It seems iOS doesn't like us to change the location. So now we submit it
to the server that geneartes the redirect.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Because the redirect from the SAML/SSO endpoint is a POST the lax/strict
cookies are not properly send.
Note that it is not strictly requried on this endpoint as we do not need
the remember me data. Only the real session info is enough. The endpoint
is also already protected by a state token.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
The second execute statement should be inside the if block. Else it gets
executed twice which makes no sense.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
c23a66cda4 broke the system address book.
We now move the ACL rules for this special case up and all is good in
the world again.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Fixes#12498
This means that we set that it is a proper app token once it is
validated. This will allow the 2FA middleware to just run the same
check.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
* fixes#9305 by not being prone to the race condition in insertIfNotExists
* fixes#6899 by not using a query that can result in a deadlock
* replaces the insertIfNotExists call with an insert which is wrapped into a try-catch block
* followup to #12371
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
* fixes#6160 by not being prone to the race condition in insertIfNotExists
* fixes#12228 by not using a query that can result in a deadlock
* replaces the insertIfNotExists call with an insert which is wrapped into a try-catch block
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
Fixes#1020
When an external storage is shared with you in full the root is ''
(empty). This adds an extra check for an empty jail basically.
Because if the jail is on the empty string. It matches all paths.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
If doing achunked upload the mimetype of the folder would otherwise be
guessed from the path. Which always returned application/octet-stream.
If an access control rule to block that is in place this means that all
chunked uploads fail hard in directories as the isCreatable on the
directory always fails.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Fixes#12131
If we hit an expired token there is no need to continue checking. Since
we know it is a token.
We also should not register this with the bruteforce throttler as it is
actually a valid token. Just expired. Instead the authentication should
fail. And buisness continues as usual.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
When using atoken obtained via OAuth the token expires. Resulting in
brute force attempts hitting the requesting IP.
This resets the brute force attempts for that UID on a valid refresh of
the token.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
only write when the displayname differs, but then announce it
refs #5212 and fixes#9112
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
do not run into UniqueConstraintViolationException
… when an unmapped user logs in for the first time when background job
mode is ajax and no memcache was configured.
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
This will make it possible to act propely on moves of future files if we
need to know the size (like for max size virus scanning).
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
When obtaining the SourceRootInfo we can call init. If this fails the
cache is set to a failed cache and the storage to a failed storage.
However we did not check for this. Which means that if the storage was
invalid it would fail later on.
Now we will properly error out.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
If you now keep calling $node->getParent() you will at some point get
the RootFolder back. This is a nice termination check and will prevent
endless loops if an exit condition is slightly off.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
In 2f87fb6b45 this header was introduced. The referenced documentation says:
> When delivered with a response from https://example.com/clear, the following header will cause cookies associated with the origin https://example.com to be cleared, as well as cookies on any origin in the same registered domain (e.g. https://www.example.com/ and https://more.subdomains.example.com/).
This also applies if `https://nextcloud.example.com/` sends the `Clear-Site-Data: "cookies"` header.
This is not the behavior we want at this point!
So I removed the deletion of cookies from the header. This has no effect on the logout process as this header is supported only recently and the logout works in old browsers as well.
Signed-off-by: Patrick Conrad <conrad@iza.org>
(cherry picked from commit 1806baaeaf)
The custom handler for "URL changed" events were added to reload the
file list whenever the sections for favorites and shares were opened;
this was used to fix the problem of not reloading the file lists when
opening them for a second time. However, besides that the handlers were
not really necessary, and as the root of the bug was fixed in the
previous commit those handlers are now removed.
The file list for tags uses the handler for a different purpose, though,
so that one was kept.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When a section is open in the Files app a "show" event is triggered.
File list objects handle that event by reloading themselves, but only
if the file list was shown at least once. However, the file list objects
of plugins are created when the "show" event is triggered for the first
time for their section; as the file list objects register their handler
for the "show" event when they are created they never handle the first
triggered "show" event, as the handler is set while that event is being
already handled. Therefore, from the point of view of the handler, the
second time that a "show" event was triggered it was seen as if the file
list was shown for the first time, and thus it was not reloaded. Now the
"shown" property is explicitly set for those file lists that are created
while handling a "show" event, which causes them to be reloaded as
expected when opening their section again.
Note that it is not possible to just reload the file list whenever it is
shown; the file list is reloaded also when the directory changes, and
this can happen when the web page is initially loaded and the URL is
parsed. In that case, if file lists were reloaded when shown for the
first time then it could be reloaded twice, one with the default
parameters due to the "show" event and another one with the proper
parameters once the URL was parsed, and the files that appeard in the
list would depend on which response from the server was received the
last.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Before it quit right after finding the theme version of the l10n file which results in a not translated part of the UI.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
The old code would emit the hooks twice. Thus having the version written
twice. Which is not very performant as it is first read twice as well.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
We use the same logic for creating accounts without a password and there the 12h is a bit short. Users don't expect that the signup link needs to be clicked within 12h - 7d should be a more expected behavior.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
When "session_lifetime" can not be converted to a number the interval
becomes a NaN due to dividing it by 2. This NaN was "dragged" over all
the other mathematical operations and caused the heartbeat to be post
again and again due to an infinite loop with no pauses in "setInterval".
Now, the interval is set to the default value instead if the
"session_lifetime" can not be converted to a number.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
To allow us to create previews of files stored in appdata we need to
construct the view differently.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
For some reason the docker image does not setup the permissions correctly,
by using a different name the nextcloud installer will create the database instead
with the correct permissions
Signed-off-by: Robin Appelman <robin@icewind.nl>
The check is run only if its last parameter is true; data() tries to
convert the HTML attribute string to an actual JavaScript value, so
"true" is returned as an actual boolean instead of an string; as a
strict comparison against "true" was used the result was false and thus
the checks were not run.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Large files are not uploaded in a single operation, but uploaded in
several chunks; once all the chunks are uploaded then the server needs
to assemble them to get the final file.
Before, once the chunks were uploaded the progress bar was hidden.
However, this was confusing for the users, as the file could still need
some time to appear in the file list due to the assembling. Now once all
the chunks are uploaded the text in the progress bar changes to inform
the user that there are still some pending operations, and only when the
file is finally assembled the progress bar is hidden.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Before each scenario of the acceptance tests is run the Nextcloud server
is reset to a default state. To do this the full directory of the
Nextcloud server is commited to a local Git repository and then reset to
that commit when needed.
Unfortunately, Git does not support including empty directories in a
commit. Due to this, when the default state was restored, it could
happen that the file cache listed an empty directory that did not exist
because it was not properly restored (for example,
"data/appdata_*/css/icons"), and that in turn could lead to an error
when the directory was used.
Currently the only way to force Git to include an empty directory is to
add a dummy file to the directory (so it will no longer be empty,
but that should not be a problem in the affected directories, even if
the dummy file is not included in the file cache); although Git FAQ
suggests using a ".gitignore" file a ".keep" file was used instead, as
it conveys better its purpose.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
With 689df9a843 the behaviour to assign only
non-empty config IDs was introduced. Only, this was only effective for CLI
and OCS API.
Related to #3270.
The web UI creates now also a full configuration on first load. This fixes
#5094.
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
OCA.Sharing.SharedFileInfo was never defined and that stopped execution.
Interestingly, FF never showed me an error.
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
only update the encrypted version after the write operation is finished and the stream is closed
Signed-off-by: Bjoern Schiessle <bjoern@schiessle.org>
When the ownership of a user share is transfered to the receiver the
share is removed, as the receiver now owns the original file. However,
due to a missing condition, any share with a group, link or remote with
the same id as the user was removed, not only the user shares.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
\\b matches any non-word character, including \@ and \-
In order to not detect urls in the middle of email-addresses,
we need to check for white space characters and beginning of the
message instead.
Signed-off-by: Joas Schilling <coding@schilljs.com>
This can be caused by the code releasing more locks then it acquires,
once the lock value becomes negative it's likely that it will never be able
to change into an exclusive lock again.
Signed-off-by: Robin Appelman <robin@icewind.nl>
Sometimes when we force a session regeneration we want to update the
current token for this session.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Apperently Sabre and Onedrive are not friends when requesting a single
404 property. I need to dig deeper on why this is. Anyways requesting a
valid property makes it work like a charm.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Add "PARENT (2)" and its subdirectories to the paths to be checked, as
before only the own "PARENT" folder was being checked, but not the
shared one.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When a file is shared and the receiver of the share already has a file
with the same name that file is left untouched, and "(2)" is appended to
the name of the shared file.
As "textfile0.txt" is included in the user folder skeleton all the users
in the integration test have that file, so when it is shared the
receiver sees the share as "/textfile0 (2).txt", and her own file as
"/textfile0.txt".
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Refers to issue #8220
user_ldap configured with custom filters for active directory access
(group-member-association is "member"). Then it can happen that the
members of a group contain members that don't belong to the users
available in Nextcloud (the most trivial reason is that the user filter
contains "(!(UserAccountControl:1.2.840.113556.1.4.803:=2))" to exclude
disabled users from being imported).
This can be fixed by applying the ldapUserFilter when resolving the UID
for a DN fetched from the group's member list.
Signed-off-by: Roland Tapken <roland@bitarbeiter.net>
When the browser reports a drag of items other than files (for example,
text) and then triggers a drop event with no files no error message
should be shown to the user, as in that case there would be no highlight
of the drop zone and no indication that the drop would be valid (except
for the mouse cursor); the error message should be shown only when
the drop event with no files follows a file drag.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The highlighting was removed in Firefox when the cursor was no longer
moving to handle the behaviour of reporting a file drag and then
providing no files in the drop event. That behaviour (which was only
present in Firefox 48 and 49) is already handled with the "dropnofiles"
callback, so that special handling is no longer needed.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When a file is dragged from the desktop to the file list the file list
is highlighted, and when the file is finally dropped or the drag
operation is cancelled the highlighting is removed. In some cases, due
to a wrong implementation, a browser may end a file drag with a drop
with no files (for example, when a folder or text is dragged), which
would cause the highlight to not be removed. Now those cases are handled
with the "dropnofiles" callback, which restores the UI and also shows a
message to the user.
The error message is just a generic one, as in some cases it is not even
possible to know whether the problem came from a text drag or a folder
drag, and whether the problem appears or not depends on the browser,
version and even operating system.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The jQuery Plugin triggers the "dragover" callback when the browser
triggers the "dragover" event and the types in their DataTransfer
include a "Files" item. It also triggers the "drop" callback when the
browser triggers the "drop" event and the list of files in its
DataTransfer is not empty.
Unfortunately some browsers may trigger "dragover" events with a
DataTransfer that includes a "Files" item and then trigger a "drop"
event with an empty list of files. When that happens the actions
performed in the "dragXXX" callbacks could be left hanging if they were
expected to be finished in the "drop" callback (for example, if the drop
zone was highlighted during the drag to be then restored when the file
was finally dropped). This commit adds the "dropnofiles" callback to be
able to handle those situations.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
"disableDropState" was set as the event handler in 8d4e5747f3, but
the duplicated code was accidentally added back in 786e858d23.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Some bad databases don't respect the default null apprently.
Now even if they cast it to 0 it should work just fine.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
If a PUT request comes in that is not JSON or from encoded. Then we can
only read it (exactly) once. If that is the case we must assume no
shared secret is set.
If we don't then we either are the first to read it, thus causing the
real read of the data to fail.
Or we are later and then it throws an exception (also failing the
request).
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
When using fake servers with Sinon.JS, the JavaScript test framework,
the XHR objects are also fake. In Sinon 5.0.8 the "setRequestHeader" of
XMLHttpRequest was modified to normalize the header values (as requested
by the spec), but since then only string values are accepted; null or
integer values can no longer be passed to "setRequestHeader", as it
expects the "replace" function to be available in the object. However,
in the tests null and integer values are passed to "setRequestHeader",
which causes them to fail.
Both Firefox and Chromium accept passing non-string values to their
"setRequestHeader" implementation, and it is done, for example, in
davclient.js; it is not clear yet whether Sinon got too restrictive or
the code calling "setRequestHeader" was too loose. Given that
davclient.js is an external dependency, as a temporary measure Sinon
version is forced to be 5.0.7 at most until either Sinon or davclient.js
are updated.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Fixes#9469
When a version of a file is restored the previews are no longer valid.
Thus we should remove them so they are regenerated.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Ignore unavailable files when fetching the share's mtime
or reading directory listings. This can happen on servers using a
distributed file system (DFS) with unavailable destinations, for example
when the remote server is offline.
Signed-off-by: Roland Tapken <roland@bitarbeiter.net>
However due to the nature of what we store in the token (encrypted
passwords etc). We can't just delete the tokens because that would make
the oauth refresh useless.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
allow to specify a link to a legal notice
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
fix tests
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
fix undo for url-typed inputs
and minor adjustments
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
Use link not address in labels for URLs
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
this file does not belong here
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
The escaping of special characters was needed when the ids of the
permission checkboxes for shares were based on the "shareWith" field.
Since they are based on the "shareId" field the escaping is no longer
needed, as the "sharedId" is expected to always contain compatible
characters.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The ids of permission checkboxes for shares were generated using the
"shareWith" field of the share. The "shareWith" field can contain spaces
(as spaces are allowed, for example, in user or circle names), so this
could cause the id attribute of the HTML element to contain spaces too,
which is forbidden by the HTML specification.
It is not just a "formal" issue, though; when the list was rendered
after a permission change, if the id contained a space the selector to
get the checkbox element was wrong (as it ended being something like
"#canEdit-view1-name with spaces") and thus the updated state of the
checkbox was not properly set.
Besides that, "shareWith" can contain too single quotes, which would
even cause the jQuery selector to abort the search and leave the UI in
an invalid state.
Instead of adding more cases to the regular expression to escape special
characters and apply it too when the ids are created now the ids of
permission checkboxes for shares are based on the "shareId" field
instead of on "shareWith", as "shareId" is expected to always contain
compatible characters.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Before any upload is submitted the upload is registered in a list of
known uploads; this is needed to retrieve the upload object at several
points of the upload process. When a chunked upload is submitted first a
directory to upload all the chunks is created and, once that is done,
the chunks are sent; in order to send a chunk the upload object needs to
be retrieved from the list of known uploads.
When all the active uploads were finished the list of known uploads was
cleared. However, an upload is not active until it actually starts
sending the data, so while waiting for the upload directory to be
created the upload is already in the list of known uploads yet not
active. Due to all this, if the active uploads finished while another
pending upload was waiting for the upload directory to be created that
pending upload would be removed from the list of known uploads too, and
once the directory was created and thus the chunks were sent a field of
a null upload object would be accessed thus causing a failure.
Instead of removing all the known uploads at once when the active
uploads finish now each upload is explicitly removed when it finishes.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Related to #8929
We should get the version of the app. Not of the appfolder. Else there
is no way to properly compare the versions.
Now note that installing in 1 go will still fail. But at least on the
next page load the new version will be properly detected.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
The jQuery File Upload plugin triggers the "stop" event once there are
no more files being uploaded (even if some of them were added when
another upload was already in progress). Therefore, the progress bar
should be hidden in the "fileuploadstop" callback.
In some cases the "stop" event is not triggered and thus the progress
bar is not hidden once no more files are being uploaded. This is caused
by a race condition and it will be fixed in another commit; except in
buggy cases like that one (that need to be fixed anyway) it is safe to
hide the progress bar in the "fileuploadstop" callback.
In any case, note that the callbacks in "fileuploaddone" may be called
after the "stop" event was triggered and handled when using chunked
uploads. In that case once all the chunks are uploaded the assembled
file is moved to its final destination, so its promise could be resolved
after the "stop" event was triggered. Therefore a different approach
would be needed to keep the progress bar visible until the chunked
upload is truly finished, but for the time being the current one is good
enough.
Before this commit the progress bar was being hidden when the first
upload finished, either successfully or with an error, no matter if
there were other files being uploaded too.
The progress bar was being explicitly hidden also when the upload was
cancelled. When an upload is cancelled all the single uploads are
aborted, which triggers a "fail" event for each of them. However, the
"stop" event is always triggered when no more files are being uploaded,
so it is triggered too once all the single uploads were aborted. As all
the single uploads are immediately aborted in a loop when the general
upload is cancelled it makes no difference to hide the progress bar when
the first single upload is aborted or when all the single uploads were
aborted, so the progress bar is no longer explicitly hidden in the
former case.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Fixes#9028
For federated shares the share table holds no target information (since
it is on the other server). So when a node is actually invalid and not
found we should not display it anymore in the shared with sections etc
and thus throw the proper exceptions.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Fixes#8890
In case you have access to a file via multiple ways, for example:
1. the file is shared with you with permission read only
2. the folder containing the file is shared with your read/write
Requesting the getById function on the userFolder would give back two
entries but both with the same permissions. Depending on the node you
picked this is not right.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Before, the avatar for a circle share was generated using the
"share_with" field as the seed for "imageplaceholder". Due to this, when
the "share_with" field is set to the circle ID the character shown in
the avatar was just a random character instead of the first character of
the display name. Now the "share_with" is still used as the seed for the
colour, but the display name is used as the text of the avatar.
This adds support for "share_with" fields set to the circle ID while
being backwards compatible with "share_with" fields set to the circle
name.
Note that when "share_with" fields is set to the circle name the colour
of the avatar is different in the list of suggested sharees and in the
list of current sharees, but that also happened before these changes
(due to a different seed being used in each place).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When a share is shared with a circle the "share_with" field returned by
the API endpoint was always set to the name of the circle. However, the
name is not enough to identify a circle. The Circles app now provides
the ID of the circle in the "shared with" field of a Share, so this
commit modifies the API endpoint to set the "share_with" field to the ID
of the circle when provided by the Circles app.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "FileListContext" provides steps to interact with and check the
behaviour of a file list. However, the "FileListContext" does not know
the right file list ancestor that has to be used by the file list steps,
so until now the file list steps were explicitly wired to the Files app
and they could be used only in that case.
Instead of duplicating the steps with a slightly different name (for
example, "I create a new folder named :folderName in the public shared
folder" instead of "I create a new folder named :folderName") the steps
were generalized; now contexts that "know" that certain file list
ancestor has to be used by the FileListContext steps performed by
certain actor from that point on (until changed again) set it
explicitly. For example, when the current page is the Files app then the
ancestor of the file list is the main view of the current section of the
Files app, but when the current page is a shared link then the ancestor
is set to null (because there will be just one file list, and thus its
ancestor is not relevant to differentiate between instances)
A helper trait, "FileListAncestorSetter", was introduced to reduce the
boilerplate needed to set the file list ancestor from other contexts.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The file list is used in other places besides the Files app (for
example, the File sharing app); in those cases the locators for the file
list elements are the same, but not for the ancestor of the file list.
To make possible to reuse the file list locators in those cases too now
they receive the ancestor to use.
Note that the locators for the file actions menu were not using an
ancestor locator because it is expected that there is only one file
actions menu at a time in the whole page; that may change in the future,
but for the time being it is a valid assumption and thus the ancestor
was not added to those locators in this commit.
Although the locators were generalized the steps themselves still use
the "FilesAppContext::currentSectionMainView" locator as ancestor; the
steps will be generalized in a following commit.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Besides the extraction some minor adjustments (sorting locators for file
action menu entries to reflect the order of the menu entries in the UI,
moving parametrized locators like "createMenuItemFor" above the locators
that use them and placing "descendantOf" calls always in a new line)
were made too.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Avoids errors when the size exceeds MAX_INT because of the cast to int. Better cast it to float to avoid this.
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
Fixes#8705
If the file does not exist (for whatever reason). It is never cached. No
matter what the depscache etc tell you.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
NoSuchElement exceptions are sometimes thrown instead of
StaleElementReference exceptions. This can happen when the Selenium2
driver for Mink performs an action on an element through the WebDriver
session instead of directly through the WebDriver element. In that case,
if the element with the given ID does not exist, a NoSuchElement
exception would be thrown instead of a StaleElementReference exception,
so those cases are handled like StaleElementReference exceptions.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
MoveTargetOutOfBounds exceptions are sometimes thrown instead of
ElementNotVisible exceptions. This can happen when the Selenium2 driver
for Mink moves the cursor on an element using the "moveto" method of the
Webdriver session, for example, before clicking on an element. In that
case, if the element is not visible, "moveto" would throw a
MoveTargetOutOfBounds exception instead of an ElementNotVisible
exception, so those cases are handled like ElementNotVisible exceptions.
Note that MoveTargetOutOfBounds exceptions could be thrown too if the
element was visible but "out of reach"; there is no problem in handling
those cases as if the element was not visible, as the exception will be
thrown again anyway once it is verified that the element is indeed
visible.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Nextcloud 13RC4, error in logfile, triggered by "occ config:list":
Invalid argument supplied for foreach() at lib/private/AppConfig.php#297
PHP Undefined index: workflowengine at lib/private/AppConfig.php#297
Fix: Check if index exists in array before using it.
The check in URLGenerator.php#169 and Server.php#945 are different and thus the DI container could return a \OC_Defaults object which does not provide the wanted method caising a PHP error.
Fixes#8420
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
MySQL databases with the ANSI_QUOTES mode enabled treat " as an identifier
quote (see https://dev.mysql.com/doc/refman/5.7/en/sql-mode.html#sqlmode_ansi_quotes).
So for such databases the 'occ upgrade' fails with an error message like this:
... unknown column 'oc_*' in where clause.
This fix replaces the doulbe quotes with single quotes that should be always
used in MySQL queries to quote literal strings.
Signed-off-by: Robin Müller <robin.mueller@1und1.de>
if file_get_contents fails remove the file. And traverse up the tree
checking if the other folders are there.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
test creating comments with numeric user ids
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
fix creating comments when file is accessible to users with numeric ids
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
tests for systemtags related to numeric user ids
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
fix systemtags event with numeric user ids
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
Menu and home are not always visible; home is always visible, but menu
is shown only when needed.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
"getTotalWidth" is not more accurate; it is simply not clamped.
Moreover, "width/outerWidth" could be used in tests too, and also even
if "getTotalWidth" could be used in tests while others not that would
not be something to be stated in the API documentation, but in a
comment.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
After the changes in the previous commit "_showCrumb" no longer shows
the menu, only the same crumb that was hidden by the last call to
"_hideCrumb". Therefore, if the crumb was hidden because it did not fit
there is no need to try to show it again, as it will still not fit.
Moreover, the calculated width for a hidden element is not always
accurate; in some cases the calculated width is lower than the actual
width (it happens, for example, when using a background image like the
"Share" icon), which causea the crumb to be shown even if there is not
enough room, which in the end causes the siblings to overflow the
contents.
No unit tests for this one, though; you will have to trust me on this,
sorry ;-)
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The crumb for the menu was shown like any other crumb when calling
"_showCrumb", but it was also shown when other crumbs were hidden
without taking into account the available width. This caused several
related problems, like the breadcrumbs taking too much space when the
menu was sometimes shown after the rest of the crumbs were adjusted to
the available width, or the menu being shown instead of the last crumb
even if there was room for it when the available width was increased.
Now the menu is always hidden before starting the resizing of the crumbs
to ensure that whether it was previously shown or not does not affect
the result. In a similar way, the menu will no longer be shown by
"_showCrumb", as it is not a regular crumb that has to be shown simply
if there is enough room. The menu is now shown as soon as any other
crumb is hidden; this ensures that the menu width will be taken into
account in further width checks. As when _updateMenu" is called it no
longer needs to take care of showing the menu this fixes the issue
revealed when fixing the test setup in the previous commit.
Finally, this implicitly fixes the failure in the breadcrumbs tests when
run on Firefox, as it was caused by the menu interfering in the
calculations of the other crumbs when increasing the width.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "Shows only items not in the breadcrumb" test was failing when run
on Firefox, but not on PhantomJS. This was caused by the differences in
the starting width between both browsers and an incorrect setup of the
test (the width set for the crumbs was overriden when the breadcrumbs
were rendered again, and the breadcrumb was resized to 300 from an
indeterminate initial width).
Now the crumbs are rendered and then its width, padding and margin are
set to a known value. Then it is resized to 1000px, which ensures that
there will be enough room for all the crumbs and thus the menu will be
hidden, and finally it is resized to 300, which causes the middle crumb
to be hidden and the menu to be shown.
Note, however, that the test now always fails, no matter if it is run on
PhantomJS or on Firefox; if the menu crumb is hidden when "_updateMenu"
is called it will show it, but it will also wrongly try to add the menu
itself to the menu. As the "crumb-id" of the menu crumb is "-1" this
causes the last regular crumb to be added to the menu. This will be
fixed with other related issues in the next commit.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When calculating the total width of the crumbs only its padding was
taken into account; now the margin is too. In a similar way, before
showing a crumb only its width was taken into account; now its padding
and margin are taken into account too.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
This ensures that the resize tests do not depend on the values set in
the CSS files.
Note that this change causes a test to fail with Firefox, but not with
PhantomJS. This is due to a difference in the starting width used by
Firefox and by PhantomJS, and it will be fixed in a following commit.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
When the parent element of the breadcrumbs was resized to a larger width
and the siblings of the breadcrumbs expanded to fill all the available
width some crumbs could be hidden even if there was enough room for
them. The reason was that the width of the siblings being used to
calculate the available width for the breadcrumbs was the expanded width
of the siblings. Now as many crumbs as possible (that is, fitting in the
parent, no matter the siblings) are first shown so the expanding
siblings are compressed before calculating the available width.
Due to the lack of support for flexboxes in PhantomJS the related unit
test is skipped; it has to be run in other browser, like Firefox.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Other apps could add elements to the controls outside the creatable
actions div (for example, the button to switch to the gallery), so the
widths of all the visible siblings of the breadcrumbs have to be taken
into account in the size calculations.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
There are some differences in width handling between the browsers used
to run the tests, most likely due to their support (or lack of) of
certain CSS features: PhantomJS requires "width" to be set (probably
because it does not handle flex displays and treats it like a block, so
"min-width" does not matter in this case), while Firefox requires
"min-width" to be set (otherwise the children of "#controls" could be
compressed due to its use of flex display and the elements would end
with a different width than the one needed for the tests). Due to all
that the width of the breadcrumb siblings must be specified in the tests
using both "width" and "min-width".
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
There is no need to call "setDirectory" again in resize tests; it is
enough to simply resize them (and isolates them better to just test the
resizing behaviour).
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The "usedWidth" attribute was not used elsewhere outside the "_resize"
method, so it was replaced with a local variable. Moreover, it was also
renamed to a more suitable name ("availableWidth").
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Setting the width of the parent element of the breadcrumbs and then
explicitly calling "_resize" is enough to test the resizing behaviour.
This makes possible to remove the "setMaxWidth" method and its related
code, which was used only for testing purposes.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The div that contains the elements related to the creation of new files,
and thus the upload button, is always present in the DOM; it is hidden
or shown based on the folder permissions by adding or removing the
"hidden" CSS class. However, as the other CSS classes for the div are
"actions" and "creatable" and a "display: flex" rule was defined for
".actions.creatable" below the "display: none" rule for
".actions.hidden" the last one took precedence and the div ended being
always visible, even if the "hidden" CSS class was set. Now the rules
for the ".actions.hidden" selector are defined below the rules for the
".actions.creatable" selector and thus the "display: none" rule is
applied as expected.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Currently, the theming app assumes it's in the serverroot. However, with
Nextcloud's flexibility regarding configurable app paths, this is not a
safe assumption to make. If it happens to be an incorrect assumption,
the theming app fails to work.
Instead of relying on the serverroot, just use the path from the
AppManager and utilize relative paths for assets from there.
Fix#8462
Signed-off-by: Kyle Fazzari <kyrofa@ubuntu.com>
* adds a 107 error code together with the hint of the exception
* logs the exception as warning
* fixes#7946
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
This fixes#8451 where the first character is a non-ASCII character. The `$string[0]` notation only extracted one byte and thus resulting in an invalid code. The `mb_strtoupper` method also allows to convert characters independently from the current locale on the server.
See also http://php.net/manual/en/function.mb-strtoupper.php
Signed-off-by: Morris Jobke <hey@morrisjobke.de>
1. Local users should not be returned when searching for empty string
2. The limit of the response should be respected
Signed-off-by: Joas Schilling <coding@schilljs.com>
Instead of checking that the list contains one comment it is now checked
that a comment with certain message is visible. This makes the step (and
the locator) more reusable in future tests and also simplifies the code.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Depending on the previous steps the new comment field may be already
shown or not when the step to create a new comment is executed.
Therefore, the timeout was increased from 2 to the "standard" 10 seconds
used in other tests.
If the new comment field was found there is no need to use a timeout
when looking for the new comment button; it is either there or not, it
will not appear after some time.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
The locators are moved above the step definitions for consistency with
other context files; besides that I made some minor adjustments for
consistency too in the locator descriptions and identation, and moved
the locators for ".newCommentRow" descendants together.
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
Fixes#8047
If we can't find the file by id there we should just return null instead
of trying to get the jailed path of null.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
Exposing the encrypted property is required for E2E. However, there is
no need to expose this on files as then it is server side encryption
(which the clients don't care about).
Better to not confuse the output.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
* We first try the email as username but this fails
* Then we get the uid from the email and try again
We should not log the first attempt since it polutes the log with failed
login attempts while the login actually is valid.
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
The clipboard icon in shared links appears either directly on the link
input field or, if any social sharing app is enabled, in a menu. The
clipboard icon uses the same CSS rules as other icons (like the
information icon) to be posioned on the end of the input field, and
those rules have to be "cancelled" when the icon is shown in the menu.
Fixes#7990
Signed-off-by: Daniel Calviño Sánchez <danxuliu@gmail.com>
* delete it
* throw a NotFound Exception
- This should a proper 404 to the user
- Next time it is then regenerated
Signed-off-by: Roeland Jago Douma <roeland@famdouma.nl>
comments should compile mentions also if done by author
it is used by clients for formatting reasons, there is no reason not format
the author if her handle is included in the comment body.
It is unrelated to sending out notifications.
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
do not offer the handle of the current user for auto completion
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
add types to php doc
Signed-off-by: Arthur Schiwon <blizzz@arthur-schiwon.de>
Note: This is the **issue tracker of Nextcloud**, please do NOT use this to get answers to your questions or get help for fixing your installation. This is a place to report bugs to developers, after your server has been debugged. You can find help debugging your system on our home user forums: https://help.nextcloud.com or, if you use Nextcloud in a large organization, ask our engineers on https://portal.nextcloud.com. See also https://nextcloud.com/support for support options.
Nextcloud is an open source project backed by Nextcloud GmbH. Most of our volunteers are home users and thus primarily care about issues that affect home users. Our paid engineers prioritize issues of our customers. If you are neither a home user nor a customer, consider paying somebody to fix your issue, do it yourself or become a customer.
Guidelines for submitting issues:
* Please search the existing issues first, it's likely that your issue was already reported or even fixed.
- Go to https://github.com/nextcloud and type any word in the top search/command bar. You probably see something like "We couldn’t find any repositories matching ..." then click "Issues" in the left navigation.
- You can also filter by appending e. g. "state:open" to the search string.
- More info on search syntax within github: https://help.github.com/articles/searching-issues
* This repository https://github.com/nextcloud/server/issues is *only* for issues within the Nextcloud Server code. This also includes the apps: files, encryption, external storage, sharing, deleted files, versions, LDAP, and WebDAV Auth
* SECURITY: Report any potential security bug to us via our HackerOne page (https://hackerone.com/nextcloud) following our security policy (https://nextcloud.com/security/) instead of filing an issue in our bug tracker.
* The issues in other components should be reported in their respective repositories: You will find them in our GitHub Organization (https://github.com/nextcloud/)
* You can also use the Issue Template app to prefill most of the required information: https://apps.nextcloud.com/apps/issuetemplate
-->
<!--- Please keep this note for other contributors -->
### How to use GitHub
* Please use the 👍 [reaction](https://blog.github.com/2016-03-10-add-reactions-to-pull-requests-issues-and-comments/) to show that you are affected by the same issue.
* Please don't comment if you have no relevant information to add. It's just extra noise for everyone subscribed to this issue.
* Subscribe to receive notifications on status change and new comments.
### Steps to reproduce
1.
2.
3.
### Expected behaviour
Tell us what should happen
### Actual behaviour
Tell us what happens instead
### Server configuration
**Operating system:**
**Web server:**
**Database:**
**PHP version:**
**Nextcloud version:** (see Nextcloud admin page)
**Updated from an older Nextcloud/ownCloud or fresh install:**
**Where did you install Nextcloud from:**
**Signing status:**
<details>
<summary>Signing status</summary>
```
Login as admin user into your Nextcloud and access
Note: This is the **issue tracker of Nextcloud**, please do NOT use this to get answers to your questions or get help for fixing your installation. This is a place to report bugs to developers, after your server has been debugged. You can find help debugging your system on our home user forums: https://help.nextcloud.com or, if you use Nextcloud in a large organization, ask our engineers on https://portal.nextcloud.com. See also https://nextcloud.com/support for support options.
Nextcloud is an open source project backed by Nextcloud GmbH. Most of our volunteers are home users and thus primarily care about issues that affect home users. Our paid engineers prioritize issues of our customers. If you are neither a home user nor a customer, consider paying somebody to fix your issue, do it yourself or become a customer.
Guidelines for submitting issues:
* Please search the existing issues first, it's likely that your issue was already reported or even fixed.
- Go to https://github.com/nextcloud and type any word in the top search/command bar. You probably see something like "We couldn’t find any repositories matching ..." then click "Issues" in the left navigation.
- You can also filter by appending e. g. "state:open" to the search string.
- More info on search syntax within github: https://help.github.com/articles/searching-issues
* This repository https://github.com/nextcloud/server/issues is *only* for issues within the Nextcloud Server code. This also includes the apps: files, encryption, external storage, sharing, deleted files, versions, LDAP, and WebDAV Auth
* SECURITY: Report any potential security bug to us via our HackerOne page (https://hackerone.com/nextcloud) following our security policy (https://nextcloud.com/security/) instead of filing an issue in our bug tracker.
* The issues in other components should be reported in their respective repositories: You will find them in our GitHub Organization (https://github.com/nextcloud/)
-->
<!--- Please keep this note for other contributors -->
### How to use GitHub
* Please use the 👍 [reaction](https://blog.github.com/2016-03-10-add-reactions-to-pull-requests-issues-and-comments/) to show that you are interested into the same feature.
* Please don't comment if you have no relevant information to add. It's just extra noise for everyone subscribed to this issue.
* Subscribe to receive notifications on status change and new comments.
**Is your feature request related to a problem? Please describe.**
A clear and concise description of what the problem is. Ex. I'm always frustrated when [...]
**Describe the solution you'd like**
A clear and concise description of what you want to happen.
**Describe alternatives you've considered**
A clear and concise description of any alternative solutions or features you've considered.
**Additional context**
Add any other context or screenshots about the feature request here.
Thanks for your first pull request and welcome to the community!
Feel free to keep them coming! If you are looking for issues to tackle then have a look at this selection:https://github.com/nextcloud/server/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22
@ -4,7 +4,7 @@ If you have questions about how to install or use Nextcloud, please direct these
### Short version
* The [**issue templates can be found here**][templates] but be aware of the different repositories! See list below. Please always use an issue template when reporting issues.
* The [**issue template can be found here**][template] but be aware of the different repositories! See list below. Please always use the issue template when reporting issues.
### Guidelines
* Please search the existing issues first, it's likely that your issue was already reported or even fixed.
@ -12,14 +12,14 @@ If you have questions about how to install or use Nextcloud, please direct these
- You can also filter by appending e. g. "state:open" to the search string.
- More info on [search syntax within github](https://help.github.com/articles/searching-issues)
* This repository ([server](https://github.com/nextcloud/server/issues)) is *only* for issues within the Nextcloud Server code. This also includes the apps: files, encryption, external storage, sharing, deleted files, versions, LDAP, and WebDAV Auth
* __SECURITY__: Report any potential security bug to us via [our HackerOne page](https://hackerone.com/nextcloud) following our [security policy](https://nextcloud.com/security/) instead of filing an issue in our bug tracker.
* __SECURITY__: Report any potential security bug to us via [our HackerOne page](https://hackerone.com/nextcloud) or security@nextcloud.com following our [security policy](https://nextcloud.com/security/) instead of filing an issue in our bug tracker.
* The issues in other components should be reported in their respective repositories: You will find them in our [GitHub Organization](https://github.com/nextcloud/)
* Report the issue using one of our [templates][templates], they include all the information we need to track down the issue.
* Report the issue using our [template][template], it includes all the information we need to track down the issue.
Help us to maximize the effort we can spend fixing issues and adding new features, by not reporting duplicate issues.
* 📁**Access your Data** You can store your files, contacts, calendars and more on a server of your choosing.
* 🔄**Sync your Data** You keep your files, contacts, calendars and more synchronized amongst your devices.
* 🙌**Share your Data** …by giving others access to the stuff you want them to see or to collaborate with.
* 🚀 **Expandable with hundreds of Apps** ...like [Calendar](https://github.com/nextcloud/calendar), [Contacts](https://github.com/nextcloud/contacts), [Mail](https://github.com/nextcloud/mail), [Video Chat](https://github.com/nextcloud/spreed) and all those you can discover in our [App Store](https://apps.nextcloud.com)
* 🔒**Security** with our encryption mechanisms, [HackerOne bounty program](https://hackerone.com/nextcloud) and two-factor authentication.
* :file_folder:**Access your Data** You can store your files, contacts, calendars and more on a server of your choosing.
* :package:**Sync your Data** You keep your files, contacts, calendars and more synchronized amongst your devices.
* :arrows_counterclockwise:**Share your Data** …by giving others access to the stuff you want them to see or to collaborate with.
* :rocket: **Expandable with dozens of Apps** ...like [Calendar](https://github.com/nextcloud/calendar), [Contacts](https://github.com/nextcloud/contacts), [Mail](https://github.com/nextcloud/mail) and all those you can discover in our [App Store](https://apps.nextcloud.com)
* :lock:**Security** with our encryption mechanisms, [HackerOne bounty program](https://hackerone.com/nextcloud) and two-factor authentication.
You want to learn more about how you can use Nextcloud to access, share and protect your files, calendars, contacts, communication & more at home and at your organization? [**Learn about all our Features**](https://nextcloud.com/athome/).
*You want to learn more about how you can use Nextcloud to access, share and protect your files, calendars, contacts, communication & more at home and at your Enterprise?* [**Learn about all our Features**](https://nextcloud.com/features).
## Get your Nextcloud 🚚
## Get your Nextcloud
- ☑️ [**Simply sign up**](https://nextcloud.com/signup/) at one of our providers either through our website or through the apps directly.
- 🖥 [**Install** a server by yourself](https://nextcloud.com/install/#instructions-server) on your own hardware or by using one of our ready to use **appliances**
- 📦 Buy one of the [awesome **devices** coming with a preinstalled Nextcloud](https://nextcloud.com/devices/)
- 🏢 Find a [service **provider**](https://nextcloud.com/providers/) who hosts Nextcloud for you or your company
- [**Install** a server by yourself on your own hardware or by using one of our ready to use **Appliances**](https://nextcloud.com/install/#instructions-server)
- [Buy one of the awesome **devices** coming with a preinstalled Nextcloud](https://nextcloud.com/devices/)
- [Find a service **provider** who is hosting Nextcloud for you or your company](https://nextcloud.com/providers/)
Enterprise? Public Sector or Education user? You may want to have a look into [**Nextcloud Enterprise**](https://nextcloud.com/enterprise/) provided by Nextcloud GmbH.
*Enterprise? Public Sector or Education user? You may want to have a look into the [**Enterprise Support Subscription**](https://nextcloud.com/enterprise/) provided by the Nextcloud GmbH*
You can also [get support for Nextcloud](https://nextcloud.com/support)!
[…learn more about how to get support for Nextcloud here!](https://nextcloud.com/support)
## Join the team 👪
There are many ways to contribute, of which development is only one! Find out [how to get involved](https://nextcloud.com/contribute/), including as translator, designer, tester, helping others and much more! 😍
### Development setup 👩💻
1. 🚀 [Set up your local development environment](https://docs.nextcloud.com/server/latest/developer_manual/getting_started/devenv.html)
2. 🐛 [Pick a good first issue](https://github.com/nextcloud/server/labels/good%20first%20issue)
3. 👩🔧 Create a branch and make your changes. Remember to sign off your commits using `git commit -sm "Your commit message"`
4. ⬆ Create a [pull request](https://opensource.guide/how-to-contribute/#opening-a-pull-request) and `@mention` the people from the issue to review
5. 👍 Fix things that come up during review
6. 🎉 Wait for it to get merged!
Third-party components are handled as git submodules which have to be initialized first. So aside from the regular git checkout invoking `git submodule update --init` or a similar command is needed, for details see Git documentation.
Several apps that are included by default in regular releases such as [First run wizard](https://github.com/nextcloud/firstrunwizard) or [Activity](https://github.com/nextcloud/activity) are missing in `master` and have to be installed manually by cloning them into the `apps` subfolder.
Otherwise, git checkouts can be handled the same as release archives, by using the `stable*` branches. Note they should never be used on production systems.
### Working with front-end code 🏗
#### Building
We are moving more and more towards using Vue.js in the frontend, starting with Settings. For building the code on changes, use these terminal commands in the root folder:
``` bash
# install dependencies
make dev-setup
# build for development
make build-js
# build for development and watch edits
make watch-js
# build for production with minification
make build-js-production
```
#### Commiting changes
**When making changes, also commit the compiled files!**
We still use Handlebars templates some places in Files and Settings. We will replace these step-by-step with Vue.js, but in the meantime you need to compile them separately.
If you don’t have Handlebars installed yet, you can do it with this terminal command:
```
sudo npm install -g handlebars
```
Then inside the root folder of your local Nextcloud development installation, run this command in the terminal every time you changed a `.handlebars` file to compile it:
```
./build/compile-handlebars-templates.sh
```
Before checking in JS changes, make sure to also build for production:
```
make build-js-production
```
Then add the compiled files for committing.
To save some time, to only rebuild for a specific app, use the following and replace the module with the app name:
```
MODULE=user_status make build-js-production
```
Please note that if you used `make build-js` or `make watch-js` before, you'll notice that a lot of files were marked as changed, so might need to clear the workspace first.
### Working with back-end code 🏗
When changing back-end PHP code, in general no additional steps are needed before checking in.
However, if new files were created, you will need to run the following command to update the autoloader files:
```bash
build/autoloaderchecker.sh
```
After that, please also include the autoloader file changes in your commits.
### Tools we use 🛠
- [👀 BrowserStack](https://browserstack.com) for cross-browser testing
- [🌊 WAVE](https://wave.webaim.org/extension/) for accessibility testing
- [🚨 Lighthouse](https://developers.google.com/web/tools/lighthouse/) for testing of performance, accessibility and more
## Contribution guidelines 📜
## Contribution Guidelines
All contributions to this repository from June, 16 2016 on are considered to be
licensed under the AGPLv3 or any later version.
@ -139,6 +52,16 @@ changed it substantially:
Please read the [Code of Conduct](https://nextcloud.com/community/code-of-conduct/). This document offers some guidance to ensure Nextcloud participants can cooperate effectively in a positive and inspiring atmosphere, and to explain how together we can strengthen and support each other.
Please review the [guidelines for contributing](.github/CONTRIBUTING.md) to this repository.
Please review the [guidelines for contributing](https://github.com/nextcloud/server/blob/master/CONTRIBUTING.md) to this repository.
More information how to contribute: [https://nextcloud.com/contribute/](https://nextcloud.com/contribute/)
## Running master checkouts
Third-party components are handled as git submodules which have to be initialized first. So aside from the regular git checkout invoking `git submodule update --init` or a similar command is needed, for details see Git documentation.
Several apps that are included by default in regular releases such as [firstrunwizard](https://github.com/nextcloud/firstrunwizard) or [gallery](https://github.com/nextcloud/gallery) are missing in `master` and have to be installed manually.
That aside Git checkouts can be handled the same as release archives.
Note they should never be used on production systems.
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"’n Donker tema om u oë ’n ruskans te gee deur die algehele ligsterkte en helderheid te verminder. Dit word nog ontwikkel; rapporteer asb. enige probleme wat u ervaar.",
"High contrast mode":"Hoëkontrasmodus",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"’n Hoëkontrasmodus om u navigasie te vergemaklik. Visuele kwaliteit sal verminder word, maar die duidelikheid sal verbeter.",
"Dyslexia font":"Disleksie-font",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic is ’n gratis lettertipe/font wat ontwerp is om sommige van die algemene leesfoute wat deur disleksie veroorsaak word, te versag.",
"Accessibility":"Toeganklikheid",
"Accessibility options for nextcloud":"Toeganklikheidsopsies vir nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Bied veelvuldige toeganklikheidsopsies om u gebruik van Nextcloud te vergemaklik"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"’n Donker tema om u oë ’n ruskans te gee deur die algehele ligsterkte en helderheid te verminder. Dit word nog ontwikkel; rapporteer asb. enige probleme wat u ervaar.",
"High contrast mode":"Hoëkontrasmodus",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"’n Hoëkontrasmodus om u navigasie te vergemaklik. Visuele kwaliteit sal verminder word, maar die duidelikheid sal verbeter.",
"Dyslexia font":"Disleksie-font",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic is ’n gratis lettertipe/font wat ontwerp is om sommige van die algemene leesfoute wat deur disleksie veroorsaak word, te versag.",
"Accessibility":"Toeganklikheid",
"Accessibility options for nextcloud":"Toeganklikheidsopsies vir nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Bied veelvuldige toeganklikheidsopsies om u gebruik van Nextcloud te vergemaklik"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"المظهر الداكن يخفف من الإرهاق على عينيك، وذلك بتخفيض حدّة الإضاءة والسطوع. هذه الميزة لا تزال تحت التطوير، لهذا نود منكم الإبلاغ عن أي مشكلة قد تصادفكم.",
"High contrast mode":"وضع تباين الألوان العالي",
"Enable high contrast mode":"تفعيل وضع تباين الألوان العالي",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"وضع تباين الألوان العالي يساعدك على التنقل في الموقع بسهولة. الجودة المرئية سوف تقل بينما الوضوح سيزداد.",
"Dyslexia font":"خط خاص بالمصابين بعسر القراءة",
"Enable dyslexia font":"تفعيل الخط الخاص بالمصابين بعسر القراءة",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic خط مجاني مصمم للمساعدة على تفادي الأخطاء لمن يعانون من عسر القراءة.",
"Accessibility":"تسهيل الإستعمال",
"Accessibility options for nextcloud":"خيارات تسهيل إستعمال نكست كلاود",
"Provides multiple accessibilities options to ease your use of Nextcloud":"توفر عدة خيارات تسهيل إستعمال لتسهيل تنقلك على نكست كلاود",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"الوصول الشامل مهم جدا بالنسبة لنا. نحن نتبع معايير ويب صارمة ونتأكد من أن كل شيء يمكن إستعماله حتى دون الحاجة للفأرة أو إلى أي برامج مساعدة مثل برامج قراءة الشاشة. هدفنا أن نكون متوافقين مع {guidelines} توجيهات تسهيل إستعمال محتوى الويب {linkend} 2.1 بمستوى AA، ومتوافقين مع مظهر تباين الألوان العالي بمستوى يصل حتى إلى AAA.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"إذا واجهت أي مشاكل، لا تتردد بالإبلاغ عنها على {issuetracker} متعقب المشاكل الخاص بنا {linkend}. أما إذا أردت المشاركة في التطوير، إنضم إلى {designteam} فريق التصميم {linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"المظهر الداكن يخفف من الإرهاق على عينيك، وذلك بتخفيض حدّة الإضاءة والسطوع. هذه الميزة لا تزال تحت التطوير، لهذا نود منكم الإبلاغ عن أي مشكلة قد تصادفكم.",
"High contrast mode":"وضع تباين الألوان العالي",
"Enable high contrast mode":"تفعيل وضع تباين الألوان العالي",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"وضع تباين الألوان العالي يساعدك على التنقل في الموقع بسهولة. الجودة المرئية سوف تقل بينما الوضوح سيزداد.",
"Dyslexia font":"خط خاص بالمصابين بعسر القراءة",
"Enable dyslexia font":"تفعيل الخط الخاص بالمصابين بعسر القراءة",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic خط مجاني مصمم للمساعدة على تفادي الأخطاء لمن يعانون من عسر القراءة.",
"Accessibility":"تسهيل الإستعمال",
"Accessibility options for nextcloud":"خيارات تسهيل إستعمال نكست كلاود",
"Provides multiple accessibilities options to ease your use of Nextcloud":"توفر عدة خيارات تسهيل إستعمال لتسهيل تنقلك على نكست كلاود",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"الوصول الشامل مهم جدا بالنسبة لنا. نحن نتبع معايير ويب صارمة ونتأكد من أن كل شيء يمكن إستعماله حتى دون الحاجة للفأرة أو إلى أي برامج مساعدة مثل برامج قراءة الشاشة. هدفنا أن نكون متوافقين مع {guidelines} توجيهات تسهيل إستعمال محتوى الويب {linkend} 2.1 بمستوى AA، ومتوافقين مع مظهر تباين الألوان العالي بمستوى يصل حتى إلى AAA.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"إذا واجهت أي مشاكل، لا تتردد بالإبلاغ عنها على {issuetracker} متعقب المشاكل الخاص بنا {linkend}. أما إذا أردت المشاركة في التطوير، إنضم إلى {designteam} فريق التصميم {linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Тъмна тема, която облекчава очите ви, като намалява яркостта. Все още е в процес на разработка, затова, моля, докладвайте за всички проблеми, които откриете.",
"High contrast mode":"Висок контраст",
"Enable high contrast mode":"Активиране на режим с висок контраст",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Режим с висок контраст за улесняване на навигацията ви. Визуалното качество ще бъде намалено, но яснотата ще се увеличи.",
"Dyslexia font":"Шрифт за дислексия",
"Enable dyslexia font":"Активирай шрифт за дислексия",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic е безплатен шрифт, предназначен за смекчаване на някои от често срещаните грешки при четенето, причинени от дислексия.",
"Accessibility":"Достъпност",
"Accessibility options for nextcloud":"Опции за достъпност за nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Осигурява множество опции за достъпност за улесняване на използването на Nextcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Универсалният достъп е много важен за нас. Следваме уеб стандартите и проверяваме, за да направим всичко използваемо и без мишка, и помощен софтуер, като екранни четци. Ние се стремим да бъдем съобразени с {guidelines}Насоки за достъпност на уеб съдържанието {linkend} 2.1 на ниво АА, с темата за висок контраст дори на ниво AAA.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Ако откриете някакви проблеми, не се колебайте да ги съобщите на {issueetracker} нашия тракер на проблеми {linkend}. А ако искате да се включите, елате да се присъедините {designteam} към нашия дизайнерски екип {linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Тъмна тема, която облекчава очите ви, като намалява яркостта. Все още е в процес на разработка, затова, моля, докладвайте за всички проблеми, които откриете.",
"High contrast mode":"Висок контраст",
"Enable high contrast mode":"Активиране на режим с висок контраст",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Режим с висок контраст за улесняване на навигацията ви. Визуалното качество ще бъде намалено, но яснотата ще се увеличи.",
"Dyslexia font":"Шрифт за дислексия",
"Enable dyslexia font":"Активирай шрифт за дислексия",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic е безплатен шрифт, предназначен за смекчаване на някои от често срещаните грешки при четенето, причинени от дислексия.",
"Accessibility":"Достъпност",
"Accessibility options for nextcloud":"Опции за достъпност за nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Осигурява множество опции за достъпност за улесняване на използването на Nextcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Универсалният достъп е много важен за нас. Следваме уеб стандартите и проверяваме, за да направим всичко използваемо и без мишка, и помощен софтуер, като екранни четци. Ние се стремим да бъдем съобразени с {guidelines}Насоки за достъпност на уеб съдържанието {linkend} 2.1 на ниво АА, с темата за висок контраст дори на ниво AAA.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Ако откриете някакви проблеми, не се колебайте да ги съобщите на {issueetracker} нашия тракер на проблеми {linkend}. А ако искате да се включите, елате да се присъедините {designteam} към нашия дизайнерски екип {linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"সামগ্রিক আলোকসজ্জা এবং উজ্জ্বলতা হ্রাস করে আপনার চোখকে সহজ করার জন্য একটি অন্ধকার থিম। এটা এখনও উন্নয়ন অধীনে, তাই কোনো সমস্যা আপনি খুঁজে পেতে পারেন রিপোর্ট করুন। ",
"High contrast mode":"উচ্চ বিপরীতে মোড ",
"Enable high contrast mode":"উচ্চতর বিপরীতে মোড সক্ষম করুন",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"আপনার নেভিগেশন সহজ করতে একটি উচ্চ বিপরীতে মোড। ভিজ্যুয়াল মান হ্রাস পাবে তবে স্বচ্ছতা বাড়ানো হবে। ",
"Dyslexia font":"ডিসলেক্সিয়া হরফ",
"Enable dyslexia font":"ডিসলেক্সিয়া হরফ সক্ষম করুন",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"ওপেনডাইলেক্সিক হ'ল ফ্রি টাইপফেস / হরফ ডিজাইলেসিয়া দ্বারা সৃষ্ট কিছু সাধারণ পাঠ্য ত্রুটি প্রশমিত করার জন্য ডিজাইন করা। ",
"Accessibility":"অ্যাক্সেসযোগ্যতা",
"Accessibility options for nextcloud":"নেক্সটক্লাউডের জন্য অ্যাক্সেসযোগ্যতার বিকল্পগুলি",
"Provides multiple accessibilities options to ease your use of Nextcloud":"নেক্সটক্লাউডের আপনার ব্যবহার সহজ করার জন্য একাধিক অ্যাক্সেসিবিলিটি বিকল্প সরবরাহ করে",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"সর্বজনীন অ্যাক্সেস আমাদের জন্য খুব গুরুত্বপূর্ণ। আমরা ওয়েব স্ট্যান্ডার্ডগুলি অনুসরণ করি এবং মাউস ছাড়াই এবং স্ক্রিনড্রেডারের মতো সহায়ক সফ্টওয়্যার ছাড়াও সবকিছুকে ব্যবহারযোগ্য করে তুলতে পরীক্ষা করে দেখি। আমরা এএএ স্তরে এমনকি উচ্চতর বিপরীতে থিম সহ, এএ স্তরের {নির্দেশিকা} ওয়েব সামগ্রী অ্যাক্সেসিবিলিটি নির্দেশিকা {লিনএন্ড} 2.1 এর সাথে অনুগত হতে লক্ষ্য করি।",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"আপনি যদি কোনও সমস্যা খুঁজে পান তবে তাদেরকে আমাদের ইস্যু ট্র্যাকার {লিনএন্ড} এ প্রতিবেদন করতে দ্বিধা করবেন না} এবং আপনি যদি এতে জড়িত থাকতে চান তবে আসুন {ডিজাইনটিয়াম} আমাদের ডিজাইন দল {লিনএন্ড} এ যোগদান করুন"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"সামগ্রিক আলোকসজ্জা এবং উজ্জ্বলতা হ্রাস করে আপনার চোখকে সহজ করার জন্য একটি অন্ধকার থিম। এটা এখনও উন্নয়ন অধীনে, তাই কোনো সমস্যা আপনি খুঁজে পেতে পারেন রিপোর্ট করুন। ",
"High contrast mode":"উচ্চ বিপরীতে মোড ",
"Enable high contrast mode":"উচ্চতর বিপরীতে মোড সক্ষম করুন",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"আপনার নেভিগেশন সহজ করতে একটি উচ্চ বিপরীতে মোড। ভিজ্যুয়াল মান হ্রাস পাবে তবে স্বচ্ছতা বাড়ানো হবে। ",
"Dyslexia font":"ডিসলেক্সিয়া হরফ",
"Enable dyslexia font":"ডিসলেক্সিয়া হরফ সক্ষম করুন",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"ওপেনডাইলেক্সিক হ'ল ফ্রি টাইপফেস / হরফ ডিজাইলেসিয়া দ্বারা সৃষ্ট কিছু সাধারণ পাঠ্য ত্রুটি প্রশমিত করার জন্য ডিজাইন করা। ",
"Accessibility":"অ্যাক্সেসযোগ্যতা",
"Accessibility options for nextcloud":"নেক্সটক্লাউডের জন্য অ্যাক্সেসযোগ্যতার বিকল্পগুলি",
"Provides multiple accessibilities options to ease your use of Nextcloud":"নেক্সটক্লাউডের আপনার ব্যবহার সহজ করার জন্য একাধিক অ্যাক্সেসিবিলিটি বিকল্প সরবরাহ করে",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"সর্বজনীন অ্যাক্সেস আমাদের জন্য খুব গুরুত্বপূর্ণ। আমরা ওয়েব স্ট্যান্ডার্ডগুলি অনুসরণ করি এবং মাউস ছাড়াই এবং স্ক্রিনড্রেডারের মতো সহায়ক সফ্টওয়্যার ছাড়াও সবকিছুকে ব্যবহারযোগ্য করে তুলতে পরীক্ষা করে দেখি। আমরা এএএ স্তরে এমনকি উচ্চতর বিপরীতে থিম সহ, এএ স্তরের {নির্দেশিকা} ওয়েব সামগ্রী অ্যাক্সেসিবিলিটি নির্দেশিকা {লিনএন্ড} 2.1 এর সাথে অনুগত হতে লক্ষ্য করি।",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"আপনি যদি কোনও সমস্যা খুঁজে পান তবে তাদেরকে আমাদের ইস্যু ট্র্যাকার {লিনএন্ড} এ প্রতিবেদন করতে দ্বিধা করবেন না} এবং আপনি যদি এতে জড়িত থাকতে চান তবে আসুন {ডিজাইনটিয়াম} আমাদের ডিজাইন দল {লিনএন্ড} এ যোগদান করুন"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Un tem teñval evit distanañ ho taoulagad en ur vihanaat ar sklêrijenn. War ziorren emañ c'hoazh, setu ma c'hallit kas deomp hoc'h evezhiadennoù.",
"High contrast mode":"Mod dargemm uhel",
"Enable high contrast mode":"Aotren mod an dargemm uhel",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Ur mod dargemm uhel evit aesaat ho merdeiñ. Bihanaet e vo ar c'halite met brasaet e vo ar spisder eta.",
"Dyslexia font":"Font a-enep an dislegiezh",
"Enable dyslexia font":"Aotren ar font a-enep an dislegiezh",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic a zo ur font digoust soñjet evit disteraat ar fazioù lenn pennañ deuet diwar dislegiezh.",
"Accessibility":"Monedusted",
"Accessibility options for nextcloud":"Arventennoù monedusted Nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Pourveziñ a ra meur a arventenn vonedusted evit simplaat implij Nexcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Hollbouezus eo deomp ar vonedusted hollvedel. Heuliañ a reomp ar standardoù web ha gwiriañ a reomp hag-eñ e c'hall mat pep tra bezañ implijet hep logodenn zoken, ha gant meziantoù skoazellañ evel \"lennerioù skramm\". Klask a reomp doujañ da {guidelines}Reolennoù monedusted endalc'hadoù ar Web{linkend} 2.1 gant ul live AA, gant an tem gantañ un dargemm bras, d'al live AAA zoken.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Mar kavit un draen bennak, na dermit ket da reiñ deomp da c'houzout war {issuetracker}hor benveg dizreinañ{linkend}. Ha mar fell deoc'h kemer perzh e viot degemeret mat en {designteam}hor skipailh dezagn{linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Un tem teñval evit distanañ ho taoulagad en ur vihanaat ar sklêrijenn. War ziorren emañ c'hoazh, setu ma c'hallit kas deomp hoc'h evezhiadennoù.",
"High contrast mode":"Mod dargemm uhel",
"Enable high contrast mode":"Aotren mod an dargemm uhel",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Ur mod dargemm uhel evit aesaat ho merdeiñ. Bihanaet e vo ar c'halite met brasaet e vo ar spisder eta.",
"Dyslexia font":"Font a-enep an dislegiezh",
"Enable dyslexia font":"Aotren ar font a-enep an dislegiezh",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic a zo ur font digoust soñjet evit disteraat ar fazioù lenn pennañ deuet diwar dislegiezh.",
"Accessibility":"Monedusted",
"Accessibility options for nextcloud":"Arventennoù monedusted Nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Pourveziñ a ra meur a arventenn vonedusted evit simplaat implij Nexcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Hollbouezus eo deomp ar vonedusted hollvedel. Heuliañ a reomp ar standardoù web ha gwiriañ a reomp hag-eñ e c'hall mat pep tra bezañ implijet hep logodenn zoken, ha gant meziantoù skoazellañ evel \"lennerioù skramm\". Klask a reomp doujañ da {guidelines}Reolennoù monedusted endalc'hadoù ar Web{linkend} 2.1 gant ul live AA, gant an tem gantañ un dargemm bras, d'al live AAA zoken.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Mar kavit un draen bennak, na dermit ket da reiñ deomp da c'houzout war {issuetracker}hor benveg dizreinañ{linkend}. Ha mar fell deoc'h kemer perzh e viot degemeret mat en {designteam}hor skipailh dezagn{linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Koristite tamnu temu da bi smanjili napetost u očima smanjenjem luminiscencije i svijetla pozadine. Tema je još uvijek u razvojnoj fazi, molimo da prijavite greške ako ih primjetite. ",
"High contrast mode":"Mod visokog kontrasta",
"Enable high contrast mode":"Aktiviraj mod visokog kontrasta",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Mod visokog kontrasta kako bi vam olakšali navigaciju, vizuelno će kvalitet biti reduciran ali jasnoća prikaza se povećava ",
"Dyslexia font":"Font za disleksičare",
"Enable dyslexia font":"Aktiviraj font za disleksičare"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Koristite tamnu temu da bi smanjili napetost u očima smanjenjem luminiscencije i svijetla pozadine. Tema je još uvijek u razvojnoj fazi, molimo da prijavite greške ako ih primjetite. ",
"High contrast mode":"Mod visokog kontrasta",
"Enable high contrast mode":"Aktiviraj mod visokog kontrasta",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Mod visokog kontrasta kako bi vam olakšali navigaciju, vizuelno će kvalitet biti reduciran ali jasnoća prikaza se povećava ",
"Dyslexia font":"Font za disleksičare",
"Enable dyslexia font":"Aktiviraj font za disleksičare"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Tema fosc que ajuda els ulls reduint la lluminositat i la brillantor general. Com que encara es troba en desenvolupament, agrairem que informeu de les errades que hi pugueu trobar.",
"High contrast mode":"Mode de contrast alt",
"Enable high contrast mode":"Habilita el mode de contrast alt",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Mode de contrast alt per a facilitar la navegació. La qualitat visual es reduirà però s'incrementarà la claredat.",
"Dyslexia font":"Tipus de lletra per a la dislèxia",
"Enable dyslexia font":"Habilita el tipus de lletra per a la dislèxia",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic és un tipus de lletra gratuït dissenyat per a mitigar alguns dels errors de lectura habituals causats per la dislèxia.",
"Accessibility":"Accessibilitat",
"Accessibility options for nextcloud":"Paràmetres d'accessibilitat del Nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Proporciona diversos paràmetres d'accessibilitat per a facilitar-vos l'ús del Nextcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"L'accés universal és molt important per a nosaltres. Seguim els estàndards web i comprovem que tot es pugui utilitzar també sense el ratolí i amb programes d'assistència, com ara els lectors de pantalla. Volem complir les {guidelines}Pautes d'accessibilitat del contingut web{linkend} 2.1 a nivell AA i amb el tema de contrast alt fins i tot a nivell AAA.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Si trobeu cap problema, no dubteu a informar-ne al {issuetracker}nostre gestor d'errors{linkend}. Si a més voleu implicar-vos, uniu-vos al {designteam}nostre equip de disseny{linked}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Tema fosc que ajuda els ulls reduint la lluminositat i la brillantor general. Com que encara es troba en desenvolupament, agrairem que informeu de les errades que hi pugueu trobar.",
"High contrast mode":"Mode de contrast alt",
"Enable high contrast mode":"Habilita el mode de contrast alt",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Mode de contrast alt per a facilitar la navegació. La qualitat visual es reduirà però s'incrementarà la claredat.",
"Dyslexia font":"Tipus de lletra per a la dislèxia",
"Enable dyslexia font":"Habilita el tipus de lletra per a la dislèxia",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic és un tipus de lletra gratuït dissenyat per a mitigar alguns dels errors de lectura habituals causats per la dislèxia.",
"Accessibility":"Accessibilitat",
"Accessibility options for nextcloud":"Paràmetres d'accessibilitat del Nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Proporciona diversos paràmetres d'accessibilitat per a facilitar-vos l'ús del Nextcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"L'accés universal és molt important per a nosaltres. Seguim els estàndards web i comprovem que tot es pugui utilitzar també sense el ratolí i amb programes d'assistència, com ara els lectors de pantalla. Volem complir les {guidelines}Pautes d'accessibilitat del contingut web{linkend} 2.1 a nivell AA i amb el tema de contrast alt fins i tot a nivell AAA.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Si trobeu cap problema, no dubteu a informar-ne al {issuetracker}nostre gestor d'errors{linkend}. Si a més voleu implicar-vos, uniu-vos al {designteam}nostre equip de disseny{linked}!"
"Enable dark theme":"Používat tmavý motiv vzhledu",
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Tmavý motiv vzhledu pro ulevení vašim očím snížením celkové svítivosti a jasu. Jeho vývoj zatím ještě není zcela dokončen, proto prosíme hlaste jakékoli problémy, se kterými se setkáte.",
"High contrast mode":"Režim s vysokým kontrastem",
"Enable high contrast mode":"Zapnout režim s vysokým kontrastem",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Režim s vysokým kontrastem pro usnadnění orientace při pohybu po aplikaci. Vizuální kvalita bude snížena, zato zřetelnost se zlepší.",
"Dyslexia font":"Písmo pro dyslektiky",
"Enable dyslexia font":"Používat písmo pro dyslektiky",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic je bezplatné písmo (font) navržené tak, aby odpomáhalo od některých běžných chybování při čtení, způsobených dyslexií.",
"Accessibility":"Zpřístupnění",
"Accessibility options for nextcloud":"Předvolby v Nexcloud pro zpřístupnění",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Poskytuje vícero možností pro zpřístupnění a tím usnadnění používání Nextcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Přístupnost pro všechny je pro nás velmi důležitá. Splňujeme webové standardy a zajišťujeme, aby všechno bylo použitelné i bez myši a s asistenčním software, jako například čtečkami obrazovky. Máme za cíl být v souladu s doporučeními {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 na úrovni AA, při použití motivu vzhledu s vysokým kontrastem dokonce na úrovni AAA.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Pokud naleznete jakékoli problémy, neváhejte s jejich nahlášením do {issuetracker}našeho systému pro správu hlášení{linkend}. A pokud se chcete zapojit, přidejte se k {designteam}týmu našich designérů{linkend}!"
"Enable dark theme":"Používat tmavý motiv vzhledu",
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Tmavý motiv vzhledu pro ulevení vašim očím snížením celkové svítivosti a jasu. Jeho vývoj zatím ještě není zcela dokončen, proto prosíme hlaste jakékoli problémy, se kterými se setkáte.",
"High contrast mode":"Režim s vysokým kontrastem",
"Enable high contrast mode":"Zapnout režim s vysokým kontrastem",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Režim s vysokým kontrastem pro usnadnění orientace při pohybu po aplikaci. Vizuální kvalita bude snížena, zato zřetelnost se zlepší.",
"Dyslexia font":"Písmo pro dyslektiky",
"Enable dyslexia font":"Používat písmo pro dyslektiky",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic je bezplatné písmo (font) navržené tak, aby odpomáhalo od některých běžných chybování při čtení, způsobených dyslexií.",
"Accessibility":"Zpřístupnění",
"Accessibility options for nextcloud":"Předvolby v Nexcloud pro zpřístupnění",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Poskytuje vícero možností pro zpřístupnění a tím usnadnění používání Nextcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Přístupnost pro všechny je pro nás velmi důležitá. Splňujeme webové standardy a zajišťujeme, aby všechno bylo použitelné i bez myši a s asistenčním software, jako například čtečkami obrazovky. Máme za cíl být v souladu s doporučeními {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 na úrovni AA, při použití motivu vzhledu s vysokým kontrastem dokonce na úrovni AAA.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Pokud naleznete jakékoli problémy, neváhejte s jejich nahlášením do {issuetracker}našeho systému pro správu hlášení{linkend}. A pokud se chcete zapojit, přidejte se k {designteam}týmu našich designérů{linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Et mørk tema, venligere for øjnene ved at dæmpe lysstyrken. Det er stadig under udvikling så indberet venligst alle problemer du måtte finde.",
"High contrast mode":"Højkontrasttilstand",
"Enable high contrast mode":"aktiver højkontrasttilstand",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"En højkontrasttilstand letter navigationen. Presentation af lavere kvalitet, men tydeligere.",
"Dyslexia font":"Skrifftype for ordblinde",
"Enable dyslexia font":"aktiver skrifftype for ordblinde",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic er en gratis skrifttype designet til at undgå læsefejl pga. ordblindhed",
"Accessibility":"Handicapvenlig",
"Accessibility options for nextcloud":"Handicapvenlige indstillinger for nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Tilbyder flere handicapvenlige indstillinger til at lette brugen af Nextcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Universel adgang er meget vigtig for os. Vi følger web standarder og sikrer os at gøre alt tilgængeligt også uden mus, eller med hjælpesoftware såsom screenreaders. Vi søger at følge reglerne{guidelines}Web Content Accessibility Guidelines{linkend} 2.1 og AA endda med højt kontrast tema på AAA niveau.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Tøv ikke med at rapportere problemer på vores issuetracker {issuetracker} hvis du finder nogen{linkend}. Og hvis du vil deltage, så kom med {designteam} i vores designteam{linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Et mørk tema, venligere for øjnene ved at dæmpe lysstyrken. Det er stadig under udvikling så indberet venligst alle problemer du måtte finde.",
"High contrast mode":"Højkontrasttilstand",
"Enable high contrast mode":"aktiver højkontrasttilstand",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"En højkontrasttilstand letter navigationen. Presentation af lavere kvalitet, men tydeligere.",
"Dyslexia font":"Skrifftype for ordblinde",
"Enable dyslexia font":"aktiver skrifftype for ordblinde",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic er en gratis skrifttype designet til at undgå læsefejl pga. ordblindhed",
"Accessibility":"Handicapvenlig",
"Accessibility options for nextcloud":"Handicapvenlige indstillinger for nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Tilbyder flere handicapvenlige indstillinger til at lette brugen af Nextcloud",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Universel adgang er meget vigtig for os. Vi følger web standarder og sikrer os at gøre alt tilgængeligt også uden mus, eller med hjælpesoftware såsom screenreaders. Vi søger at følge reglerne{guidelines}Web Content Accessibility Guidelines{linkend} 2.1 og AA endda med højt kontrast tema på AAA niveau.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Tøv ikke med at rapportere problemer på vores issuetracker {issuetracker} hvis du finder nogen{linkend}. Og hvis du vil deltage, så kom med {designteam} i vores designteam{linkend}!"
"A dark theme to ease your eyes by reducing the overall luminosity and brightness. It is still under development, so please report any issues you may find.":"Ein dunkles Design, das die Augen entspannt, indem es die allgemeine Lichtstärke und Helligkeit reduziert. Es befindet sich noch in der Entwicklung, also melde bitte alle Probleme, die Du findest.",
"High contrast mode":"Kontrastreicher Modus",
"Enable high contrast mode":"Kontrastreichen Modus aktivieren",
"A high contrast mode to ease your navigation. Visual quality will be reduced but clarity will be increased.":"Ein kontrastreicher Modus, der die Navigation erleichtert. Die Bildqualität wird reduziert, die Klarheit jedoch erhöht.",
"OpenDyslexic is a free typeface/font designed to mitigate some of the common reading errors caused by dyslexia.":"OpenDyslexic ist eine freie Schriftart, die entwickelt wurde, um einige der häufigsten Lesefehler, die durch Legasthenie verursacht werden, zu reduzieren.",
"Accessibility":"Barrierefreiheit",
"Accessibility options for nextcloud":"Optionen zur Barrierefreiheit in Nextcloud",
"Provides multiple accessibilities options to ease your use of Nextcloud":"Bietet verschiedene Optionen für Barrierefreiheit, um die Nutzung von Nextcloud zu erleichtern.",
"Universal access is very important to us. We follow web standards and check to make everything usable also without mouse, and assistive software such as screenreaders. We aim to be compliant with the {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 on AA level, with the high contrast theme even on AAA level.":"Der universelle Zugang ist für uns sehr wichtig. Wir halten uns an Webstandards und prüfen, ob alles auch ohne Maus und unterstützende Software wie Screenreader nutzbar ist. Wir streben die Einhaltung der {guidelines}Web Content Accessibility Guidelines{linkend} 2.1 auf AA-Niveau an, mit dem kontrastreichen Design sogar auf AAA-Niveau.",
"If you find any issues, don’t hesitate to report them on {issuetracker}our issue tracker{linkend}. And if you want to get involved, come join {designteam}our design team{linkend}!":"Wenn Du Fehler findest, melde sie bitte im {issuetracker}Problemverfolgungssystem{linkend}. Und wenn Du mithelfen willst, trete dem {designteam}Designteam{linkend} bei!"
},
"nplurals=2; plural=(n != 1);");
Some files were not shown because too many files have changed in this diff
Show More