nextcloud/settings/l10n/zh_CN.json

333 lines
24 KiB
JSON
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

{ "translations": {
"{actor} changed your password" : "{actor} 已更改您的密码",
"You changed your password" : "您已更改您的密码",
"Your password was reset by an administrator" : "您的密码已被管理员重置",
"{actor} changed your email address" : "{actor} 已更改您的电子邮件地址",
"You changed your email address" : "您已更改您的电子邮件地址",
"Your email address was changed by an administrator" : "您的电子邮件地址已被管理员更改",
"Security" : "安全",
"You successfully logged in using two-factor authentication (%1$s)" : "您使用两步验证登录成功(%1$s",
"A login attempt using two-factor authentication failed (%1$s)" : "使用两步验证登录失败的尝试 (%1$s)",
"Your <strong>password</strong> or <strong>email</strong> was modified" : "您的 <strong>密码</strong> 或 <strong>邮箱</strong> 已被更改",
"Couldn't remove app." : "无法删除应用。",
"Couldn't update app." : "无法更新应用。",
"Wrong password" : "密码错误",
"Saved" : "已保存",
"No user supplied" : "没有满足的用户",
"Unable to change password" : "无法修改密码",
"Authentication error" : "认证错误",
"Please provide an admin recovery password; otherwise, all user data will be lost." : "请提供管理员恢复密码,否则所有用户的数据都将丢失。",
"Wrong admin recovery password. Please check the password and try again." : "错误的管理员恢复密码。请检查密码并重试。",
"Backend doesn't support password change, but the user's encryption key was updated." : "后端不支持密码更改,但用户的加密密钥已更新。",
"installing and updating apps via the app store or Federated Cloud Sharing" : "通过应用程序商店或联合云共享安装和更新应用程序",
"Federated Cloud Sharing" : "联合云共享",
"Invalid SMTP password." : "无效的 SMTP 密码",
"Email setting test" : "电子邮件设置测试",
"Well done, %s!" : "已完成,%s",
"If you received this email, the email configuration seems to be correct." : "如果您收到了这封邮件,电子邮件配置应该就是正确的。",
"Email could not be sent. Check your mail server log" : "邮件无法发送。检查您的邮件服务器日志",
"A problem occurred while sending the email. Please revise your settings. (Error: %s)" : "在发送电子邮件时出现问题。请修正您的设置。(错误:%s",
"You need to set your user email before being able to send test emails." : "在发送测试邮件前您需要设置您的电子邮件地址。",
"Invalid mail address" : "无效的电子邮件地址",
"Settings saved" : "设置已保存",
"Unable to change full name" : "无法修改全名",
"Unable to change email address" : "无法修改电子邮箱地址",
"In order to verify your Twitter account, post the following tweet on Twitter (please make sure to post it without any line breaks):" : "为了验证您的 Twitter 帐户,请在 Twitter 上发布以下推文(请确保发布没有任何换行符):",
"In order to verify your Website, store the following content in your web-root at '.well-known/CloudIdVerificationCode.txt' (please make sure that the complete text is in one line):" : "为了验证您的网站,请将以下内容存储在“.well-known / CloudIdVerificationCode.txt”的网络根目录中请确保完整的文本在一行中",
"%1$s changed your password on %2$s." : "%1$s 更改了您在 %2$s 上的密码。",
"Your password on %s was changed." : "您在 %s 上的密码已被更改。",
"Your password on %s was reset by an administrator." : "您在 %s 上的密码已被管理员重置。",
"Password for %1$s changed on %2$s" : "%2$s %1$s 的密码已更改",
"Password changed for %s" : "%s 的密码已更改",
"If you did not request this, please contact an administrator." : "如果这不是您发起的请求,请联系管理员。",
"Your email address on %s was changed." : "您在 %s 上的电子邮件地址已更改。",
"Your email address on %s was changed by an administrator." : "您在 %s 上的电子邮件地址已被管理员修改",
"Email address for %1$s changed on %2$s" : "%2$s 上 %1$s 的电子邮件地址已更改",
"Email address changed for %s" : "%s 的电子邮件地址已更改",
"The new email address is %s" : "新的电子邮件地址是%s",
"Your %s account was created" : "您的 %s 帐户已创建",
"Welcome aboard" : "欢迎使用",
"Welcome aboard %s" : "%s欢迎使用",
"Welcome to your %s account, you can add, protect, and share your data." : "欢迎使用您的 %s 帐户,您可以添加、保护和共享您的数据。",
"Your username is: %s" : "您的用户名是:%s",
"Set your password" : "设置您的密码",
"Go to %s" : "访问 %s",
"Install Client" : "安装客户端",
"Migration in progress. Please wait until the migration is finished" : "正在进行迁移。请稍等,直到迁移完成",
"Migration started …" : "迁移开始...",
"Not saved" : "未保存",
"Sending…" : "正在发送…",
"Email sent" : "邮件已发送",
"An error occurred. Please upload an ASCII-encoded PEM certificate." : "发生错误。请上传 ASCII 编码的 PEM 证书。",
"Valid until {date}" : "有效期至 {date}",
"Delete" : "删除",
"Local" : "本地",
"Private" : "私有",
"Only visible to local users" : "仅对本地用户可见",
"Only visible to you" : "仅您自己可见",
"Contacts" : "联系人",
"Visible to local users and to trusted servers" : "仅对本地用户和信任的服务器可见",
"Public" : "公开",
"Will be synced to a global and public address book" : "将同步到全局和公开地址簿中",
"Verify" : "验证",
"Verifying …" : "正在验证...",
"Very weak password" : "非常弱的密码",
"Weak password" : "弱密码",
"So-so password" : "一般强度的密码",
"Good password" : "较强的密码",
"Strong password" : "强密码",
"An error occurred while changing your language. Please reload the page and try again." : "修改您的语言时遇到错误。请重新载入页面后再试。",
"An error occurred while changing your locale. Please reload the page and try again." : "修改您的地区时遇到错误。请重新载入页面后再试。",
"Select a profile picture" : "选择头像",
"Week starts on {fdow}" : "周开始于 {fdow}",
"Groups" : "分组",
"Group list is empty" : "群组列表为空",
"Two-factor authentication can be enforced for all\tusers and specific groups. If they do not have a two-factor provider configured, they will be unable to log into the system." : "两步验证可以对于所有用户和特定组启用。如果没有设置两步验证方式提供者,他们则不能登录到系统。",
"Enforce two-factor authentication" : "强制启用两步验证",
"Limit to groups" : "限制于组",
"Enforcement of two-factor authentication can be set for certain groups only." : "可以仅为某些组设置双因素身份验证的强制执行。",
"Enforced groups" : "强制群组",
"Excluded groups" : "排除群组",
"Save changes" : "保存修改",
"Device settings" : "设备设置",
"Internet Explorer" : "IE 浏览器",
"Edge" : "Edge 浏览器",
"Firefox" : "火狐浏览器",
"Google Chrome" : "谷歌浏览器",
"Safari" : "Safari 浏览器",
"Google Chrome for Android" : "安卓版谷歌浏览器",
"iPhone" : "iPhone",
"iPad" : "iPad",
"Nextcloud iOS app" : "Nextcloud iOS 应用",
"Nextcloud Android app" : "Nextcloud Android 应用",
"Nextcloud Talk for iOS" : "Nextcloud Talk for iOS",
"Nextcloud Talk for Android" : "Nextcloud Talk for Android",
"Allow filesystem access" : "允许访问文件系统",
"Revoke" : "撤销",
"Sync client - {os}" : "同步客户端 - {os}",
"This session" : "当前会话",
"Device" : "设备",
"Last activity" : "最后活跃",
"Devices & sessions" : "设备和活动链接",
"Web, desktop and mobile clients currently logged in to your account." : "您账号当前登录的 Web 页面,桌面和移动客户端。",
"Error while creating device token" : "创建设备令牌时出错",
"Error while deleting the token" : "删除令牌时出错",
"App name" : "应用名",
"Create new app password" : "创建新应用密码",
"Use the credentials below to configure your app or device." : "使用下述凭据配置您的应用或设备。",
"For security reasons this password will only be shown once." : "由于安全原因,密码仅会显示一次。",
"Username" : "用户名",
"Password" : "密码",
"Done" : "完成",
"Copied!" : "已复制!",
"Copy" : "复制",
"Official apps are developed by and within the community. They offer central functionality and are ready for production use." : "官方应用由社区和内部开发。其可以提供核心功能并保证生产用途。",
"Official" : "官方",
"Update to {version}" : "更新至 {version}",
"Remove" : "移除",
"Disable" : "禁用",
"All" : "全部",
"No results" : "没有结果",
"View in store" : "在商店中查看",
"Visit website" : "访问网站",
"Report a bug" : "报告问题",
"User documentation" : "用户文档",
"Admin documentation" : "管理员文档",
"Developer documentation" : "开发者文档",
"This app has no minimum Nextcloud version assigned. This will be an error in the future." : "该应用没有指定支持的 Nextcloud 最低版本。可能会在将来出现问题。",
"This app has no maximum Nextcloud version assigned. This will be an error in the future." : "该应用没有指定支持的 Nextcloud 最高版本。可能会在将来出现问题。",
"This app cannot be installed because the following dependencies are not fulfilled:" : "无法安装应用,因为无法满足下列依赖:",
"Update to {update}" : "更新至 {update}",
"No apps found for your version" : "未找到适合当前版本的应用",
"Disable all" : "禁用全部",
"Enable all" : "启用所有",
"Download and enable" : "下载并启用",
"Enable" : "启用",
"The app will be downloaded from the app store" : "该应用将从应用商店下载",
"You do not have permissions to see the details of this user" : "您没有权限查看该用户的详细信息",
"New password" : "新密码",
"Add user in group" : "向群组中添加用户",
"Select user quota" : "选择用户容量限额",
"Never" : "从不",
"Delete user" : "删除用户",
"Disable user" : "禁用用户",
"Enable user" : "启用用户",
"Resend welcome email" : "重新发送欢迎邮件",
"{size} used" : "{size} 已使用",
"Welcome mail sent!" : "欢迎邮件已经发送!",
"Display name" : "显示名称",
"Email" : "电子邮件",
"Group admin for" : "分组管理员",
"Quota" : "配额",
"Language" : "语言",
"Storage location" : "存储位置",
"User backend" : "用户来源",
"Last login" : "最后登录",
"Default language" : "默认语言",
"Add a new user" : "添加新用户",
"No users in here" : "这里没有用户",
"Unlimited" : "无限",
"Default quota" : "默认配额",
"Common languages" : "常用语言",
"All languages" : "所有语言",
"Your apps" : "您的应用",
"Active apps" : "已启用的应用",
"Disabled apps" : "已禁用的应用",
"Updates" : "更新",
"App bundles" : "应用软件包",
"New user" : "新建用户",
"Default quota:" : "默认配额:",
"Select default quota" : "选择默认存储限额",
"Show Languages" : "显示语言",
"Show last login" : "显示最后登录",
"Show user backend" : "显示用户来源",
"Show storage path" : "显示存储路径",
"You are about to remove the group {group}. The users will NOT be deleted." : "您正在删除 {group} 组。组中的用户将不会被删除。",
"Remove group" : "删除分组",
"Admins" : "管理员",
"Disabled users" : "已禁用的用户",
"Everyone" : "所有人",
"Add group" : "添加分组",
"An error occured during the request. Unable to proceed." : "请求期间发生错误。 无法继续。",
"The app has been enabled but needs to be updated. You will be redirected to the update page in 5 seconds." : "该应用已启用但是需要更新。5秒后将跳转到更新页面。",
"App update" : "更新应用",
"Error: This app can not be enabled because it makes the server unstable" : "错误:无法启用应用因为它会导致服务器不稳定",
"SSL Root Certificates" : "SSL 根证书",
"Common Name" : "通用名称",
"Valid until" : "有效期至",
"Issued By" : "授权由",
"Valid until %s" : "有效期至 %s",
"Import root certificate" : "导入根证书",
"Administrator documentation" : "管理员文档",
"Documentation" : "文档",
"Forum" : "论坛",
"None" : "无",
"Login" : "登录",
"Plain" : "明文",
"NT LAN Manager" : "NT LAN 管理器",
"SSL/TLS" : "SSL/TLS",
"STARTTLS" : "STARTTLS",
"Email server" : "电子邮件服务器",
"Open documentation" : "打开文档",
"It is important to set up this server to be able to send emails, like for password reset and notifications." : "设置此服务器以能够发送电子邮件(例如密码重置和通知)非常重要。",
"Send mode" : "发送模式",
"Encryption" : "加密",
"Sendmail mode" : "邮件发送模式",
"From address" : "来自地址",
"mail" : "邮件",
"Authentication method" : "认证方法",
"Authentication required" : "需要认证",
"Server address" : "服务器地址",
"Port" : "端口",
"Credentials" : "凭证",
"SMTP Username" : "SMTP 用户名",
"SMTP Password" : "SMTP 密码",
"Store credentials" : "存储凭据",
"Test email settings" : "测试电子邮件设置",
"Send email" : "发送邮件",
"Security & setup warnings" : "安全及设置警告",
"It's important for the security and performance of your instance that everything is configured correctly. To help you with that we are doing some automatic checks. Please see the linked documentation for more information." : "您的每项配置对于实例的安全性和性能都至关重要。 为了帮助您,我们正在做一些自动检查。 有关详细信息,请参阅文档链接。",
"All checks passed." : "所有检查已通过。",
"There are some errors regarding your setup." : "关于您的设置有一些错误。",
"There are some warnings regarding your setup." : "关于您的设置有一些警告。",
"Checking for system and security issues." : "正在检查系统和安全问题。",
"Check the security of your Nextcloud over <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"%s\">our security scan ↗</a>." : "通过<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"%s\">我们的安全检查 ↗</a>检查您 Nextcloud 的安全",
"Version" : "版本",
"Two-Factor Authentication" : "两步验证",
"Server-side encryption" : "服务器端加密",
"Server-side encryption makes it possible to encrypt files which are uploaded to this server. This comes with limitations like a performance penalty, so enable this only if needed." : "服务器端加密可以加密上传到此服务器的文件。这带来了诸如性能损失的限制,因此仅在需要时启用此功能。",
"Enable server-side encryption" : "启用服务器端加密",
"Please read carefully before activating server-side encryption: " : "在激活服务器端加密之前,请仔细阅读:",
"Once encryption is enabled, all files uploaded to the server from that point forward will be encrypted at rest on the server. It will only be possible to disable encryption at a later date if the active encryption module supports that function, and all pre-conditions (e.g. setting a recover key) are met." : "一旦加密被启用,之后上传到服务器的所有文件都将服务器上加密。只有当启用状态的加密模块支持解密并且所有前提都满足时(例如:设定恢复密钥)才能解除加密。",
"Encryption alone does not guarantee security of the system. Please see documentation for more information about how the encryption app works, and the supported use cases." : "单独的加密不能保证系统的安全性。请参考加密应用工作原理和支持的用例的文档获取更多信息。",
"Be aware that encryption always increases the file size." : "请注意,加密会增加文件大小。",
"It is always good to create regular backups of your data, in case of encryption make sure to backup the encryption keys along with your data." : "定期备份数据有助于保证数据完整,并且确保备份您的加密数据和加密密钥。",
"This is the final warning: Do you really want to enable encryption?" : "这是最后一次警告:您确定要启用加密?",
"Enable encryption" : "启用加密",
"No encryption module loaded, please enable an encryption module in the app menu." : "没有加载加密模块,请在 APP 应用菜单中启用加密模块。",
"Select default encryption module:" : "选择默认的加密模块:",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one. Please enable the \"Default encryption module\" and run 'occ encryption:migrate'" : "您需要从旧版本ownCloud <= 8.0)迁移您的加密密钥。请在应用中启用 \\\"Default encryption module\\\" 并运行 'occ encryption:migrate'",
"You need to migrate your encryption keys from the old encryption (ownCloud <= 8.0) to the new one." : "您需要从旧版本ownCloud<=8.0)迁移您的加密密钥。",
"Start migration" : "开始迁移",
"Background jobs" : "后台任务",
"Last job ran %s." : "上次定时任务执行于:%s。",
"Last job execution ran %s. Something seems wrong." : "上次定时任务执行于:%s。但存在一些问题。",
"Background job didnt run yet!" : "后台任务当前没有运行!",
"For optimal performance it's important to configure background jobs correctly. For bigger instances 'Cron' is the recommended setting. Please see the documentation for more information." : "为了优化性能,正确配置后台任务非常重要。对于较大的实例,推荐配置为 'Cron'。详情请参考相关文档。",
"Execute one task with each page loaded" : "每个页面加载后执行一个任务",
"cron.php is registered at a webcron service to call cron.php every 15 minutes over HTTP." : "cron.php 注册到 webcron 服务上,通过 http 每 15 分钟执行 cron.php。",
"Use system cron service to call the cron.php file every 15 minutes." : "使用系统定时任务服务每 15 分钟执行一次 cron.php 文件。",
"The cron.php needs to be executed by the system user \"%s\"." : "cron.php 需要被系统用户 \"%s\" 执行。",
"To run this you need the PHP POSIX extension. See {linkstart}PHP documentation{linkend} for more details." : "为了运行该功能,您需要 PHP posix 扩展。请参考 {linkstart}PHP 文档{linkend} 获取更多信息。",
"Sharing" : "共享",
"As admin you can fine-tune the sharing behavior. Please see the documentation for more information." : "作为管理员,您可以调整共享行为。 有关详细信息,请参阅文档。",
"Allow apps to use the Share API" : "允许应用使用共享 API",
"Allow users to share via link" : "允许用户通过链接共享文件",
"Allow public uploads" : "允许公开上传",
"Always ask for a password" : "一直要求输入密码",
"Enforce password protection" : "强制密码保护",
"Set default expiration date" : "设置默认过期日期",
"Expire after " : "过期于",
"days" : "天",
"Enforce expiration date" : "强制过期日期",
"Allow resharing" : "允许二次共享",
"Allow sharing with groups" : "允许群组共享",
"Restrict users to only share with users in their groups" : "限制仅与组内用户共享",
"Exclude groups from sharing" : "在共享中排除组",
"These groups will still be able to receive shares, but not to initiate them." : "这些组将仍可以获取共享,但无法向他人共享。",
"Allow username autocompletion in share dialog. If this is disabled the full username or email address needs to be entered." : "在共享对话框中允许用户名自动完成。 如果被禁用,则需要输入完整的用户名或电子邮件地址。",
"Show disclaimer text on the public link upload page. (Only shown when the file list is hidden.)" : "在公开链接上传页中显示免责声明。(仅当文件列表隐藏时显示。)",
"This text will be shown on the public link upload page when the file list is hidden." : "这些内容将在公开链接上传页中当文件列表隐藏时显示。",
"Default share permissions" : "默认共享权限",
"Personal" : "个人",
"Administration" : "管理",
"Developed by the {communityopen}Nextcloud community{linkclose}, the {githubopen}source code{linkclose} is licensed under the {licenseopen}AGPL{linkclose}." : "由 {communityopen}Nextcloud community{linkclose} 开发,{githubopen}源代码{linkclose} 基于 {licenseopen}AGPL{linkclose} 许可协议。",
"Like our Facebook page" : "点赞我们 facebook 页面!",
"Follow us on Twitter" : "在 Twitter 上关注我们!",
"Check out our blog" : "浏览我们的博客!",
"Subscribe to our newsletter" : "订阅我们的最新消息!",
"Profile picture" : "账户头像",
"Upload new" : "上传",
"Select from Files" : "选择文件",
"Remove image" : "删除图片",
"png or jpg, max. 20 MB" : "png 或 jpg 格式,最大 20MB",
"Picture provided by original account" : "原始账户图片",
"Cancel" : "取消",
"Choose as profile picture" : "选择个人头像",
"Details" : "详情",
"You are a member of the following groups:" : "您是以下群组的成员:",
"You are using <strong>%s</strong>" : "您正在使用<strong>%s</strong>",
"Full name" : "全名",
"No display name set" : "不显示名称设置",
"Your email address" : "您的电子邮件",
"No email address set" : "尚未设置 Email 地址",
"For password reset and notifications" : "用于密码重置和通知",
"Phone number" : "电话号码",
"Your phone number" : "您的电话号码",
"Address" : "地址",
"Your postal address" : "您的邮寄地址",
"Website" : "网站",
"It can take up to 24 hours before the account is displayed as verified." : "在帐户显示为验证之前最多可能需要24小时。",
"Link https://…" : "链接 https://…",
"Twitter" : "Twitter",
"Twitter handle @…" : "推特用户名@…",
"Help translate" : "帮助翻译",
"Locale" : "本地",
"Current password" : "当前密码",
"Change password" : "修改密码",
"cURL is using an outdated %s version (%s). Please update your operating system or features such as %s will not work reliably." : "cURL 当前使用的过时的 %s 版本(%s。请更新您的操作系统或组件例如 %s 将无法可靠地工作。",
"Disconnect" : "断开连接",
"iPhone iOS" : "iPhone iOS",
"iPad iOS" : "iPad iOS",
"iOS Client" : "iOS 客户端",
"Android Client" : "Android 客户端",
"Not supported!" : "不支持!",
"Press ⌘-C to copy." : "按 ⌘-C 键复制。",
"Press Ctrl-C to copy." : "按 Ctrl-C 复制。",
"Error while loading browser sessions and device tokens" : "加载浏览器会话和设备令牌时出错",
"Default quota :" : "默认限额:",
"Please double check the <a target=\"_blank\" rel=\"noreferrer noopener\" href=\"%s\">installation guides ↗</a>, and check for any errors or warnings in the <a href=\"%s\">log</a>." : "请仔细检查<a target=\"_blank\" rel=\"noreferrer noopener\" href=\"%s\">安装指南</a>,并检查<a href=\"%s\">日志</a>中是否有错误或警告。",
"Follow us on Google+" : "在 Google+ 上关注我们!",
"You are using <strong>%s</strong> of <strong>%s</strong> (<strong>%s %%</strong>)" : "您使用了<strong>%s</strong>的<strong>%s</strong><strong>%s %%</strong>"
},"pluralForm" :"nplurals=1; plural=0;"
}