The "wd_host" parameter of Selenium2 sessions specify the URL used by
the Selenium driver to connect with the Selenium server. Thus, when the
Selenium server is at a different host or port than the default one (for
example, when run on Drone) the "wd_host" parameter must be set for each
of the Selenium2 sessions defined in "behat.yml".
The "BEHAT_PARAMS" environment variable, which extends the "behat.yml"
configuration file, was used for that. However, this required adding to
the "BEHAT_PARAMS" in "run-local.sh" each new session added to
"behat.yml", including those added in the acceptance tests of apps.
To address that limitation, this commit introduces a simulated variable,
"selenium.server"; just before the acceptance tests are run the
"selenium.server" variable in the "wd_host" parameter is replaced in the
"behat.yml" file used by the acceptance tests. Note that the file that
is modified is the one inside the Docker container used to run the
acceptance tests, so the original file is not touched.
Note that a simulated variable is needed because Behat does not support
overridding nor setting configuration parameters with environment
variables.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Before, the acceptance tests checked the header colour just once, as the
header colour was immediately changed once the new theming colour was
saved. This is no longer the case, as currently a transition is used to
change between the original colour and the new one, so now the
acceptance tests check repeteadly for the expected header colour until
it matches or the timeout expires.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Although in the case of the acceptance tests for the server it is not
strictly needed it was modified for consistency with the configuration
used for the acceptance tests in apps.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Due to a bug in the Mink Extension for Behat it is not possible to use
the "paths.base" parameter in the path to the custom Firefox profile.
"paths.base" is a special parameter in the Behat configuration that
refers to the directory in which "behat.yml" is stored. This comes in
very handy to set the path to custom Firefox profiles in the acceptance
tests for apps, as even if the "behat.yml" file belongs to an app its
paths are relative to the directory in which the tests are run, that is,
the "tests/acceptance" directory of the server.
Until the bug is fixed, just before the acceptance tests are run the
"paths.base" parameter in the path to the custom Firefox profile is
replaced by its value in the "behat.yml" file used by the acceptance
tests. Note that the file that is modified is the one inside the Docker
container used to run the acceptance tests, so the original file is not
touched.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The acceptance tests are currently run on Firefox 47; in that version
the CSS grid support was not enabled by default, but it could be enabled
through a setting in the Firefox profile.
By default Selenium uses a clean Firefox profile when a new session is
started, but it also allows the customization of the profile through a
zipped "user.js" file. The contents of that file have to be provided in
the "firefox_profile" capability when the Firefox session is created.
In the Mink extension for Behat several Mink sessions can be defined in
the "behat.yml" file. Each Mink session uses a different browser session
in Selenium, and each of those browser sessions is initialized with the
capabilities provided in the "behat.yml" file.
From the point of view of the acceptance tests each Mink session is an
actor, so different actors can use different browsers with different
capabilities.
Due to all this a new actor was introduced, "Rubeus", who uses a Firefox
browser that has CSS grid support; this actor is meant to be used only
in those acceptance tests that require proper support for CSS grids.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
For consistency with the helper for the Apache web server the helper for
the PHP built-in web server was renamed too.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The default and only helper to run acceptance tests run them on the PHP
built-in web server. This commit introduces a new helper that can be
used to run them on an Apache web server instead.
This helper is meant to be used by the acceptance tests of apps that
require a multi-threaded web server to run (like Talk, due to its use of
long polling). To use the helper it is only needed to set it in the
Behat configuration for the acceptance tests of the app, as explained in
the "NextcloudTestServerContext" documentation.
It is assumed that the acceptance tests are run using the default setup,
and therefore inside a Docker container based on the image for
acceptance tests from Nextcloud. Due to that the helper is expected to
have root permissions, and thus it starts and stops the Apache web
server directly using "service start/stop apache2". In the same way it
also restores the owner and group for "apps", "config" and "data" to
"www-data", as it is the user that Apache sub-processes are run as.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Before, the domain was automatically added assuming that the
NextcloudTestServerContext had no parameters defined in the Behat
configuration. However, in order to use a helper for Apache it would
need to be specified in the configuration with something like:
- NextcloudTestServerContext:
nextcloudTestServerHelper: NextcloudTestServerLocalApacheHelper
The substitution now works both when a helper is specified and when it
is not; note, however, that providing custom parameters to the helper is
not supported, although they are not needed anyway so it is not really a
problem.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Apache sub-processes are run as the www-data user, and they need to be
able to write to the "apps", "config" and "data" directories, so they
have to belong to that user, and therefore the Nextcloud server has to
be installed and configured too as the www-data user. The PHP built-in
web server will still be run as the root user, but in that case the
owner of those directories makes no difference, so this is compatible
with both cases.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The Docker image for acceptance tests provides support for both the PHP
built-in web server and the Apache web server; the acceptance tests for
the server are run on the PHP built-in web server, but the acceptance
tests for some apps will have to be run on the Apache web server (for
example, Talk, as it uses long polling), so a Docker image to support
both cases has to be used in "run.sh". ".drone.yml" was just updated for
consistency, although it was not really needed.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When the acceptance tests were run they were always loaded from the
"tests/acceptance" directory of the Nextcloud server. Now it is possible
to set the directory used to look for the Behat configuration and the
Nextcloud installation script, which makes possible to run acceptance
tests for the apps too instead of only for the server (although if no
directory is explicitly given the tests for the server are the ones
run).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
In order to autoload the server context classes the "bootstrap"
directory was explicitly listed in Behat autoload configuration. This is
fine in the configuration of acceptance tests for the server, but it
would force the configuration of acceptance tests for the apps to
explicitly include the path for the server context classes to be able to
use them (for example, for the login step).
Besides with its own configuration Behat also supports autoloading
classes using Composer, so now context classes are autoloaded using
Composer instead; thanks to this the server context classes are
autoloaded also in the acceptance tests for apps without any explicit
configuration in them.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "FileListContext" provides steps to interact with and check the
behaviour of a file list. However, the "FileListContext" does not know
the right file list ancestor that has to be used by the file list steps,
so until now the file list steps were explicitly wired to the Files app
and they could be used only in that case.
Instead of duplicating the steps with a slightly different name (for
example, "I create a new folder named :folderName in the public shared
folder" instead of "I create a new folder named :folderName") the steps
were generalized; now contexts that "know" that certain file list
ancestor has to be used by the FileListContext steps performed by
certain actor from that point on (until changed again) set it
explicitly. For example, when the current page is the Files app then the
ancestor of the file list is the main view of the current section of the
Files app, but when the current page is a shared link then the ancestor
is set to null (because there will be just one file list, and thus its
ancestor is not relevant to differentiate between instances)
A helper trait, "FileListAncestorSetter", was introduced to reduce the
boilerplate needed to set the file list ancestor from other contexts.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The file list is used in other places besides the Files app (for
example, the File sharing app); in those cases the locators for the file
list elements are the same, but not for the ancestor of the file list.
To make possible to reuse the file list locators in those cases too now
they receive the ancestor to use.
Note that the locators for the file actions menu were not using an
ancestor locator because it is expected that there is only one file
actions menu at a time in the whole page; that may change in the future,
but for the time being it is a valid assumption and thus the ancestor
was not added to those locators in this commit.
Although the locators were generalized the steps themselves still use
the "FilesAppContext::currentSectionMainView" locator as ancestor; the
steps will be generalized in a following commit.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Besides the extraction some minor adjustments (sorting locators for file
action menu entries to reflect the order of the menu entries in the UI,
moving parametrized locators like "createMenuItemFor" above the locators
that use them and placing "descendantOf" calls always in a new line)
were made too.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
NoSuchElement exceptions are sometimes thrown instead of
StaleElementReference exceptions. This can happen when the Selenium2
driver for Mink performs an action on an element through the WebDriver
session instead of directly through the WebDriver element. In that case,
if the element with the given ID does not exist, a NoSuchElement
exception would be thrown instead of a StaleElementReference exception,
so those cases are handled like StaleElementReference exceptions.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
MoveTargetOutOfBounds exceptions are sometimes thrown instead of
ElementNotVisible exceptions. This can happen when the Selenium2 driver
for Mink moves the cursor on an element using the "moveto" method of the
Webdriver session, for example, before clicking on an element. In that
case, if the element is not visible, "moveto" would throw a
MoveTargetOutOfBounds exception instead of an ElementNotVisible
exception, so those cases are handled like ElementNotVisible exceptions.
Note that MoveTargetOutOfBounds exceptions could be thrown too if the
element was visible but "out of reach"; there is no problem in handling
those cases as if the element was not visible, as the exception will be
thrown again anyway once it is verified that the element is indeed
visible.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Instead of checking that the list contains one comment it is now checked
that a comment with certain message is visible. This makes the step (and
the locator) more reusable in future tests and also simplifies the code.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Depending on the previous steps the new comment field may be already
shown or not when the step to create a new comment is executed.
Therefore, the timeout was increased from 2 to the "standard" 10 seconds
used in other tests.
If the new comment field was found there is no need to use a timeout
when looking for the new comment button; it is either there or not, it
will not appear after some time.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The locators are moved above the step definitions for consistency with
other context files; besides that I made some minor adjustments for
consistency too in the locator descriptions and identation, and moved
the locators for ".newCommentRow" descendants together.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When clicking on "Share link" in the "Sharing" tab of the Files app an
input field with the link appears. That input field already exists in
the DOM, although empty, before clicking on "Share link", and when that
is done the proper value is set and then the input field is shown.
In the acceptance tests "getValue()" can return the value of hidden
elements too, so as long as an element exists its value is returned
without waiting for the field to be visible. Due to this if the test
code runs too fast the "I write down the shared link" step could be
executed before the proper value was set, so the shared link got in that
case would be an empty value, and this would lead to failures when the
following steps were executed.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Fixes#7158. Adds a # on the color if missing.
Increased maxlength, added hash:true for jscolor, and adding a # if not present on the change event.
Since the input element now allows a hex code, changed values to hexcode.
In addition, added a function to get RGB array from hex or rgb values. Calling it in both methods and using it to perform comparison.
Also changed the way we were determining whether the jscolor component had loaded.
Changed the control to use data-jscolor rather than defining opts in the class.
Signed-off-by: Abijeet <abijeetpatro@gmail.com>
Firefox and Chrome drivers for Selenium refuse to click on an element if
the point to be clicked is covered by a different element, throwing an
UnknownError exception with message "Element is not clickable at point
({x}, {y}). Other element would receive the click: {element}". Although
in general that would be a legit error (as the user would not be able to
click on the element) due to a bad layout, sometimes this can be just a
temporal issue caused by an animation, in which case there would be no
problem once the animation finished and the elements are all in their
final location.
Unfortunately, automatically handling those situations in which the
problem is caused by an animation by just retrying a few times if the
element to be clicked is covered before giving up would probably cause
confusion instead of easing test writing.
The reason is that if the center of the element is covered by another
one the Firefox driver for Selenium tries to click on the corners of the
element instead. The problem is that the coordinates used for the click
are integer values, but Firefox has sub-pixel accuracy, so sometimes
(depending on which corner is not covered and whether the left, top,
width or height properties of the element to be clicked have a decimal
component or not) the clicks silently land on a different HTML element
(and that is with squared borders; with round borders they always land
on a different HTML element. That was partially addressed for Selenium
3.0 by clicking first on the edges, but it would still fail if the
middle point of the edges is covered but not the corners).
It is not possible to fix or even detect all that from the tests (except
maybe with some extreme hacks involving accessing private PHP members
from Mink and bypassing or replacing the standard JavaScript executed by
the Firefox driver with a custom implementation...), so it is not
possible to ensure that clicks during an animation will land on the
right element (in fact it is not possible even on static elements,
although except when the layout is wrong there should be no problem);
sometimes retrying a click when the element is covered would solve the
problem, sometimes it would cause a different element to be clicked (and
sometimes there would be even no retry, as the first click would have
silently landed on a different element than the expected one).
Therefore, a different approach must be used. Instead of trying to
automatically handle clicks during animations the tests must be written
being aware of the problem and thus waiting somehow for the animations
that can cause a problem to end before performing the clicks.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This is a preparatory step for a following commit in which the position
of the favorite icon and the checkbox will be swapped; in that new
design the favorite icon is no longer expected to be an action but just
a simple mark on whether the file is favorited or not (the action is
expected to be triggered then only from the file actions menu).
The favorite icon is now fully shown or completely hidden depending on
whether the file is favorited or not. As the icon is just informative
but no longer an action now it does not change when hovered or focus. In
the same way, the alternative text when the file is not favorited now it
is not "Favorite" (an action) but "Not favorited" instead.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Currently a file can be favorited either through the inline action or
through the file actions menu. However, the inline action will be
removed in a following commit and then it will be possible to do it only
through the file actions menu.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
In some cases the acceptance tests have to explicitly wait for something
to happen without using the "find" method from the actor; in those cases
the timeout multiplier needs to be taken into account too, so the test
cases must be able to retrieve it from the actor.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
By default "127.0.0.1:4444" is used, so nothing needs to be set when the
acceptance tests and the Selenium server share the same network (like
when called by "run.sh").
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
By default "127.0.0.1" is used, so nothing needs to be set when the
Selenium server and the Nextcloud test server share the same network
(like when called by "run.sh").
Besides passing the domain to the acceptance tests the Nextcloud test
server configuration must be modified to see the given domain as a
trusted domain; otherwise the access would be forbidden.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The NextcloudTestServerLocalHelper started the PHP built-in web server
for the Nextcloud test server at 127.0.0.1; as the Selenium server has
to access the Nextcloud test server they were forced to share the same
network. Now, the domain at which the PHP built-in web server is started
can be specified when the NextcloudTestServerLocalHelper is created,
which removes the need of sharing the same network, as the Selenium
server now can access the Nextcloud test server at an arbitrary domain.
However, by default "127.0.0.1" is still used if no domain is given.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The app navigation is not exclusive to the Files app but a generic
component used by other apps too, so its locators and steps should be in
its own context.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Acceptance tests opened the details view by clicking on the middle of
the file row, but due to the changes made in issue #4921 that now opens
the file instead; this commit updates the acceptance tests to open the
details view through the "Details" item in the file actions menu.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Commands executed on Mink elements may fail for several reasons.
ElementWrapper is introduced to automatically handle some of those
situations, like StaleElementReference exceptions and ElementNotVisible
exceptions.
StaleElementReference exceptions are thrown when the command is executed
on an element that is no longer attached to the DOM. When that happens
the ElementWrapper finds again the element and executes the command
again on the new element.
ElementNotVisible exceptions are thrown when the command requires the
element to be visible but the element is not. When that happens the
ElementWrapper waits for the element to be visible before executing the
command again.
These changes are totally compatible with the current acceptance tests.
They just make the tests more robust, but they do not change their
behaviour. In fact, this should minimize some of the sporadic failures
in the acceptance tests caused by their concurrent nature with respect
to the web browser executing the commands.
However, the ElementWrapper is not a silver bullet; it handles the most
common situations, but it does not handle every possible scenario. For
example, the acceptance tests would still fail sporadically if an
element can become staled several times in a row (uncommon) or if it
does not become visible before the timeout expires (which could still
happen in a loaded system even if the components under test work right,
but obviously it is not possible to wait indefinitely for them).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Starting a session for an Actor can fail, typically, due to a timeout
connecting with the web browser. Now if the session fails to start it
will be tried again up to "actorTimeoutMultiplier" times in total before
giving up.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The timeout passed to the "find" method was multiplied by the
"findTimeoutMultiplier" attribute. However, as "find" used
"findAncestor" and "findAncestor", in turn, used "find" itself the
timeout was increased exponentially for ancestor elements. Now "find"
was split in "find" and "findInternal"; the first method is the public
one and modifies the given parameters as needed and then calls the
second method, private, that performs the find itself.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "named" Mink selector first tries to find an exact match for its
locator and then, if not found, tries to find a partial match. Besides
other harder to track problems (see comment in the commit in which the
"content" locator was removed), this could cause, for example, finding
an action link titled "Favorited" when looking for the action link
titled "Favorite" (that is, one that conveys the opposite state to the
one found).
Although currently all the acceptance tests are compatible with both the
"named" and the "named_exact" Mink selectors the predefined locators are
modified to use the "named_exact" Mink selector to make them more
future-proof; the "named" Mink selector can still be used if needed
through the "customSelector" method in the builder object.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "content" locator uses the "named" Mink selector and the "content"
Mink locator to find the element. The "named" Mink first tries to find
the elements whose content match exactly the given content but, if none
is found, then it tries to find elements that just contain the given
content.
This behaviour can lead to hard to track issues. Finding the exact match
and, if not found, finding the partial match is done in quick
succession. In most cases, when looking for an exact match the element
is already there, it is returned, and everything works as expected. Or
it may not be there, but then it is not there either when finding the
partial match, so no element is returned, and everything works as
expected (that is, the actor tries to find again the element after some
time).
However, it can also happen that when looking for an exact match there
is no element yet, but it appears after trying to find the exact match
but before trying to find the partial match. In that situation the
desired element would be returned along with its ancestors. However, as
only the first found element is taken into account and the ancestors
would appear first the find action would be successful, but the returned
element would not be the expected one. This is highly unlikely, yet
possible, and can cause sporadic failures in acceptance tests that,
apparently, work as expected.
Using a "named_exact" Mink selector instead of the "named" Mink selector
does not provide the desired behaviour in most cases either. As it finds
any element whose content matches exactly the given content, looking for
"Hello world" in "<div><p><a>Hello world</a></p></div>" would match the
"div", "p" and "a" elements; in that situation the "div" element would
be the one returned, when typically the "a" element would be the
expected one.
As it is error prone and easily replaceable by more robust locators the
"content" locator was removed from the predefined ones (although it can
still be used if needed through the "customSelector" method in the
builder object).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The data storage (the "notebook") is shared between all the actors, so
the data can be stored and retrieved between different steps by any
actor in the same scenario.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
As requested by Morris Jobke, the passwords in the acceptance tests were
modified to make them valid both for a clean Nextcloud server and one
with the password_policy app enabled.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This tests whether a user can see navigation entries after enabling
apps. This includes the app's group restriction.
This currently expects that a group "group1" exists until we have code
to auto-generate groups.
This commit also provides a utility function
Page.multiselectSetSelection() to make it possible to select entries
inside a multiselect.
Daniel Calviño Sánchez
Roeland Jago Douma
John Molakvoæ (skjnldsv)
Roeland Jago Douma
Julius Härtl
Morris Jobke
Robert Pirritano
Abijeet
Arthur Schiwon
Thomas Müller
Jan-Christoph Borchardt
Vincent Petry
Felix Böhm