The ids of permission checkboxes for shares were generated using the
"shareWith" field of the share. The "shareWith" field can contain spaces
(as spaces are allowed, for example, in user or circle names), so this
could cause the id attribute of the HTML element to contain spaces too,
which is forbidden by the HTML specification.
It is not just a "formal" issue, though; when the list was rendered, if
the id contained a space the selector to get the checkbox element was
wrong (as it ended being something like
"#canEdit-view1-name with spaces") and thus the initial state of the
checkbox was not properly set.
Besides that, "shareWith" can contain too single quotes, which would
even cause the jQuery selector to abort the search and leave the UI in
an invalid state.
Instead of adding more cases to the regular expression to escape special
characters and apply it too when the ids are created now the ids of
permission checkboxes for shares are based on the "shareId" field
instead of on "shareWith", as "shareId" is expected to always contain
compatible characters.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Before, whenever a pending operation (getting the suggestions,
confirming a share or selecting a recipient) finished the working icon
was hidden and the confirm button was shown again, even if there were
other pending operations (the most common case is typing slowly on the
input field, as several operations to get the suggestions could pile if
the server response is not received fast enough). Now, the working icon
is not hidden until the last pending operation finishes.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When a share is confirmed the suggestions are got to check if there is
an exact match. Usually the suggestions were already got with the same
parameters in order to fill the autocomplete dropdown, so to avoid a
superfluous request now the last suggestions are reused when got again,
although only if the same parameters as the last time are used.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Besides confirming a share by clicking on the confirm button now it is
possible to do it by pressing enter on the input field.
Clicking on the confirm button implicitly hides the autocomplete
dropdown. On the other hand, pressing enter on the input field does not,
so the autocompletion must be disabled and closed when the confirmation
begins and then enabled again once it finishes. Otherwise the
autocomplete dropdown would be visible and it would be possible to
interact with it while the share is being confirmed.
The order in which the input field and the autompletion are disabled is
important. Internally, the autocompletion sets a timeout when the input
field is modified that requests the suggestions to the server and then
shows them in the dropdown. That timeout is not cancelled when the
autocompletion is disabled, but when the input field loses its focus and
the autocompletion is not disabled. Therefore, the input field has to be
disabled (which causes it to lose the focus) before the autocompletion
is disabled. Otherwise it could happen that while a share is being
confirmed the timeout ends, so an autocompletion request is sent and
then, once the share is successfully confirmed and thus the
autocompletion is enabled again, the request is received and the
autocomplete dropdown is shown with the old suggestions. Strange, but
possible nevertheless ;-)
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Clicking on the confirm button now adds a share, but only if there is
just a single exact match. If there are no exact matches or there is
more than one exact match no share is added, and the autocomplete
dropdown is shown again with all the suggestions.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
"_getSuggestions" returned all the suggestions from the server, which
are composed by exact matches and partial matches. Now the exact matches
are also returned on their own parameter. This will be used by the
button to confirm a share.
Note that until now the order of the suggestions was "exact users,
partial users, exact groups, partial groups, exact..."; this commit also
changes that order to become "exact users, exact groups, exact...,
partial users, partial groups, partial...". This is not a problem, as
the suggestions were used in the autocomplete dropdown, and this new
order is arguably better than the old one, as all exact matches appear
now at the beginning.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Instead of silently failing now an error is shown to the user when the
ajax call to get the suggestions succeeds yet it returns failure content
(for example, if an "OCSBadRequestException" was thrown in the server).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
"OC.Notification.hide" expects the notification to be hidden to be
passed as an argument. As it was being used to show a temporary
notification the combination of "OC.Notification.show" and
"OC.Notification.hide" was replaced by a single call to
"OC.Notification.showTemporary".
The timeout could have been specified in the options of the call, but it
was left to the default value (7 seconds) for consistency with other
notifications.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Stubs should be restored outside the test method in which they are used
to ensure that they are properly restored no matter the result of the
test (for example, if an exception is thrown).
Besides that, this will make possible to reuse the stub in other sibling
tests without having to explicitly setup it in them.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
As the server response is faked the search term is ignored in the tests.
However, it is clearer to use a search term that would make the server
return what the faked response contains.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The confirmation button right now is just an icon; its behaviour will be
added in the following commits.
Signed-off-by: Jan-Christoph Borchardt <hey@jancborchardt.net>
The avatar plugin should not change the display element, since the
avatar is always shown by default and the display value is up to the
developers
Signed-off-by: Julius Härtl <jus@bitgrid.net>
When a Snap was disabled it stopped listening to the events, but if a
drag gesture was being performed it was kept as active. Thus, when the
Snap was enabled again move events were handled as if the Snap had never
been disabled, causing the gesture handling to continue where it was
left.
When the Snap for the navigation bar is disabled by an app it could be
as a result of a different gesture being recognized by the app (for
example, a vertical swipe) once both gestures have started. In that case
when the other gesture ends and the Snap is enabled again any pointer
movement will cause the navigation bar to slide until an "up" event is
triggered again (obviously not the desired behaviour).
Due to all this now when the Snap for the navigation bar is disabled by
an app the current drag gesture for the navigation bar is ended.
Note that this was added as a parameter to "Snap.disable()" instead of
done unconditionally to keep back-compatibility with the previous
behaviour (probably not really needed as it is unlikely that any app is
using the Snap library relying on that behaviour... but just in case).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
On narrow screens a slide gesture can be used to open or close the
navigation bar. However that gesture could conflict at times with the
gestures used by certain apps (for example, if the right sidebar is open
the user may expect to close it by dragging it to the right, but that
could open the navigation bar instead depending on how the events are
handled). This commit makes possible for apps to disallow and allow
again that slide gesture.
In any case, note that applications can only disallow the gesture,
but they can not enable it. That is, they can prevent the gesture from
being used on narrow screens, but they can not make the gesture work on
wide screens; they are always limited by the base rules set by the core.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The slide gesture is enabled or disabled depending on the width of the
browser window. In order to easily control that width the karma-viewport
plugin is now used in the unit tests.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
In case of error, instead of a generic error message, an upload will
display whichever message is returned in the Sabre Exception, if
applicable.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Now that the permissions returned by the server specify whether a file
is readable or not the frontend no longer needs to assume that every
file is readable.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Now that these tests are executed they are revealed to be partially
obsolete; they were fixed to match the current parsing behaviour.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The first parameter of "apply" must be the object to act as "this", and
the Promise callback gets the parameters provided in the "resolve".
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The seed of the image placeholder is needed to generate the background
color of the image, but as the background color is later overriden any
seed could be used. When no text is explicitly given the seed is used as
text too, so there is no need to pass the user ID and simply using "?"
as seed is enough.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When calling the jQuery avatar plugin with a user that did not exist
(that is, users for which "/avatar/{user}/{size}" return a JSON response
with an empty "displayname" value) "?" on a grey background was shown.
However, if the jQuery avatar plugin was called with an undefined
JavaScript value then "?" was shown on a bluish background. This commit
unifies both cases to use the grey background.
The unit tests were also modified to ensure that the grey background is
used in both cases.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Fixed typo and removed doclink symbol.
Reported at transifex
Update util.php
Another l10n improvement from transifex.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
When we test wheter action menus in the contacts menu close
when clicking other ones, we have to provide test data
that actually causes the view to render the menu.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
When a request to set the password of a shared link is sent a working
icon is shown. However, as there was no "success" callback, the icon was
never hidden again after successfully setting the password (it worked
fine if there was an error, though).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Calls to `sinon.stub(obj, 'meth', fn)` are deprecated and therefore
replaced by `sinon.stub(obj, 'meth).callsFake(fn)` as instructed by
the deprecation warning.
This makes the js unit testing output readable again.
Signed-off-by: Christoph Wurst <christoph@winzerhof-wurst.at>
test files against ignore_files list on upload
fix typo and indentation
Move blacklist declaration to lib/public/Files/FileInfo.php,
Rename *ignored to *blacklisted
Mocked blacklist_files for testing
Mocked blacklist_files for testing
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
This mitigates issues where developers pass untrusted user-input through t() which may lead to XSS issues.
Signed-off-by: Lukas Reschke <lukas@statuscode.ch>
this fixes#3634
1. fixed computerFileSize to be more picky about incorrect values
2. more tests for computerFileSize
3. use computerFileSize to validate user quota
Signed-off-by: Artur Neumann <info@individual-it.net>
* we introduced this setting in the begining because our
avatar support caused some performance issues, but we
fixed them and should only provide one way how Nextcloud
looks
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
Enhanced the REPORT method on the Webdav endpoint and added a
"oc:favorite" filter rule. When set, it will return a flat list of
results filtered with only favorite files.
The web UI was also adjusted to use this REPORT method instead of the
private API endpoint.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Whenever the server returns true for the can-assign Webdav property of
a system tag, it means the current user is allowed to assign,
regardless of the value of user-assignable.
This commit brings the proper logic to the web UI to make it possible
for users to assign when they have the permission.
**Before:**
> Your PHP version (5.4.16) is no longer supported by PHP. We encourage you to upgrade your PHP version to take advantage of performance and security updates provided by PHP.
**After:**
> You are currently running PHP 5.4.0. We encourage you to upgrade your PHP version to take advantage of performance and security updates provided by the PHP Group as soon as your distribution supports it.
Fixes https://github.com/owncloud/enterprise/issues/1170
The notification tests were not restoring the clock properly, but
indirectly helped other tests pass.
Since now we're restoring the clock properly, the other tests were fixed
to still work.
Bjoern Schiessle
Morris Jobke
Roeland Jago Douma
Maxence Lange
Daniel Calviño Sánchez
Jan-Christoph Borchardt
Christoph Wurst
Vincent Petry
Maximilian Wende
Allan Nordhøy
Roeland Jago Douma
Abijeet
Julius Härtl
blizzz
Tobias Kaminsky
Lukas Reschke
John Molakvoæ (skjnldsv)
Markus Staab
rakekniven
Georg Ehrke
Joas Schilling
Felix Heidecke
Artur Neumann
m3ntalsp00n
Patrick Paysant
Robin Appelman
William Bargent
Derek
Thomas Müller
Hendrik Leppelsack
Lukas Reschke
Robin McCorkell
Christoph Wurst
Roeland Jago Douma