Commit Graph

77 Commits

Author SHA1 Message Date
John Molakvoæ (skjnldsv) 3d99a9d24e Header acceptance features
Signed-off-by: John Molakvoæ (skjnldsv) <skjnldsv@protonmail.com>
2018-03-09 14:33:22 +01:00
Daniel Calviño Sánchez 15c12eb027 Add acceptance tests for creation of subfolders in public shared folders
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-03-09 03:37:08 +01:00
Daniel Calviño Sánchez 1a2d9a2fdd Extract common "wait for" functions to a helper class
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-03-09 03:37:08 +01:00
Daniel Calviño Sánchez fcd6cf08e0 Generalize file list steps so a specific ancestor can be used
The "FileListContext" provides steps to interact with and check the
behaviour of a file list. However, the "FileListContext" does not know
the right file list ancestor that has to be used by the file list steps,
so until now the file list steps were explicitly wired to the Files app
and they could be used only in that case.

Instead of duplicating the steps with a slightly different name (for
example, "I create a new folder named :folderName in the public shared
folder" instead of "I create a new folder named :folderName") the steps
were generalized; now contexts that "know" that certain file list
ancestor has to be used by the FileListContext steps performed by
certain actor from that point on (until changed again) set it
explicitly. For example, when the current page is the Files app then the
ancestor of the file list is the main view of the current section of the
Files app, but when the current page is a shared link then the ancestor
is set to null (because there will be just one file list, and thus its
ancestor is not relevant to differentiate between instances)

A helper trait, "FileListAncestorSetter", was introduced to reduce the
boilerplate needed to set the file list ancestor from other contexts.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-03-09 03:37:08 +01:00
Daniel Calviño Sánchez 766135cb64 Generalize file list locators so a specific ancestor can be used
The file list is used in other places besides the Files app (for
example, the File sharing app); in those cases the locators for the file
list elements are the same, but not for the ancestor of the file list.
To make possible to reuse the file list locators in those cases too now
they receive the ancestor to use.

Note that the locators for the file actions menu were not using an
ancestor locator because it is expected that there is only one file
actions menu at a time in the whole page; that may change in the future,
but for the time being it is a valid assumption and thus the ancestor
was not added to those locators in this commit.

Although the locators were generalized the steps themselves still use
the "FilesAppContext::currentSectionMainView" locator as ancestor; the
steps will be generalized in a following commit.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-03-09 03:37:08 +01:00
Daniel Calviño Sánchez 10490f2ac3 Store the name of the actor in the Actor object
This is needed to be able to easily use the actor as a key in an array.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-03-09 03:37:08 +01:00
Daniel Calviño Sánchez 49f2ba16f0 Extract file list locators and steps to its own class
Besides the extraction some minor adjustments (sorting locators for file
action menu entries to reflect the order of the menu entries in the UI,
moving parametrized locators like "createMenuItemFor" above the locators
that use them and placing "descendantOf" calls always in a new line)
were made too.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-03-09 03:37:08 +01:00
Daniel Calviño Sánchez c1fa0f8b86 Add automatic handling of NoSuchElement exceptions
NoSuchElement exceptions are sometimes thrown instead of
StaleElementReference exceptions. This can happen when the Selenium2
driver for Mink performs an action on an element through the WebDriver
session instead of directly through the WebDriver element. In that case,
if the element with the given ID does not exist, a NoSuchElement
exception would be thrown instead of a StaleElementReference exception,
so those cases are handled like StaleElementReference exceptions.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-03-08 14:54:01 +01:00
Daniel Calviño Sánchez deb2495f89 Add automatic handling of MoveTargetOutOfBounds exceptions
MoveTargetOutOfBounds exceptions are sometimes thrown instead of
ElementNotVisible exceptions. This can happen when the Selenium2 driver
for Mink moves the cursor on an element using the "moveto" method of the
Webdriver session, for example, before clicking on an element. In that
case, if the element is not visible, "moveto" would throw a
MoveTargetOutOfBounds exception instead of an ElementNotVisible
exception, so those cases are handled like ElementNotVisible exceptions.

Note that MoveTargetOutOfBounds exceptions could be thrown too if the
element was visible but "out of reach"; there is no problem in handling
those cases as if the element was not visible, as the exception will be
thrown again anyway once it is verified that the element is indeed
visible.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-03-08 14:53:15 +01:00
John Molakvoæ (skjnldsv) 2d4896e2a7
fixup! Acceptance fix
Signed-off-by: John Molakvoæ (skjnldsv) <skjnldsv@protonmail.com>
2018-03-01 12:57:00 +01:00
John Molakvoæ (skjnldsv) 484568e995
Acceptance fix
Signed-off-by: John Molakvoæ (skjnldsv) <skjnldsv@protonmail.com>
2018-03-01 10:45:56 +01:00
Roeland Jago Douma 926419e15c
Merge pull request #7600 from nextcloud/new-user-button-to-sidebar
New user button to sidebar
2018-02-28 12:33:30 +01:00
John Molakvoæ (skjnldsv) 907234fde2 Fix acceptance tests
Signed-off-by: John Molakvoæ (skjnldsv) <skjnldsv@protonmail.com>
2018-02-28 11:17:39 +01:00
Julius Härtl fd830b90eb
Fix acceptance test for new menu structure
Signed-off-by: Julius Härtl <jus@bitgrid.net>
2018-02-27 12:25:53 +01:00
Daniel Calviño Sánchez 81fdbc6554 Take into account the comment message when looking for it
Instead of checking that the list contains one comment it is now checked
that a comment with certain message is visible. This makes the step (and
the locator) more reusable in future tests and also simplifies the code.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-02-15 17:48:07 +01:00
Daniel Calviño Sánchez 0a2c98ac89 Adjust timeouts in the step to create a new comment
Depending on the previous steps the new comment field may be already
shown or not when the step to create a new comment is executed.
Therefore, the timeout was increased from 2 to the "standard" 10 seconds
used in other tests.

If the new comment field was found there is no need to use a timeout
when looking for the new comment button; it is either there or not, it
will not appear after some time.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-02-15 17:48:07 +01:00
Daniel Calviño Sánchez 28d5862643 Move locators above step definitions
The locators are moved above the step definitions for consistency with
other context files; besides that I made some minor adjustments for
consistency too in the locator descriptions and identation, and moved
the locators for ".newCommentRow" descendants together.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-02-15 17:48:07 +01:00
Morris Jobke a987f39565
Merge pull request #7650 from rpirritano/master
made small changes to login screen
2018-01-11 13:55:39 +01:00
Robert Pirritano a82c8f58cc
made small changes to login screen
added height back 70px back to footer and removed .htaccess file

Signed-off-by: Robert R Pirritano <rpirritano@gmail.com>
2018-01-11 12:37:47 +01:00
Daniel Calviño Sánchez dab4a70bcf Add acceptance test for renaming a file with the details view open
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2018-01-11 04:30:52 +01:00
Daniel Calviño Sánchez e24a1c51e8 Wait for the shared link to be set in the acceptance tests
When clicking on "Share link" in the "Sharing" tab of the Files app an
input field with the link appears. That input field already exists in
the DOM, although empty, before clicking on "Share link", and when that
is done the proper value is set and then the input field is shown.

In the acceptance tests "getValue()" can return the value of hidden
elements too, so as long as an element exists its value is returned
without waiting for the field to be visible. Due to this if the test
code runs too fast the "I write down the shared link" step could be
executed before the proper value was set, so the shared link got in that
case would be an empty value, and this would lead to failures when the
following steps were executed.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-12-22 09:13:47 +01:00
Daniel Calviño Sánchez 8916735dd3 Add missing timeout multiplier
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-12-22 09:13:47 +01:00
Daniel Calviño Sánchez 37238725d6 Fix typo in callback name
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-12-22 08:57:50 +01:00
Daniel Calviño Sánchez 2ec181e084 Add acceptance test for opening the menu in a public shared link
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-12-19 06:55:47 +01:00
Abijeet 81f34e224c
Allows adding of hex color to the theme-color
Fixes #7158. Adds a # on the color if missing.

Increased maxlength, added hash:true for jscolor, and adding a # if not present on the change event.

Since the input element now allows a hex code, changed values to hexcode.

In addition, added a function to get RGB array from hex or rgb values. Calling it in both methods and using it to perform comparison.

Also changed the way we were determining whether the jscolor component had loaded.

Changed the control to use data-jscolor rather than defining opts in the class.

Signed-off-by: Abijeet <abijeetpatro@gmail.com>
2017-12-08 10:42:41 +01:00
John Molakvoæ (skjnldsv) 15762c103b
Fix acceptance test
Signed-off-by: John Molakvoæ (skjnldsv) <skjnldsv@protonmail.com>
2017-11-08 09:19:33 +01:00
Arthur Schiwon e2805f02aa
Merge branch 'master' into autocomplete-gui 2017-11-01 15:37:29 +01:00
Arthur Schiwon 5b4df0f320
bump acceptance test suite to use php 7.1 image
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
2017-10-31 10:38:54 +01:00
Arthur Schiwon 76c803f0af
add acceptance tests
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
2017-10-28 23:57:35 +02:00
Daniel Calviño Sánchez 065ab6bfff Solve acceptance test failure due to clicks on covered elements
Firefox and Chrome drivers for Selenium refuse to click on an element if
the point to be clicked is covered by a different element, throwing an
UnknownError exception with message "Element is not clickable at point
({x}, {y}). Other element would receive the click: {element}". Although
in general that would be a legit error (as the user would not be able to
click on the element) due to a bad layout, sometimes this can be just a
temporal issue caused by an animation, in which case there would be no
problem once the animation finished and the elements are all in their
final location.

Unfortunately, automatically handling those situations in which the
problem is caused by an animation by just retrying a few times if the
element to be clicked is covered before giving up would probably cause
confusion instead of easing test writing.

The reason is that if the center of the element is covered by another
one the Firefox driver for Selenium tries to click on the corners of the
element instead. The problem is that the coordinates used for the click
are integer values, but Firefox has sub-pixel accuracy, so sometimes
(depending on which corner is not covered and whether the left, top,
width or height properties of the element to be clicked have a decimal
component or not) the clicks silently land on a different HTML element
(and that is with squared borders; with round borders they always land
on a different HTML element. That was partially addressed for Selenium
3.0 by clicking first on the edges, but it would still fail if the
middle point of the edges is covered but not the corners).

It is not possible to fix or even detect all that from the tests (except
maybe with some extreme hacks involving accessing private PHP members
from Mink and bypassing or replacing the standard JavaScript executed by
the Firefox driver with a custom implementation...), so it is not
possible to ensure that clicks during an animation will land on the
right element (in fact it is not possible even on static elements,
although except when the layout is wrong there should be no problem);
sometimes retrying a click when the element is covered would solve the
problem, sometimes it would cause a different element to be clicked (and
sometimes there would be even no retry, as the first click would have
silently landed on a different element than the expected one).

Therefore, a different approach must be used. Instead of trying to
automatically handle clicks during animations the tests must be written
being aware of the problem and thus waiting somehow for the animations
that can cause a problem to end before performing the clicks.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-10-19 01:46:13 +02:00
Daniel Calviño Sánchez 9ff0941c07 Replace inline favorite action with just a favorite icon
This is a preparatory step for a following commit in which the position
of the favorite icon and the checkbox will be swapped; in that new
design the favorite icon is no longer expected to be an action but just
a simple mark on whether the file is favorited or not (the action is
expected to be triggered then only from the file actions menu).

The favorite icon is now fully shown or completely hidden depending on
whether the file is favorited or not. As the icon is just informative
but no longer an action now it does not change when hovered or focus. In
the same way, the alternative text when the file is not favorited now it
is not "Favorite" (an action) but "Not favorited" instead.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-10-19 01:46:13 +02:00
Daniel Calviño Sánchez 0e933ee6b9 Update acceptance tests to favorite files through the file actions menu
Currently a file can be favorited either through the inline action or
through the file actions menu. However, the inline action will be
removed in a following commit and then it will be possible to do it only
through the file actions menu.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-10-19 01:46:13 +02:00
Daniel Calviño Sánchez 0c8627a7ee Add acceptance tests for setting the color in the Theming app
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-08-10 12:37:57 +02:00
Daniel Calviño Sánchez 63004c8ce5 Add getter for the timeout multiplier
In some cases the acceptance tests have to explicitly wait for something
to happen without using the "find" method from the actor; in those cases
the timeout multiplier needs to be taken into account too, so the test
cases must be able to retrieve it from the actor.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-08-10 12:37:56 +02:00
Daniel Calviño Sánchez c37329005e Add option to acceptance test runner to set the Selenium server
By default "127.0.0.1:4444" is used, so nothing needs to be set when the
acceptance tests and the Selenium server share the same network (like
when called by "run.sh").

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-07-20 07:56:51 +02:00
Daniel Calviño Sánchez 2fe8cad710 Add option to acceptance test runner to set the Nextcloud server domain
By default "127.0.0.1" is used, so nothing needs to be set when the
Selenium server and the Nextcloud test server share the same network
(like when called by "run.sh").

Besides passing the domain to the acceptance tests the Nextcloud test
server configuration must be modified to see the given domain as a
trusted domain; otherwise the access would be forbidden.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-07-20 07:54:39 +02:00
Daniel Calviño Sánchez 8e9c12eed9 Make possible to configure the domain for the Nextcloud test server
The NextcloudTestServerLocalHelper started the PHP built-in web server
for the Nextcloud test server at 127.0.0.1; as the Selenium server has
to access the Nextcloud test server they were forced to share the same
network. Now, the domain at which the PHP built-in web server is started
can be specified when the NextcloudTestServerLocalHelper is created,
which removes the need of sharing the same network, as the Selenium
server now can access the Nextcloud test server at an arbitrary domain.
However, by default "127.0.0.1" is still used if no domain is given.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-07-20 07:50:33 +02:00
Daniel Calviño Sánchez b43a74bdcd Add acceptance tests for unselecting items in dropdown for tags
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-07-10 03:38:22 +02:00
Daniel Calviño Sánchez 71b90cdeff Extract app navigation elements to its own context
The app navigation is not exclusive to the Files app but a generic
component used by other apps too, so its locators and steps should be in
its own context.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-07-08 15:36:01 +02:00
Daniel Calviño Sánchez 8deab238cc Fix typo
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-07-08 15:33:03 +02:00
Daniel Calviño Sánchez 6fa5c33af4 Add acceptance tests for sorting of favorite files
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-07-05 14:54:26 +02:00
Arthur Schiwon 6b5bbe1880
try to lower the timeout in an acceptance test
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
2017-06-26 14:42:07 +02:00
Arthur Schiwon cfa5eea902
fix typos and unnecessary white spaces
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
2017-06-26 10:30:42 +02:00
Arthur Schiwon 26ca563545
Fix and extend acceptance tests
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
2017-06-23 12:38:05 +02:00
Daniel Calviño Sánchez 423136d319 Extract duplicated code to a method
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-06-09 03:03:47 +02:00
Daniel Calviño Sánchez be02b3df28 Add acceptance tests for showing the input field for tags
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-06-09 03:02:33 +02:00
Daniel Calviño Sánchez 41412088db Update acceptance tests for issue #4921
Acceptance tests opened the details view by clicking on the middle of
the file row, but due to the changes made in issue #4921 that now opens
the file instead; this commit updates the acceptance tests to open the
details view through the "Details" item in the file actions menu.

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-05-21 14:45:43 +02:00
Daniel Calviño Sánchez 9313c9797f Add automatic handling of common command failures of Mink elements
Commands executed on Mink elements may fail for several reasons.
ElementWrapper is introduced to automatically handle some of those
situations, like StaleElementReference exceptions and ElementNotVisible
exceptions.

StaleElementReference exceptions are thrown when the command is executed
on an element that is no longer attached to the DOM. When that happens
the ElementWrapper finds again the element and executes the command
again on the new element.

ElementNotVisible exceptions are thrown when the command requires the
element to be visible but the element is not. When that happens the
ElementWrapper waits for the element to be visible before executing the
command again.

These changes are totally compatible with the current acceptance tests.
They just make the tests more robust, but they do not change their
behaviour. In fact, this should minimize some of the sporadic failures
in the acceptance tests caused by their concurrent nature with respect
to the web browser executing the commands.

However, the ElementWrapper is not a silver bullet; it handles the most
common situations, but it does not handle every possible scenario. For
example, the acceptance tests would still fail sporadically if an
element can become staled several times in a row (uncommon) or if it
does not become visible before the timeout expires (which could still
happen in a loaded system even if the components under test work right,
but obviously it is not possible to wait indefinitely for them).

Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-05-06 12:37:55 +02:00
Daniel Calviño Sánchez 64f9c56224 Extract element finding to a command object
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-05-06 12:37:55 +02:00
Daniel Calviño Sánchez 7642a4b727 Make internal find methods static
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
2017-05-06 12:37:55 +02:00