
||||
"Sharing is only allowed with group members" : "Só se permite compartir cos membros do grupo",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Fallou a compartición de %s por mor de que este elemento xa foi compartido co usuario %s",
|
||||
"%1$s shared »%2$s« with you" : "%1$s compartiu «%2$s» con vostede",
|
||||
"%1$s shared »%2$s« with you." : "%1$s compartiu «%2$s» con vostede.",
|
||||
"Click the button below to open it." : "Prema no botón de embaixo para abrilo.",
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ OC.L10N.register(
|
|||
"Expiration date is in the past" : "De vervaldatum ligt in het verleden",
|
||||
"Can’t set expiration date more than %s days in the future" : "Kan de vervaldatum niet meer dan %s dagen in de toekomst instellen",
|
||||
"Sharing is only allowed with group members" : "Delen kan alleen met groepsleden",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Delen van %s is mislukt, omdat het object al wordt gedeeld met gebruiker %s",
|
||||
"%1$s shared »%2$s« with you" : "%1$s deelde \"%2$s\" met jou",
|
||||
"%1$s shared »%2$s« with you." : "%1$s deelde \"%2$s\" met jou.",
|
||||
"Click the button below to open it." : "Klik de onderstaande button om te openen.",
|
||||
|
|
|
|||
|
|
@ -119,6 +119,7 @@
|
|||
"Expiration date is in the past" : "De vervaldatum ligt in het verleden",
|
||||
"Can’t set expiration date more than %s days in the future" : "Kan de vervaldatum niet meer dan %s dagen in de toekomst instellen",
|
||||
"Sharing is only allowed with group members" : "Delen kan alleen met groepsleden",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Delen van %s is mislukt, omdat het object al wordt gedeeld met gebruiker %s",
|
||||
"%1$s shared »%2$s« with you" : "%1$s deelde \"%2$s\" met jou",
|
||||
"%1$s shared »%2$s« with you." : "%1$s deelde \"%2$s\" met jou.",
|
||||
"Click the button below to open it." : "Klik de onderstaande button om te openen.",
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ OC.L10N.register(
|
|||
"Expiration date is in the past" : "Data ważności już minęła",
|
||||
"Can’t set expiration date more than %s days in the future" : "Nie można ustawić daty ważności na dłuższą niż %s dni",
|
||||
"Sharing is only allowed with group members" : "Udostępnianie jest dozwolone tylko członkom grupy",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Udostępnianie %s nie powiodło się, ponieważ element jest już udostępniony użytkownikowi %s",
|
||||
"%1$s shared »%2$s« with you" : "%1$s udostępnił Tobie »%2$s«",
|
||||
"%1$s shared »%2$s« with you." : "%1$s udostępnił Tobie »%2$s«.",
|
||||
"Click the button below to open it." : "Kliknij przycisk poniżej, aby otworzyć.",
|
||||
|
|
|
|||
|
|
@ -119,6 +119,7 @@
|
|||
"Expiration date is in the past" : "Data ważności już minęła",
|
||||
"Can’t set expiration date more than %s days in the future" : "Nie można ustawić daty ważności na dłuższą niż %s dni",
|
||||
"Sharing is only allowed with group members" : "Udostępnianie jest dozwolone tylko członkom grupy",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "Udostępnianie %s nie powiodło się, ponieważ element jest już udostępniony użytkownikowi %s",
|
||||
"%1$s shared »%2$s« with you" : "%1$s udostępnił Tobie »%2$s«",
|
||||
"%1$s shared »%2$s« with you." : "%1$s udostępnił Tobie »%2$s«.",
|
||||
"Click the button below to open it." : "Kliknij przycisk poniżej, aby otworzyć.",
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ OC.L10N.register(
|
|||
"Expiration date is in the past" : "到期日期已过",
|
||||
"Can’t set expiration date more than %s days in the future" : "无法将过期日期设置为超过 %s 天。",
|
||||
"Sharing is only allowed with group members" : "只允许与群组成员共享",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "共享 %s 失败了，因为该项目已和用户 %s 进行了分享。",
|
||||
"%1$s shared »%2$s« with you" : "%1$s 对您共享了 »%2$s«",
|
||||
"%1$s shared »%2$s« with you." : "%1$s 对您共享了 »%2$s«。",
|
||||
"Click the button below to open it." : "点击下方按钮可打开它。",
|
||||
|
|
|
|||
|
|
@ -119,6 +119,7 @@
|
|||
"Expiration date is in the past" : "到期日期已过",
|
||||
"Can’t set expiration date more than %s days in the future" : "无法将过期日期设置为超过 %s 天。",
|
||||
"Sharing is only allowed with group members" : "只允许与群组成员共享",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "共享 %s 失败了，因为该项目已和用户 %s 进行了分享。",
|
||||
"%1$s shared »%2$s« with you" : "%1$s 对您共享了 »%2$s«",
|
||||
"%1$s shared »%2$s« with you." : "%1$s 对您共享了 »%2$s«。",
|
||||
"Click the button below to open it." : "点击下方按钮可打开它。",
|
||||
|
|
|
|||
|
|
@ -121,6 +121,7 @@ OC.L10N.register(
|
|||
"Expiration date is in the past" : "到期日為過去的日期",
|
||||
"Can’t set expiration date more than %s days in the future" : "到期日不能設定為 %s 天以後的日期",
|
||||
"Sharing is only allowed with group members" : "僅允許在群組成員中共享",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "分享 %s 失敗，此項目已經與用戶 %s 分享",
|
||||
"%1$s shared »%2$s« with you" : "%1$s 與您分享了 %2$s",
|
||||
"%1$s shared »%2$s« with you." : "%1$s 與您分享了 %2$s",
|
||||
"Click the button below to open it." : "點下方連結開啟",
|
||||
|
|
|
|||
|
|
@ -119,6 +119,7 @@
|
|||
"Expiration date is in the past" : "到期日為過去的日期",
|
||||
"Can’t set expiration date more than %s days in the future" : "到期日不能設定為 %s 天以後的日期",
|
||||
"Sharing is only allowed with group members" : "僅允許在群組成員中共享",
|
||||
"Sharing %s failed, because this item is already shared with user %s" : "分享 %s 失敗，此項目已經與用戶 %s 分享",
|
||||
"%1$s shared »%2$s« with you" : "%1$s 與您分享了 %2$s",
|
||||
"%1$s shared »%2$s« with you." : "%1$s 與您分享了 %2$s",
|
||||
"Click the button below to open it." : "點下方連結開啟",
|
||||
|
|
|
|||
Loading…
Reference in New Issue