having the "cache rename" after the "storage move" caused the target
to get the fileid from the source file, without taking care that the object
is stored under the original file id.
By doing the "cache rename" first, we trigger the "update existing file"
logic while moving the file to the object store and the object gets stored for the
correct file id
Signed-off-by: Robin Appelman <robin@icewind.nl>
With 4152216bd8 these two interfaces got
deprecated with the reasoning that we only need the base PSR interface.
However, there are cases where in Nextcloud you still want to have a
specific container (the one for the app vs the one for the server) when
you either have a container injected or query one from a container.
With a single interface that would not be possible. So it's probably
better if we leave the two interfaces, but only have them extend the PSR
interface. IContainer – with the custom methods – shall still be phased
out, but the two other sub interfaces can stay for tagging purposes.
Tagging means that no methods shall be added.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
The interface method has already been deprecated, but if some code uses
the concrete type instead, the deprecation is not shown (by phpstorm),
so I think it's better to have this method tagged as well.
The "fix" for this deprecation is to simply use `get` instead of
`query`. Right now this will work 100% the same, but the goal is to slim
down the interface and only use what PSR-11 offers.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
Else people might have the feeling this is also doing 2FA. And since it
is only prefered it can be ignored and hacked around.
Once we have proper 2FA with webauthn in one go this probably needs to
be revisted.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
The logger service was always intended to follow the PSR-3 interface.
It's time to embrace this and switch over to the "official" API,
hence this custom interface can be slowly phased out.
With Nextcloud 20 the logger also got support for
* App id filled out automatically
* Exceptions handling (as replacement for logException)
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
Just like for ILogger we should have a version that has the app ID
pre-set for the context (unless overwritten) so that each log entry can
be traced back to the app that produced it.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
Service locators are an anti pattern. These getters just make it more
appealing to do the wrong thing. If you want to locate a service the bad
way, just use the `get` method on a container – it will do the same in
also one line of code.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
This type is not known on the public API, yet we should make sure that
any usage of this class is noticed and migrated as soon as possible.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
"Exception: substr() expects parameter 3 to be int, bool given" can occur on Line 378 $mimePart = substr($icon, 0, strpos($icon, '-'));
This happens, when '-' is not found and strpos returns false instead of an int.
When this occurs, e.g., Activity hangs.
Signed-off-by: lui87kw <lukas.ifflaender@uni-wuerzburg.de>
* We can't just register an alias as the services need the appId to be
injected. if we just register an alias this blows up since the main
container doesn't have the appId.
* Moved the Authtokens over to show the PoC works
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
* Keep the registration context
* Expose the context object for other components
* Ensure registration is only run once
Search providers are migrated for demonstration.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
the php ftp streamwrapper doesn't handle hashes correctly and will break when it tries to enter a path containing a hash.
By filtering out paths containing a hash we can at least stop the external storage from breaking completely
Signed-off-by: Robin Appelman <robin@icewind.nl>
This will allow to do lazy registration here which should allow for
loading less (or at least only when needed!).
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
If we use the owners mount point this results in null. And then the rest
of the checks get called with null. Which doesn't work.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
This translation was done in each call. Over and over and over again.
All while it was probably not used in 99.99999% of the cases. A small
gain. But still.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
It's not used anyways and allowed to manipulate the state of the session. Also removed the code handling this.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
this allows an admin to configure the max trashbin size instead of always relying on the users quota.
The trashbin size can be configured using the `occ trash:size` command and can be set both globally and per-user
Signed-off-by: Robin Appelman <robin@icewind.nl>
This is not required and doesn't allow us to be properly lazy. On top of
it this doesnt allow us to cache the routes (since closures/objects
can't be cached).
This is the first small step into cleaning up the routing we have
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
OC::$WEBROOT can be empty in case if your nextcloud installation has no url prefix. This will result in an empty Location Header.
in other areas OC::$WEBROOT is always used together with an /
The old sharing mechanism isn't working anymore, because it was replaced by Share 2.0. Also it was nowhere used so this removes the code paths and reduces complexity.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
This is like what we have to DI and classes, but for callables.
The motivating factor is to get rid of *service locators* in the `boot`
method of apps as a new pattern is about to emerge where we have lots of
`query` calls on the app or server container in order to fetch some
services.
With this little helper it's possible to call another (public) method
and magically have everything injected.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
while some code paths do wrap the "raw" locking exception into one with a proper path, not all of them do
by adding the proper path to the original exception we ensure that we always have the usefull information in out logs
Signed-off-by: Robin Appelman <robin@icewind.nl>
In general it is good to set them to Lax. But also to give devs more
control over them is not a bad thing.
Helps with #21474
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
My patch at #21461 had a little error in that it exits the method when a
query exception is encountered during the register step of an app. What
we actually want is to continue with the next app and finish the overall
registration procedure.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
Some apps require the composer autoloader from app.php. If we run boot
before including that file, classes and functions from dependencies
won't be found.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
The problem is that despite it's name IGroup::searchDisplayName()
only searches by userid and this is less fixable than changing back to this method here
Signed-off-by: Joas Schilling <coding@schilljs.com>
The S3 client enables this by default and then tries to read
`.aws/config`. This causes `open_basedir` restriction related error for
some setups. So this patch disables the CSM because it's most likely
unused anyway.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
while this scan *should* never be triggered, it's good to have some failsafe to ensure
that the users home contents don't end up getting scanned in the root storage
Signed-off-by: Robin Appelman <robin@icewind.nl>
Some S3 providers need a custom upload part size (500 MB static value in Nextcloud).
Here is a commit to change this value via S3 configuration, instead of using S3_UPLOAD_PART_SIZE constant.
A new parameter is added for an S3 connection : uploadPartSize
Signed-off-by: Florent <florent@coppint.com>
* The parent constructor was not called
* `get_class` does not allow null values in php7.2+
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
When "send password by Talk" was disabled in a mail share it was
possible to keep the same password as before, as it does not pose any
security issue (unlike keeping it when "send password by Talk" is
enabled, as in that case the password was already disclosed by mail).
However, if a mail share is updated but the password is not set again
only the hashed password will be available. In that case it would not
make sense to send the password by mail, so now the password must be
changed when disabling "send password by Talk".
Note that, even if explicitly setting the same password again along with
the "send password by Talk" property would work, this was also prevented
for simplicity.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When "send password by Talk" is enabled in a mail share a new password
must be also set. However, when the passwords of the original and the
new share were compared it was not taken into account that the original
password is now hashed, while the new one is not (unless no new password
was sent, in which case the password of the original share was set in
the new share by the controller, but that was already prevented due to
both passwords being literally the same), so it was possible to set the
same password again.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When "send password by Talk" is enabled in a link share now a non empty
password is enforced.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Right now if you want to get events via the Node API you have to have a
real instance of the Root. Which in turns sets up the whole FS.
We should make sure this is done lazy. Else enabling the preview
generator for example makes you setup the whole FS on each and every
authenticated call.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Simon Spannagel
Robin Appelman
Roeland Jago Douma
Morris Jobke
Nextcloud bot
Christoph Wurst
Joas Schilling
Roeland Jago Douma
Joas Schilling
lui87kw
bladewing
Julius Härtl
Georg Ehrke
Holger Hees
J0WI
Daniel Kesselberg
Christoph Wurst
Kevin Lanni
blizzz
Florent
Daniel Calviño Sánchez