Before, the file or folder was opened when clicking on the name span,
but not when clicking on the link that contains the name; clicking on
the link highlighted the file and opened the sidebar, just like clicking
on the file size or date. Now clicking on the link opens the file or
folder, so the unit tests that tested clicks on the link were changed to
test clicking on the file size instead.
Signed-off-by: Jan-Christoph Borchardt <hey@jancborchardt.net>
Menu and home are not always visible; home is always visible, but menu
is shown only when needed.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The crumb for the menu was shown like any other crumb when calling
"_showCrumb", but it was also shown when other crumbs were hidden
without taking into account the available width. This caused several
related problems, like the breadcrumbs taking too much space when the
menu was sometimes shown after the rest of the crumbs were adjusted to
the available width, or the menu being shown instead of the last crumb
even if there was room for it when the available width was increased.
Now the menu is always hidden before starting the resizing of the crumbs
to ensure that whether it was previously shown or not does not affect
the result. In a similar way, the menu will no longer be shown by
"_showCrumb", as it is not a regular crumb that has to be shown simply
if there is enough room. The menu is now shown as soon as any other
crumb is hidden; this ensures that the menu width will be taken into
account in further width checks. As when _updateMenu" is called it no
longer needs to take care of showing the menu this fixes the issue
revealed when fixing the test setup in the previous commit.
Finally, this implicitly fixes the failure in the breadcrumbs tests when
run on Firefox, as it was caused by the menu interfering in the
calculations of the other crumbs when increasing the width.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "Shows only items not in the breadcrumb" test was failing when run
on Firefox, but not on PhantomJS. This was caused by the differences in
the starting width between both browsers and an incorrect setup of the
test (the width set for the crumbs was overriden when the breadcrumbs
were rendered again, and the breadcrumb was resized to 300 from an
indeterminate initial width).
Now the crumbs are rendered and then its width, padding and margin are
set to a known value. Then it is resized to 1000px, which ensures that
there will be enough room for all the crumbs and thus the menu will be
hidden, and finally it is resized to 300, which causes the middle crumb
to be hidden and the menu to be shown.
Note, however, that the test now always fails, no matter if it is run on
PhantomJS or on Firefox; if the menu crumb is hidden when "_updateMenu"
is called it will show it, but it will also wrongly try to add the menu
itself to the menu. As the "crumb-id" of the menu crumb is "-1" this
causes the last regular crumb to be added to the menu. This will be
fixed with other related issues in the next commit.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When calculating the total width of the crumbs only its padding was
taken into account; now the margin is too. In a similar way, before
showing a crumb only its width was taken into account; now its padding
and margin are taken into account too.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This ensures that the resize tests do not depend on the values set in
the CSS files.
Note that this change causes a test to fail with Firefox, but not with
PhantomJS. This is due to a difference in the starting width used by
Firefox and by PhantomJS, and it will be fixed in a following commit.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When the parent element of the breadcrumbs was resized to a larger width
and the siblings of the breadcrumbs expanded to fill all the available
width some crumbs could be hidden even if there was enough room for
them. The reason was that the width of the siblings being used to
calculate the available width for the breadcrumbs was the expanded width
of the siblings. Now as many crumbs as possible (that is, fitting in the
parent, no matter the siblings) are first shown so the expanding
siblings are compressed before calculating the available width.
Due to the lack of support for flexboxes in PhantomJS the related unit
test is skipped; it has to be run in other browser, like Firefox.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Other apps could add elements to the controls outside the creatable
actions div (for example, the button to switch to the gallery), so the
widths of all the visible siblings of the breadcrumbs have to be taken
into account in the size calculations.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
There are some differences in width handling between the browsers used
to run the tests, most likely due to their support (or lack of) of
certain CSS features: PhantomJS requires "width" to be set (probably
because it does not handle flex displays and treats it like a block, so
"min-width" does not matter in this case), while Firefox requires
"min-width" to be set (otherwise the children of "#controls" could be
compressed due to its use of flex display and the elements would end
with a different width than the one needed for the tests). Due to all
that the width of the breadcrumb siblings must be specified in the tests
using both "width" and "min-width".
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
There is no need to call "setDirectory" again in resize tests; it is
enough to simply resize them (and isolates them better to just test the
resizing behaviour).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Setting the width of the parent element of the breadcrumbs and then
explicitly calling "_resize" is enough to test the resizing behaviour.
This makes possible to remove the "setMaxWidth" method and its related
code, which was used only for testing purposes.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The new 'Move and copy' operation from #6040 requires UPDATE permissions
on the selected files. However, READ would be sufficient to create a
copy of a file (if not viewed as a public share). For this reason this patch:
- changes the permission of the 'MoveCopy' action to PERMISSION_READ
- changes the label of the action depending on the permissions
- changes the available buttons in the Move/Copy dialog depending on the
permissions.
The same changes are done to the filelist view for bulk actions.
Signed-off-by: Roland Tapken <roland@bitarbeiter.net>
"FileList._updateDetailsView" expects either a file name (as a string)
or a file model (as an "OCA.File.FileInfoModel"), but when called
through "updateInList" an "OC.Files.FileInfo" object was given instead.
As the given attribute was not a model "_updateDetailsView" treated it
as a file name and tried to get the model for that file, which failed
and caused the details view to be emptied.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
All the tests in the "Renaming files" section added the test files,
although those calling "doRename()" added them by setting a path for the
file too. However, the path is ignored in the other tests, so adding the
files can be unified and moved to "beforeEach()".
This would be needed, for example, to show the details view for a file
before calling "doRename()".
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When the favourite icon in the details view is clicked the "Favorite"
action is triggered. However, if the action name given to
"triggerAction" is not found then the "Download" action is triggered
instead. As the "Favorite" action is not available in some file lists
(like "Recents") the "Download" action was executed instead in those
cases, which was a strange behaviour. Now the favourite icon is
hidden if its action is not available.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When an empty area of a file row was clicked and the "Details" action
was executed "fileActions.currentFile" was not guaranteed to be set to
the appropriate object (it depended on the previous actions of the
user), so when it was used by "getCurrentMimeType()" and other
FileActions functions they may not work as expected. Now it is
explicitly set to the appropriate value before its use.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
In the same way that other elements can know when a FileAction is
registered or a default action is set this commit makes possible to be
notified before and after a FileAction is executed.
This is achieved by wrapping the registered action handler in a custom
function that notifies the listeners before and after executing the
handler itself. Due to this approach only FileActions registered through
"registerAction" trigger the events, although that is not a problem as
this is how the actions should be added to the FileActions anyway.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Michael Weimann
Morris Jobke
Jan-Christoph Borchardt
John Molakvoæ (skjnldsv)
Roeland Jago Douma
Abijeet
Julius Härtl
Roeland Jago Douma
Joas Schilling
Daniel Calviño Sánchez
Roland Tapken
Bjoern Schiessle