This can be used by pages that do not have the full Nextcloud UI.
So notifications etc do not load there.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
When a password is reste we should make sure that all users are properly
logged in. Pending states should be cleared. For example a session where
the 2FA code is not entered yet should be cleared.
The token is now removed so the session will be killed the next time
this is checked (within 5 minutes).
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
If the remember_login_cookie_lifetime is set to 0 this means we do not
want to use remember me at all. In that case we should also not creatae
a remember me cookie and should create a proper temp token.
Further this specifies that is not 0 the remember me time should always
be larger than the session timeout. Because else the behavior is not
really defined.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
If a user can't authenticate normally (because they have 2FA that is not
available on their devices for example). The redirect that is generated
should be of the proper format.
This means
1. Include the protocol
2. Include the possible subfolder
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
In 2f87fb6b45 this header was introduced. The referenced documentation says:
> When delivered with a response from https://example.com/clear, the following header will cause cookies associated with the origin https://example.com to be cleared, as well as cookies on any origin in the same registered domain (e.g. https://www.example.com/ and https://more.subdomains.example.com/).
This also applies if `https://nextcloud.example.com/` sends the `Clear-Site-Data: "cookies"` header.
This is not the behavior we want at this point!
So I removed the deletion of cookies from the header. This has no effect on the logout process as this header is supported only recently and the logout works in old browsers as well.
Signed-off-by: Patrick Conrad <conrad@iza.org>
Now that we allow enforcing 2 factor auth it make sense if we also allow
and endpoint where the clients can in the background fetch an
apppassword if they were configured before the login flow was present.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
We use the same logic for creating accounts without a password and there the 12h is a bit short. Users don't expect that the signup link needs to be clicked within 12h - 7d should be a more expected behavior.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
When two or more user share the same email address its not possible to
reset password by email. Even when only one account is active.
This pr reduce list of users returned by getByEmail by disabled users.
Signed-off-by: Daniel Kesselberg <mail@danielkesselberg.de>
This is required to not break compatibility with existing consumers of that endpoint like the apps management or the client
Signed-off-by: Julius Härtl <jus@bitgrid.net>
This adds persistence to the Nextcloud server 2FA logic so that the server
knows which 2FA providers are enabled for a specific user at any time, even
when the provider is not available.
The `IStatefulProvider` interface was added as tagging interface for providers
that are compatible with this new API.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
PHPDoc (of the public API) says that this method returns string but it also returns null, which is not allowed in some method calls. This fixes that behaviour and returns an empty string and fixes all code paths that explicitly checked for null to be still compliant.
Found while enabling the strict_typing for lib/private for the PHP7+ migration.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
* introduce a Controller for requests
* introduce result sorting mechanism
* extend Comments to retrieve commentors (actors) in a tree
* add commenters sorter
* add share recipients sorter
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
Any `\OCP\Authentication\IApacheBackend` previously had to implement `getLogoutAttribute` which returns a string.
This string is directly injected into the logout `<a>` tag, so returning something like `href="foo"` would result
in `<a href="foo">`.
This is rather error prone and also in Nextcloud 12 broken as the logout entry has been moved with
054e161eb5 inside the navigation manager where one cannot simply inject attributes.
Thus this feature is broken in Nextcloud 12 which effectively leads to the bug described at nextcloud/user_saml#112,
people cannot logout anymore when using SAML using SLO. Basically in case of SAML you have a SLO url which redirects
you to the IdP and properly logs you out there as well.
Instead of monkey patching the Navigation manager I decided to instead change `\OCP\Authentication\IApacheBackend` to
use `\OCP\Authentication\IApacheBackend::getLogoutUrl` instead where it can return a string with the appropriate logout
URL. Since this functionality is only prominently used in the SAML plugin. Any custom app would need a small change but
I'm not aware of any and there's simply no way to fix this properly otherwise.
Signed-off-by: Lukas Reschke <lukas@statuscode.ch>
* Nextcloud is not properly loaded in the standalone version (especially the theming)
* it is already not listed anymore in the Nginx config (see nextcloud/documentation#392)
* the index.php-free version doesn't support this
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
This implements the basics for the new app-password based authentication flow for our clients.
The current implementation tries to keep it as simple as possible and works the following way:
1. Unauthenticated client opens `/index.php/login/flow`
2. User will be asked whether they want to grant access to the client
3. If accepted the user has the chance to do so using existing App Token or automatically generate an app password.
If the user chooses to use an existing app token then that one will simply be redirected to the `nc://` protocol handler.
While we can improve on that in the future, I think keeping this smaller at the moment has its advantages. Also, in the
near future we have to think about an automatic migration endpoint so there's that anyways :-)
If the user chooses to use the regular login the following happens:
1. A session state token is written to the session
2. User is redirected to the login page
3. If successfully authenticated they will be redirected to a page redirecting to the POST controller
4. The POST controller will check if the CSRF token as well as the state token is correct, if yes the user will be redirected to the `nc://` protocol handler.
This approach is quite simple but also allows to be extended in the future. One could for example allow external websites to consume this authentication endpoint as well.
Signed-off-by: Lukas Reschke <lukas@statuscode.ch>
While the risk is actually quite low because one would already have the user session and could potentially do other havoc it makes sense to throttle here in case of invalid previous password attempts.
Signed-off-by: Lukas Reschke <lukas@statuscode.ch>
This makes the new `@BruteForceProtection` annotation more clever and moves the relevant code into it's own middleware.
Basically you can now set `@BruteForceProtection(action=$key)` as annotation and that will make the controller bruteforce protected. However, the difference to before is that you need to call `$responmse->throttle()` to increase the counter. Before the counter was increased every time which leads to all kind of unexpected problems.
Signed-off-by: Lukas Reschke <lukas@statuscode.ch>
* currently there are two ways to access default values:
OCP\Defaults or OC_Defaults (which is extended by
OCA\Theming\ThemingDefaults)
* our code used a mixture of both of them, which made
it hard to work on theme values
* this extended the public interface with the missing
methods and uses them everywhere to only rely on the
public interface
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
Single user mode basically disables WebDAV, OCS and cron execution. Since
we heavily rely on WebDAV and OCS also in the web UI it's basically useless.
An admin only sees a broken interface and can't even change any settings nor
sees any files. Also sharing is not possible.
As this is at least the case since Nextcloud 9 and we haven't received any
reports for this it seems that this feature is not used at all so I removed it.
The encryption commands now rely on the well tested maintenance mode.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
* try to reuse the old session token for remember me login
* decrypt/encrypt token password and set the session id accordingly
* create remember-me cookies only if checkbox is checked and 2fa solved
* adjust db token cleanup to store remembered tokens longer
* adjust unit tests
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
Roeland Jago Douma
John Molakvoæ (skjnldsv)
Rayn0r
Julius Härtl
Patrick Conrad
Morris Jobke
Christoph Wurst
Evgeny Golyshev
Michael Weimann
blizzz
Denis Mosolov
Daniel Kesselberg
Bjoern Schiessle
Joas Schilling
Robin Appelman
Roeland Jago Douma
Mario Danic
Lukas Reschke
Georg Ehrke
Jan-Christoph Borchardt
Christoph Wurst
Cornelius Kölbel