nextcloud/build/stubs/intl.php

6847 lines
244 KiB
PHP
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?php
// Start of intl v.1.1.0
class Collator {
const DEFAULT_VALUE = -1;
const PRIMARY = 0;
const SECONDARY = 1;
const TERTIARY = 2;
const DEFAULT_STRENGTH = 2;
const QUATERNARY = 3;
const IDENTICAL = 15;
const OFF = 16;
const ON = 17;
const SHIFTED = 20;
const NON_IGNORABLE = 21;
const LOWER_FIRST = 24;
const UPPER_FIRST = 25;
/**
* <p>
* Sort strings with different accents from the back of the string. This
* attribute is automatically set to
* On
* for the French locales and a few others. Users normally would not need
* to explicitly set this attribute. There is a string comparison
* performance cost when it is set On,
* but sort key length is unaffected. Possible values are:
* <b>Collator::ON</b>
* <b>Collator::OFF</b>(default)
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* <p>
* FRENCH_COLLATION rules
* <p>
* F=OFF cote &lt; coté &lt; côte &lt; côté
* F=ON cote &lt; côte &lt; coté &lt; côté
* </p>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const FRENCH_COLLATION = 0;
/**
* <p>
* The Alternate attribute is used to control the handling of the so called
* variable characters in the UCA: whitespace, punctuation and symbols. If
* Alternate is set to NonIgnorable
* (N), then differences among these characters are of the same importance
* as differences among letters. If Alternate is set to
* Shifted
* (S), then these characters are of only minor importance. The
* Shifted value is often used in combination with
* Strength
* set to Quaternary. In such a case, whitespace, punctuation, and symbols
* are considered when comparing strings, but only if all other aspects of
* the strings (base letters, accents, and case) are identical. If
* Alternate is not set to Shifted, then there is no difference between a
* Strength of 3 and a Strength of 4. For more information and examples,
* see Variable_Weighting in the
* UCA.
* The reason the Alternate values are not simply
* On and Off
* is that additional Alternate values may be added in the future. The UCA
* option Blanked is expressed with Strength set to 3, and Alternate set to
* Shifted. The default for most locales is NonIgnorable. If Shifted is
* selected, it may be slower if there are many strings that are the same
* except for punctuation; sort key length will not be affected unless the
* strength level is also increased.
* </p>
* <p>
* Possible values are:
* <b>Collator::NON_IGNORABLE</b>(default)
* <b>Collator::SHIFTED</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* <p>
* ALTERNATE_HANDLING rules
* <p>
* S=3, A=N di Silva &lt; Di Silva &lt; diSilva &lt; U.S.A. &lt; USA
* S=3, A=S di Silva = diSilva &lt; Di Silva &lt; U.S.A. = USA
* S=4, A=S di Silva &lt; diSilva &lt; Di Silva &lt; U.S.A. &lt; USA
* </p>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const ALTERNATE_HANDLING = 1;
/**
* <p>
* The Case_First attribute is used to control whether uppercase letters
* come before lowercase letters or vice versa, in the absence of other
* differences in the strings. The possible values are
* Uppercase_First
* (U) and Lowercase_First
* (L), plus the standard Default
* and Off.
* There is almost no difference between the Off and Lowercase_First
* options in terms of results, so typically users will not use
* Lowercase_First: only Off or Uppercase_First. (People interested in the
* detailed differences between X and L should consult the Collation
* Customization). Specifying either L or U won't affect string comparison
* performance, but will affect the sort key length.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::LOWER_FIRST</b>
* <b>Collator::UPPER_FIRST</b>
* <b>Collator:DEFAULT</b>
* </p>
* <p>
* CASE_FIRST rules
* <p>
* C=X or C=L "china" &lt; "China" &lt; "denmark" &lt; "Denmark"
* C=U "China" &lt; "china" &lt; "Denmark" &lt; "denmark"
* </p>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const CASE_FIRST = 2;
/**
* <p>
* The Case_Level attribute is used when ignoring accents but not case. In
* such a situation, set Strength to be Primary,
* and Case_Level to be On.
* In most locales, this setting is Off by default. There is a small
* string comparison performance and sort key impact if this attribute is
* set to be On.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::ON</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* <p>
* CASE_LEVEL rules
* <p>
* S=1, E=X role = Role = rôle
* S=1, E=O role = rôle &lt; Role
* </p>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const CASE_LEVEL = 3;
/**
* <p>
* The Normalization setting determines whether text is thoroughly
* normalized or not in comparison. Even if the setting is off (which is
* the default for many locales), text as represented in common usage will
* compare correctly (for details, see UTN #5). Only if the accent marks
* are in noncanonical order will there be a problem. If the setting is
* On,
* then the best results are guaranteed for all possible text input.
* There is a medium string comparison performance cost if this attribute
* is On,
* depending on the frequency of sequences that require normalization.
* There is no significant effect on sort key length. If the input text is
* known to be in NFD or NFKD normalization forms, there is no need to
* enable this Normalization option.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::ON</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const NORMALIZATION_MODE = 4;
/**
* <p>
* The ICU Collation Service supports many levels of comparison (named
* "Levels", but also known as "Strengths"). Having these categories
* enables ICU to sort strings precisely according to local conventions.
* However, by allowing the levels to be selectively employed, searching
* for a string in text can be performed with various matching conditions.
* For more detailed information, see
* <b>collator_set_strength</b> chapter.
* </p>
* <p>
* Possible values are:
* <b>Collator::PRIMARY</b>
* <b>Collator::SECONDARY</b>
* <b>Collator::TERTIARY</b>(<default)
* <b>Collator::QUATERNARY</b>
* <b>Collator::IDENTICAL</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const STRENGTH = 5;
/**
* <p>
* Compatibility with JIS x 4061 requires the introduction of an additional
* level to distinguish Hiragana and Katakana characters. If compatibility
* with that standard is required, then this attribute should be set
* On,
* and the strength set to Quaternary. This will affect sort key length
* and string comparison string comparison performance.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::ON</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const HIRAGANA_QUATERNARY_MODE = 6;
/**
* <p>
* When turned on, this attribute generates a collation key for the numeric
* value of substrings of digits. This is a way to get '100' to sort AFTER
* '2'.
* </p>
* <p>
* Possible values are:
* <b>Collator::OFF</b>(default)
* <b>Collator::ON</b>
* <b>Collator::DEFAULT_VALUE</b>
* </p>
* @link https://php.net/manual/en/intl.collator-constants.php
*/
const NUMERIC_COLLATION = 7;
const SORT_REGULAR = 0;
const SORT_STRING = 1;
const SORT_NUMERIC = 2;
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a collator
* @link https://php.net/manual/en/collator.construct.php
* @param string $locale
*/
public function __construct($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a collator
* @link https://php.net/manual/en/collator.create.php
* @param string $locale <p>
* The locale containing the required collation rules. Special values for
* locales can be passed in - if null is passed for the locale, the
* default locale collation rules will be used. If empty string ("") or
* "root" are passed, UCA rules will be used.
* </p>
* @return Collator Return new instance of <b>Collator</b> object, or <b>NULL</b>
* on error.
*/
public static function create($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Compare two Unicode strings
* @link https://php.net/manual/en/collator.compare.php
* @param string $str1 <p>
* The first string to compare.
* </p>
* @param string $str2 <p>
* The second string to compare.
* </p>
* @return int Return comparison result:</p>
* <p>
* <p>
* 1 if <i>str1</i> is greater than
* <i>str2</i> ;
* </p>
* <p>
* 0 if <i>str1</i> is equal to
* <i>str2</i>;
* </p>
* <p>
* -1 if <i>str1</i> is less than
* <i>str2</i> .
* </p>
* On error
* boolean
* <b>FALSE</b>
* is returned.
*/
public function compare($str1, $str2) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array using specified collator
* @link https://php.net/manual/en/collator.sort.php
* @param array $arr <p>
* Array of strings to sort.
* </p>
* @param int $sort_flag [optional] <p>
* Optional sorting type, one of the following:
* </p>
* <p>
* <p>
* <b>Collator::SORT_REGULAR</b>
* - compare items normally (don't change types)
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function sort(array &$arr, $sort_flag = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array using specified collator and sort keys
* @link https://php.net/manual/en/collator.sortwithsortkeys.php
* @param array $arr <p>Array of strings to sort</p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function sortWithSortKeys(array &$arr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array maintaining index association
* @link https://php.net/manual/en/collator.asort.php
* @param array $arr <p>Array of strings to sort.</p>
* @param int $sort_flag [optional] <p>
* Optional sorting type, one of the following:
* <p>
* <b>Collator::SORT_REGULAR</b>
* - compare items normally (don't change types)
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function asort(array &$arr, $sort_flag = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get collation attribute value
* @link https://php.net/manual/en/collator.getattribute.php
* @param int $attr <p>
* Attribute to get value for.
* </p>
* @return int|false Attribute value, or boolean <b>FALSE</b> on error.
*/
public function getAttribute($attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set collation attribute
* @link https://php.net/manual/en/collator.setattribute.php
* @param int $attr <p>Attribute.</p>
* @param int $val <p>
* Attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setAttribute($attr, $val) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get current collation strength
* @link https://php.net/manual/en/collator.getstrength.php
* @return int|false current collation strength, or boolean <b>FALSE</b> on error.
*/
public function getStrength() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set collation strength
* @link https://php.net/manual/en/collator.setstrength.php
* @param int $strength <p>Strength to set.</p>
* <p>
* Possible values are:
* <p>
* <b>Collator::PRIMARY</b>
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setStrength($strength) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale name of the collator
* @link https://php.net/manual/en/collator.getlocale.php
* @param int $type [optional] <p>
* You can choose between valid and actual locale (
* <b>Locale::VALID_LOCALE</b> and
* <b>Locale::ACTUAL_LOCALE</b>,
* respectively). The default is the actual locale.
* </p>
* @return string Real locale name from which the collation data comes. If the collator was
* instantiated from rules or an error occurred, returns
* boolean <b>FALSE</b>.
*/
public function getLocale($type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get collator's last error code
* @link https://php.net/manual/en/collator.geterrorcode.php
* @return int Error code returned by the last Collator API function call.
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get text for collator's last error code
* @link https://php.net/manual/en/collator.geterrormessage.php
* @return string Description of an error occurred in the last Collator API function call.
*/
public function getErrorMessage() { }
/**
* (No version information available, might only be in SVN)<br/>
* Get sorting key for a string
* @link https://php.net/manual/en/collator.getsortkey.php
* @param string $str <p>
* The string to produce the key from.
* </p>
* @return string the collation key for the string. Collation keys can be compared directly instead of strings.
*/
public function getSortKey($str) { }
}
class NumberFormatter {
/**
* Decimal format defined by pattern
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PATTERN_DECIMAL = 0;
/**
* Decimal format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DECIMAL = 1;
/**
* Currency format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const CURRENCY = 2;
/**
* Percent format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PERCENT = 3;
/**
* Scientific format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SCIENTIFIC = 4;
/**
* Spellout rule-based format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SPELLOUT = 5;
/**
* Ordinal rule-based format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ORDINAL = 6;
/**
* Duration rule-based format
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DURATION = 7;
/**
* Rule-based format defined by pattern
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PATTERN_RULEBASED = 9;
/**
* Alias for PATTERN_DECIMAL
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const IGNORE = 0;
/**
* Default format for the locale
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DEFAULT_STYLE = 1;
/**
* Rounding mode to round towards positive infinity.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_CEILING = 0;
/**
* Rounding mode to round towards negative infinity.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_FLOOR = 1;
/**
* Rounding mode to round towards zero.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_DOWN = 2;
/**
* Rounding mode to round away from zero.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_UP = 3;
/**
* Rounding mode to round towards the "nearest neighbor" unless both
* neighbors are equidistant, in which case, round towards the even
* neighbor.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_HALFEVEN = 4;
/**
* Rounding mode to round towards "nearest neighbor" unless both neighbors
* are equidistant, in which case round down.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_HALFDOWN = 5;
/**
* Rounding mode to round towards "nearest neighbor" unless both neighbors
* are equidistant, in which case round up.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUND_HALFUP = 6;
/**
* Pad characters inserted before the prefix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_BEFORE_PREFIX = 0;
/**
* Pad characters inserted after the prefix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_AFTER_PREFIX = 1;
/**
* Pad characters inserted before the suffix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_BEFORE_SUFFIX = 2;
/**
* Pad characters inserted after the suffix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_AFTER_SUFFIX = 3;
/**
* Parse integers only.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PARSE_INT_ONLY = 0;
/**
* Use grouping separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const GROUPING_USED = 1;
/**
* Always show decimal point.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DECIMAL_ALWAYS_SHOWN = 2;
/**
* Maximum integer digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MAX_INTEGER_DIGITS = 3;
/**
* Minimum integer digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MIN_INTEGER_DIGITS = 4;
/**
* Integer digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const INTEGER_DIGITS = 5;
/**
* Maximum fraction digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MAX_FRACTION_DIGITS = 6;
/**
* Minimum fraction digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MIN_FRACTION_DIGITS = 7;
/**
* Fraction digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const FRACTION_DIGITS = 8;
/**
* Multiplier.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MULTIPLIER = 9;
/**
* Grouping size.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const GROUPING_SIZE = 10;
/**
* Rounding Mode.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUNDING_MODE = 11;
/**
* Rounding increment.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ROUNDING_INCREMENT = 12;
/**
* The width to which the output of format() is padded.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const FORMAT_WIDTH = 13;
/**
* The position at which padding will take place. See pad position
* constants for possible argument values.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PADDING_POSITION = 14;
/**
* Secondary grouping size.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SECONDARY_GROUPING_SIZE = 15;
/**
* Use significant digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SIGNIFICANT_DIGITS_USED = 16;
/**
* Minimum significant digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MIN_SIGNIFICANT_DIGITS = 17;
/**
* Maximum significant digits.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MAX_SIGNIFICANT_DIGITS = 18;
/**
* Lenient parse mode used by rule-based formats.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const LENIENT_PARSE = 19;
/**
* Positive prefix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const POSITIVE_PREFIX = 0;
/**
* Positive suffix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const POSITIVE_SUFFIX = 1;
/**
* Negative prefix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const NEGATIVE_PREFIX = 2;
/**
* Negative suffix.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const NEGATIVE_SUFFIX = 3;
/**
* The character used to pad to the format width.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PADDING_CHARACTER = 4;
/**
* The ISO currency code.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const CURRENCY_CODE = 5;
/**
* The default rule set. This is only available with rule-based
* formatters.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DEFAULT_RULESET = 6;
/**
* The public rule sets. This is only available with rule-based
* formatters. This is a read-only attribute. The public rulesets are
* returned as a single string, with each ruleset name delimited by ';'
* (semicolon).
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PUBLIC_RULESETS = 7;
/**
* The decimal separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DECIMAL_SEPARATOR_SYMBOL = 0;
/**
* The grouping separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const GROUPING_SEPARATOR_SYMBOL = 1;
/**
* The pattern separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PATTERN_SEPARATOR_SYMBOL = 2;
/**
* The percent sign.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PERCENT_SYMBOL = 3;
/**
* Zero.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const ZERO_DIGIT_SYMBOL = 4;
/**
* Character representing a digit in the pattern.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const DIGIT_SYMBOL = 5;
/**
* The minus sign.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MINUS_SIGN_SYMBOL = 6;
/**
* The plus sign.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PLUS_SIGN_SYMBOL = 7;
/**
* The currency symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const CURRENCY_SYMBOL = 8;
/**
* The international currency symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const INTL_CURRENCY_SYMBOL = 9;
/**
* The monetary separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MONETARY_SEPARATOR_SYMBOL = 10;
/**
* The exponential symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const EXPONENTIAL_SYMBOL = 11;
/**
* Per mill symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PERMILL_SYMBOL = 12;
/**
* Escape padding character.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const PAD_ESCAPE_SYMBOL = 13;
/**
* Infinity symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const INFINITY_SYMBOL = 14;
/**
* Not-a-number symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const NAN_SYMBOL = 15;
/**
* Significant digit symbol.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const SIGNIFICANT_DIGIT_SYMBOL = 16;
/**
* The monetary grouping separator.
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const MONETARY_GROUPING_SEPARATOR_SYMBOL = 17;
/**
* Derive the type from variable type
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_DEFAULT = 0;
/**
* Format/parse as 32-bit integer
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_INT32 = 1;
/**
* Format/parse as 64-bit integer
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_INT64 = 2;
/**
* Format/parse as floating point value
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_DOUBLE = 3;
/**
* Format/parse as currency value
* @link https://php.net/manual/en/intl.numberformatter-constants.php
*/
const TYPE_CURRENCY = 4;
/**
* @param $locale
* @param $style
* @param $pattern [optional]
*/
public function __construct($locale, $style, $pattern = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a number formatter
* @link https://php.net/manual/en/numberformatter.create.php
* @param string $locale <p>
* Locale in which the number would be formatted (locale name, e.g. en_CA).
* </p>
* @param int $style <p>
* Style of the formatting, one of the
* format style constants. If
* <b>NumberFormatter::PATTERN_DECIMAL</b>
* or <b>NumberFormatter::PATTERN_RULEBASED</b>
* is passed then the number format is opened using the given pattern,
* which must conform to the syntax described in
* ICU DecimalFormat
* documentation or
* ICU RuleBasedNumberFormat
* documentation, respectively.
* </p>
* @param string $pattern [optional] <p>
* Pattern string if the chosen style requires a pattern.
* </p>
* @return NumberFormatter|false <b>NumberFormatter</b> object or <b>FALSE</b> on error.
*/
public static function create($locale, $style, $pattern = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format a number
* @link https://php.net/manual/en/numberformatter.format.php
* @param int|float $value <p>
* The value to format. Can be integer or float,
* other values will be converted to a numeric value.
* </p>
* @param int $type [optional] <p>
* The
* formatting type to use.
* </p>
* @return string|false the string containing formatted value, or <b>FALSE</b> on error.
*/
public function format($value, $type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse a number
* @link https://php.net/manual/en/numberformatter.parse.php
* @param string $value
* @param int $type [optional] <p>
* The
* formatting type to use. By default,
* <b>NumberFormatter::TYPE_DOUBLE</b> is used.
* </p>
* @param int $position [optional] <p>
* Offset in the string at which to begin parsing. On return, this value
* will hold the offset at which parsing ended.
* </p>
* @return mixed The value of the parsed number or <b>FALSE</b> on error.
*/
public function parse($value, $type = null, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format a currency value
* @link https://php.net/manual/en/numberformatter.formatcurrency.php
* @param float $value <p>
* The numeric currency value.
* </p>
* @param string $currency <p>
* The 3-letter ISO 4217 currency code indicating the currency to use.
* </p>
* @return string String representing the formatted currency value.
*/
public function formatCurrency($value, $currency) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse a currency number
* @link https://php.net/manual/en/numberformatter.parsecurrency.php
* @param string $value
* @param string $currency <p>
* Parameter to receive the currency name (3-letter ISO 4217 currency
* code).
* </p>
* @param int $position [optional] <p>
* Offset in the string at which to begin parsing. On return, this value
* will hold the offset at which parsing ended.
* </p>
* @return float|false The parsed numeric value or <b>FALSE</b> on error.
*/
public function parseCurrency($value, &$currency, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set an attribute
* @link https://php.net/manual/en/numberformatter.setattribute.php
* @param int $attr <p>
* Attribute specifier - one of the
* numeric attribute constants.
* </p>
* @param int $value <p>
* The attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setAttribute($attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get an attribute
* @link https://php.net/manual/en/numberformatter.getattribute.php
* @param int $attr <p>
* Attribute specifier - one of the
* numeric attribute constants.
* </p>
* @return int|false Return attribute value on success, or <b>FALSE</b> on error.
*/
public function getAttribute($attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set a text attribute
* @link https://php.net/manual/en/numberformatter.settextattribute.php
* @param int $attr <p>
* Attribute specifier - one of the
* text attribute
* constants.
* </p>
* @param string $value <p>
* Text for the attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setTextAttribute($attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get a text attribute
* @link https://php.net/manual/en/numberformatter.gettextattribute.php
* @param int $attr <p>
* Attribute specifier - one of the
* text attribute constants.
* </p>
* @return string|false Return attribute value on success, or <b>FALSE</b> on error.
*/
public function getTextAttribute($attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set a symbol value
* @link https://php.net/manual/en/numberformatter.setsymbol.php
* @param int $attr <p>
* Symbol specifier, one of the
* format symbol constants.
* </p>
* @param string $value <p>
* Text for the symbol.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setSymbol($attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get a symbol value
* @link https://php.net/manual/en/numberformatter.getsymbol.php
* @param int $attr <p>
* Symbol specifier, one of the
* format symbol constants.
* </p>
* @return string|false The symbol string or <b>FALSE</b> on error.
*/
public function getSymbol($attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set formatter pattern
* @link https://php.net/manual/en/numberformatter.setpattern.php
* @param string $pattern <p>
* Pattern in syntax described in
* ICU DecimalFormat
* documentation.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setPattern($pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter pattern
* @link https://php.net/manual/en/numberformatter.getpattern.php
* @return string|false Pattern string that is used by the formatter, or <b>FALSE</b> if an error happens.
*/
public function getPattern() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter locale
* @link https://php.net/manual/en/numberformatter.getlocale.php
* @param int $type [optional] <p>
* You can choose between valid and actual locale (
* <b>Locale::VALID_LOCALE</b>,
* <b>Locale::ACTUAL_LOCALE</b>,
* respectively). The default is the actual locale.
* </p>
* @return string The locale name used to create the formatter.
*/
public function getLocale($type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter's last error code.
* @link https://php.net/manual/en/numberformatter.geterrorcode.php
* @return int error code from last formatter call.
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter's last error message.
* @link https://php.net/manual/en/numberformatter.geterrormessage.php
* @return string error message from last formatter call.
*/
public function getErrorMessage() { }
}
class Normalizer {
/**
* Default normalization options
* @link https://www.php.net/manual/en/class.normalizer.php
*/
const OPTION_DEFAULT = "";
/**
* No decomposition/composition
* @link https://www.php.net/manual/en/class.normalizer.php
* @removed 8.0
*/
const NONE = "1";
/**
* Normalization Form D (NFD) - Canonical Decomposition
* @link https://www.php.net/manual/en/class.normalizer.php
*/
const FORM_D = "2";
const NFD = 2;
/**
* Normalization Form KD (NFKD) - Compatibility Decomposition
* @link https://www.php.net/manual/en/class.normalizer.php
*/
const FORM_KD = "3";
const NFKD = 3;
/**
* Normalization Form C (NFC) - Canonical Decomposition followed by
* Canonical Composition
* @link https://www.php.net/manual/en/class.normalizer.php
*/
const FORM_C = "4";
const NFC = 4;
/**
* Normalization Form KC (NFKC) - Compatibility Decomposition, followed by
* Canonical Composition
* @link https://www.php.net/manual/en/class.normalizer.php
*/
const FORM_KC = "5";
const NFKC = 5;
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Normalizes the input provided and returns the normalized string
* @link https://php.net/manual/en/normalizer.normalize.php
* @param string $input <p>The input string to normalize</p>
* @param string $form [optional] <p>One of the normalization forms.</p>
* @return string The normalized string or <b>NULL</b> if an error occurred.
*/
public static function normalize($input, $form = Normalizer::FORM_C) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Checks if the provided string is already in the specified normalization form.
* @link https://php.net/manual/en/normalizer.isnormalized.php
* @param string $input <p>The input string to normalize</p>
* @param string $form [optional] <p>
* One of the normalization forms.
* </p>
* @return bool <b>TRUE</b> if normalized, <b>FALSE</b> otherwise or if there an error
*/
public static function isNormalized($input, $form = Normalizer::FORM_C) { }
}
class Locale {
/**
* This is locale the data actually comes from.
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const ACTUAL_LOCALE = 0;
/**
* This is the most specific locale supported by ICU.
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const VALID_LOCALE = 1;
/**
* Used as locale parameter with the methods of the various locale affected classes,
* such as NumberFormatter. This constant would make the methods to use default
* locale.
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const DEFAULT_LOCALE = null;
/**
* Language subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const LANG_TAG = "language";
/**
* Extended language subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const EXTLANG_TAG = "extlang";
/**
* Script subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const SCRIPT_TAG = "script";
/**
* Region subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const REGION_TAG = "region";
/**
* Variant subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const VARIANT_TAG = "variant";
/**
* Grandfathered Language subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const GRANDFATHERED_LANG_TAG = "grandfathered";
/**
* Private subtag
* @link https://php.net/manual/en/intl.locale-constants.php
*/
const PRIVATE_TAG = "private";
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the default locale value from the INTL global 'default_locale'
* @link https://php.net/manual/en/locale.getdefault.php
* @return string The current runtime locale
*/
public static function getDefault() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* sets the default runtime locale
* @link https://php.net/manual/en/locale.setdefault.php
* @param string $locale <p>
* Is a BCP 47 compliant language tag containing the
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public static function setDefault($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the primary language for the input locale
* @link https://php.net/manual/en/locale.getprimarylanguage.php
* @param string $locale <p>
* The locale to extract the primary language code from
* </p>
* @return string The language code associated with the language or <b>NULL</b> in case of error.
*/
public static function getPrimaryLanguage($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the script for the input locale
* @link https://php.net/manual/en/locale.getscript.php
* @param string $locale <p>
* The locale to extract the script code from
* </p>
* @return string The script subtag for the locale or <b>NULL</b> if not present
*/
public static function getScript($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the region for the input locale
* @link https://php.net/manual/en/locale.getregion.php
* @param string $locale <p>
* The locale to extract the region code from
* </p>
* @return string The region subtag for the locale or <b>NULL</b> if not present
*/
public static function getRegion($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the keywords for the input locale
* @link https://php.net/manual/en/locale.getkeywords.php
* @param string $locale <p>
* The locale to extract the keywords from
* </p>
* @return array Associative array containing the keyword-value pairs for this locale
*/
public static function getKeywords($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for script of the input locale
* @link https://php.net/manual/en/locale.getdisplayscript.php
* @param string $locale <p>
* The locale to return a display script for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the script name
* </p>
* @return string Display name of the script for the $locale in the format appropriate for
* $in_locale.
*/
public static function getDisplayScript($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for region of the input locale
* @link https://php.net/manual/en/locale.getdisplayregion.php
* @param string $locale <p>
* The locale to return a display region for.
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the region name
* </p>
* @return string display name of the region for the $locale in the format appropriate for
* $in_locale.
*/
public static function getDisplayRegion($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for the input locale
* @link https://php.net/manual/en/locale.getdisplayname.php
* @param string $locale <p>
* The locale to return a display name for.
* </p>
* @param string $in_locale [optional] <p>optional format locale</p>
* @return string Display name of the locale in the format appropriate for $in_locale.
*/
public static function getDisplayName($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for language of the inputlocale
* @link https://php.net/manual/en/locale.getdisplaylanguage.php
* @param string $locale <p>
* The locale to return a display language for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the language name
* </p>
* @return string display name of the language for the $locale in the format appropriate for
* $in_locale.
*/
public static function getDisplayLanguage($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for variants of the input locale
* @link https://php.net/manual/en/locale.getdisplayvariant.php
* @param string $locale <p>
* The locale to return a display variant for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the variant name
* </p>
* @return string Display name of the variant for the $locale in the format appropriate for
* $in_locale.
*/
public static function getDisplayVariant($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns a correctly ordered and delimited locale ID
* @link https://php.net/manual/en/locale.composelocale.php
* @param array $subtags <p>
* an array containing a list of key-value pairs, where the keys identify
* the particular locale ID subtags, and the values are the associated
* subtag values.
* <p>
* The 'variant' and 'private' subtags can take maximum 15 values
* whereas 'extlang' can take maximum 3 values.e.g. Variants are allowed
* with the suffix ranging from 0-14. Hence the keys for the input array
* can be variant0, variant1, ...,variant14. In the returned locale id,
* the subtag is ordered by suffix resulting in variant0 followed by
* variant1 followed by variant2 and so on.
* </p>
* <p>
* The 'variant', 'private' and 'extlang' multiple values can be specified both
* as array under specific key (e.g. 'variant') and as multiple numbered keys
* (e.g. 'variant0', 'variant1', etc.).
* </p>
* </p>
* @return string The corresponding locale identifier.
*/
public static function composeLocale(array $subtags) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns a key-value array of locale ID subtag elements.
* @link https://php.net/manual/en/locale.parselocale.php
* @param string $locale <p>
* The locale to extract the subtag array from. Note: The 'variant' and
* 'private' subtags can take maximum 15 values whereas 'extlang' can take
* maximum 3 values.
* </p>
* @return array an array containing a list of key-value pairs, where the keys
* identify the particular locale ID subtags, and the values are the
* associated subtag values. The array will be ordered as the locale id
* subtags e.g. in the locale id if variants are '-varX-varY-varZ' then the
* returned array will have variant0=&gt;varX , variant1=&gt;varY ,
* variant2=&gt;varZ
*/
public static function parseLocale($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the variants for the input locale
* @link https://php.net/manual/en/locale.getallvariants.php
* @param string $locale <p>
* The locale to extract the variants from
* </p>
* @return array The array containing the list of all variants subtag for the locale
* or <b>NULL</b> if not present
*/
public static function getAllVariants($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Checks if a language tag filter matches with locale
* @link https://php.net/manual/en/locale.filtermatches.php
* @param string $langtag <p>
* The language tag to check
* </p>
* @param string $locale <p>
* The language range to check against
* </p>
* @param bool $canonicalize [optional] <p>
* If true, the arguments will be converted to canonical form before
* matching.
* </p>
* @return bool <b>TRUE</b> if $locale matches $langtag <b>FALSE</b> otherwise.
*/
public static function filterMatches($langtag, $locale, $canonicalize = false) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Searches the language tag list for the best match to the language
* @link https://php.net/manual/en/locale.lookup.php
* @param array $langtag <p>
* An array containing a list of language tags to compare to
* <i>locale</i>. Maximum 100 items allowed.
* </p>
* @param string $locale <p>
* The locale to use as the language range when matching.
* </p>
* @param bool $canonicalize [optional] <p>
* If true, the arguments will be converted to canonical form before
* matching.
* </p>
* @param string $default [optional] <p>
* The locale to use if no match is found.
* </p>
* @return string The closest matching language tag or default value.
*/
public static function lookup(array $langtag, $locale, $canonicalize = false, $default = null) { }
/**
* @link https://php.net/manual/en/locale.canonicalize.php
* @param string $locale
* @return string
*/
public static function canonicalize($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Tries to find out best available locale based on HTTP "Accept-Language" header
* @link https://php.net/manual/en/locale.acceptfromhttp.php
* @param string $header <p>
* The string containing the "Accept-Language" header according to format in RFC 2616.
* </p>
* @return string The corresponding locale identifier.
*/
public static function acceptFromHttp($header) { }
}
class MessageFormatter {
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Constructs a new Message Formatter
* @link https://php.net/manual/en/messageformatter.create.php
* @param string $locale <p>
* The locale to use when formatting arguments
* </p>
* @param string $pattern <p>
* The pattern string to stick arguments into.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
*/
public function __construct($locale, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Constructs a new Message Formatter
* @link https://php.net/manual/en/messageformatter.create.php
* @param string $locale <p>
* The locale to use when formatting arguments
* </p>
* @param string $pattern <p>
* The pattern string to stick arguments into.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @return MessageFormatter The formatter object
*/
public static function create($locale, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format the message
* @link https://php.net/manual/en/messageformatter.format.php
* @param array $args <p>
* Arguments to insert into the format string
* </p>
* @return string|false The formatted string, or <b>FALSE</b> if an error occurred
*/
public function format(array $args) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Quick format message
* @link https://php.net/manual/en/messageformatter.formatmessage.php
* @param string $locale <p>
* The locale to use for formatting locale-dependent parts
* </p>
* @param string $pattern <p>
* The pattern string to insert things into.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @param array $args <p>
* The array of values to insert into the format string
* </p>
* @return string|false The formatted pattern string or <b>FALSE</b> if an error occurred
*/
public static function formatMessage($locale, $pattern, array $args) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse input string according to pattern
* @link https://php.net/manual/en/messageformatter.parse.php
* @param string $value <p>
* The string to parse
* </p>
* @return array|false An array containing the items extracted, or <b>FALSE</b> on error
*/
public function parse($value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Quick parse input string
* @link https://php.net/manual/en/messageformatter.parsemessage.php
* @param string $locale <p>
* The locale to use for parsing locale-dependent parts
* </p>
* @param string $pattern <p>
* The pattern with which to parse the <i>value</i>.
* </p>
* @param string $source <p>
* The string to parse, conforming to the <i>pattern</i>.
* </p>
* @return array|false An array containing items extracted, or <b>FALSE</b> on error
*/
public static function parseMessage($locale, $pattern, $source) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the pattern used by the formatter
* @link https://php.net/manual/en/messageformatter.setpattern.php
* @param string $pattern <p>
* The pattern string to use in this message formatter.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setPattern($pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the pattern used by the formatter
* @link https://php.net/manual/en/messageformatter.getpattern.php
* @return string The pattern string for this message formatter
*/
public function getPattern() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale for which the formatter was created.
* @link https://php.net/manual/en/messageformatter.getlocale.php
* @return string The locale name
*/
public function getLocale() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error code from last operation
* @link https://php.net/manual/en/messageformatter.geterrorcode.php
* @return int The error code, one of UErrorCode values. Initial value is U_ZERO_ERROR.
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error text from the last operation
* @link https://php.net/manual/en/messageformatter.geterrormessage.php
* @return string Description of the last error.
*/
public function getErrorMessage() { }
}
class IntlDateFormatter {
/**
* Completely specified style (Tuesday, April 12, 1952 AD or 3:30:42pm PST)
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const FULL = 0;
/**
* Long style (January 12, 1952 or 3:30:32pm)
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const LONG = 1;
/**
* Medium style (Jan 12, 1952)
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const MEDIUM = 2;
/**
* Most abbreviated style, only essential data (12/13/52 or 3:30pm)
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const SHORT = 3;
/**
* Do not include this element
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const NONE = -1;
/**
* Gregorian Calendar
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const GREGORIAN = 1;
/**
* Non-Gregorian Calendar
* @link https://php.net/manual/en/class.intldateformatter.php#intl.intldateformatter-constants
*/
const TRADITIONAL = 0;
const RELATIVE_FULL = 0;
const RELATIVE_LONG = 1;
const RELATIVE_MEDIUM = 2;
const RELATIVE_SHORT = 3;
/**
* @param string|null $locale
* @param int $datetype
* @param int $timetype
* @param mixed|null $timezone [optional]
* @param mixed|null $calendar [optional]
* @param string $pattern [optional]
*/
public function __construct($locale, $datetype, $timetype, $timezone = null, $calendar = null, $pattern = '') { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a date formatter
* @link https://php.net/manual/en/intldateformatter.create.php
* @param string $locale <p>
* Locale to use when formatting or parsing; default is specified in the ini setting intl.default_locale.
* </p>
* @param int $datetype <p>
* Date type to use (<b>none</b>,
* <b>short</b>, <b>medium</b>,
* <b>long</b>, <b>full</b>).
* This is one of the
* IntlDateFormatter constants.
* </p>
* @param int $timetype <p>
* Time type to use (<b>none</b>,
* <b>short</b>, <b>medium</b>,
* <b>long</b>, <b>full</b>).
* This is one of the
* IntlDateFormatter constants.
* </p>
* @param string $timezone [optional] <p>
* Time zone ID, default is system default.
* </p>
* @param int $calendar [optional] <p>
* Calendar to use for formatting or parsing; default is Gregorian.
* This is one of the
* IntlDateFormatter calendar constants.
* </p>
* @param string $pattern [optional] <p>
* Optional pattern to use when formatting or parsing.
* Possible patterns are documented at http://userguide.icu-project.org/formatparse/datetime.
* </p>
* @return IntlDateFormatter
*/
public static function create($locale, $datetype, $timetype, $timezone = null, $calendar = null, $pattern = '') { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the datetype used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getdatetype.php
* @return int The current date type value of the formatter.
*/
public function getDateType() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the timetype used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.gettimetype.php
* @return int The current date type value of the formatter.
*/
public function getTimeType() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the calendar used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getcalendar.php
* @return int The calendar being used by the formatter.
*/
public function getCalendar() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* sets the calendar used to the appropriate calendar, which must be
* @link https://php.net/manual/en/intldateformatter.setcalendar.php
* @param int $which <p>
* The calendar to use.
* Default is <b>IntlDateFormatter::GREGORIAN</b>.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setCalendar($which) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the timezone-id used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.gettimezoneid.php
* @return string ID string for the time zone used by this formatter.
*/
public function getTimeZoneId() { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Get copy of formatter's calendar object
* @link https://www.php.net/manual/en/intldateformatter.getcalendarobject.php
* @return IntlCalendar A copy of the internal calendar object used by this formatter.
*/
public function getCalendarObject() { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Get formatter's timezone
* @link https://www.php.net/manual/en/intldateformatter.gettimezone.php
* @return IntlTimeZone|false The associated IntlTimeZone object or FALSE on failure.
*/
public function getTimeZone() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sets the time zone to use
* @link https://php.net/manual/en/intldateformatter.settimezoneid.php
* @param string $zone <p>
* The time zone ID string of the time zone to use.
* If <b>NULL</b> or the empty string, the default time zone for the runtime is used.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
* @deprecated 5.5 https://www.php.net/manual/en/migration55.deprecated.php
* @removed 7.0
*/
public function setTimeZoneId($zone) { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Sets formatter's timezone
* @link https://php.net/manual/en/intldateformatter.settimezone.php
* @param mixed $zone <p>
* The timezone to use for this formatter. This can be specified in the
* following forms:
* <ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link "https://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone" date.timezone} or
* through the function {@link "https://www.php.net/manual/en/function.date-default-timezone-set.php" date_default_timezone_set()} and as
* returned by {@link "https://www.php.net/manual/en/function.date-default-timezone-get.php" date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link "https://www.php.net/manual/en/class.intltimezone.php" IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link "https://www.php.net/manual/en/class.datetimezone.php" DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
*<li>
* <p>
* A {@link "https://www.php.net/manual/en/language.types.string.php" string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setTimeZone($zone) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the pattern used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.setpattern.php
* @param string $pattern <p>
* New pattern string to use.
* Possible patterns are documented at http://userguide.icu-project.org/formatparse/datetime.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
* Bad formatstrings are usually the cause of the failure.
*/
public function setPattern($pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the pattern used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getpattern.php
* @return string The pattern string being used to format/parse.
*/
public function getPattern() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale used by formatter
* @link https://php.net/manual/en/intldateformatter.getlocale.php
* @param int $which [optional]
* @return string|false the locale of this formatter or 'false' if error
*/
public function getLocale($which = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the leniency of the parser
* @link https://php.net/manual/en/intldateformatter.setlenient.php
* @param bool $lenient <p>
* Sets whether the parser is lenient or not, default is <b>TRUE</b> (lenient).
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function setLenient($lenient) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the lenient used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.islenient.php
* @return bool <b>TRUE</b> if parser is lenient, <b>FALSE</b> if parser is strict. By default the parser is lenient.
*/
public function isLenient() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format the date/time value as a string
* @link https://php.net/manual/en/intldateformatter.format.php
* @param mixed $value <p>
* Value to format. This may be a <b>DateTime</b> object,
* an integer representing a Unix timestamp value (seconds
* since epoch, UTC) or an array in the format output by
* <b>localtime</b>.
* </p>
* @return string|false The formatted string or, if an error occurred, <b>FALSE</b>.
*/
public function format($value) { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Formats an object
* @link https://www.php.net/manual/en/intldateformatter.formatobject.php
* @param object $object <p>
* An object of type {@link "https://www.php.net/manual/en/class.intlcalendar.php" IntlCalendar} or {@link "https://www.php.net/manual/en/class.datetime.php" DateTime}. The timezone information in the object will be used.
* </p>
* @param mixed $format [optional] <p>
* How to format the date/time. This can either be an {@link "https://www.php.net/manual/en/language.types.array.php" array} with
* two elements (first the date style, then the time style, these being one
* of the constants <b>IntlDateFormatter::NONE</b>,
* <b>IntlDateFormatter::SHORT</b>,
* <b>IntlDateFormatter::MEDIUM</b>,
* <b>IntlDateFormatter::LONG</b>,
* <b>IntlDateFormatter::FULL</b>), a long with
* the value of one of these constants (in which case it will be used both
* for the time and the date) or a {@link "https://www.php.net/manual/en/language.types.string.php" string} with the format
* described in {@link "http://www.icu-project.org/apiref/icu4c/classSimpleDateFormat.html#details" the ICU documentation}.
* If <br>NULL</br>, the default style will be used.
* </p>
* @param string $locale [optional] <p>
* The locale to use, or <b>NULL</b> to use the {@link "https://www.php.net/manual/en/intl.configuration.php#ini.intl.default-locale"default one}.</p>
* @return string|false A string with result or <b>FALSE</b> on failure.
*/
public static function formatObject($object, $format = null, $locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse string to a timestamp value
* @link https://php.net/manual/en/intldateformatter.parse.php
* @param string $value <p>
* string to convert to a time
* </p>
* @param int $position [optional] <p>
* Position at which to start the parsing in $value (zero-based).
* If no error occurs before $value is consumed, $parse_pos will contain -1
* otherwise it will contain the position at which parsing ended (and the error occurred).
* This variable will contain the end position if the parse fails.
* If $parse_pos > strlen($value), the parse fails immediately.
* </p>
* @return int timestamp parsed value
*/
public function parse($value, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse string to a field-based time value
* @link https://php.net/manual/en/intldateformatter.localtime.php
* @param string $value <p>
* string to convert to a time
* </p>
* @param int $position [optional] <p>
* Position at which to start the parsing in $value (zero-based).
* If no error occurs before $value is consumed, $parse_pos will contain -1
* otherwise it will contain the position at which parsing ended .
* If $parse_pos > strlen($value), the parse fails immediately.
* </p>
* @return array Localtime compatible array of integers : contains 24 hour clock value in tm_hour field
*/
public function localtime($value, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error code from last operation
* @link https://php.net/manual/en/intldateformatter.geterrorcode.php
* @return int The error code, one of UErrorCode values. Initial value is U_ZERO_ERROR.
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error text from the last operation.
* @link https://php.net/manual/en/intldateformatter.geterrormessage.php
* @return string Description of the last error.
*/
public function getErrorMessage() { }
}
class ResourceBundle implements IteratorAggregate {
/**
* @param $locale
* @param $bundlename
* @param $fallback [optional]
*/
public function __construct($locale, $bundlename, $fallback) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Create a resource bundle
* @link https://php.net/manual/en/resourcebundle.create.php
* @param string $locale <p>
* Locale for which the resources should be loaded (locale name, e.g. en_CA).
* </p>
* @param string $bundlename <p>
* The directory where the data is stored or the name of the .dat file.
* </p>
* @param bool $fallback [optional] <p>
* Whether locale should match exactly or fallback to parent locale is allowed.
* </p>
* @return ResourceBundle|false <b>ResourceBundle</b> object or <b>FALSE</b> on error.
*/
public static function create($locale, $bundlename, $fallback = null) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get data from the bundle
* @link https://php.net/manual/en/resourcebundle.get.php
* @param string|int $index <p>
* Data index, must be string or integer.
* </p>
* @return mixed the data located at the index or <b>NULL</b> on error. Strings, integers and binary data strings
* are returned as corresponding PHP types, integer array is returned as PHP array. Complex types are
* returned as <b>ResourceBundle</b> object.
*/
public function get($index) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get number of elements in the bundle
* @link https://php.net/manual/en/resourcebundle.count.php
* @return int number of elements in the bundle.
*/
public function count() { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get supported locales
* @link https://php.net/manual/en/resourcebundle.locales.php
* @param string $bundlename <p>
* Path of ResourceBundle for which to get available locales, or
* empty string for default locales list.
* </p>
* @return array the list of locales supported by the bundle.
*/
public static function getLocales($bundlename) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get bundle's last error code.
* @link https://php.net/manual/en/resourcebundle.geterrorcode.php
* @return int error code from last bundle object call.
*/
public function getErrorCode() { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get bundle's last error message.
* @link https://php.net/manual/en/resourcebundle.geterrormessage.php
* @return string error message from last bundle object's call.
*/
public function getErrorMessage() { }
/**
* @since 8.0
*/
public function getIterator(){}
}
/**
* @since 5.4
*/
class Transliterator {
const FORWARD = 0;
const REVERSE = 1;
public $id;
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Private constructor to deny instantiation
* @link https://php.net/manual/en/transliterator.construct.php
*/
final private function __construct() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create a transliterator
* @link https://php.net/manual/en/transliterator.create.php
* @param string $id <p>
* The id.
* </p>
* @param int $direction [optional] <p>
* The direction, defaults to
* >Transliterator::FORWARD.
* May also be set to
* Transliterator::REVERSE.
* </p>
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure.
*/
public static function create($id, $direction = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create transliterator from rules
* @link https://php.net/manual/en/transliterator.createfromrules.php
* @param string $rules <p>
* The rules.
* </p>
* @param string $direction [optional] <p>
* The direction, defaults to
* >Transliterator::FORWARD.
* May also be set to
* Transliterator::REVERSE.
* </p>
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure.
*/
public static function createFromRules($rules, $direction = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create an inverse transliterator
* @link https://php.net/manual/en/transliterator.createinverse.php
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure
*/
public function createInverse() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get transliterator IDs
* @link https://php.net/manual/en/transliterator.listids.php
* @return array An array of registered transliterator IDs on success,
* or <b>FALSE</b> on failure.
*/
public static function listIDs() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Transliterate a string
* @link https://php.net/manual/en/transliterator.transliterate.php
* @param string $subject <p>
* The string to be transformed.
* </p>
* @param int $start [optional] <p>
* The start index (in UTF-16 code units) from which the string will start
* to be transformed, inclusive. Indexing starts at 0. The text before will
* be left as is.
* </p>
* @param int $end [optional] <p>
* The end index (in UTF-16 code units) until which the string will be
* transformed, exclusive. Indexing starts at 0. The text after will be
* left as is.
* </p>
* @return string|false The transfomed string on success, or <b>FALSE</b> on failure.
*/
public function transliterate($subject, $start = null, $end = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get last error code
* @link https://php.net/manual/en/transliterator.geterrorcode.php
* @return int The error code on success,
* or <b>FALSE</b> if none exists, or on failure.
*/
public function getErrorCode() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get last error message
* @link https://php.net/manual/en/transliterator.geterrormessage.php
* @return string The error code on success,
* or <b>FALSE</b> if none exists, or on failure.
*/
public function getErrorMessage() { }
}
/**
* @link https://php.net/manual/en/class.spoofchecker.php
*/
class Spoofchecker {
const SINGLE_SCRIPT_CONFUSABLE = 1;
const MIXED_SCRIPT_CONFUSABLE = 2;
const WHOLE_SCRIPT_CONFUSABLE = 4;
const ANY_CASE = 8;
const SINGLE_SCRIPT = 16;
const INVISIBLE = 32;
const CHAR_LIMIT = 64;
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Constructor
* @link https://php.net/manual/en/spoofchecker.construct.php
*/
public function __construct() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Checks if a given text contains any suspicious characters
* @link https://php.net/manual/en/spoofchecker.issuspicious.php
* @param string $text <p>
* </p>
* @param string $error [optional] <p>
* </p>
* @return bool
*/
public function isSuspicious($text, &$error = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Checks if a given text contains any confusable characters
* @link https://php.net/manual/en/spoofchecker.areconfusable.php
* @param string $s1 <p>
* </p>
* @param string $s2 <p>
* </p>
* @param string $error [optional] <p>
* </p>
* @return bool
*/
public function areConfusable($s1, $s2, &$error = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Locales to use when running checks
* @link https://php.net/manual/en/spoofchecker.setallowedlocales.php
* @param string $locale_list <p>
* </p>
* @return void
*/
public function setAllowedLocales($locale_list) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Set the checks to run
* @link https://php.net/manual/en/spoofchecker.setchecks.php
* @param string $checks <p>
* </p>
* @return void
*/
public function setChecks($checks) { }
}
/**
* @since 5.5
*/
class IntlGregorianCalendar extends IntlCalendar {
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @param mixed $timeZone
* @param string $locale
* @return IntlGregorianCalendar
*/
public static function createInstance($timeZone = null, $locale = null) { }
/**
* @param double $change
*
*/
public function setGregorianChange($change) { }
/**
* @return double $change
*/
public function getGregorianChange() { }
/**
* @param int $year
* @return bool
*/
public function isLeapYear($year) { }
}
/**
* @since 5.5
*/
class IntlCalendar {
/* Constants */
const FIELD_ERA = 0;
const FIELD_YEAR = 1;
const FIELD_MONTH = 2;
const FIELD_WEEK_OF_YEAR = 3;
const FIELD_WEEK_OF_MONTH = 4;
const FIELD_DATE = 5;
const FIELD_DAY_OF_YEAR = 6;
const FIELD_DAY_OF_WEEK = 7;
const FIELD_DAY_OF_WEEK_IN_MONTH = 8;
const FIELD_AM_PM = 9;
const FIELD_HOUR = 10;
const FIELD_HOUR_OF_DAY = 11;
const FIELD_MINUTE = 12;
const FIELD_SECOND = 13;
const FIELD_MILLISECOND = 14;
const FIELD_ZONE_OFFSET = 15;
const FIELD_DST_OFFSET = 16;
const FIELD_YEAR_WOY = 17;
const FIELD_DOW_LOCAL = 18;
const FIELD_EXTENDED_YEAR = 19;
const FIELD_JULIAN_DAY = 20;
const FIELD_MILLISECONDS_IN_DAY = 21;
const FIELD_IS_LEAP_MONTH = 22;
const FIELD_FIELD_COUNT = 23;
const FIELD_DAY_OF_MONTH = 5;
const DOW_SUNDAY = 1;
const DOW_MONDAY = 2;
const DOW_TUESDAY = 3;
const DOW_WEDNESDAY = 4;
const DOW_THURSDAY = 5;
const DOW_FRIDAY = 6;
const DOW_SATURDAY = 7;
const DOW_TYPE_WEEKDAY = 0;
const DOW_TYPE_WEEKEND = 1;
const DOW_TYPE_WEEKEND_OFFSET = 2;
const DOW_TYPE_WEEKEND_CEASE = 3;
const WALLTIME_FIRST = 1;
const WALLTIME_LAST = 0;
const WALLTIME_NEXT_VALID = 2;
/* Methods */
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Add a (signed) amount of time to a field
* @link https://www.php.net/manual/en/intlcalendar.add.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param int $amount <p>The signed amount to add to the current field. If the amount is positive, the instant will be moved forward; if it is negative, the instant wil be moved into the past. The unit is implicit to the field type.
* For instance, hours for <b>IntlCalendar::FIELD_HOUR_OF_DAY</b>.</p>
* @return bool Returns TRUE on success or FALSE on failure.
*/
public function add($field, $amount) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether this object's time is after that of the passed object
* https://www.php.net/manual/en/intlcalendar.after.php
* @param IntlCalendar $calendar <p>The calendar whose time will be checked against this object's time.</p>
* @return bool
* Returns <b>TRUE</b> if this object's current time is after that of the
* <em>calendar</em> argument's time. Returns <b>FALSE</b> otherwise.
* Also returns <b>FALSE</b> on failure. You can use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or
* {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to detect error conditions.
*/
public function after(IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether this object's time is before that of the passed object
* @link https://www.php.net/manual/en/intlcalendar.before.php
* @param IntlCalendar $calendar <p> The calendar whose time will be checked against this object's time.</p>
* @return bool
* Returns <b>TRUE</B> if this object's current time is before that of the
* <em>calendar</em> argument's time. Returns <b>FALSE</b> otherwise.
* Also returns <b>FALSE</b> on failure. You can use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or
* {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to detect error conditions.
* </p>
*/
public function before(IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Clear a field or all fields
* @link https://www.php.net/manual/en/intlcalendar.clear.php
* @param int $field [optional] <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure. Failure can only occur is invalid arguments are provided.
*/
public function clear($field = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Private constructor for disallowing instantiation
* @link https://www.php.net/manual/en/intlcalendar.construct.php
*
*/
private function __construct() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a new IntlCalendar
* @link https://www.php.net/manual/en/intlcalendar.createinstance.php
* @param mixed $timeZone [optional] <p> <p>
* The timezone to use.
* </p>
*
* <ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link https://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone} or
* through the function {@link https://www.php.net/manual/en/function.date-default-timezone-set.php date_default_timezone_set()} and as
* returned by {@link https://www.php.net/manual/en/function.date-default-timezone-get.php date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link https://www.php.net/manual/en/class.intltimezone.php IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link https://www.php.net/manual/en/class.datetimezone.php DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link https://www.php.net/manual/en/language.types.string.php string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw
* offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* </p>
* @param string $locale [optional] <p>
* A locale to use or <b>NULL</b> to use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.default-locale the default locale}.
* </p>
* @return IntlCalendar
* The created {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} instance or <b>NULL</b> on
* failure.
*/
public static function createInstance($timeZone = null, $locale = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Compare time of two IntlCalendar objects for equality
* @link https://www.php.net/manual/en/intlcalendar.equals.php
* @param IntlCalendar $calendar
* @return bool <p>
* Returns <b>TRUE</b> if the current time of both this and the passed in
* {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} object are the same, or <b>FALSE</b>
* otherwise. The value <b>FALSE</b> can also be returned on failure. This can only
* happen if bad arguments are passed in. In any case, the two cases can be
* distinguished by calling {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()}.
* </p>
*/
public function equals($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Calculate difference between given time and this object's time
* @link https://www.php.net/manual/en/intlcalendar.fielddifference.php
* @param float $when <p>
* The time against which to compare the quantity represented by the
* <em>field</em>. For the result to be positive, the time
* given for this parameter must be ahead of the time of the object the
* method is being invoked on.
* </p>
* @param int $field <p>
* The field that represents the quantity being compared.
* </p>
*
* <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int Returns a (signed) difference of time in the unit associated with the
* specified field or <b>FALSE</b> on failure.
*
*/
public function fieldDifference($when, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a2)<br/>
* Create an IntlCalendar from a DateTime object or string
* @link https://www.php.net/manual/en/intlcalendar.fromdatetime.php
* @param mixed $dateTime <p>
* A {@link https://www.php.net/manual/en/class.datetime.php DateTime} object or a {@link https://www.php.net/manual/en/language.types.string.php string} that
* can be passed to {@link https://www.php.net/manual/en/datetime.construct.php DateTime::__construct()}.
* </p>
* @return IntlCalendar
* The created {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} object or <b>NULL</b> in case of
* failure. If a {@link https://www.php.net/manual/en/language.types.string.php string} is passed, any exception that occurs
* inside the {@link https://www.php.net/manual/en/class.datetime.php DateTime} constructor is propagated.
*/
public static function fromDateTime($dateTime) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the value for a field
* @link https://www.php.net/manual/en/intlcalendar.get.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int An integer with the value of the time field.
*/
public function get($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* The maximum value for a field, considering the object's current time
* @link https://www.php.net/manual/en/intlcalendar.getactualmaximum.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing the maximum value in the units associated
* with the given <em>field</em> or <b>FALSE</b> on failure.
*/
public function getActualMaximum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* The minimum value for a field, considering the object's current time
* @link https://www.php.net/manual/en/intlcalendar.getactualminimum.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing the minimum value in the field's
* unit or <b>FALSE</b> on failure.
*/
public function getActualMinimum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get array of locales for which there is data
* @link https://www.php.net/manual/en/intlcalendar.getavailablelocales.php
* @return array An array of strings, one for which locale.
*/
public static function getAvailableLocales() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Tell whether a day is a weekday, weekend or a day that has a transition between the two
* @param int $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return int
* Returns one of the constants
* <b>IntlCalendar::DOW_TYPE_WEEKDAY</b>,
* <b>IntlCalendar::DOW_TYPE_WEEKEND</b>,
* <b>IntlCalendar::DOW_TYPE_WEEKEND_OFFSET</b> or
* <b>IntlCalendar::DOW_TYPE_WEEKEND_CEASE</b> or <b>FALSE</b> on failure.
*
*/
public function getDayOfWeekType($dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error code on the object
* @link https://www.php.net/manual/en/intlcalendar.geterrorcode.php
* @return int An ICU error code indicating either success, failure or a warning.
*
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error message on the object
* @link https://www.php.net/manual/en/intlcalendar.geterrormessage.php
* @return string The error message associated with last error that occurred in a function call on this object, or a string indicating the non-existance of an error.
*/
public function getErrorMessage() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the first day of the week for the calendar's locale
* @link https://www.php.net/manual/en/intlcalendar.getfirstdayofweek.php
* @return int
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b> or <b>FALSE</b> on failure.
*
*/
public function getFirstDayOfWeek() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the largest local minimum value for a field
* @link https://www.php.net/manual/en/intlcalendar.getgreatestminimum.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing a field value, in the field's
* unit, or <b>FALSE</b> on failure.
*/
public function getGreatestMinimum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get set of locale keyword values
* @param string $key <p>
* The locale keyword for which relevant values are to be queried. Only
* <em>'calendar'</em> is supported.
* </p>
* @param string $locale <p>
* The locale onto which the keyword/value pair are to be appended.
* </p>
* @param bool $commonlyUsed
* <p>
* Whether to show only the values commonly used for the specified locale.
* </p>
* @return Iterator|false An iterator that yields strings with the locale keyword values or <b>FALSE</b> on failure.
*/
public static function getKeywordValuesForLocale($key, $locale, $commonlyUsed) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the smallest local maximum for a field
* @link https://www.php.net/manual/en/intlcalendar.getleastmaximum.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.ph int} representing a field value in the field's
* unit or <b>FALSE</b> on failure.
* </p>
*/
public function getLeastMaximum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the locale associated with the object
* @link https://www.php.net/manual/en/intlcalendar.getlocale.php
* @param int $localeType <p>
* Whether to fetch the actual locale (the locale from which the calendar
* data originates, with <b>Locale::ACTUAL_LOCALE</b>) or the
* valid locale, i.e., the most specific locale supported by ICU relatively
* to the requested locale see <b>Locale::VALID_LOCALE</b>.
* From the most general to the most specific, the locales are ordered in
* this fashion actual locale, valid locale, requested locale.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
*
*/
public function getLocale($localeType) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global maximum value for a field
* @link https://www.php.net/manual/en/intlcalendar.getmaximum.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
*/
public function getMaximum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get minimal number of days the first week in a year or month can have
* @link https://www.php.net/manual/en/intlcalendar.getminimaldaysinfirstweek.php
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing a number of days or <b>FALSE</b> on failure.
*/
public function getMinimalDaysInFirstWeek() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global minimum value for a field
* @link https://www.php.net/manual/en/intlcalendar.getminimum.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An int representing a value for the given field in the field's unit or FALSE on failure.
*/
public function getMinimum($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get number representing the current time
* @return float A float representing a number of milliseconds since the epoch, not counting leap seconds.
*/
public static function getNow() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get behavior for handling repeating wall time
* @link https://www.php.net/manual/en/intlcalendar.getrepeatedwalltimeoption.php
* @return int
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b> or
* <b>IntlCalendar::WALLTIME_LAST</b>.
*
*/
public function getRepeatedWallTimeOption() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get behavior for handling skipped wall time
* @link https://www.php.net/manual/en/intlcalendar.getskippedwalltimeoption.php
* @return int
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b>,
* <b>IntlCalendar::WALLTIME_LAST</b> or
* <b>IntlCalendar::WALLTIME_NEXT_VALID</b>.
*/
public function getSkippedWallTimeOption() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get time currently represented by the object
* @return float
* A {@link https://www.php.net/manual/en/language.types.float.php float} representing the number of milliseconds elapsed since the
* reference time (1 Jan 1970 00:00:00 UTC).
*/
public function getTime() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the object's timezone
* @link https://www.php.net/manual/en/intlcalendar.gettimezone.php
* @return IntlTimeZone
* An {@link https://www.php.net/manual/en/class.intltimezone.php IntlTimeZone} object corresponding to the one used
* internally in this object.
*/
public function getTimeZone() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the calendar type
* @link https://www.php.net/manual/en/intlcalendar.gettype.php
* @return string
* A {@link https://www.php.net/manual/en/language.types.string.php string} representing the calendar type, such as
* <em>'gregorian'</em>, <em>'islamic'</em>, etc.
*/
public function getType() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get time of the day at which weekend begins or ends
* @link https://www.php.net/manual/en/intlcalendar.getweekendtransition.php
* @param string $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return int
* The number of milliseconds into the day at which the the weekend begins or
* ends or <b>FALSE</b> on failure.
*/
public function getWeekendTransition($dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether the object's time is in Daylight Savings Time
* @link https://www.php.net/manual/en/intlcalendar.indaylighttime.php
* @return bool
* Returns <b>TRUE</b> if the date is in Daylight Savings Time, <b>FALSE</b> otherwise.
* The value <b>FALSE</b> may also be returned on failure, for instance after
* specifying invalid field values on non-lenient mode; use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or query
* {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to disambiguate.
*/
public function inDaylightTime() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether another calendar is equal but for a different time
* @link https://www.php.net/manual/en/intlcalendar.isequivalentto.php
* @param IntlCalendar $calendar The other calendar against which the comparison is to be made.
* @return bool
* Assuming there are no argument errors, returns <b>TRUE</b> iif the calendars are equivalent except possibly for their set time.
*/
public function isEquivalentTo(IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether date/time interpretation is in lenient mode
* @link https://www.php.net/manual/en/intlcalendar.islenient.php
* @return bool
* A {@link https://www.php.net/manual/en/language.types.boolean.php bool} representing whether the calendar is set to lenient mode.
*/
public function isLenient() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether a certain date/time is in the weekend
* @link https://www.php.net/manual/en/intlcalendar.isweekend.php
* @param float|null $date [optional] <p>
* An optional timestamp representing the number of milliseconds since the
* epoch, excluding leap seconds. If <b>NULL</b>, this object's current time is
* used instead.
* </p>
* @return bool
* <p> A {@link https://www.php.net/manual/en/language.types.boolean.php bool} indicating whether the given or this object's time occurs
* in a weekend.
* </p>
* <p>
* The value <b>FALSE</b> may also be returned on failure, for instance after giving
* a date out of bounds on non-lenient mode; use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or query
* {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to disambiguate.</p>
*/
public function isWeekend($date = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Add value to field without carrying into more significant fields
* @link https://www.php.net/manual/en/intlcalendar.roll.php
* @param int $field
* <p>One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time
* {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param mixed $amountOrUpOrDown <p>
* The (signed) amount to add to the field, <b>TRUE</b> for rolling up (adding
* <em>1</em>), or <b>FALSE</b> for rolling down (subtracting
* <em>1</em>).
* </p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
public function roll($field, $amountOrUpOrDown) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether a field is set
* @link https://www.php.net/manual/en/intlcalendar.isset.php
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time
* {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return bool Assuming there are no argument errors, returns <b>TRUE</b> iif the field is set.
*/
public function PS_UNRESERVE_PREFIX_isSet($field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set a time field or several common fields at once
* @link https://www.php.net/manual/en/intlcalendar.set.php
* @param int $year <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param int $month <p>
* The new value for <b>IntlCalendar::FIELD_MONTH</b>.
* </p>
* @param int $dayOfMonth [optional] <p>
* The new value for <b>IntlCalendar::FIELD_DAY_OF_MONTH</b>.
* The month sequence is zero-based, i.e., January is represented by 0,
* February by 1, ..., December is 11 and Undecember (if the calendar has
* it) is 12.
* </p>
* @param int $hour [optional]
* <p>
* The new value for <b>IntlCalendar::FIELD_HOUR_OF_DAY</b>.
* </p>
* @param int $minute [optional]
* <p>
* The new value for <b>IntlCalendar::FIELD_MINUTE</b>.
* </p>
* @param int $second [optional] <p>
* The new value for <b>IntlCalendar::FIELD_SECOND</b>.
*</p>
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
*/
public function set($year, $month, $dayOfMonth = null, $hour = null, $minute = null, $second = null) { }
/**
* (PHP 5 >=5.5.0 PECL intl >= 3.0.0a1)<br/>
* Set a time field or several common fields at once
* @link https://www.php.net/manual/en/intlcalendar.set.php
* @param int $field One of the IntlCalendar date/time field constants. These are integer values between 0 and IntlCalendar::FIELD_COUNT.
* @param int $value The new value of the given field.
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
* @since 5.5
*/
public function set($field, $value) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the day on which the week is deemed to start
* @link https://www.php.net/manual/en/intlcalendar.setfirstdayofweek.php
* @param int $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return bool Returns TRUE on success. Failure can only happen due to invalid parameters.
*/
public function setFirstDayOfWeek($dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set whether date/time interpretation is to be lenient
* @link https://www.php.net/manual/en/intlcalendar.setlenient.php
* @param string $isLenient <p>
* Use <b>TRUE</b> to activate the lenient mode; <b>FALSE</b> otherwise.
* </p>
* @return bool Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
*/
public function setLenient($isLenient) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set behavior for handling repeating wall times at negative timezone offset transitions
* @link https://www.php.net/manual/en/intlcalendar.setrepeatedwalltimeoption.php
* @param int $wallTimeOption <p>
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b> or
* <b>IntlCalendar::WALLTIME_LAST</b>.
* </p>
* @return bool
* Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
*
*/
public function setRepeatedWallTimeOption($wallTimeOption) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set behavior for handling skipped wall times at positive timezone offset transitions
* @link https://www.php.net/manual/en/intlcalendar.setskippedwalltimeoption.php
* @param int $wallTimeOption <p>
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b>,
* <b>IntlCalendar::WALLTIME_LAST</b> or
* <b>IntlCalendar::WALLTIME_NEXT_VALID</b>.
* </p>
* @return bool
* <p>
* Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
* </p>
*/
public function setSkippedWallTimeOption($wallTimeOption) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the calendar time in milliseconds since the epoch
* @link https://www.php.net/manual/en/intlcalendar.settime.php
* @param float $date <p>
* An instant represented by the number of number of milliseconds between
* such instant and the epoch, ignoring leap seconds.
* </p>
* @return bool
* Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
*/
public function setTime($date) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the timezone used by this calendar
* @link https://www.php.net/manual/en/intlcalendar.settimezone.php
* @param mixed $timeZone <p>
* The new timezone to be used by this calendar. It can be specified in the
* following ways:
*
* </p><ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link https://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone} or
* through the function {@link https://www.php.net/manual/en/function.date-default-timezone-set.php date_default_timezone_set()} and as
* returned by {@link https://www.php.net/manual/en/function.date-default-timezone-get.php date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link https://www.php.net/manual/en/class.intltimezone.php IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link https://www.php.net/manual/en/class.datetimezone.php DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link https://www.php.net/manual/en/language.types.string.php string}, which should be a valid ICU timezone identifier.
* See b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw
* offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
*/
public function setTimeZone($timeZone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a2)<br/>
* Convert an IntlCalendar into a DateTime object
* @link https://www.php.net/manual/en/intlcalendar.todatetime.php
* @return DateTime|false
* A {@link https://www.php.net/manual/en/class.datetime.php DateTime} object with the same timezone as this
* object (though using PHP's database instead of ICU's) and the same time,
* except for the smaller precision (second precision instead of millisecond).
* Returns <b>FALSE</b> on failure.
*/
public function toDateTime() { }
}
/**
* @since 5.5
*/
class IntlIterator implements Iterator {
public function current() { }
public function key() { }
public function next() { }
public function rewind() { }
public function valid() { }
}
/**
* @since 5.5
*/
class IntlException extends Exception {
}
/**
* @since 5.5
*/
class IntlTimeZone {
/* Constants */
const DISPLAY_SHORT = 1;
const DISPLAY_LONG = 2;
/* Methods */
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the number of IDs in the equivalency group that includes the given ID
* @link https://www.php.net/manual/en/intltimezone.countequivalentids.php
* @param string $zoneId
* @return int|false number of IDs or <b>FALSE</b> on failure
*/
public static function countEquivalentIDs($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a new copy of the default timezone for this host
* @link https://www.php.net/manual/en/intltimezone.createdefault.php
* @return IntlTimeZone
*/
public static function createDefault() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get an enumeration over time zone IDs associated with the given country or offset
* @link https://www.php.net/manual/en/intltimezone.createenumeration.php
* @param mixed $countryOrRawOffset [optional]
* @return IntlIterator|false an iterator or <b>FALSE</b> on failure
*/
public static function createEnumeration($countryOrRawOffset) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a timezone object for the given ID
* @link https://www.php.net/manual/en/intltimezone.createtimezone.php
* @param string $zoneId
* @return IntlTimeZone|null a timezone object or <b>NULL</b> on failure
*/
public static function createTimeZone($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get an enumeration over system time zone IDs with the given filter conditions
* @link https://www.php.net/manual/en/intltimezone.createtimezoneidenumeration.php
* @param int $zoneType
* @param string|null $region [optional]
* @param int $rawOffset [optional]
* @return IntlIterator|false an iterator or <b>FALSE</b> on failure
*/
public static function createTimeZoneIDEnumeration($zoneType, $region = null, $rawOffset = 0) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a timezone object from DateTimeZone
* @link https://www.php.net/manual/en/intltimezone.fromdatetimezone.php
* @param DateTimeZone $zoneId
* @return IntlTimeZone|null a timezone object or <b>NULL</b> on failure
*/
public static function fromDateTimeZone($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the canonical system timezone ID or the normalized custom time zone ID for the given time zone ID
* @link https://www.php.net/manual/en/intltimezone.getcanonicalid.php
* @param string $zoneId
* @param bool $isSystemID [optional]
* @return string|false the timezone ID or <b>FALSE</b> on failure
*/
public static function getCanonicalID($zoneId, &$isSystemID) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get a name of this time zone suitable for presentation to the user
* @param bool $isDaylight [optional]
* @param int $style [optional]
* @param string $locale [optional]
* @return string|false the timezone name or <b>FALSE</b> on failure
*/
public function getDisplayName($isDaylight, $style, $locale) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the amount of time to be added to local standard time to get local wall clock time
* @link https://www.php.net/manual/en/intltimezone.getequivalentid.php
* @return int
*/
public function getDSTSavings() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get an ID in the equivalency group that includes the given ID
* @link https://www.php.net/manual/en/intltimezone.getequivalentid.php
* @param string $zoneId
* @param int $index
* @return string|false the time zone ID or <b>FALSE</b> on failure
*/
public static function getEquivalentID($zoneId, $index) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error code on the object
* @link https://www.php.net/manual/en/intltimezone.geterrorcode.php
* @return int
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error message on the object
* @link https://www.php.net/manual/en/intltimezone.geterrormessage.php
* @return string
*/
public function getErrorMessage() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create GMT (UTC) timezone
* @link https://www.php.net/manual/en/intltimezone.getgmt.php
* @return IntlTimeZone
*/
public static function getGMT() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get timezone ID
* @return string
*/
public function getID() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the time zone raw and GMT offset for the given moment in time
* @link https://www.php.net/manual/en/intltimezone.getoffset.php
* @param float $date
* moment in time for which to return offsets, in units of milliseconds from
* January 1, 1970 0:00 GMT, either GMT time or local wall time, depending on
* `local'.
* @param bool $local
* if true, `date' is local wall time; otherwise it is in GMT time.
* @param int &$rawOffset
* output parameter to receive the raw offset, that is, the offset not
* including DST adjustments
* @param int &$dstOffset
* output parameter to receive the DST offset, that is, the offset to be added
* to `rawOffset' to obtain the total offset between local and GMT time. If
* DST is not in effect, this value is zero; otherwise it is a positive value,
* typically one hour.
* @return bool boolean indication of success
*/
public function getOffset($date, $local, &$rawOffset, &$dstOffset) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the raw GMT offset (before taking daylight savings time into account
* @link https://www.php.net/manual/en/intltimezone.getrawoffset.php
* @return int
*/
public function getRawOffset() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the region code associated with the given system time zone ID
* @link https://www.php.net/manual/en/intltimezone.getregion.php
* @param string $zoneId
* @return string|false region or <b>FALSE</b> on failure
*/
public static function getRegion($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the timezone data version currently used by ICU
* @link https://www.php.net/manual/en/intltimezone.gettzdataversion.php
* @return string
*/
public static function getTZDataVersion() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the "unknown" time zone
* @link https://www.php.net/manual/en/intltimezone.getunknown.php
* @return IntlTimeZone
*/
public static function getUnknown() { }
/**
* (PHP 7 &gt;=7.1.0)<br/>
* Translates a system timezone (e.g. "America/Los_Angeles") into a Windows
* timezone (e.g. "Pacific Standard Time").
* @link https://www.php.net/manual/en/intltimezone.getwindowsid.php
* @param string $timezone
* @return string|false the Windows timezone or <b>FALSE</b> on failure
* @since 7.1
*/
public static function getWindowsID($timezone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Check if this zone has the same rules and offset as another zone
* @link https://www.php.net/manual/en/intltimezone.hassamerules.php
* @param IntlTimeZone $otherTimeZone
* @return bool
*/
public function hasSameRules(IntlTimeZone $otherTimeZone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Convert to DateTimeZone object
* @link https://www.php.net/manual/ru/intltimezone.todatetimezone.php
* @return DateTimeZone|false the DateTimeZone object or <b>FALSE</b> on failure
*/
public function toDateTimeZone() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Check if this time zone uses daylight savings time
* @link https://www.php.net/manual/ru/intltimezone.usedaylighttime.php
* @return bool
*/
public function useDaylightTime() { }
}
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a collator
* @link https://php.net/manual/en/collator.create.php
* @param string $locale <p>
* The locale containing the required collation rules. Special values for
* locales can be passed in - if null is passed for the locale, the
* default locale collation rules will be used. If empty string ("") or
* "root" are passed, UCA rules will be used.
* </p>
* @return Collator Return new instance of <b>Collator</b> object, or <b>NULL</b>
* on error.
*/
function collator_create($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Compare two Unicode strings
* @link https://php.net/manual/en/collator.compare.php
* @param Collator $object
* @param string $str1 <p>
* The first string to compare.
* </p>
* @param string $str2 <p>
* The second string to compare.
* </p>
* @return int Return comparison result:</p>
* <p>
* <p>
* 1 if <i>str1</i> is greater than
* <i>str2</i> ;
* </p>
* <p>
* 0 if <i>str1</i> is equal to
* <i>str2</i>;
* </p>
* <p>
* -1 if <i>str1</i> is less than
* <i>str2</i> .
* </p>
* On error
* boolean
* <b>FALSE</b>
* is returned.
*/
function collator_compare(Collator $object, $str1, $str2) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get collation attribute value
* @link https://php.net/manual/en/collator.getattribute.php
* @param Collator $object
* @param int $attr <p>
* Attribute to get value for.
* </p>
* @return int|false Attribute value, or boolean <b>FALSE</b> on error.
*/
function collator_get_attribute(Collator $object, $attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set collation attribute
* @link https://php.net/manual/en/collator.setattribute.php
* @param Collator $object
* @param int $attr <p>Attribute.</p>
* @param int $val <p>
* Attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_set_attribute(Collator $object, $attr, $val) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get current collation strength
* @link https://php.net/manual/en/collator.getstrength.php
* @param Collator $object
* @return int|false current collation strength, or boolean <b>FALSE</b> on error.
*/
function collator_get_strength(Collator $object) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set collation strength
* @link https://php.net/manual/en/collator.setstrength.php
* @param Collator $object
* @param int $strength <p>Strength to set.</p>
* <p>
* Possible values are:
* <p>
* <b>Collator::PRIMARY</b>
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_set_strength(Collator $object, $strength) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array using specified collator
* @link https://php.net/manual/en/collator.sort.php
* @param Collator $object
* @param array $arr <p>
* Array of strings to sort.
* </p>
* @param int $sort_flag [optional] <p>
* Optional sorting type, one of the following:
* </p>
* <p>
* <p>
* <b>Collator::SORT_REGULAR</b>
* - compare items normally (don't change types)
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_sort(Collator $object, array &$arr, $sort_flag = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array using specified collator and sort keys
* @link https://php.net/manual/en/collator.sortwithsortkeys.php
* @param Collator $object
* @param array $arr <p>Array of strings to sort</p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_sort_with_sort_keys(Collator $object, array &$arr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sort array maintaining index association
* @link https://php.net/manual/en/collator.asort.php
* @param Collator $object
* @param array $arr <p>Array of strings to sort.</p>
* @param int $sort_flag [optional] <p>
* Optional sorting type, one of the following:
* <p>
* <b>Collator::SORT_REGULAR</b>
* - compare items normally (don't change types)
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function collator_asort(Collator $object, array &$arr, $sort_flag = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale name of the collator
* @link https://php.net/manual/en/collator.getlocale.php
* @param Collator $object
* @param int $type [optional] <p>
* You can choose between valid and actual locale (
* <b>Locale::VALID_LOCALE</b> and
* <b>Locale::ACTUAL_LOCALE</b>,
* respectively). The default is the actual locale.
* </p>
* @return string Real locale name from which the collation data comes. If the collator was
* instantiated from rules or an error occurred, returns
* boolean <b>FALSE</b>.
*/
function collator_get_locale(Collator $object, $type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get collator's last error code
* @link https://php.net/manual/en/collator.geterrorcode.php
* @param Collator $object
* @return int Error code returned by the last Collator API function call.
*/
function collator_get_error_code(Collator $object) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get text for collator's last error code
* @link https://php.net/manual/en/collator.geterrormessage.php
* @param Collator $object
* @return string Description of an error occurred in the last Collator API function call.
*/
function collator_get_error_message(Collator $object) { }
/**
* (No version information available, might only be in SVN)<br/>
* Get sorting key for a string
* @link https://php.net/manual/en/collator.getsortkey.php
* @param Collator $object
* @param string $str <p>
* The string to produce the key from.
* </p>
* @return string the collation key for the string. Collation keys can be compared directly instead of strings.
*/
function collator_get_sort_key(Collator $object, $str) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a number formatter
* @link https://php.net/manual/en/numberformatter.create.php
* @param string $locale <p>
* Locale in which the number would be formatted (locale name, e.g. en_CA).
* </p>
* @param int $style <p>
* Style of the formatting, one of the
* format style constants. If
* <b>NumberFormatter::PATTERN_DECIMAL</b>
* or <b>NumberFormatter::PATTERN_RULEBASED</b>
* is passed then the number format is opened using the given pattern,
* which must conform to the syntax described in
* ICU DecimalFormat
* documentation or
* ICU RuleBasedNumberFormat
* documentation, respectively.
* </p>
* @param string $pattern [optional] <p>
* Pattern string if the chosen style requires a pattern.
* </p>
* @return NumberFormatter|false <b>NumberFormatter</b> object or <b>FALSE</b> on error.
*/
function numfmt_create($locale, $style, $pattern = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format a number
* @link https://php.net/manual/en/numberformatter.format.php
* @param NumberFormatter $fmt
* @param int|float $value <p>
* The value to format. Can be integer or float,
* other values will be converted to a numeric value.
* </p>
* @param int $type [optional] <p>
* The
* formatting type to use.
* </p>
* @return string|false the string containing formatted value, or <b>FALSE</b> on error.
*/
function numfmt_format(NumberFormatter $fmt, $value, $type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse a number
* @link https://php.net/manual/en/numberformatter.parse.php
* @param NumberFormatter $fmt
* @param string $value
* @param int $type [optional] <p>
* The
* formatting type to use. By default,
* <b>NumberFormatter::TYPE_DOUBLE</b> is used.
* </p>
* @param int $position [optional] <p>
* Offset in the string at which to begin parsing. On return, this value
* will hold the offset at which parsing ended.
* </p>
* @return mixed The value of the parsed number or <b>FALSE</b> on error.
*/
function numfmt_parse(NumberFormatter $fmt, $value, $type = null, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format a currency value
* @link https://php.net/manual/en/numberformatter.formatcurrency.php
* @param NumberFormatter $fmt
* @param float $value <p>
* The numeric currency value.
* </p>
* @param string $currency <p>
* The 3-letter ISO 4217 currency code indicating the currency to use.
* </p>
* @return string String representing the formatted currency value.
*/
function numfmt_format_currency(NumberFormatter $fmt, $value, $currency) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse a currency number
* @link https://php.net/manual/en/numberformatter.parsecurrency.php
* @param NumberFormatter $fmt
* @param string $value
* @param string $currency <p>
* Parameter to receive the currency name (3-letter ISO 4217 currency
* code).
* </p>
* @param int $position [optional] <p>
* Offset in the string at which to begin parsing. On return, this value
* will hold the offset at which parsing ended.
* </p>
* @return float|false The parsed numeric value or <b>FALSE</b> on error.
*/
function numfmt_parse_currency(NumberFormatter $fmt, $value, &$currency, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set an attribute
* @link https://php.net/manual/en/numberformatter.setattribute.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Attribute specifier - one of the
* numeric attribute constants.
* </p>
* @param int $value <p>
* The attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function numfmt_set_attribute(NumberFormatter $fmt, $attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get an attribute
* @link https://php.net/manual/en/numberformatter.getattribute.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Attribute specifier - one of the
* numeric attribute constants.
* </p>
* @return int|false Return attribute value on success, or <b>FALSE</b> on error.
*/
function numfmt_get_attribute(NumberFormatter $fmt, $attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set a text attribute
* @link https://php.net/manual/en/numberformatter.settextattribute.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Attribute specifier - one of the
* text attribute
* constants.
* </p>
* @param string $value <p>
* Text for the attribute value.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function numfmt_set_text_attribute(NumberFormatter $fmt, $attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get a text attribute
* @link https://php.net/manual/en/numberformatter.gettextattribute.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Attribute specifier - one of the
* text attribute constants.
* </p>
* @return string|false Return attribute value on success, or <b>FALSE</b> on error.
*/
function numfmt_get_text_attribute(NumberFormatter $fmt, $attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set a symbol value
* @link https://php.net/manual/en/numberformatter.setsymbol.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Symbol specifier, one of the
* format symbol constants.
* </p>
* @param string $value <p>
* Text for the symbol.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function numfmt_set_symbol(NumberFormatter $fmt, $attr, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get a symbol value
* @link https://php.net/manual/en/numberformatter.getsymbol.php
* @param NumberFormatter $fmt
* @param int $attr <p>
* Symbol specifier, one of the
* format symbol constants.
* </p>
* @return string|false The symbol string or <b>FALSE</b> on error.
*/
function numfmt_get_symbol(NumberFormatter $fmt, $attr) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set formatter pattern
* @link https://php.net/manual/en/numberformatter.setpattern.php
* @param NumberFormatter $fmt
* @param string $pattern <p>
* Pattern in syntax described in
* ICU DecimalFormat
* documentation.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function numfmt_set_pattern(NumberFormatter $fmt, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter pattern
* @link https://php.net/manual/en/numberformatter.getpattern.php
* @param NumberFormatter $fmt
* @param $nf
* @return string|false Pattern string that is used by the formatter, or <b>FALSE</b> if an error happens.
*/
function numfmt_get_pattern(NumberFormatter $fmt, $nf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter locale
* @link https://php.net/manual/en/numberformatter.getlocale.php
* @param NumberFormatter $fmt
* @param int $type [optional] <p>
* You can choose between valid and actual locale (
* <b>Locale::VALID_LOCALE</b>,
* <b>Locale::ACTUAL_LOCALE</b>,
* respectively). The default is the actual locale.
* </p>
* @return string The locale name used to create the formatter.
*/
function numfmt_get_locale(NumberFormatter $fmt, $type = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter's last error code.
* @link https://php.net/manual/en/numberformatter.geterrorcode.php
* @param NumberFormatter $fmt
* @param $nf
* @return int error code from last formatter call.
*/
function numfmt_get_error_code(NumberFormatter $fmt, $nf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get formatter's last error message.
* @link https://php.net/manual/en/numberformatter.geterrormessage.php
* @param NumberFormatter $fmt
* @param $nf
* @return string error message from last formatter call.
*/
function numfmt_get_error_message(NumberFormatter $fmt, $nf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Normalizes the input provided and returns the normalized string
* @link https://php.net/manual/en/normalizer.normalize.php
* @param string $input <p>The input string to normalize</p>
* @param string $form [optional] <p>One of the normalization forms.</p>
* @return string The normalized string or <b>NULL</b> if an error occurred.
*/
function normalizer_normalize($input, $form = Normalizer::FORM_C) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Checks if the provided string is already in the specified normalization
form.
* @link https://php.net/manual/en/normalizer.isnormalized.php
* @param string $input <p>The input string to normalize</p>
* @param string $form [optional] <p>
* One of the normalization forms.
* </p>
* @return bool <b>TRUE</b> if normalized, <b>FALSE</b> otherwise or if there an error
*/
function normalizer_is_normalized($input, $form = Normalizer::FORM_C) { }
/**
* Get the default Locale
* @link https://php.net/manual/en/function.locale-get-default.php
* @return string a string with the current Locale.
*/
function locale_get_default() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the default Locale
* @link https://php.net/manual/en/function.locale-set-default.php
* @param string $name <p>
* The new Locale name. A comprehensive list of the supported locales is
* available at .
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function locale_set_default($name) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the primary language for the input locale
* @link https://php.net/manual/en/locale.getprimarylanguage.php
* @param string $locale <p>
* The locale to extract the primary language code from
* </p>
* @return string The language code associated with the language or <b>NULL</b> in case of error.
*/
function locale_get_primary_language($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the script for the input locale
* @link https://php.net/manual/en/locale.getscript.php
* @param string $locale <p>
* The locale to extract the script code from
* </p>
* @return string The script subtag for the locale or <b>NULL</b> if not present
*/
function locale_get_script($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the region for the input locale
* @link https://php.net/manual/en/locale.getregion.php
* @param string $locale <p>
* The locale to extract the region code from
* </p>
* @return string The region subtag for the locale or <b>NULL</b> if not present
*/
function locale_get_region($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the keywords for the input locale
* @link https://php.net/manual/en/locale.getkeywords.php
* @param string $locale <p>
* The locale to extract the keywords from
* </p>
* @return array Associative array containing the keyword-value pairs for this locale
*/
function locale_get_keywords($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for script of the input locale
* @link https://php.net/manual/en/locale.getdisplayscript.php
* @param string $locale <p>
* The locale to return a display script for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the script name
* </p>
* @return string Display name of the script for the $locale in the format appropriate for
* $in_locale.
*/
function locale_get_display_script($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for region of the input locale
* @link https://php.net/manual/en/locale.getdisplayregion.php
* @param string $locale <p>
* The locale to return a display region for.
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the region name
* </p>
* @return string display name of the region for the $locale in the format appropriate for
* $in_locale.
*/
function locale_get_display_region($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for the input locale
* @link https://php.net/manual/en/locale.getdisplayname.php
* @param string $locale <p>
* The locale to return a display name for.
* </p>
* @param string $in_locale [optional] <p>optional format locale</p>
* @return string Display name of the locale in the format appropriate for $in_locale.
*/
function locale_get_display_name($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for language of the inputlocale
* @link https://php.net/manual/en/locale.getdisplaylanguage.php
* @param string $locale <p>
* The locale to return a display language for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the language name
* </p>
* @return string display name of the language for the $locale in the format appropriate for
* $in_locale.
*/
function locale_get_display_language($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns an appropriately localized display name for variants of the input locale
* @link https://php.net/manual/en/locale.getdisplayvariant.php
* @param string $locale <p>
* The locale to return a display variant for
* </p>
* @param string $in_locale [optional] <p>
* Optional format locale to use to display the variant name
* </p>
* @return string Display name of the variant for the $locale in the format appropriate for
* $in_locale.
*/
function locale_get_display_variant($locale, $in_locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns a correctly ordered and delimited locale ID
* @link https://php.net/manual/en/locale.composelocale.php
* @param array $subtags <p>
* an array containing a list of key-value pairs, where the keys identify
* the particular locale ID subtags, and the values are the associated
* subtag values.
* <p>
* The 'variant' and 'private' subtags can take maximum 15 values
* whereas 'extlang' can take maximum 3 values.e.g. Variants are allowed
* with the suffix ranging from 0-14. Hence the keys for the input array
* can be variant0, variant1, ...,variant14. In the returned locale id,
* the subtag is ordered by suffix resulting in variant0 followed by
* variant1 followed by variant2 and so on.
* </p>
* <p>
* The 'variant', 'private' and 'extlang' multiple values can be specified both
* as array under specific key (e.g. 'variant') and as multiple numbered keys
* (e.g. 'variant0', 'variant1', etc.).
* </p>
* </p>
* @return string The corresponding locale identifier.
*/
function locale_compose(array $subtags) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns a key-value array of locale ID subtag elements.
* @link https://php.net/manual/en/locale.parselocale.php
* @param string $locale <p>
* The locale to extract the subtag array from. Note: The 'variant' and
* 'private' subtags can take maximum 15 values whereas 'extlang' can take
* maximum 3 values.
* </p>
* @return array an array containing a list of key-value pairs, where the keys
* identify the particular locale ID subtags, and the values are the
* associated subtag values. The array will be ordered as the locale id
* subtags e.g. in the locale id if variants are '-varX-varY-varZ' then the
* returned array will have variant0=&gt;varX , variant1=&gt;varY ,
* variant2=&gt;varZ
*/
function locale_parse($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Gets the variants for the input locale
* @link https://php.net/manual/en/locale.getallvariants.php
* @param string $locale <p>
* The locale to extract the variants from
* </p>
* @return array The array containing the list of all variants subtag for the locale
* or <b>NULL</b> if not present
*/
function locale_get_all_variants($locale) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Checks if a language tag filter matches with locale
* @link https://php.net/manual/en/locale.filtermatches.php
* @param string $langtag <p>
* The language tag to check
* </p>
* @param string $locale <p>
* The language range to check against
* </p>
* @param bool $canonicalize [optional] <p>
* If true, the arguments will be converted to canonical form before
* matching.
* </p>
* @return bool <b>TRUE</b> if $locale matches $langtag <b>FALSE</b> otherwise.
*/
function locale_filter_matches($langtag, $locale, $canonicalize = false) { }
/**
* @param $arg1
*/
function locale_canonicalize($arg1) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Searches the language tag list for the best match to the language
* @link https://php.net/manual/en/locale.lookup.php
* @param array $langtag <p>
* An array containing a list of language tags to compare to
* <i>locale</i>. Maximum 100 items allowed.
* </p>
* @param string $locale <p>
* The locale to use as the language range when matching.
* </p>
* @param bool $canonicalize [optional] <p>
* If true, the arguments will be converted to canonical form before
* matching.
* </p>
* @param string $default [optional] <p>
* The locale to use if no match is found.
* </p>
* @return string The closest matching language tag or default value.
*/
function locale_lookup(array $langtag, $locale, $canonicalize = false, $default = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Tries to find out best available locale based on HTTP "Accept-Language" header
* @link https://php.net/manual/en/locale.acceptfromhttp.php
* @param string $header <p>
* The string containing the "Accept-Language" header according to format in RFC 2616.
* </p>
* @return string The corresponding locale identifier.
*/
function locale_accept_from_http($header) { }
/**
* @param $locale
* @param $pattern
*/
function msgfmt_create($locale, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format the message
* @link https://php.net/manual/en/messageformatter.format.php
* @param MessageFormatter $fmt
* @param array $args <p>
* Arguments to insert into the format string
* </p>
* @return string|false The formatted string, or <b>FALSE</b> if an error occurred
*/
function msgfmt_format(MessageFormatter $fmt, array $args) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Quick format message
* @link https://php.net/manual/en/messageformatter.formatmessage.php
* @param string $locale <p>
* The locale to use for formatting locale-dependent parts
* </p>
* @param string $pattern <p>
* The pattern string to insert things into.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @param array $args <p>
* The array of values to insert into the format string
* </p>
* @return string|false The formatted pattern string or <b>FALSE</b> if an error occurred
*/
function msgfmt_format_message(string $locale, string $pattern, array $args) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse input string according to pattern
* @link https://php.net/manual/en/messageformatter.parse.php
* @param MessageFormatter $fmt
* @param string $value <p>
* The string to parse
* </p>
* @return array|false An array containing the items extracted, or <b>FALSE</b> on error
*/
function msgfmt_parse(MessageFormatter $fmt, $value) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Quick parse input string
* @link https://php.net/manual/en/messageformatter.parsemessage.php
* @param MessageFormatter $fmt
* @param string $locale <p>
* The locale to use for parsing locale-dependent parts
* </p>
* @param string $pattern <p>
* The pattern with which to parse the <i>value</i>.
* </p>
* @param string $source <p>
* The string to parse, conforming to the <i>pattern</i>.
* </p>
* @return array|false An array containing items extracted, or <b>FALSE</b> on error
*/
function msgfmt_parse_message(MessageFormatter $fmt, $locale, $pattern, $source) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the pattern used by the formatter
* @link https://php.net/manual/en/messageformatter.setpattern.php
* @param MessageFormatter $fmt
* @param string $pattern <p>
* The pattern string to use in this message formatter.
* The pattern uses an 'apostrophe-friendly' syntax; it is run through
* umsg_autoQuoteApostrophe
* before being interpreted.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function msgfmt_set_pattern(MessageFormatter $fmt, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the pattern used by the formatter
* @link https://php.net/manual/en/messageformatter.getpattern.php
* @param MessageFormatter $fmt
* @param $mf
* @return string The pattern string for this message formatter
*/
function msgfmt_get_pattern(MessageFormatter $fmt, $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale for which the formatter was created.
* @link https://php.net/manual/en/messageformatter.getlocale.php
* @param MessageFormatter $fmt
* @param $mf
* @return string The locale name
*/
function msgfmt_get_locale(MessageFormatter $fmt, $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error code from last operation
* @link https://php.net/manual/en/messageformatter.geterrorcode.php
* @param MessageFormatter $fmt
* @param $nf
* @return int The error code, one of UErrorCode values. Initial value is U_ZERO_ERROR.
*/
function msgfmt_get_error_code(MessageFormatter $fmt, $nf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error text from the last operation
* @link https://php.net/manual/en/messageformatter.geterrormessage.php
* @param MessageFormatter $fmt
* @param $coll
* @return string Description of the last error.
*/
function msgfmt_get_error_message(MessageFormatter $fmt, $coll) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Create a date formatter
* @link https://php.net/manual/en/intldateformatter.create.php
* @param string|null $locale <p>
* Locale to use when formatting or parsing.
* </p>
* @param int $datetype <p>
* Date type to use (<b>none</b>,
* <b>short</b>, <b>medium</b>,
* <b>long</b>, <b>full</b>).
* This is one of the
* IntlDateFormatter constants.
* </p>
* @param int $timetype <p>
* Time type to use (<b>none</b>,
* <b>short</b>, <b>medium</b>,
* <b>long</b>, <b>full</b>).
* This is one of the
* IntlDateFormatter constants.
* </p>
* @param string|null $timezone [optional] <p>
* Time zone ID, default is system default.
* </p>
* @param int|null $calendar [optional] <p>
* Calendar to use for formatting or parsing; default is Gregorian.
* This is one of the
* IntlDateFormatter calendar constants.
* </p>
* @param string $pattern [optional] <p>
* Optional pattern to use when formatting or parsing.
* Possible patterns are documented at http://userguide.icu-project.org/formatparse/datetime.
* </p>
* @return IntlDateFormatter
*/
function datefmt_create($locale, $datetype, $timetype, $timezone = null, $calendar = null, $pattern = '') { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the datetype used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getdatetype.php
* @param $mf
* @return int The current date type value of the formatter.
*/
function datefmt_get_datetype(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the timetype used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.gettimetype.php
* @param $mf
* @return int The current date type value of the formatter.
*/
function datefmt_get_timetype(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the calendar used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getcalendar.php
* @param $mf
* @return int The calendar being used by the formatter.
*/
function datefmt_get_calendar(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* sets the calendar used to the appropriate calendar, which must be
* @link https://php.net/manual/en/intldateformatter.setcalendar.php
* @param MessageFormatter $mf
* @param int $which <p>
* The calendar to use.
* Default is <b>IntlDateFormatter::GREGORIAN</b>.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function datefmt_set_calendar(MessageFormatter $mf, $which) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the locale used by formatter
* @link https://php.net/manual/en/intldateformatter.getlocale.php
* @param MessageFormatter $mf
* @param int $which [optional]
* @return string|false the locale of this formatter or 'false' if error
*/
function datefmt_get_locale(MessageFormatter $mf, $which = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the timezone-id used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.gettimezoneid.php
* @param $mf
* @return string ID string for the time zone used by this formatter.
*/
function datefmt_get_timezone_id(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 3.0.0)<br/>
* Get copy of formatter's calendar object
* @link https://www.php.net/manual/en/intldateformatter.getcalendarobject.php
* @return IntlCalendar A copy of the internal calendar object used by this formatter.
*/
function datefmt_get_calendar_object() { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Get formatter's timezone
* @link https://www.php.net/manual/en/intldateformatter.gettimezone.php
* @return IntlTimeZone|false The associated IntlTimeZone object or FALSE on failure.
*/
function datefmt_get_timezone() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Sets the time zone to use
* @link https://php.net/manual/en/intldateformatter.settimezoneid.php
* @param MessageFormatter $mf
* @param string $zone <p>
* The time zone ID string of the time zone to use.
* If <b>NULL</b> or the empty string, the default time zone for the runtime is used.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
* @deprecated 5.5 https://www.php.net/manual/en/migration55.deprecated.php
* @removed 7.0
*/
function datefmt_set_timezone_id(MessageFormatter $mf, $zone) { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Sets formatter's timezone
* @link https://php.net/manual/en/intldateformatter.settimezone.php
* @param MessageFormatter $mf
* @param mixed $zone <p>
* The timezone to use for this formatter. This can be specified in the
* following forms:
* <ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link "https://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone" date.timezone} or
* through the function {@link "https://www.php.net/manual/en/function.date-default-timezone-set.php" date_default_timezone_set()} and as
* returned by {@link "https://www.php.net/manual/en/function.date-default-timezone-get.php" date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link "https://www.php.net/manual/en/class.intltimezone.php" IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link "https://www.php.net/manual/en/class.datetimezone.php" DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link "https://www.php.net/manual/en/language.types.string.php" string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function datefmt_set_timezone(MessageFormatter $mf, $zone) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the pattern used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.getpattern.php
* @param $mf
* @return string The pattern string being used to format/parse.
*/
function datefmt_get_pattern(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the pattern used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.setpattern.php
* @param MessageFormatter $mf
* @param string $pattern <p>
* New pattern string to use.
* Possible patterns are documented at http://userguide.icu-project.org/formatparse/datetime.
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
* Bad formatstrings are usually the cause of the failure.
*/
function datefmt_set_pattern(MessageFormatter $mf, $pattern) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the lenient used for the IntlDateFormatter
* @link https://php.net/manual/en/intldateformatter.islenient.php
* @param $mf
* @return bool <b>TRUE</b> if parser is lenient, <b>FALSE</b> if parser is strict. By default the parser is lenient.
*/
function datefmt_is_lenient(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Set the leniency of the parser
* @link https://php.net/manual/en/intldateformatter.setlenient.php
* @param MessageFormatter $mf
* @param bool $lenient <p>
* Sets whether the parser is lenient or not, default is <b>TRUE</b> (lenient).
* </p>
* @return bool <b>TRUE</b> on success or <b>FALSE</b> on failure.
*/
function datefmt_set_lenient(MessageFormatter $mf, $lenient) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Format the date/time value as a string
* @link https://php.net/manual/en/intldateformatter.format.php
* @param MessageFormatter $mf
* @param mixed $value <p>
* Value to format. This may be a <b>DateTime</b> object,
* an integer representing a Unix timestamp value (seconds
* since epoch, UTC) or an array in the format output by
* <b>localtime</b>.
* </p>
* @return string|false The formatted string or, if an error occurred, <b>FALSE</b>.
*/
function datefmt_format(MessageFormatter $mf, $value) { }
/**
* (PHP 5 &gt;= 5.5.0, PECL intl &gt;= 3.0.0)<br/>
* Formats an object
* @link https://www.php.net/manual/en/intldateformatter.formatobject.php
* @param object $object <p>
* An object of type IntlCalendar or DateTime. The timezone information in the object will be used.
* </p>
* @param mixed $format [optional] <p>
* How to format the date/time. This can either be an {https://www.php.net/manual/en/language.types.array.php array} with
* two elements (first the date style, then the time style, these being one
* of the constants <b>IntlDateFormatter::NONE</b>,
* <b>IntlDateFormatter::SHORT</b>,
* <b>IntlDateFormatter::MEDIUM</b>,
* <b>IntlDateFormatter::LONG</b>,
* <b>IntlDateFormatter::FULL</b>), a long with
* the value of one of these constants (in which case it will be used both
* for the time and the date) or a {@link https://www.php.net/manual/en/language.types.string.php} with the format
* described in {@link http://www.icu-project.org/apiref/icu4c/classSimpleDateFormat.html#details the ICU documentation}
* documentation. If <b>NULL</b>, the default style will be used.
* </p>
* @param string|null $locale [optional] <p>
* The locale to use, or NULL to use the default one.</p>
* @return string|false The formatted string or, if an error occurred, <b>FALSE</b>.
*/
function datefmt_format_object($object, $format = null, $locale = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse string to a timestamp value
* @link https://php.net/manual/en/intldateformatter.parse.php
* @param MessageFormatter $mf
* @param string $value <p>
* string to convert to a time
* </p>
* @param int $position [optional] <p>
* Position at which to start the parsing in $value (zero-based).
* If no error occurs before $value is consumed, $parse_pos will contain -1
* otherwise it will contain the position at which parsing ended (and the error occurred).
* This variable will contain the end position if the parse fails.
* If $parse_pos > strlen($value), the parse fails immediately.
* </p>
* @return int timestamp parsed value
*/
function datefmt_parse(MessageFormatter $mf, $value, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Parse string to a field-based time value
* @link https://php.net/manual/en/intldateformatter.localtime.php
* @param MessageFormatter $mf
* @param string $value <p>
* string to convert to a time
* </p>
* @param int $position [optional] <p>
* Position at which to start the parsing in $value (zero-based).
* If no error occurs before $value is consumed, $parse_pos will contain -1
* otherwise it will contain the position at which parsing ended .
* If $parse_pos > strlen($value), the parse fails immediately.
* </p>
* @return array Localtime compatible array of integers : contains 24 hour clock value in tm_hour field
*/
function datefmt_localtime(MessageFormatter $mf, $value, &$position = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error code from last operation
* @link https://php.net/manual/en/intldateformatter.geterrorcode.php
* @param MessageFormatter $mf
* @return int The error code, one of UErrorCode values. Initial value is U_ZERO_ERROR.
*/
function datefmt_get_error_code(MessageFormatter $mf) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the error text from the last operation.
* @link https://php.net/manual/en/intldateformatter.geterrormessage.php
* @param MessageFormatter $mf
* @param $coll
* @return string Description of the last error.
*/
function datefmt_get_error_message(MessageFormatter $mf, $coll) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get string length in grapheme units
* @link https://php.net/manual/en/function.grapheme-strlen.php
* @param string $input <p>
* The string being measured for length. It must be a valid UTF-8 string.
* </p>
* @return int|false|null The length of the string on success, and 0 if the string is empty.
*/
function grapheme_strlen($input) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Find position (in grapheme units) of first occurrence of a string
* @link https://php.net/manual/en/function.grapheme-strpos.php
* @param string $haystack <p>
* The string to look in. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param int $offset [optional] <p>
* The optional $offset parameter allows you to specify where in $haystack to
* start searching as an offset in grapheme units (not bytes or characters).
* The position returned is still relative to the beginning of haystack
* regardless of the value of $offset.
* </p>
* @return int|false the position as an integer. If needle is not found, strpos() will return boolean FALSE.
*/
function grapheme_strpos($haystack, $needle, $offset = 0) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Find position (in grapheme units) of first occurrence of a case-insensitive string
* @link https://php.net/manual/en/function.grapheme-stripos.php
* @param string $haystack <p>
* The string to look in. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param int $offset [optional] <p>
* The optional $offset parameter allows you to specify where in haystack to
* start searching as an offset in grapheme units (not bytes or characters).
* The position returned is still relative to the beginning of haystack
* regardless of the value of $offset.
* </p>
* @return int|false the position as an integer. If needle is not found, grapheme_stripos() will return boolean FALSE.
*/
function grapheme_stripos($haystack, $needle, $offset = 0) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Find position (in grapheme units) of last occurrence of a string
* @link https://php.net/manual/en/function.grapheme-strrpos.php
* @param string $haystack <p>
* The string to look in. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param int $offset [optional] <p>
* The optional $offset parameter allows you to specify where in $haystack to
* start searching as an offset in grapheme units (not bytes or characters).
* The position returned is still relative to the beginning of haystack
* regardless of the value of $offset.
* </p>
* @return int|false the position as an integer. If needle is not found, grapheme_strrpos() will return boolean FALSE.
*/
function grapheme_strrpos($haystack, $needle, $offset = 0) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Find position (in grapheme units) of last occurrence of a case-insensitive string
* @link https://php.net/manual/en/function.grapheme-strripos.php
* @param string $haystack <p>
* The string to look in. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param int $offset [optional] <p>
* The optional $offset parameter allows you to specify where in $haystack to
* start searching as an offset in grapheme units (not bytes or characters).
* The position returned is still relative to the beginning of haystack
* regardless of the value of $offset.
* </p>
* @return int|false the position as an integer. If needle is not found, grapheme_strripos() will return boolean FALSE.
*/
function grapheme_strripos($haystack, $needle, $offset = 0) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Return part of a string
* @link https://php.net/manual/en/function.grapheme-substr.php
* @param string $string <p>
* The input string. Must be valid UTF-8.
* </p>
* @param int $start <p>
* Start position in default grapheme units.
* If $start is non-negative, the returned string will start at the
* $start'th position in $string, counting from zero. If $start is negative,
* the returned string will start at the $start'th grapheme unit from the
* end of string.
* </p>
* @param int $length [optional] <p>
* Length in grapheme units.
* If $length is given and is positive, the string returned will contain
* at most $length grapheme units beginning from $start (depending on the
* length of string). If $length is given and is negative, then
* that many grapheme units will be omitted from the end of string (after the
* start position has been calculated when a start is negative). If $start
* denotes a position beyond this truncation, <b>FALSE</b> will be returned.
* </p>
* @return string|false <p>the extracted part of $string,<br />
or <strong>FALSE</strong> if $length is negative and $start denotes a position beyond truncation $length,<br />
or also <strong>FALSE</strong> if $start denotes a position beyond $string length</p>
*/
function grapheme_substr($string, $start, $length = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns part of haystack string from the first occurrence of needle to the end of haystack.
* @link https://php.net/manual/en/function.grapheme-strstr.php
* @param string $haystack <p>
* The input string. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param bool $before_needle [optional] <p>
* If <b>TRUE</b>, grapheme_strstr() returns the part of the
* haystack before the first occurrence of the needle (excluding the needle).
* </p>
* @return string|false the portion of string, or FALSE if needle is not found.
*/
function grapheme_strstr($haystack, $needle, $before_needle = false) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Returns part of haystack string from the first occurrence of case-insensitive needle to the end of haystack.
* @link https://php.net/manual/en/function.grapheme-stristr.php
* @param string $haystack <p>
* The input string. Must be valid UTF-8.
* </p>
* @param string $needle <p>
* The string to look for. Must be valid UTF-8.
* </p>
* @param bool $before_needle [optional] <p>
* If <b>TRUE</b>, grapheme_strstr() returns the part of the
* haystack before the first occurrence of the needle (excluding needle).
* </p>
* @return string|false the portion of $haystack, or FALSE if $needle is not found.
*/
function grapheme_stristr($haystack, $needle, $before_needle = false) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Function to extract a sequence of default grapheme clusters from a text buffer, which must be encoded in UTF-8.
* @link https://php.net/manual/en/function.grapheme-extract.php
* @param string $haystack <p>
* String to search.
* </p>
* @param int $size <p>
* Maximum number items - based on the $extract_type - to return.
* </p>
* @param int $extract_type [optional] <p>
* Defines the type of units referred to by the $size parameter:
* </p>
* <p>
* GRAPHEME_EXTR_COUNT (default) - $size is the number of default
* grapheme clusters to extract.
* GRAPHEME_EXTR_MAXBYTES - $size is the maximum number of bytes
* returned.
* GRAPHEME_EXTR_MAXCHARS - $size is the maximum number of UTF-8
* characters returned.
* </p>
* @param int $start [optional] <p>
* Starting position in $haystack in bytes - if given, it must be zero or a
* positive value that is less than or equal to the length of $haystack in
* bytes. If $start does not point to the first byte of a UTF-8
* character, the start position is moved to the next character boundary.
* </p>
* @param int $next [optional] <p>
* Reference to a value that will be set to the next starting position.
* When the call returns, this may point to the first byte position past the end of the string.
* </p>
* @return string|false A string starting at offset $start and ending on a default grapheme cluster
* boundary that conforms to the $size and $extract_type specified.
*/
function grapheme_extract($haystack, $size, $extract_type = null, $start = 0, &$next = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PHP 7, PECL intl &gt;= 1.0.2, PHP 7, PECL idn &gt;= 0.1)<br/>
* Convert domain name to IDNA ASCII form.
* @link https://php.net/manual/en/function.idn-to-ascii.php
* @param string $domain <p>
* Domain to convert. In PHP 5 must be UTF-8 encoded.
* If e.g. an ISO-8859-1 (aka Western Europe latin1) encoded string is
* passed it will be converted into an ACE encoded "xn--" string.
* It will not be the one you expected though!
* </p>
* @param int $options [optional] <p>
* Conversion options - combination of IDNA_* constants (except IDNA_ERROR_* constants).
* </p>
* @param int $variant [optional] <p>
* Either INTL_IDNA_VARIANT_2003 for IDNA 2003 or INTL_IDNA_VARIANT_UTS46 for UTS #46.
* </p>
* @param array $idna_info [optional] <p>
* This parameter can be used only if INTL_IDNA_VARIANT_UTS46 was used for variant.
* In that case, it will be filled with an array with the keys 'result',
* the possibly illegal result of the transformation, 'isTransitionalDifferent',
* a boolean indicating whether the usage of the transitional mechanisms of UTS #46
* either has or would have changed the result and 'errors',
* which is an int representing a bitset of the error constants IDNA_ERROR_*.
* </p>
* @return string|false The ACE encoded version of the domain name or <b>FALSE</b> on failure.
*/
function idn_to_ascii($domain, $options = 0, $variant = INTL_IDNA_VARIANT_2003, array &$idna_info = null) { }
/**
* (PHP 5 &gt;= 5.3.0, PHP 7, PECL intl &gt;= 1.0.2, PHP 7, PECL idn &gt;= 0.1)<br/>
* Convert domain name from IDNA ASCII to Unicode.
* @link https://php.net/manual/en/function.idn-to-utf8.php
* @param string $domain <p>
* Domain to convert in IDNA ASCII-compatible format.
* The ASCII encoded domain name. Looks like "xn--..." if the it originally contained non-ASCII characters.
* </p>
* @param int $options [optional] <p>
* Conversion options - combination of IDNA_* constants (except IDNA_ERROR_* constants).
* </p>
* @param int $variant [optional] <p>
* Either INTL_IDNA_VARIANT_2003 for IDNA 2003 or INTL_IDNA_VARIANT_UTS46 for UTS #46.
* </p>
* @param int &$idna_info [optional] <p>
* This parameter can be used only if INTL_IDNA_VARIANT_UTS46 was used for variant.
* In that case, it will be filled with an array with the keys 'result',
* the possibly illegal result of the transformation, 'isTransitionalDifferent',
* a boolean indicating whether the usage of the transitional mechanisms of UTS #46
* either has or would have changed the result and 'errors',
* which is an int representing a bitset of the error constants IDNA_ERROR_*.
* </p>
* @return string|false The UTF-8 encoded version of the domain name or <b>FALSE</b> on failure.
* RFC 3490 4.2 states though "ToUnicode never fails. If any step fails, then the original input
* sequence is returned immediately in that step."
*/
function idn_to_utf8($domain, $options = 0, $variant = INTL_IDNA_VARIANT_2003, array &$idna_info) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a new IntlCalendar
* @link https://www.php.net/manual/en/intlcalendar.createinstance.php
* @param mixed $timeZone [optional] <p> <p>
* The timezone to use.
* </p>
*
* <ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link https://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone} or
* through the function {@link https://www.php.net/manual/en/function.date-default-timezone-set.php date_default_timezone_set()} and as
* returned by {@link https://www.php.net/manual/en/function.date-default-timezone-get.php date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link https://www.php.net/manual/en/class.intltimezone.php IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link https://www.php.net/manual/en/class.datetimezone.php DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link https://www.php.net/manual/en/language.types.string.php string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw
* offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* </p>
* @param string $locale [optional] <p>
* A locale to use or <b>NULL</b> to use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.default-locale the default locale}.
* </p>
* @return IntlCalendar
* The created {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} instance or <b>NULL</b> on
* failure.
* @since 5.5
*/
function intlcal_create_instance($timeZone = null, $locale = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get set of locale keyword values
* @param string $key <p>
* The locale keyword for which relevant values are to be queried. Only
* <em>'calendar'</em> is supported.
* </p>
* @param string $locale <p>
* The locale onto which the keyword/value pair are to be appended.
* </p>
* @param bool $commonlyUsed
* <p>
* Whether to show only the values commonly used for the specified locale.
* </p>
* @return Iterator|false An iterator that yields strings with the locale keyword values or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_keyword_values_for_locale($key, $locale, $commonlyUsed) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get number representing the current time
* @link https://www.php.net/manual/en/intlcalendar.getnow.php
* @return float A float representing a number of milliseconds since the epoch, not counting leap seconds.
* @since 5.5
*/
function intlcal_get_now() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get array of locales for which there is data
* @link https://www.php.net/manual/en/intlcalendar.getavailablelocales.php
* @return array An array of strings, one for which locale.
* @since 5.5
*/
function intlcal_get_available_locales() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the value for a field
* @link https://www.php.net/manual/en/intlcalendar.get.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int An integer with the value of the time field.
* @since 5.5
*/
function intl_get($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get time currently represented by the object
* @param IntlCalendar $calendar <p>The calendar whose time will be checked against this object's time.</p>
* @return float
* A {@link https://www.php.net/manual/en/language.types.float.php float} representing the number of milliseconds elapsed since the
* reference time (1 Jan 1970 00:00:00 UTC).
* @since 5.5
*/
function intlcal_get_time($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the calendar time in milliseconds since the epoch
* @link https://www.php.net/manual/en/intlcalendar.settime.php
* @param float $date <p>
* An instant represented by the number of number of milliseconds between
* such instant and the epoch, ignoring leap seconds.
* </p>
* @return bool
* Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_set_time($date) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Add a (signed) amount of time to a field
* @link https://www.php.net/manual/en/intlcalendar.add.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param int $amount <p>The signed amount to add to the current field. If the amount is positive, the instant will be moved forward; if it is negative, the instant wil be moved into the past. The unit is implicit to the field type.
* For instance, hours for IntlCalendar::FIELD_HOUR_OF_DAY.</p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_add($calendar, $field, $amount) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the timezone used by this calendar
* @link https://www.php.net/manual/en/intlcalendar.settimezone.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param mixed $timeZone <p>
* The new timezone to be used by this calendar. It can be specified in the
* following ways:
*
* </p><ul>
* <li>
* <p>
* <b>NULL</b>, in which case the default timezone will be used, as specified in
* the ini setting {@link https://www.php.net/manual/en/datetime.configuration.php#ini.date.timezone date.timezone} or
* through the function {@link https://www.php.net/manual/en/function.date-default-timezone-set.php date_default_timezone_set()} and as
* returned by {@link https://www.php.net/manual/en/function.date-default-timezone-get.php date_default_timezone_get()}.
* </p>
* </li>
* <li>
* <p>
* An {@link https://www.php.net/manual/en/class.intltimezone.php IntlTimeZone}, which will be used directly.
* </p>
* </li>
* <li>
* <p>
* A {@link https://www.php.net/manual/en/class.datetimezone.php DateTimeZone}. Its identifier will be extracted
* and an ICU timezone object will be created; the timezone will be backed
* by ICU's database, not PHP's.
* </p>
* </li>
* <li>
* <p>
* A {@link https://www.php.net/manual/en/language.types.string.php string}, which should be a valid ICU timezone identifier.
* See <b>IntlTimeZone::createTimeZoneIDEnumeration()</b>. Raw
* offsets such as <em>"GMT+08:30"</em> are also accepted.
* </p>
* </li>
* </ul>
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_set_time_zone($calendar, $timeZone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether this object's time is after that of the passed object
* https://www.php.net/manual/en/intlcalendar.after.php
* @param IntlCalendar $calendarObject <p>
* The calendar object, on the procedural style interface.
* </p>
* @param IntlCalendar $calendar <p>The calendar whose time will be checked against this object's time.</p>
* @return bool
* Returns <b>TRUE</b> if this object's current time is after that of the
* <em>calendar</em> argument's time. Returns <b>FALSE</b> otherwise.
* Also returns <b>FALSE</b> on failure. You can use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or
* {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to detect error conditions.
* @since 5.5
*/
function intlcal_after(IntlCalendar $calendarObject, IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether this object's time is before that of the passed object
* @link https://www.php.net/manual/en/intlcalendar.before.php
* @param IntlCalendar $calendarObject <p>
* The calendar object, on the procedural style interface.
* </p>
* @param IntlCalendar $calendar <p> The calendar whose time will be checked against this object's time.</p>
* @return bool
* Returns <b>TRUE</B> if this object's current time is before that of the
* <em>calendar</em> argument's time. Returns <b>FALSE</b> otherwise.
* Also returns <b>FALSE</b> on failure. You can use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or
* {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to detect error conditions.
* </p>
* @since 5.5
*/
function intlcal_before(IntlCalendar $calendarObject, IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set a time field or several common fields at once
* @link https://www.php.net/manual/en/intlcalendar.set.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $year <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param int $month <p>
* The new value for <b>IntlCalendar::FIELD_MONTH</b>.
* </p>
* @param int $dayOfMonth [optional] <p>
* The new value for <b>IntlCalendar::FIELD_DAY_OF_MONTH</b>.
* The month sequence is zero-based, i.e., January is represented by 0,
* February by 1, ..., December is 11 and Undecember (if the calendar has
* it) is 12.
* </p>
* @param int $hour [optional]
* <p>
* The new value for <b>IntlCalendar::FIELD_HOUR_OF_DAY</b>.
* </p>
* @param int $minute [optional]
* <p>
* The new value for <b>IntlCalendar::FIELD_MINUTE</b>.
* </p>
* @param int $second [optional] <p>
* The new value for <b>IntlCalendar::FIELD_SECOND</b>.
*</p>
* @return bool Returns <b>TRUE</b> on success and <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_set($calendar, $year, $month, $dayOfMonth = null, $hour = null, $minute = null, $second = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Add value to field without carrying into more significant fields
* @link https://www.php.net/manual/en/intlcalendar.roll.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>One of the
* {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time
* {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @param mixed $amountOrUpOrDown <p>
* The (signed) amount to add to the field, <b>TRUE</b> for rolling up (adding
* <em>1</em>), or <b>FALSE</b> for rolling down (subtracting
* <em>1</em>).
* </p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_roll($calendar, $field, $amountOrUpOrDown) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Clear a field or all fields
* @link https://www.php.net/manual/en/intlcalendar.clear.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field [optional] <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return bool Returns <b>TRUE</b> on success or <b>FALSE</b> on failure. Failure can only occur is invalid arguments are provided.
* @since 5.5
*/
function intlcal_clear($calendar, $field = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Calculate difference between given time and this object's time
* @link https://www.php.net/manual/en/intlcalendar.fielddifference.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param float $when <p>
* The time against which to compare the quantity represented by the
* <em>field</em>. For the result to be positive, the time
* given for this parameter must be ahead of the time of the object the
* method is being invoked on.
* </p>
* @param int $field <p>
* The field that represents the quantity being compared.
* </p>
*
* <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int Returns a (signed) difference of time in the unit associated with the
* specified field or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_field_difference($calendar, $when, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* The maximum value for a field, considering the object's current time
* @link https://www.php.net/manual/en/intlcalendar.getactualmaximum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing the maximum value in the units associated
* with the given <em>field</em> or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_actual_maximum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* The minimum value for a field, considering the object's current time
* @link https://www.php.net/manual/en/intlcalendar.getactualminimum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}.
* These are integer values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing the minimum value in the field's
* unit or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_actual_minimum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://www.php.net/manual/en/intlcalendar.getdayofweektype.php
* Tell whether a day is a weekday, weekend or a day that has a transition between the two
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return int
* Returns one of the constants
* <b>IntlCalendar::DOW_TYPE_WEEKDAY</b>,
* <b>IntlCalendar::DOW_TYPE_WEEKEND</b>,
* <b>IntlCalendar::DOW_TYPE_WEEKEND_OFFSET</b> or
* <b>IntlCalendar::DOW_TYPE_WEEKEND_CEASE</b> or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_day_of_week_type($calendar, $dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the first day of the week for the calendar's locale
* @link https://www.php.net/manual/en/intlcalendar.getfirstdayofweek.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b> or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_first_day_of_week($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the largest local minimum value for a field
* @link https://www.php.net/manual/en/intlcalendar.getgreatestminimum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing a field value, in the field's
* unit, or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_greates_minimum($calendar, $field) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get data from the bundle
* @link https://php.net/manual/en/resourcebundle.get.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param string|int $index <p>
* Data index, must be string or integer.
* </p>
* @return mixed the data located at the index or <b>NULL</b> on error. Strings, integers and binary data strings
* are returned as corresponding PHP types, integer array is returned as PHP array. Complex types are
* returned as <b>ResourceBundle</b> object.
*/
function intlcal_get($calendar, $index) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the smallest local maximum for a field
* @link https://www.php.net/manual/en/intlcalendar.getleastmaximum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.ph int} representing a field value in the field's
* unit or <b>FALSE</b> on failure.
* </p>
* @since 5.5
*/
function intlcal_get_least_maximum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the largest local minimum value for a field
* @link https://www.php.net/manual/en/intlcalendar.getgreatestminimum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing a field value, in the field's
* unit, or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_greatest_minimum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the locale associated with the object
* @link https://www.php.net/manual/en/intlcalendar.getlocale.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $localeType <p>
* Whether to fetch the actual locale (the locale from which the calendar
* data originates, with <b>Locale::ACTUAL_LOCALE</b>) or the
* valid locale, i.e., the most specific locale supported by ICU relatively
* to the requested locale see <b>Locale::VALID_LOCALE</b>.
* From the most general to the most specific, the locales are ordered in
* this fashion actual locale, valid locale, requested locale.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_locale($calendar, $localeType) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global maximum value for a field
* @link https://www.php.net/manual/en/intlcalendar.getmaximum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
* @since 5.5
*/
function intcal_get_maximum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://www.php.net/manual/en/intlcalendar.getminimaldaysinfirstweek.php
* Get minimal number of days the first week in a year or month can have
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int
* An {@link https://www.php.net/manual/en/language.types.integer.php int} representing a number of days or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_minimal_days_in_first_week($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global minimum value for a field
* @link https://www.php.net/manual/en/intlcalendar.getminimum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return int
* An int representing a value for the given field in the field's unit or FALSE on failure.
* @since 5.5
*/
function intlcal_get_minimum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the object's timezone
* @link https://www.php.net/manual/en/intlcalendar.gettimezone.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return IntlTimeZone
* An {@link https://www.php.net/manual/en/class.intltimezone.php IntlTimeZone} object corresponding to the one used
* internally in this object.
* @since 5.5
*/
function intlcal_get_time_zone($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the calendar type
* @link https://www.php.net/manual/en/intlcalendar.gettype.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return string
* A {@link https://www.php.net/manual/en/language.types.string.php string} representing the calendar type, such as
* <em>'gregorian'</em>, <em>'islamic'</em>, etc.
* @since 5.5
*/
function intlcal_get_type($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get time of the day at which weekend begins or ends
* @link https://www.php.net/manual/en/intlcalendar.getweekendtransition.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param string $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return int
* The number of milliseconds into the day at which the the weekend begins or
* ends or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_weekend_transition($calendar, $dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether the object's time is in Daylight Savings Time
* @link https://www.php.net/manual/en/intlcalendar.indaylighttime.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return bool
* Returns <b>TRUE</b> if the date is in Daylight Savings Time, <b>FALSE</b> otherwise.
* The value <b>FALSE</b> may also be returned on failure, for instance after
* specifying invalid field values on non-lenient mode; use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or query
* {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to disambiguate.
* @since 5.5
*/
function intlcal_in_daylight_time($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether date/time interpretation is in lenient mode
* @link https://www.php.net/manual/en/intlcalendar.islenient.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return bool
* A {@link https://www.php.net/manual/en/language.types.boolean.php bool} representing whether the calendar is set to lenient mode.
* @since 5.5
*/
function intlcal_is_lenient($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether a field is set
* @link https://www.php.net/manual/en/intlcalendar.isset.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return bool Assuming there are no argument errors, returns <b>TRUE</b> iif the field is set.
* @since 5.5
*/
function intlcal_is_set($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the global maximum value for a field
* @link https://www.php.net/manual/en/intlcalendar.getmaximum.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $field <p>
* One of the {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} date/time {@link https://www.php.net/manual/en/class.intlcalendar.php#intlcalendar.constants field constants}. These are integer
* values between <em>0</em> and
* <b>IntlCalendar::FIELD_COUNT</b>.
* </p>
* @return string
* A locale string or <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_get_maximum($calendar, $field) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether another calendar is equal but for a different time
* @link https://www.php.net/manual/en/intlcalendar.isequivalentto.php
* @param IntlCalendar $calendarObject <p>
* The calendar object, on the procedural style interface.
* </p>
* @param IntlCalendar $calendar The other calendar against which the comparison is to be made.
* @return bool
* Assuming there are no argument errors, returns <b>TRUE</b> iif the calendars are equivalent except possibly for their set time.
* @since 5.5
*/
function intlcal_is_equivalent_to(IntlCalendar $calendarObject, IntlCalendar $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Whether a certain date/time is in the weekend
* @link https://www.php.net/manual/en/intlcalendar.isweekend.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param float|null $date [optional] <p>
* An optional timestamp representing the number of milliseconds since the
* epoch, excluding leap seconds. If <b>NULL</b>, this object's current time is
* used instead.
* </p>
* @return bool
* <p> A {@link https://www.php.net/manual/en/language.types.boolean.php bool} indicating whether the given or this object's time occurs
* in a weekend.
* </p>
* <p>
* The value <b>FALSE</b> may also be returned on failure, for instance after giving
* a date out of bounds on non-lenient mode; use {@link https://www.php.net/manual/en/intl.configuration.php#ini.intl.use-exceptions exceptions} or query
* {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()} to disambiguate.</p>
* @since 5.5
*/
function intlcal_is_weekend($calendar, $date = null) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set the day on which the week is deemed to start
* @link https://www.php.net/manual/en/intlcalendar.setfirstdayofweek.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $dayOfWeek <p>
* One of the constants <b>IntlCalendar::DOW_SUNDAY</b>,
* <b>IntlCalendar::DOW_MONDAY</b>, ...,
* <b>IntlCalendar::DOW_SATURDAY</b>.
* </p>
* @return bool Returns TRUE on success. Failure can only happen due to invalid parameters.
* @since 5.5
*/
function intlcal_set_first_day_of_week($calendar, $dayOfWeek) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set whether date/time interpretation is to be lenient
* @link https://www.php.net/manual/en/intlcalendar.setlenient.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param string $isLenient <p>
* Use <b>TRUE</b> to activate the lenient mode; <b>FALSE</b> otherwise.
* </p>
* @return bool Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
* @since 5.5
*/
function intlcal_set_lenient($calendar, $isLenient) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get behavior for handling repeating wall time
* @link https://www.php.net/manual/en/intlcalendar.getrepeatedwalltimeoption.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b> or
* <b>IntlCalendar::WALLTIME_LAST</b>.
* @since 5.5
*/
function intlcal_get_repeated_wall_time_option($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Compare time of two IntlCalendar objects for equality
* @link https://www.php.net/manual/en/intlcalendar.equals.php
* @param IntlCalendar $calendarObject <p>
* The calendar object, on the procedural style interface.
* </p>
* @param IntlCalendar $calendar
* @return bool <p>
* Returns <b>TRUE</b> if the current time of both this and the passed in
* {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} object are the same, or <b>FALSE</b>
* otherwise. The value <b>FALSE</b> can also be returned on failure. This can only
* happen if bad arguments are passed in. In any case, the two cases can be
* distinguished by calling {@link https://www.php.net/manual/en/function.intl-get-error-code.php intl_get_error_code()}.
* </p>
* @since 5.5
*/
function intlcal_equals($calendarObject, $calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get behavior for handling skipped wall time
* @link https://www.php.net/manual/en/intlcalendar.getskippedwalltimeoption.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b>,
* <b>IntlCalendar::WALLTIME_LAST</b> or
* <b>IntlCalendar::WALLTIME_NEXT_VALID</b>.
* @since 5.5
*/
function intlcal_get_skipped_wall_time_option($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set behavior for handling repeating wall times at negative timezone offset transitions
* @link https://www.php.net/manual/en/intlcalendar.setrepeatedwalltimeoption.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $wallTimeOption <p>
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b> or
* <b>IntlCalendar::WALLTIME_LAST</b>.
* </p>
* @return bool
* Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
* @since 5.5
*/
function intlcal_set_repeated_wall_time_option($calendar, $wallTimeOption) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Set behavior for handling skipped wall times at positive timezone offset transitions
* @link https://www.php.net/manual/en/intlcalendar.setskippedwalltimeoption.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @param int $wallTimeOption <p>
* One of the constants <b>IntlCalendar::WALLTIME_FIRST</b>,
* <b>IntlCalendar::WALLTIME_LAST</b> or
* <b>IntlCalendar::WALLTIME_NEXT_VALID</b>.
* </p>
* @return bool
* <p>
* Returns <b>TRUE</b> on success. Failure can only happen due to invalid parameters.
* </p>
* @since 5.5
*/
function intlcal_set_skipped_wall_time_option($calendar, $wallTimeOption) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a2)<br/>
* Create an IntlCalendar from a DateTime object or string
* @link https://www.php.net/manual/en/intlcalendar.fromdatetime.php
* @param mixed $dateTime <p>
* A {@link https://www.php.net/manual/en/class.datetime.php DateTime} object or a {@link https://www.php.net/manual/en/language.types.string.php string} that
* can be passed to {@link https://www.php.net/manual/en/datetime.construct.php DateTime::__construct()}.
* </p>
* @return IntlCalendar
* The created {@link https://www.php.net/manual/en/class.intlcalendar.php IntlCalendar} object or <b>NULL</b> in case of
* failure. If a {@link https://www.php.net/manual/en/language.types.string.php string} is passed, any exception that occurs
* inside the {@link https://www.php.net/manual/en/class.datetime.php DateTime} constructor is propagated.
* @since 5.5
*/
function intlcal_from_date_time($dateTime) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a2)<br/>
* Convert an IntlCalendar into a DateTime object
* @link https://www.php.net/manual/en/intlcalendar.todatetime.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return DateTime|false
* A {@link https://www.php.net/manual/en/class.datetime.php DateTime} object with the same timezone as this
* object (though using PHP's database instead of ICU's) and the same time,
* except for the smaller precision (second precision instead of millisecond).
* Returns <b>FALSE</b> on failure.
* @since 5.5
*/
function intlcal_to_date_time($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error code on the object
* @link https://www.php.net/manual/en/intlcalendar.geterrorcode.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return int An ICU error code indicating either success, failure or a warning.
* @since 5.5
*/
function intlcal_get_error_code($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error message on the object
* @link https://www.php.net/manual/en/intlcalendar.geterrormessage.php
* @param IntlCalendar $calendar <p>
* The calendar object, on the procedural style interface.
* </p>
* @return string The error message associated with last error that occurred in a function call on this object, or a string indicating the non-existance of an error.
* @since 5.5
*/
function intlcal_get_error_message($calendar) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the number of IDs in the equivalency group that includes the given ID
* @link https://www.php.net/manual/en/intltimezone.countequivalentids.php
* @param string $zoneId
* @return int
* @since 5.5
*/
function intltz_count_equivalent_ids($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create a new copy of the default timezone for this host
* @link https://www.php.net/manual/en/intltimezone.createdefault.php
* @return IntlTimeZone
* @since 5.5
*/
function intlz_create_default() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://www.php.net/manual/en/intltimezone.createenumeration.php
* @param mixed $countryOrRawOffset [optional]
* @return IntlIterator
* @since 5.5
*/
function intltz_create_enumeration($countryOrRawOffset) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://www.php.net/manual/en/intltimezone.createtimezone.php
* @param string $zoneId
* @return IntlTimeZone
* @since 5.5
*/
function intltz_create_time_zone($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @link https://www.php.net/manual/en/intltimezone.fromdatetimezone.php
* @param DateTimeZone $zoneId
* @return IntlTimeZone
* @since 5.5
*/
function intltz_from_date_time_zone($zoneId) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the canonical system timezone ID or the normalized custom time zone ID for the given time zone ID
* @link https://www.php.net/manual/en/intltimezone.getcanonicalid.php
* @param string $zoneId
* @param bool $isSystemID [optional]
* @return string
* @since 5.5
*/
function intltz_get_canonical_id($zoneId, &$isSystemID) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get a name of this time zone suitable for presentation to the user
* @param IntlTimeZone $obj - <p>
* The time zone object, on the procedural style interface.
* </p>
* @param bool $isDaylight [optional]
* @param int $style [optional]
* @param string $locale [optional]
* @return string
* @since 5.5
*/
function intltz_get_display_name($obj, $isDaylight, $style, $locale) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the amount of time to be added to local standard time to get local wall clock time
* @param IntlTimeZone $obj - <p>
* The time zone object, on the procedural style interface.
* </p>
* @link https://www.php.net/manual/en/intltimezone.getequivalentid.php
* @return int
* @since 5.5
*/
function intltz_get_dst_savings($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get an ID in the equivalency group that includes the given ID
* @link https://www.php.net/manual/en/intltimezone.getequivalentid.php
* @param string $zoneId
* @param int $index
* @return string
* @since 5.5
*/
function intltz_get_equivalent_id($zoneId, $index) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error code on the object
* @link https://www.php.net/manual/en/intltimezone.geterrorcode.php
* @param IntlTimeZone $obj - <p>
* The time zone object, on the procedural style interface.
* </p>
* @return int
* @since 5.5
*/
function intltz_get_error_code($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get last error message on the object
* @link https://www.php.net/manual/en/intltimezone.geterrormessage.php
* @param IntlTimeZone $obj - <p>
* The time zone object, on the procedural style interface.
* </p>
* @return string
* @since 5.5
*/
function intltz_get_error_message($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Create GMT (UTC) timezone
* @link https://www.php.net/manual/en/intltimezone.getgmt.php
* @return IntlTimeZone
* @since 5.5
*/
function intltz_getGMT() { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get timezone ID
* @link https://www.php.net/manual/en/intltimezone.getid.php
* @param IntlTimeZone $obj
* @return string
* @since 5.5
*/
function intltz_get_id($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the time zone raw and GMT offset for the given moment in time
* @link https://www.php.net/manual/en/intltimezone.getoffset.php
* @param IntlTimeZone $obj
* @param float $date
* @param bool $local
* @param int $rawOffset
* @param int $dstOffset
* @return int
* @since 5.5
*/
function intltz_get_offset($obj, $date, $local, &$rawOffset, &$dstOffset) { }
/**
* Get the raw GMT offset (before taking daylight savings time into account
* @link https://www.php.net/manual/en/intltimezone.getrawoffset.php
* @param IntlTimeZone $obj
* @return int
*/
function intltz_get_raw_offset($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Get the timezone data version currently used by ICU
* @link https://www.php.net/manual/en/intltimezone.gettzdataversion.php
* @param IntlTimeZone $obj
* @return string
* @since 5.5
*/
function intltz_get_tz_data_version($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Check if this zone has the same rules and offset as another zone
* @link https://www.php.net/manual/en/intltimezone.hassamerules.php
* @param IntlTimeZone $obj
* @param IntlTimeZone $otherTimeZone
* @return bool
* @since 5.5
*/
function intltz_has_same_rules($obj, $otherTimeZone) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Convert to DateTimeZone object
* @link https://www.php.net/manual/ru/intltimezone.todatetimezone.php
* @param $obj
* @return DateTimeZone
* @since 5.5
*/
function intltz_to_date_time_zone($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* Check if this time zone uses daylight savings time
* @link https://www.php.net/manual/ru/intltimezone.usedaylighttime.php
* @param $obj
* @return bool
* @since 5.5
*/
function intltz_use_daylight_time($obj) { }
/**
* (PHP 5 &gt;=5.5.0 PECL intl &gt;= 3.0.0a1)<br/>
* @param mixed $timeZone
* @param string $locale
* @return IntlGregorianCalendar
* @since 5.5
*/
function intlgregcal_create_instance($timeZone = null, $locale = null) { }
/**
* @param IntlGregorianCalendar $obj
* @param double $change
*
*/
function intlgregcal_set_gregorian_change($obj, $change) { }
/**
* @param IntlGregorianCalendar $obj
* @return double $change
*/
function intlgregcal_get_gregorian_change($obj) { }
/**
* @param int $year
* @return bool
*/
function intlgregcal_is_leap_year($year) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Create a resource bundle
* @link https://php.net/manual/en/resourcebundle.create.php
* @param string $locale <p>
* Locale for which the resources should be loaded (locale name, e.g. en_CA).
* </p>
* @param string $bundlename <p>
* The directory where the data is stored or the name of the .dat file.
* </p>
* @param bool $fallback [optional] <p>
* Whether locale should match exactly or fallback to parent locale is allowed.
* </p>
* @return ResourceBundle|false <b>ResourceBundle</b> object or <b>FALSE</b> on error.
*/
function resourcebundle_create($locale, $bundlename, $fallback = null) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get data from the bundle
* @link https://php.net/manual/en/resourcebundle.get.php
* @param ResourceBundle $r
* @param string|int $index <p>
* Data index, must be string or integer.
* </p>
* @return mixed the data located at the index or <b>NULL</b> on error. Strings, integers and binary data strings
* are returned as corresponding PHP types, integer array is returned as PHP array. Complex types are
* returned as <b>ResourceBundle</b> object.
*/
function resourcebundle_get(ResourceBundle $r, $index) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get number of elements in the bundle
* @link https://php.net/manual/en/resourcebundle.count.php
* @param ResourceBundle $r
* @param $bundle
* @return int number of elements in the bundle.
*/
function resourcebundle_count(ResourceBundle $r, $bundle) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get supported locales
* @link https://php.net/manual/en/resourcebundle.locales.php
* @param string $bundlename <p>
* Path of ResourceBundle for which to get available locales, or
* empty string for default locales list.
* </p>
* @return array the list of locales supported by the bundle.
*/
function resourcebundle_locales($bundlename) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get bundle's last error code.
* @link https://php.net/manual/en/resourcebundle.geterrorcode.php
* @param $bundle
* @return int error code from last bundle object call.
*/
function resourcebundle_get_error_code(ResourceBundle $bundle) { }
/**
* (PHP &gt;= 5.3.2, PECL intl &gt;= 2.0.0)<br/>
* Get bundle's last error message.
* @link https://php.net/manual/en/resourcebundle.geterrormessage.php
* @param $bundle
* @return string error message from last bundle object's call.
*/
function resourcebundle_get_error_message(ResourceBundle $bundle) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create a transliterator
* @link https://php.net/manual/en/transliterator.create.php
* @param string $id <p>
* The id.
* </p>
* @param int $direction [optional] <p>
* The direction, defaults to
* >Transliterator::FORWARD.
* May also be set to
* Transliterator::REVERSE.
* </p>
* @return Transliterator|null a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure.
* @since 5.4
*/
function transliterator_create($id, $direction = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create transliterator from rules
* @link https://php.net/manual/en/transliterator.createfromrules.php
* @param string $rules <p>
* The rules.
* </p>
* @param string $direction [optional] <p>
* The direction, defaults to
* >Transliterator::FORWARD.
* May also be set to
* Transliterator::REVERSE.
* </p>
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure.
* @since 5.4
*/
function transliterator_create_from_rules($rules, $direction = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get transliterator IDs
* @link https://php.net/manual/en/transliterator.listids.php
* @return array An array of registered transliterator IDs on success,
* or <b>FALSE</b> on failure.
* @since 5.4
*/
function transliterator_list_ids() { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Create an inverse transliterator
* @link https://php.net/manual/en/transliterator.createinverse.php
* @param Transliterator $orig_trans
* @return Transliterator a <b>Transliterator</b> object on success,
* or <b>NULL</b> on failure
* @since 5.4
*/
function transliterator_create_inverse(Transliterator $orig_trans) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Transliterate a string
* @link https://php.net/manual/en/transliterator.transliterate.php
* @param Transliterator|string $transliterator
* @param string $subject <p>
* The string to be transformed.
* </p>
* @param int $start [optional] <p>
* The start index (in UTF-16 code units) from which the string will start
* to be transformed, inclusive. Indexing starts at 0. The text before will
* be left as is.
* </p>
* @param int $end [optional] <p>
* The end index (in UTF-16 code units) until which the string will be
* transformed, exclusive. Indexing starts at 0. The text after will be
* left as is.
* </p>
* @return string|false The transfomed string on success, or <b>FALSE</b> on failure.
* @since 5.4
*/
function transliterator_transliterate($transliterator, $subject, $start = null, $end = null) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get last error code
* @link https://php.net/manual/en/transliterator.geterrorcode.php
* @param Transliterator $trans
* @return int The error code on success,
* or <b>FALSE</b> if none exists, or on failure.
* @since 5.4
*/
function transliterator_get_error_code(Transliterator $trans) { }
/**
* (PHP &gt;= 5.4.0, PECL intl &gt;= 2.0.0)<br/>
* Get last error message
* @link https://php.net/manual/en/transliterator.geterrormessage.php
* @param Transliterator $trans
* @return string The error code on success,
* or <b>FALSE</b> if none exists, or on failure.
* @since 5.4
*/
function transliterator_get_error_message(Transliterator $trans) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get the last error code
* @link https://php.net/manual/en/function.intl-get-error-code.php
* @return int Error code returned by the last API function call.
*/
function intl_get_error_code() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get description of the last error
* @link https://php.net/manual/en/function.intl-get-error-message.php
* @return string Description of an error occurred in the last API function call.
*/
function intl_get_error_message() { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Check whether the given error code indicates failure
* @link https://php.net/manual/en/function.intl-is-failure.php
* @param int $error_code <p>
* is a value that returned by functions:
* <b>intl_get_error_code</b>,
* <b>collator_get_error_code</b> .
* </p>
* @return bool <b>TRUE</b> if it the code indicates some failure, and <b>FALSE</b>
* in case of success or a warning.
*/
function intl_is_failure($error_code) { }
/**
* (PHP 5 &gt;= 5.3.0, PECL intl &gt;= 1.0.0)<br/>
* Get symbolic name for a given error code
* @link https://php.net/manual/en/function.intl-error-name.php
* @param int $error_code <p>
* ICU error code.
* </p>
* @return string The returned string will be the same as the name of the error code
* constant.
*/
function intl_error_name($error_code) { }
/**
* Gets the Decomposition_Mapping property for the given UTF-8 encoded code point
*
* @link https://www.php.net/manual/en/normalizer.getrawdecomposition.php
*
* @param string $input
* @return string|null
*
* @since 7.3
*/
function normalizer_get_raw_decomposition($input) { }
/**
* @since 5.5
*/
function intltz_create_default() { }
/**
* @since 5.5
*/
function intltz_get_gmt() { }
/**
* @since 5.5
*/
function intltz_get_unknown() { }
/**
* @since 5.5
*/
function intltz_create_time_zone_id_enumeration($zoneType, $region = null, $rawOffset = null) { }
/**
* @since 5.5
*/
function intltz_get_region($zoneId) { }
/**
* Set minimal number of days the first week in a year or month can have
*
* @link https://www.php.net/manual/en/intlcalendar.setminimaldaysinfirstweek.php
*
* @param IntlCalendar $calendar
* @param int $numberOfDays
* @return bool
*
* @since 5.5.1
*/
function intlcal_set_minimal_days_in_first_week(IntlCalendar $calendar, $numberOfDays) { }
/**
* Limit on locale length, set to 80 in PHP code. Locale names longer
* than this limit will not be accepted.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('INTL_MAX_LOCALE_LEN', 80);
define ('INTL_ICU_VERSION', "4.8.1.1");
define ('INTL_ICU_DATA_VERSION', "4.8.1");
define ('ULOC_ACTUAL_LOCALE', 0);
define ('ULOC_VALID_LOCALE', 1);
define ('GRAPHEME_EXTR_COUNT', 0);
define ('GRAPHEME_EXTR_MAXBYTES', 1);
define ('GRAPHEME_EXTR_MAXCHARS', 2);
define ('U_USING_FALLBACK_WARNING', -128);
define ('U_ERROR_WARNING_START', -128);
define ('U_USING_DEFAULT_WARNING', -127);
define ('U_SAFECLONE_ALLOCATED_WARNING', -126);
define ('U_STATE_OLD_WARNING', -125);
define ('U_STRING_NOT_TERMINATED_WARNING', -124);
define ('U_SORT_KEY_TOO_SHORT_WARNING', -123);
define ('U_AMBIGUOUS_ALIAS_WARNING', -122);
define ('U_DIFFERENT_UCA_VERSION', -121);
define ('U_ERROR_WARNING_LIMIT', -119);
define ('U_ZERO_ERROR', 0);
define ('U_ILLEGAL_ARGUMENT_ERROR', 1);
define ('U_MISSING_RESOURCE_ERROR', 2);
define ('U_INVALID_FORMAT_ERROR', 3);
define ('U_FILE_ACCESS_ERROR', 4);
define ('U_INTERNAL_PROGRAM_ERROR', 5);
define ('U_MESSAGE_PARSE_ERROR', 6);
define ('U_MEMORY_ALLOCATION_ERROR', 7);
define ('U_INDEX_OUTOFBOUNDS_ERROR', 8);
define ('U_PARSE_ERROR', 9);
define ('U_INVALID_CHAR_FOUND', 10);
define ('U_TRUNCATED_CHAR_FOUND', 11);
define ('U_ILLEGAL_CHAR_FOUND', 12);
define ('U_INVALID_TABLE_FORMAT', 13);
define ('U_INVALID_TABLE_FILE', 14);
define ('U_BUFFER_OVERFLOW_ERROR', 15);
define ('U_UNSUPPORTED_ERROR', 16);
define ('U_RESOURCE_TYPE_MISMATCH', 17);
define ('U_ILLEGAL_ESCAPE_SEQUENCE', 18);
define ('U_UNSUPPORTED_ESCAPE_SEQUENCE', 19);
define ('U_NO_SPACE_AVAILABLE', 20);
define ('U_CE_NOT_FOUND_ERROR', 21);
define ('U_PRIMARY_TOO_LONG_ERROR', 22);
define ('U_STATE_TOO_OLD_ERROR', 23);
define ('U_TOO_MANY_ALIASES_ERROR', 24);
define ('U_ENUM_OUT_OF_SYNC_ERROR', 25);
define ('U_INVARIANT_CONVERSION_ERROR', 26);
define ('U_INVALID_STATE_ERROR', 27);
define ('U_COLLATOR_VERSION_MISMATCH', 28);
define ('U_USELESS_COLLATOR_ERROR', 29);
define ('U_NO_WRITE_PERMISSION', 30);
define ('U_STANDARD_ERROR_LIMIT', 31);
define ('U_BAD_VARIABLE_DEFINITION', 65536);
define ('U_PARSE_ERROR_START', 65536);
define ('U_MALFORMED_RULE', 65537);
define ('U_MALFORMED_SET', 65538);
define ('U_MALFORMED_SYMBOL_REFERENCE', 65539);
define ('U_MALFORMED_UNICODE_ESCAPE', 65540);
define ('U_MALFORMED_VARIABLE_DEFINITION', 65541);
define ('U_MALFORMED_VARIABLE_REFERENCE', 65542);
define ('U_MISMATCHED_SEGMENT_DELIMITERS', 65543);
define ('U_MISPLACED_ANCHOR_START', 65544);
define ('U_MISPLACED_CURSOR_OFFSET', 65545);
define ('U_MISPLACED_QUANTIFIER', 65546);
define ('U_MISSING_OPERATOR', 65547);
define ('U_MISSING_SEGMENT_CLOSE', 65548);
define ('U_MULTIPLE_ANTE_CONTEXTS', 65549);
define ('U_MULTIPLE_CURSORS', 65550);
define ('U_MULTIPLE_POST_CONTEXTS', 65551);
define ('U_TRAILING_BACKSLASH', 65552);
define ('U_UNDEFINED_SEGMENT_REFERENCE', 65553);
define ('U_UNDEFINED_VARIABLE', 65554);
define ('U_UNQUOTED_SPECIAL', 65555);
define ('U_UNTERMINATED_QUOTE', 65556);
define ('U_RULE_MASK_ERROR', 65557);
define ('U_MISPLACED_COMPOUND_FILTER', 65558);
define ('U_MULTIPLE_COMPOUND_FILTERS', 65559);
define ('U_INVALID_RBT_SYNTAX', 65560);
define ('U_INVALID_PROPERTY_PATTERN', 65561);
define ('U_MALFORMED_PRAGMA', 65562);
define ('U_UNCLOSED_SEGMENT', 65563);
define ('U_ILLEGAL_CHAR_IN_SEGMENT', 65564);
define ('U_VARIABLE_RANGE_EXHAUSTED', 65565);
define ('U_VARIABLE_RANGE_OVERLAP', 65566);
define ('U_ILLEGAL_CHARACTER', 65567);
define ('U_INTERNAL_TRANSLITERATOR_ERROR', 65568);
define ('U_INVALID_ID', 65569);
define ('U_INVALID_FUNCTION', 65570);
define ('U_PARSE_ERROR_LIMIT', 65571);
define ('U_UNEXPECTED_TOKEN', 65792);
define ('U_FMT_PARSE_ERROR_START', 65792);
define ('U_MULTIPLE_DECIMAL_SEPARATORS', 65793);
define ('U_MULTIPLE_DECIMAL_SEPERATORS', 65793);
define ('U_MULTIPLE_EXPONENTIAL_SYMBOLS', 65794);
define ('U_MALFORMED_EXPONENTIAL_PATTERN', 65795);
define ('U_MULTIPLE_PERCENT_SYMBOLS', 65796);
define ('U_MULTIPLE_PERMILL_SYMBOLS', 65797);
define ('U_MULTIPLE_PAD_SPECIFIERS', 65798);
define ('U_PATTERN_SYNTAX_ERROR', 65799);
define ('U_ILLEGAL_PAD_POSITION', 65800);
define ('U_UNMATCHED_BRACES', 65801);
define ('U_UNSUPPORTED_PROPERTY', 65802);
define ('U_UNSUPPORTED_ATTRIBUTE', 65803);
define ('U_FMT_PARSE_ERROR_LIMIT', 65810);
define ('U_BRK_INTERNAL_ERROR', 66048);
define ('U_BRK_ERROR_START', 66048);
define ('U_BRK_HEX_DIGITS_EXPECTED', 66049);
define ('U_BRK_SEMICOLON_EXPECTED', 66050);
define ('U_BRK_RULE_SYNTAX', 66051);
define ('U_BRK_UNCLOSED_SET', 66052);
define ('U_BRK_ASSIGN_ERROR', 66053);
define ('U_BRK_VARIABLE_REDFINITION', 66054);
define ('U_BRK_MISMATCHED_PAREN', 66055);
define ('U_BRK_NEW_LINE_IN_QUOTED_STRING', 66056);
define ('U_BRK_UNDEFINED_VARIABLE', 66057);
define ('U_BRK_INIT_ERROR', 66058);
define ('U_BRK_RULE_EMPTY_SET', 66059);
define ('U_BRK_UNRECOGNIZED_OPTION', 66060);
define ('U_BRK_MALFORMED_RULE_TAG', 66061);
define ('U_BRK_ERROR_LIMIT', 66062);
define ('U_REGEX_INTERNAL_ERROR', 66304);
define ('U_REGEX_ERROR_START', 66304);
define ('U_REGEX_RULE_SYNTAX', 66305);
define ('U_REGEX_INVALID_STATE', 66306);
define ('U_REGEX_BAD_ESCAPE_SEQUENCE', 66307);
define ('U_REGEX_PROPERTY_SYNTAX', 66308);
define ('U_REGEX_UNIMPLEMENTED', 66309);
define ('U_REGEX_MISMATCHED_PAREN', 66310);
define ('U_REGEX_NUMBER_TOO_BIG', 66311);
define ('U_REGEX_BAD_INTERVAL', 66312);
define ('U_REGEX_MAX_LT_MIN', 66313);
define ('U_REGEX_INVALID_BACK_REF', 66314);
define ('U_REGEX_INVALID_FLAG', 66315);
define ('U_REGEX_LOOK_BEHIND_LIMIT', 66316);
define ('U_REGEX_SET_CONTAINS_STRING', 66317);
define ('U_REGEX_ERROR_LIMIT', 66324);
define ('U_IDNA_PROHIBITED_ERROR', 66560);
define ('U_IDNA_ERROR_START', 66560);
define ('U_IDNA_UNASSIGNED_ERROR', 66561);
define ('U_IDNA_CHECK_BIDI_ERROR', 66562);
define ('U_IDNA_STD3_ASCII_RULES_ERROR', 66563);
define ('U_IDNA_ACE_PREFIX_ERROR', 66564);
define ('U_IDNA_VERIFICATION_ERROR', 66565);
define ('U_IDNA_LABEL_TOO_LONG_ERROR', 66566);
define ('U_IDNA_ZERO_LENGTH_LABEL_ERROR', 66567);
define ('U_IDNA_DOMAIN_NAME_TOO_LONG_ERROR', 66568);
define ('U_IDNA_ERROR_LIMIT', 66569);
define ('U_STRINGPREP_PROHIBITED_ERROR', 66560);
define ('U_STRINGPREP_UNASSIGNED_ERROR', 66561);
define ('U_STRINGPREP_CHECK_BIDI_ERROR', 66562);
define ('U_ERROR_LIMIT', 66818);
/**
* Prohibit processing of unassigned codepoints in the input for IDN
* functions and do not check if the input conforms to domain name ASCII rules.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_DEFAULT', 0);
/**
* Allow processing of unassigned codepoints in the input for IDN functions.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_ALLOW_UNASSIGNED', 1);
/**
* Check if the input for IDN functions conforms to domain name ASCII rules.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_USE_STD3_RULES', 2);
/**
* Check whether the input conforms to the BiDi rules.
* Ignored by the IDNA2003 implementation, which always performs this check.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_CHECK_BIDI', 4);
/**
* Check whether the input conforms to the CONTEXTJ rules.
* Ignored by the IDNA2003 implementation, as this check is new in IDNA2008.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_CHECK_CONTEXTJ', 8);
/**
* Option for nontransitional processing in
* <b>idn_to_ascii</b>. Transitional processing is activated
* by default. This option is ignored by the IDNA2003 implementation.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_NONTRANSITIONAL_TO_ASCII', 16);
/**
* Option for nontransitional processing in
* <b>idn_to_utf8</b>. Transitional processing is activated
* by default. This option is ignored by the IDNA2003 implementation.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_NONTRANSITIONAL_TO_UNICODE', 32);
/**
* Use IDNA 2003 algorithm in {@see idn_to_utf8} and
* {@see idn_to_ascii}. This is the default.
* @link https://php.net/manual/en/intl.constants.php
* @deprecated 7.2 Use {@see INTL_IDNA_VARIANT_UTS46} instead.
* @removed 8.0
*/
define ('INTL_IDNA_VARIANT_2003', 0);
/**
* Use UTS #46 algorithm in <b>idn_to_utf8</b> and
* <b>idn_to_ascii</b>.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('INTL_IDNA_VARIANT_UTS46', 1);
/**
* Errors reported in a bitset returned by the UTS #46 algorithm in
* <b>idn_to_utf8</b> and
* <b>idn_to_ascii</b>.
* @link https://php.net/manual/en/intl.constants.php
*/
define ('IDNA_ERROR_EMPTY_LABEL', 1);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_LABEL_TOO_LONG', 2);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_DOMAIN_NAME_TOO_LONG', 4);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_LEADING_HYPHEN', 8);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_TRAILING_HYPHEN', 16);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_HYPHEN_3_4', 32);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_LEADING_COMBINING_MARK', 64);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_DISALLOWED', 128);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_PUNYCODE', 256);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_LABEL_HAS_DOT', 512);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_INVALID_ACE_LABEL', 1024);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_BIDI', 2048);
/**
* @link https://www.php.net/manual/en/migration54.global-constants.php
* @since 5.4
*/
define ('IDNA_ERROR_CONTEXTJ', 4096);
/**
* @since 5.5
*/
class IntlBreakIterator implements IteratorAggregate
{
/* Constants */
const DONE = -1;
const WORD_NONE = 0;
const WORD_NONE_LIMIT = 100;
const WORD_NUMBER = 100;
const WORD_NUMBER_LIMIT = 200;
const WORD_LETTER = 200;
const WORD_LETTER_LIMIT = 300;
const WORD_KANA = 300;
const WORD_KANA_LIMIT = 400;
const WORD_IDEO = 400;
const WORD_IDEO_LIMIT = 500;
const LINE_SOFT = 0;
const LINE_SOFT_LIMIT = 100;
const LINE_HARD = 100;
const LINE_HARD_LIMIT = 200;
const SENTENCE_TERM = 0;
const SENTENCE_TERM_LIMIT = 100;
const SENTENCE_SEP = 100;
const SENTENCE_SEP_LIMIT = 200;
/* Methods */
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Private constructor for disallowing instantiation
*/
private function __construct() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for boundaries of combining character sequences
* @link https://www.php.net/manual/en/intlbreakiterator.createcharacterinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createCharacterInstance($locale = null) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for boundaries of code points
* @link https://www.php.net/manual/en/intlbreakiterator.createcodepointinstance.php
* @return IntlBreakIterator
*/
public static function createCodePointInstance() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for logically possible line breaks
* @link https://www.php.net/manual/en/intlbreakiterator.createlineinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createLineInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for sentence breaks
* @link https://www.php.net/manual/en/intlbreakiterator.createsentenceinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createSentenceInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for title-casing breaks
* @link https://www.php.net/manual/en/intlbreakiterator.createtitleinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createTitleInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for word breaks
* @link https://www.php.net/manual/en/intlbreakiterator.createwordinstance.php
* @param string $locale
* @return IntlBreakIterator
*/
public static function createWordInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get index of current position
* @link https://www.php.net/manual/en/intlbreakiterator.current.php
* @return int
*/
public function current() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set position to the first character in the text
* @link https://www.php.net/manual/en/intlbreakiterator.first.php
*/
public function first() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Advance the iterator to the first boundary following specified offset
* @link https://www.php.net/manual/en/intlbreakiterator.following.php
* @param int $offset
*/
public function following($offset) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last error code on the object
* @link https://www.php.net/manual/en/intlbreakiterator.geterrorcode.php
* @return int
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last error message on the object
* @link https://www.php.net/manual/en/intlbreakiterator.geterrormessage.php
* @return string
*/
public function getErrorMessage() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the locale associated with the object
* @link https://www.php.net/manual/en/intlbreakiterator.getlocale.php
* @param string $locale_type
*/
public function getLocale($locale_type) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create iterator for navigating fragments between boundaries
* @link https://www.php.net/manual/en/intlbreakiterator.getpartsiterator.php
* @param string $key_type [optional]
*/
public function getPartsIterator($key_type = IntlPartsIterator::KEY_SEQUENTIAL) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the text being scanned
* @link https://www.php.net/manual/en/intlbreakiterator.gettext.php
*/
public function getText() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Tell whether an offset is a boundary's offset
* @link https://www.php.net/manual/en/intlbreakiterator.isboundary.php
* @param string $offset
*/
public function isBoundary($offset) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the iterator position to index beyond the last character
* @link https://www.php.net/manual/en/intlbreakiterator.last.php
* @return int
*/
public function last() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://www.php.net/manual/en/intlbreakiterator.next.php
* @param string $offset [optional]
* @return int
*/
public function next($offset = null) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://www.php.net/manual/en/intlbreakiterator.preceding.php
* @param int $offset
*/
public function preceding($offset) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the iterator position to the boundary immediately before the current
* @link https://www.php.net/manual/en/intlbreakiterator.previous.php
* @return int
*/
public function previous() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the text being scanned
* @link https://www.php.net/manual/en/intlbreakiterator.settext.php
* @param string $text
*/
public function setText($text) { }
public function getIterator(){}
}
class IntlRuleBasedBreakIterator extends IntlBreakIterator implements Traversable {
/* Methods */
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://www.php.net/manual/en/intlbreakiterator.construct.php
* @param string $rules
* @param string $areCompiled [optional]
*/
public function __construct($rules, $areCompiled) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for boundaries of combining character sequences
* @link https://www.php.net/manual/en/intlbreakiterator.createcharacterinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createCharacterInstance($locale) { }
/*
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for boundaries of code points
* @link https://www.php.net/manual/en/intlbreakiterator.createcodepointinstance.php
* @return IntlRuleBasedBreakIterator
*/
public static function createCodePointInstance() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for logically possible line breaks
* @link https://www.php.net/manual/en/intlbreakiterator.createlineinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createLineInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for sentence breaks
* @link https://www.php.net/manual/en/intlbreakiterator.createsentenceinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createSentenceInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for title-casing breaks
* @link https://www.php.net/manual/en/intlbreakiterator.createtitleinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createTitleInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create break iterator for word breaks
* @link https://www.php.net/manual/en/intlbreakiterator.createwordinstance.php
* @param string $locale
* @return IntlRuleBasedBreakIterator
*/
public static function createWordInstance($locale) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://www.php.net/manual/en/intlrulebasedbreakiterator.getbinaryrules.php
* Get the binary form of compiled rules
* @return string
*/
public function getBinaryRules() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://www.php.net/manual/en/intlrulebasedbreakiterator.getrules.php
* Get the rule set used to create this object
* @return string
*/
public function getRules() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://www.php.net/manual/en/intlrulebasedbreakiterator.getrulesstatus.php
* Get the largest status value from the break rules that determined the current break position
* @return int
*/
public function getRuleStatus() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* @link https://www.php.net/manual/en/intlrulebasedbreakiterator.getrulestatusvec.php
* Get the status values from the break rules that determined the current break position
* @return array
*/
public function getRuleStatusVec() { }
}
/**
* @link https://www.php.net/manual/en/class.intlpartsiterator.php
* @since 5.5
*/
class IntlPartsIterator extends IntlIterator implements Iterator {
const KEY_SEQUENTIAL = 0 ;
const KEY_LEFT = 1 ;
const KEY_RIGHT = 2 ;
/**
* @return IntlBreakIterator
*/
public function getBreakIterator() { }
}
class IntlCodePointBreakIterator extends IntlBreakIterator implements Traversable {
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last code point passed over after advancing or receding the iterator
* @link https://www.php.net/manual/en/intlcodepointbreakiterator.getlastcodepoint.php
* @return int
*/
public function getLastCodePoint() { }
}
class UConverter {
/* Constants */
const REASON_UNASSIGNED = 0;
const REASON_ILLEGAL = 1;
const REASON_IRREGULAR = 2;
const REASON_RESET = 3;
const REASON_CLOSE = 4;
const REASON_CLONE = 5;
const UNSUPPORTED_CONVERTER = -1;
const SBCS = 0;
const DBCS = 1;
const MBCS = 2;
const LATIN_1 = 3;
const UTF8 = 4;
const UTF16_BigEndian = 5;
const UTF16_LittleEndian = 6;
const UTF32_BigEndian = 7;
const UTF32_LittleEndian = 8;
const EBCDIC_STATEFUL = 9;
const ISO_2022 = 10;
const LMBCS_1 = 11;
const LMBCS_2 = 12;
const LMBCS_3 = 13;
const LMBCS_4 = 14;
const LMBCS_5 = 15;
const LMBCS_6 = 16;
const LMBCS_8 = 17;
const LMBCS_11 = 18;
const LMBCS_16 = 19;
const LMBCS_17 = 20;
const LMBCS_18 = 21;
const LMBCS_19 = 22;
const LMBCS_LAST = 22;
const HZ = 23;
const SCSU = 24;
const ISCII = 25;
const US_ASCII = 26;
const UTF7 = 27;
const BOCU1 = 28;
const UTF16 = 29;
const UTF32 = 30;
const CESU8 = 31;
const IMAP_MAILBOX = 32;
/* Methods */
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Create UConverter object
* @link https://php.net/manual/en/uconverter.construct.php
* @param string $destination_encoding
* @param string $source_encoding
*/
public function __construct($destination_encoding = null, $source_encoding = null) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Convert string from one charset to anothe
* @link https://php.net/manual/en/uconverter.convert.php
* @param string $str
* @param bool $reverse
* @return string
*/
public function convert($str, $reverse) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Default "from" callback function
* @link https://php.net/manual/en/uconverter.fromucallback.php
* @param int $reason
* @param string $source
* @param string $codePoint
* @param int $error
* @return mixed
*/
public function fromUCallback($reason, $source, $codePoint, &$error) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the aliases of the given name
* @link https://php.net/manual/en/uconverter.getaliases.php
* @param string $name
* @return array
*/
public static function getAliases($name = null) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the available canonical converter names
* @link https://php.net/manual/en/uconverter.getavailable.php
* @return array
*/
public static function getAvailable() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the destination encoding
* @link https://php.net/manual/en/uconverter.getdestinationencoding.php
* @return string
*/
public function getDestinationEncoding() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the destination converter type
* @link https://php.net/manual/en/uconverter.getdestinationtype.php
* @return int
*/
public function getDestinationType() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last error code on the object
* @link https://php.net/manual/en/uconverter.geterrorcode.php
* @return int
*/
public function getErrorCode() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get last error message on the object
* @link https://php.net/manual/en/uconverter.geterrormessage.php
* @return string
*/
public function getErrorMessage() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the source encoding
* @link https://php.net/manual/en/uconverter.getsourceencoding.php
* @return string
*/
public function getSourceEncoding() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get the source convertor type
* @link https://php.net/manual/en/uconverter.getsourcetype.php
* @return int
*/
public function getSourceType() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get standards associated to converter names
* @link https://php.net/manual/en/uconverter.getstandards.php
* @return array
*/
public static function getStandards() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get substitution chars
* @link https://php.net/manual/en/uconverter.getsubstchars.php
* @return string
*/
public function getSubstChars() { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Get string representation of the callback reason
* @link https://php.net/manual/en/uconverter.reasontext.php
* @param int $reason
* @return string
*/
public static function reasonText($reason) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the destination encoding
* @link https://php.net/manual/en/uconverter.setdestinationencoding.php
* @param string $encoding
* @return void
*/
public function setDestinationEncoding($encoding) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the source encoding
* @link https://php.net/manual/en/uconverter.setsourceencoding.php
* @param string $encoding
* @return void
*/
public function setSourceEncoding($encoding) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Set the substitution chars
* @link https://php.net/manual/en/uconverter.setsubstchars.php
* @param string $chars
* @return void
*/
public function setSubstChars($chars) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Default "to" callback function
* @link https://php.net/manual/en/uconverter.toucallback.php
* @param int $reason
* @param string $source
* @param string $codeUnits
* @param int $error
* @return mixed
*/
public function toUCallback($reason, $source, $codeUnits, &$error) { }
/**
* (PHP 5 &gt;=5.5.0)<br/>
* Convert string from one charset to another
* @link https://php.net/manual/en/uconverter.transcode.php
* @param string $str
* @param string $toEncoding
* @param string $fromEncoding
* @param array $options
* @return string
*/
public static function transcode($str, $toEncoding, $fromEncoding, array $options = []) { }
}
// End of intl v.1.1.0
?>